dear sir,
understand that you are a expert on fuze, may i ask you a tweak that may be u can help me.
after i press the lower left "phone pick up" key, the phone will change to a dial pad page, i would like to change the left soft key from "video call" call to "contact" is there any tweak can do that?
i have also post this thread in diamond forum.
thanks in advance
http://www.google.com/cse?cx=000825...ialer&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
Related
Hey Is they a way of instructing the XDAII to rediala number when it is engaged
Or is they a third p[arty software thet can do it?
Cheers
Gigino
yes it is
Just press again the green touch on the paddle (talk) and the number is dial again....
Automatic redial on busy
Fl 9500 said:
Just press again the green touch on the paddle (talk) and the number is dial again....
Click to expand...
Click to collapse
This is a small help, but I was hoping for something better. On my previous Motorola phone, if I called a busy number, it gave me a "Redial?" prompt. If I said "yes", it would automatically keep redialling until the number became free, then give a ring tone to warn me to pick up. This is much better than having to keep pressing the green button (especailly if my wife is on the internet for 2 hours!).
It would be great to have a little app on the XDA2 to do this...
Try this:
http://www.pocketmax.net/redial.html
Regards,
Nika.
I can't enter settings on my diamond
Probably because you have Manila 2D. Install a program called Second Today to have your original screen to access the settings, or temporarily disable M2D by turning Touchflo off in your Home settings...
Is there a way to make a shortcut from the scrollwheel,so you just have to press the wheel to get in to the last called numbers list?
Would be much more easy to make call with one hand..
Sorry for my bad english
If you press the green phone button, you will pull up and be able to redial the last number you called.
OMG are you kidding me push the GREEN TALK BUTTON and the last call is right there then push the GREEN TALK BUTTON AGAIN and thats it.. So a total of 2 yes a whole 2 button pushes.....
Is it just the last number or do you get a list with numbers ?
Sorry...I dont have a TyTn II myself..Just tested a friends.
Edit
I want to go direct to the list with all my last called numbers,not just the last.
You now what i mean ?
Im not so good at english :-/
on my 8525 there was a box on my dialpad that listed all recent calls, right from the dialer you could scrool down to select any previous number in the order they were called. i believe this is what the poster is talking about. i can not remember what it was called but i would like it on the tilt as well, it basically replaced the standard smart dialer with one that listed call history. anyone have this?
Green Phone button - Up on the 4 way pad
That will get you to the recent call list - 2 buttons pressed
Ok..Thanks
nice tip, thanks!
(And by the way, it's the left or down key to get to Speed Dial.) However, one problem is neither of those works if the keypad isn't showing and you just have the Call History and other buttons up there (with Keypad being the left soft key option). Anyone know if there's a reg hack to make the keyboard stay up there permanently? Thanks.
Also, with the keyboard displayed, you can use the scroll wheel up to get last called, or scroll wheel down to get speed dial numbers.
Hello....first off, thanx to Dutty. Been using dualtouch v3 rom on my att tilt and it works great. donation will be coming soon.
does anyone know how i can change what the soft key screen options are when i am receiving a call? currently my option are "silence" and "send text". am i able to change them to "answer" and "ignore"? I know i can do these things with the call and end buttons but its easier with the screen.
also, is there a way to make my soft keys light up when i am receiving a call? i thanx,
jacob
You need a matching dialer, but i cannot tell you, which one and where to get it. You might ask one of our chefs (ROM builder).
jake2071 said:
Hello....first off, thanx to Dutty. Been using dualtouch v3 rom on my att tilt and it works great. donation will be coming soon.
does anyone know how i can change what the soft key screen options are when i am receiving a call? currently my option are "silence" and "send text". am i able to change them to "answer" and "ignore"? I know i can do these things with the call and end buttons but its easier with the screen.
also, is there a way to make my soft keys light up when i am receiving a call? i thanx,
jacob
Click to expand...
Click to collapse
How about tapping down (or up/left/right) on the 5-way nav to make it light up?
I personally don't mind using the green/red buttons since it's SOO redundant to duplicate with the soft-keys also. It's somewhat more Treo-like also.
bump... did a search and couldn't find anything
I would like to know the answer as well? Does anybody know how to do it?
Me2..
.. glad to know I'm not the only one who's annoyed with the softkey option that comes with the touchdual. The dialer is awesome and I'm using it on my Tilt. I like the feature where it asks if I wish to save a first time answered number..
I'd like to get two "tweaks" for the DualTouch dialer..
1. The same as Jake where I'd like to switch the softkeys function while receiving a call during conversation.. to answer and ignore.. better still, i'd take conference and ignore, if thats possible.
2. I would like to have a conference button get automatically activated on the status screen where there are the six buttons that one can tap while in call. So, this way when I dial the third line to enable conferencing, I won't have to open the options softkey and then tap on the tiny conference option...
Hope I didn't sound twisted..
Tilt with Alex's WM6.1 Rom.
Check here
Check out the link below. Look for 'Change your soft keys' or something like that and see if that helps.
http://forum.xda-developers.com/showthread.php?t=383904
~Gwen
I saw another post about this, but couldn't find it again, sorry...
In HTC WM 6.1, when you press "Call" (green) button and dial to look through your contacts, when you get to the contact you want and press "action" button it starts a call.
Previously, in WM 6, "action" button" would open the contact so you can see contact's phone numbers. Only if you pressed the Call button over the contact it would place the call.
I remember somebody answered that in WM 6.1 you could still browse through the contact numbers using the "right" and "left" buttons of dial pad. But this way you don't see the numbers, just see if it is "work", "home", "pager" numbers etc.
I do want to OPEN the contacts when pressing "action" button as sometimes you need to consult numbers. Summing up, I want it to work as in WM 6.
Is there a registry change to make it work? I would appreciate any help on this. Thanks.
I'm not sure what you mean. When you click on the green button, you go see the dialers. There are two types of dialers, the HTC and the windows mobile. The HTC one has the one which you can press right left to get Cell Work Home and see the numbers when you highlight it. The other one is the normal one which you don't see the numbers. This isn't a change in WM6.1. It's just using the different type of dialer. You can use Schaps advance configuration to change the dialer to windows mobile or HTC.
Thanks. I am talking about the HTC dialer. I attached an image (38_screen).
As you said "the HTC one has the one which you can press right left to get Cell Work Home and see the numbers when you highlight it" (if you enabled "Automatically expand selected contact" on smart dialing options, otherwise it appears the contact's name and besides just w, h, p...).
But, in WM 6 when you highlight the contact you have to press the "green" button to start the call. If you press the "action" button it "opens the contact" as in the second picture (pc_capture).
In WM 6.1 if you press "action" or "green" the result is the same: the call starts.
The behavior in Wm 6 is more convenient because you use the same procedure to reach the contact to either place a call or to search/edit your contacts.
1.- First I wanna know how to add buttons to the Button manager... i mean Settings > Buttons > the box where the "button 1 (hold)" should be isn't there... just a "repeat Control" and "repeat Speed" slider... (note to readers, i'm using a spanish rom, i'm not sure if this is exactly what it says in the english rom but it should be similar).
1.5.- Also, i have another phone (the first one is a Motosurf and the second is a HTC Touch Viva) and it does have the box "assign app to button" (or something like that, read previous note), but it just displays one button, the "Send" key and it's mapped as "button 1 (hold)".
Is there a way to add more buttons? so i can add the volume up or volume down and the "end key" (hold) options???
2.- And the final and most importatn question is if there's a way to activate the windows default task manager on the motosurf, the one that looks like an arrow pointing downwards on the home screen... i know that some roms have it and some don't (i had that experience on the touch viva), but i want to know if there is a way to just activate it on the stock rom without flashing.
Thanks in advance for any help that you can give me, and sorry if my english is poor and for the lack of screenshots to explain myself better.
su8044 said:
1.- First I wanna know how to add buttons to the Button manager... i mean Settings > Buttons > the box where the "button 1 (hold)" should be isn't there... just a "repeat Control" and "repeat Speed" slider... (note to readers, i'm using a spanish rom, i'm not sure if this is exactly what it says in the english rom but it should be similar).
1.5.- Also, i have another phone (the first one is a Motosurf and the second is a HTC Touch Viva) and it does have the box "assign app to button" (or something like that, read previous note), but it just displays one button, the "Send" key and it's mapped as "button 1 (hold)".
Is there a way to add more buttons? so i can add the volume up or volume down and the "end key" (hold) options???
2.- And the final and most importatn question is if there's a way to activate the windows default task manager on the motosurf, the one that looks like an arrow pointing downwards on the home screen... i know that some roms have it and some don't (i had that experience on the touch viva), but i want to know if there is a way to just activate it on the stock rom without flashing.
Thanks in advance for any help that you can give me, and sorry if my english is poor and for the lack of screenshots to explain myself better.
Click to expand...
Click to collapse
If you're a programmer you can probably change it.
If you want the software to change the buttons that you can't change, than you should buy AEVButton Plus. http://ae.inc.ru/aebplus.php
Otherwise you can only change the buttons that the settings allows you to.