updated to new radio then downgraded to adp1.1 radio now i get no data connection... can still make calls and send text just NO DATA...and its pissing me off
i got jf1.5 with black gloss theme overclocked to 528
Related
HI i have a MDA Compact and upgraded from 1.11 qtec rom to 1.12 with bigstore patch applied. The phone seem to be fine but some times when i go to make a call it does'nt seem to dial just sits there saying dialing. If I hang up and leave the phone for 5 mins it seems to go back to normall.
Signal strength is fine, 4 bars & i am calling a landlline thats not engaged.
Would upgrading the radio stack help? Is there a guide on how to do this.
Thanks in advance
I have an unlocked SDA on a Cingular Blue Account with the White ATT SIM. I am frequently missing calls (no rings) and receive no voicemail or missed call indicators for the calls. It does not happen all the time, and my attempts to replicate the problem have been unsuccessful. My phone is not overclocked and the problem is not limited to times when I am using GPRS data.
I am using the i-mate rom and radio update:
Operator Version: 2.6.331.2
Radio Version: 4.1.13.19_02.37.01
Any ideas?
Hey,
I was having the same problem after I upgraded the radio. I have switched back to radio version 4.0.13.25_01.14.00 and have not had any problems.
qtek 8300
rom version 2.0.9.0
operator version 2.6.311.1
Thanks for the feedback. I'm glad someone else had this problem and was able to solve it. I'm very surprised I haven't found any documented occurences of this problem with so many people changing ROMs. I bought the phone used, and it came locked with the T-Mobile ROM. I updated the ROM right after unlocking it, so I don't know if the missed call problem existed with the original ROM. However, I have now switched to the Cingular ROM and it appears to be working better. I guess I'll have a better idea if it's completely fixed in a few days.
rom version 2.0.13.0
operator version 2.8.42.22
radio version 4.1.13.12_02.25.01
i want to keep it constant on, like i had on wm5.
Start - Settings - System - registry wizard - tweaks3 -GPRS Always ON
that eliminates most of the reconnects but not all of them.
that doesn't work.
i'm using a tracking software and to get the LAC and the CID for the cell that i'm into the connection has to drop. when i used faria's AKU3.3 with crossbow icons i used that tweak and it worked on WM6 doesn't
mrjay said:
that doesn't work.
i'm using a tracking software and to get the LAC and the CID for the cell that i'm into the connection has to drop. when i used faria's AKU3.3 with crossbow icons i used that tweak and it worked on WM6 doesn't
Click to expand...
Click to collapse
It depends on what radio you are using. The only radio that I know of that will not cause GPRS connection issues is 2.19. Anything higher than that has problems reconnecting to GPRS if you lose signal.
The problem is that 2.19 doesn't have coverage as good as the other radios. Someone is working on a fix for the 2.61 radio stack with Faria. the thread is over in the Wizard upgrading forum.
No problem 2.61
I have 2.61 Radio ROM and no Problem. Imedeatelly I disconnect phonecall, GPRS is reconnecting. Very fast. German T-Mobile settings. And no problem. Using octratalk and have no problems beeing connected to googletalk, icq and msn.
papamopps said:
I have 2.61 Radio ROM and no Problem. Imedeatelly I disconnect phonecall, GPRS is reconnecting. Very fast. German T-Mobile settings. And no problem. Using octratalk and have no problems beeing connected to googletalk, icq and msn.
Click to expand...
Click to collapse
You are lucky then. It seems most people trying to run 2.61 on any of the WM6 ROMs have issues. I put it on MBE version and immediately had missed calls and SMS message (yes, coverage was excellent, and very quick to acquire GPRS connection and all, but calls would go straight to VM for no reason one time, and come through the next). Never had this issue with 2.61 on AKU 3.3 or stock 2.25 ROMs.
I also put it on Faria's WM6 ROM and had a similar experience. Not even trying 2.61 on the mUn ROM.
Hey guys. I have been upgrading my 8125 with various different WM6 roms and somewhere along the line I lost me text messaging capability. It just says the the text message cannot be delivered. I have checked the setting and the number for the service center and all that is fine. Anybody have any idea what the heck is going on? corrupted DLL file perhaps? It doesn't matter to what windows (WM5 or WM6) I go to, the problem still follows. Any help in this matter is greatly appreciated.
ps. My signature should have all the info of my phone except I am running Xplore 1.1 rom now
do you have Cingular service? if you do, the current radio rom that you are running isnt good. you want the t-mobile UK 2.19 radio rom. it is much better for us cingular/at&t users. hope i helped
-Nstefanelli-
I have Rogers which is a canadian provider. I am using a sim unlocked cingular 8125.
Try the 2.19 radio you can install it alone without changing your rom .
this is The 2.19 radio link
ftp://xda:[email protected]_Thread/T-Mobile-UK_2.19.11_Radio_Only.zip
i think that most of us using this Radio
Good Luck
i tried the 2.19 radio rom with no luck. i have tried the 2.69 as well as the 2.61 roms and all have the same problem. the text msg does not go throug, jus gives me the error "The text message cannot be sent". thanks for your help though.
Hey Folks,
I use Duttys Hybrid v2 (dutty i salute you) and got this Protocol Version : 25.74.40.02W. I remeber that i had a protocol version without W before various flashings but I cant figure out where i 'lost' it... But i need my old one back!
Why?
I cant get a 3G connection. From what i found here is the reason for this problem my Protocol version.
W means GSM (900/1800/1900) and UMTS (2100 anly)
H means GSM (850/900/1800/1900Mhz) and UMTS (850/1900/2100Mhz)
I think that i need a protocol version with H or maybe even without any letter (like my original one was)
How can i do this?
I tried to flash some Radios like Niki, Polaris etc. but the Protocol Version stays the same....
Location:
Germany/Europe
thx for every little help
seems to me like the radio islocked or something. cause even when i tried to flash back to duttys FIRST hybrid release the kaiser stared to add a letter to the Protocol version which he never did when i used the hybrid v1 back in the day
Can you select Start->Settings->System->Device Information.
Then note and post the radio version, and we'll see who can help. You may have the 'radio from hell' flashed.
Atm i flashed to the shipped HTC
RUU_Kaiser_HTC_GER_3.28.407.0_radio_sign_25.83.40.02_1.65.16.25
Radio in here is1.16.16.25
protocol 25.83.40.02H
But maybe i had that "'hell' radio before? is it a real radio or just called 'hell'?
sorry
radio is 1.65.16.25
protocol 25.83.40.02H
ckain said:
sorry
radio is 1.65.16.25
protocol 25.83.40.02H
Click to expand...
Click to collapse
Hey ckain,
in your first reply you said that you have flashed a wrong protocol into your Kaiser. "I use Duttys Hybrid v2 (dutty i salute you) and got this Protocol Version : 25.74.40.02W"
In your last reply your settings are:
radio is: 1.65.16.25
protocol: 25.83.40.02H
With te "H"...
W means GSM (900/1800/1900) and UMTS (2100 anly)
H means GSM (850/900/1800/1900Mhz) and UMTS (850/1900/2100Mhz)
Could it be that you don't see the 3G icon in the upper taskbar like the original taskbar does...?!
I've got the Dutch original HTC Rom radio: 1.65.16.25 & protocol: 25.83.40.02H
Greetz,
Nox
Yea i flashed from duttys v2 (with W) to the german shipped HTC original with a H.
With both versions i am not able to connect to 3G networks. I see the symbol but i have to disable 3G in commanager to get a connection established, which of course hasnt the 3G speed.
My UMTS sim card is working in other phones with 3G.
Correct me if i am wrong but i remember that protocol versions normally looked like 25.83.40.02. without W, H or any other letters?!
thx a lot for your help anyways
Well on my Kaiser I don't get the 3G icon. But my HSDPA icon is still running...
So on that approuch I think that if it could connect to HSDPA you also can connect to 3G.
Correct me if I'm wrong.
EDIT: Also when I'm going to the setting, Start-->Settings-->Connections-->Connections, and want to change my T-Mobile Internet settings it says that he will make contact with a GPRS, 3G connection...
Are you able to place voice calls while on 3G, and if not see here.....
http://forum.xda-developers.com/showthread.php?t=335074
Thank you so much JohnJonsten. The link is my EXACT issue with the kaiser. cause like all of them i am not able to log in a 3G network....
thank you so much