Hello to all!
After I've upgraded my Magician to 1.13 I recognized my screen disaligns after 5 minutes of use. The I've downgraded to 1.12, but the disalign still stays. After browsing the forum I've recognized that much people have the same problem too. Some guy says that you should downgrade your ROM, or take the unit to the HTC European Service (if you have guarantee).
After browsing in the registry, I've found a regkey about Calibration. I modified it, and now the machine runs good, without disaligning.
So the method is the next:
1. Open your favourite Regeditor (Resco, Total Commander etc.)
2. Open HKLM/HARDWARE/DEVICEMAP/TOUCH/
3. Open CalibrationData You will see coordinates.
- The first coordinate is always x coordinate, so that is the horizontal
- The second coordinate is alwasy the y coordinate, so that is the vertical
- The first number pair (ex.: x,y) is the center point
- The second one is the upper left
- The third one is the bottom left
- The fourth is the bottom right
- and the last one is the upper right
My screen calibration is:
474,498 814,773 814,228 119,228 119,773
I hope it will help to guys who has the same problem.
If someone finds better calibrate coordinates, pls post it.
Cheers,
cheers for this , I have the same problem and have tried many different tweaks with no result.
My co-ordinates were different but then I was getting a mis-alignment problem I will give your co-ordinates a go and report back.
mine has no issue or whatsoever. working fine since...
my coordinates are:
502,498,862,771 859,223 138,229
hope this helps...
Never got no problems with it.
Coordinates are:
499,503 861,774 856, 231 148,223 142, 773
What a great discovery
Mine is a HTC Charmer (MDA Compact 2) on WM5. My data is very different
1928, 1960 3308, 617 3296, 3316
(WARNING! THIS IS NOT Magician configuration!)
can u tell me more in details pls coz i have the same problem. I must align the Screen oftenly
u wrote : Open your favourite Regeditor (Resco, Total Commander etc.)
Where can i fin this programme ?
pls help. Tks
i found the total comander and do wat exactly wat u say.
But the my problem doesnt solve
calibration data 2020i alpine
i have resive one devise with problems in alighn screen first my thought was that the problem was at rom and the extrom that was missing after lot of trying and with resco registry i found that the calibration data was missing pls pls if any one can help me by posting the coordinates of that device QTEK 2020i
Why don't you ask in the matching topic?
hey guys can you make a permanent fix for the disalignment bug of xda mini?
i have this problem...but i got a solution on this topic,but the problem is when you hardreset the ppc its going back again the problem unless you tweak it again in regeditor...
can the rom developers include this tweak for the upcoming cook rom for xda mini so that the screen disalignment can be fix...
thanks
to HyperMalac:
so, the solution is to change the coordinates with yours?? hmmm ok i will try it.. i (and my friend here) have the same problem. i thought this is LCD problem and cannot be fixed unless u change the lcd (as 1 of the member said) thx~! i'll let you know~!
not working
i have to constantly align my screen and even putting in the coordinates..it still doesn't work. I will be sending it back to the repair centre sooon.
dear all,
I want to ask how to open the registry in the WM2003?
I've installed the Total Commander, but after that I still confused what to do next.
many thanks
Open TC and open the "folder" named: \\. this \\ folder contains the registry...
NEWS:
Finally I've took my Magician to the HTC Europe Service Center...Waiting, for solution....Will post the result
Cheers
hypermalac....
so the reconfiguration in registry do not solve the screen missalignment problem? Coz I've try, but it seems no result, only the frequent of screen become missalign is decrease...
any solution for this?
Well, the registry modding, only reduced the misaligns, for me too. I saw somewhere on this forum that this problem is hardware problem, but I don't think so. Someone said, that the touchscreen has a factory malfunction. Anyway I'd took it to the service, an as soon as I get it back, I will post, if it's solved the problem, or not.
Cheers
@HyperMalac:
well, when u get ur mini back from service centre, ofcourse it will be fixed, no more sreen disaligned, for sure..
now, the problem is, why this happend to many people (from different countries) ?? can you ask the service center while they keep your mini : what is wrong with xda2 mini lcd?? why this disaligment happend? how can we avoid this?? how to fix (without send back to factory) etc etc.. please ask, if possible, ofcoz... thx alot
FYI, this is not the only problem that many xda2mini from difference countries get. other problem is after take the battery out for only 5 secs, you will get HARD reset. the backup battery is not functioning~! happend to me~! then sent mine to factory, they fix it but strangely, they change the MOTHERBOARD~!
ah, i think someting is wrong with HTC.....
erwinsie said:
@HyperMalac:
well, when u get ur mini back from service centre, ofcourse it will be fixed, no more sreen disaligned, for sure..
now, the problem is, why this happend to many people (from different countries) ?? can you ask the service center while they keep your mini : what is wrong with xda2 mini lcd?? why this disaligment happend? how can we avoid this?? how to fix (without send back to factory) etc etc.. please ask, if possible, ofcoz... thx alot
FYI, this is not the only problem that many xda2mini from difference countries get. other problem is after take the battery out for only 5 secs, you will get HARD reset. the backup battery is not functioning~! happend to me~! then sent mine to factory, they fix it but strangely, they change the MOTHERBOARD~!
ah, i think someting is wrong with HTC.....
Click to expand...
Click to collapse
Well, when I get it back, I'll ask your questions, if it's possible, and I hope too that the service give some solution for us, to avoid this problem (screen misalignment), without taking our magician to service.
Battery problem:
Changed the motherboard???Do you mean the hardware buttons?
Well, my magician works fine expect the sreen, so I haven't got any batt problem. But I will ask it too.
Cheers
Hardware Issue
Pretty sure this IS a hardware issue. Happened on my MDA Compact and got progressively worse.
No amount of hard resets, software configuration and ROM upgrades fixed it.
Came back from HTC good as new.
I have heard that using screen protectors causes this as it is touching the screen all the time.
I no longer use a screen protector so I'll let you know next year if the problem has come back again!
I've been on a quest to find a rom where the wifi works. Every wm6 rom I've used, wifi shows the APs, it connects then disconnects soon after and the AP says unavailable, then it'll work again for a sec then disconnect. I read somewhere that a rom based on build 318 would work and someone gave the XDAr6 rom as a suggestion. Same thing. works fine in every WM5 rom, just none in WM6. Anyone have an idea why? Maybe I'm missing a step to get it working or something?
Hello. Install Battery Status, (I have version 1.04.203.beta4) and it has several tabs, one of which has a checkbox that disables the proxy if WiFi is enabled. I ran into this issue too when i first started playing with new ROMs, and was very frustrated until I found this nifty app, and best of all, it works with all the ROMS I've used. Enjoy, hope it helps.
I don't know why this fixed my Wi-Fi, but it did. I just got this phone a few days ago and I was having trouble since yesterday getting the WLAN to enable. I would click it in Comm Manager and nothing would happen. Something I did broke it.
Of course it still won't connect and says "Unavailable" whenever I try to connect to anything that was just a second ago "Available", but at least it's back to the way it was when I got it.
I just did a soft reset and only ran into this once
Try this when you get a chance...
Go into your registry and change the following settings
HKLM\Comm\TNETWLN1\Params
HTCPreloadStatus = 1
HTCPreloadWifi = 1
This solved my issue I had with Wifi after I reflashed my device a couple times to various WM6 ROMs.
For some reason the HTCPreloadStatus never sticks and always converts back to zero. But I was reading a thread and found this solution and it said to do both reg edits. The fix did work for me so I didn't question it.
Mine says "Available", then I enter the network key, and it says "Connecting" and then changes to "Unavailable". It has done this since I got the phone. Today I unlocked it all and upgraded to the latest T-Mobile ROM, and it still does this. I guess I'll keep going and upgrade to a WM6 ROM, but I'm afraid it still won't work then.
I have the same problem, but I can't find where is this registry. What is this, a file that I have to change or I open it from somewhere else ?
Hi to all, I'm new to this forum and to Smartphone devices and I just got an HTC Fuze this week and I still cant get the Wifi to work trough a wep encripted router, I already tried with 3 diffrerent routers and still get an odd "incorrect key" message everytime I try (Im sure the key is correct because I connect my laptop there) and I already discarded a hardware issue (but you are the expert) because I disabled one of these routers wep encription and leaved it unprotected, therefore I could get a connection.
I already searched for an upgrade or something inside the Htc site and windows update and nothing..
Can anyone of you guys help me out? maybe point me in the right direction? or at least give me some advice?
I searched the threads in this forum and didnt find any problem like mine ,so I started this one.
Thanks in advance
Edit:
Question-- If the problem its software related, could it be possible to be fixed by flashing it with a custom ROM ?
If the answer is yes, what Rom its recomended for a smarthphone newbie (a noobproof ROM lets say), because my phone is very importanto to my work..
IdeAS? suggestions?
2nd Edit:
Plz someone at least tell me if my problem can be solved by installing a custom rom =S... or say you dont know I feel ignorated =(
Hello everyone, im new here also im new user of this big machine -Tytn II
From begining my jurney with it i notices that My wifi dont work, on settings i see option to run WIFI, but when i try Start it on commmgr its trying but its go back to off mode.
I tryied put upgrade on my 6.1 WM but its still the same, later i tryied use some registry tweaks but the same.
Ive serched whole internet for solution of it, PLEASE help me.. im loosing my hope ;/
Hope that i poste it on good place.
Sorry for mess, cant wait for answers!
Regards ADAM
to ensure, see your wifi's power save mode. go to comm manager, press settings at bottom right and choose wifi. under power save tab try avoid adjusting to best battery. see if it solves your problem. if not u might having a faulty wifi kaiser. im using 6.5 so i might slightly different than yours. hope this help good luck
adamekkp said:
Hello everyone, im new here also im new user of this big machine -Tytn II
From begining my jurney with it i notices that My wifi dont work, on settings i see option to run WIFI, but when i try Start it on commmgr its trying but its go back to off mode.
I tryied put upgrade on my 6.1 WM but its still the same, later i tryied use some registry tweaks but the same.
Ive serched whole internet for solution of it, PLEASE help me.. im loosing my hope ;/
Hope that i poste it on good place.
Sorry for mess, cant wait for answers!
Regards ADAM
Click to expand...
Click to collapse
Install an official HTC ROM. Then disable power save in wifi settings. Turn wifi on and try scanning for networks.
Try changing Radio version as well. I recommend 1.65 or higher
Ok, ive been changing power mode before. after playing with registry i cant go to advanced options of wifi.. only white screen.
Can i have download url? and in shortlist what to do step by step. Beocuse i dont want to mess it again ;/
BUMP
also got problems with batteries, gone sleep with 50% and after 7 hours, i heard alarm and phone fall down. - new soft can fix it ? or its just battery?
adamekkp said:
BUMP
also got problems with batteries, gone sleep with 50% and after 7 hours, i heard alarm and phone fall down. - new soft can fix it ? or its just battery?
Click to expand...
Click to collapse
The problem is that Kaiser uses 3G which uses lots of energy. In WM 6.5 there's option in Comm Manager to turn off 3G (I can't find anything similar in WM 6.1). The internet connection will be slower, but the battery performance will slightly increase.
help me guys, i cant run setup when i use D-pad.
I want to instal android to check wifi etc.
can i have Yours solution ;/
ive instaled android hero from sdcard. but wifi still not working, the same with bt, when on WM bt was working, dunno maybe wifi is hardware problem ;/
Have you checked the rear panel of the phone where the antenna is?
check the pins they could be bent of broken off
Just a thought
They'r looking good