Hey all,
Im wondering if theres anyone else on the forum that has 3 as there provider in australia and uses there push email service?
First of all is it reliable? and also..i actually tried installing it last night but when i fill out the pages to connect my work email it says it cant connect and everything is filled out properly.
If theres anyone else here that has tried this and has feedback that would be great!
Hi JayT,
These are the setting I'm using-
1.
On the handset, tap the Start button.
2.
Tap on Messaging.
3.
Tap on Setup E-mail.
4.
Enter your Three Email address in the E-mail address field.
5.
Enter the messaging PIN in the Password field.
6.
Ensure Try to get e-mail settings automatically from the internet is unchecked and tap on Next.
7.
Select Internet e-mail in Your e-mail provider
8.
Tap on Next.
9.
Enter your name in the Your name field.
10.
Enter your 3 Emailin the Account Display name field.
11.
Tap on Next.
12.
Enter mail.three.net.au in the Incoming mail server field.
13.
Select IMAP in Account type.
14.
Tap on Next.
15.
Enter your Three Email address in the User Name field.
16.
Enter the messaging PIN in the Password field.
17.
Click Finish.
On another note, I dont use push email, I schedule a send/receive every 15 minutes.
I do know it does work with Se7en and other such push providers but would prefer this to be done natively, not with an unreliable 3rd party software. I'm using wm6.5 by Da_G.
I've also been looking into ImapPusherService( http://blownfuze.org/files/ImapPusherService_0.6.zip ) but I cant get this to work with 3 mail.
Related
So after trying what seems like an endless number of radios, I'm unable to send emails from my phone using Gmail. Before flashing Hyperdragon III onto my phone, I was able to send/receive email no problem. Now I'm only able to receive, can't send email at all - says Unable to send message(s) - error synchronizing.
If someone could point me in the right direction, that would be awesome. This is starting to get frustrating.
start, settings, connections, manage existing, proxy settings, un-check this network uses a proxy server to connect to the internet
Checked that and the option to use a proxy is already disabled. Any other ideas? Definitely appreciate the suggestion tho.
PS. I also have the cabs to enable/disable the cingular/att proxy and neither makes a difference. Before changing the ROM, emails would send regardless of which setting I used. Hope this helps.
Dbagjones said:
Checked that and the option to use a proxy is already disabled. Any other ideas? Definitely appreciate the suggestion tho.
PS. I also have the cabs to enable/disable the cingular/att proxy and neither makes a difference. Before changing the ROM, emails would send regardless of which setting I used. Hope this helps.
Click to expand...
Click to collapse
Edit Account setup, then keep hitting mext until you get to the outgoing server settings and after "smtp.gmail.com" add ":587" to the end.
Worked immediately for me. It has to do with the new server authentication that wm6.1 or something requires.
Hope that fixes your problem! let me know if I need to be more specific, I'm at school and I gotta run.
Tried that and no dice. Does seem to be a WM6.1 issue though from what I've been reading.
maybe you should flash different HyderDragon...as there are two new versions came out. Or maybe try to flash the radio...Do you know what radio version you were using before flashed to HDIII?
Don't think it's the radio at this point. I've tried most of them in an attempt to fix the problem, but the 6.0-6.1 upgrade seems to be the culprit.
Dbagjones said:
Don't think it's the radio at this point. I've tried most of them in an attempt to fix the problem, but the 6.0-6.1 upgrade seems to be the culprit.
Click to expand...
Click to collapse
it prolly is, i mean since its release theres been all sorts of bugs reported ( as well as with HPD III, hence why i wont flash it ) but imo what u should do is start over..
re-flash, get ur new radio and take it from there
Jstar
try running the remove hidden proxy cab and then run the restore hidden proxy cab. i had this problem with gmail before and i think thats how i fixed it. it has nothing to do with the radio your using. just go to at&ts site and look up the connection settings and make sure everything makes sense...
If that doesn't work.
You could always try this.
I seriously doubt this is a radio related issue
http://mail.google.com/support/bin/answer.py?hl=en&answer=78886
Google said:
To configure IMAP for your Windows Mobile 6 device, just follow these steps:
Enable IMAP in your Gmail settings.
Open the Start menu and select Programs > Messaging > New E-mail Account.
Enter your Gmail address (including '@gmail.com') in the E-mail Address field*. Google Apps users, enter your full address in the format '[email protected]_domain.com'*.
* Windows Mobile 6.1 users: Enter an unintelligible email address (such as '[email protected]') at this step. This will bypass the automatic configuration for POP access.
Uncheck the box that asks to get settings automatically from the Internet and select Next.
Select Internet e-mail as your email provider in the drop-down menu.
Enter your name as you want it to appear in sent emails.
Enter a descriptive name for the email account and select Next.
Enter 'imap.gmail.com' in the Incoming Mail Server field.
Select IMAP4 as the Account type from the drop-down menu and select Next.
Enter your full email address (including '@gmail.com' or '@your_domain.com') and password.
Select Next.
Enter 'smtp.gmail.com' in the Outgoing (SMTP) Mail Server field.
Make sure that the Outgoing server requires authentication box is checked.
Select the Advanced Server Settings link.
Make sure that the Require SSL box is checked for both incoming and outgoing emails.
Select The Internet as the network connection from the drop-down menu.
Select Done and then Next.
Select how often you want your phone to send/receive emails from the drop-down menu.
For more download options, select the Review all download settings link.
Select Finish.
Check our recommended client settings, and adjust your client's settings as needed.
Click to expand...
Click to collapse
Checked that already, too. I'm not exactly a total noob I've had all my stuff working perfectly until upgrading to WM 6.1. The Hyperdragon rom was after the initial upgrade from 6-6.1. Email sending (receiving is fine) through my Gmail accounts just doesn't seem to work now. I suppose I can go back to stock, but... *shudder*
Hi All,
i have very badly problem with my XDA atom
I have O2 XDA Atom Version 5.
i want to connect my mobile on emails with the server of Gmail,
i have done all the things but i cant access
i m using WIFI connectivity
see below what i tried
1. New Account = ****@gmail.com
2. User Information=Your Name:**** / User Name:****@gmail.com / Pass:* Check on Save Password
3. Account Information: Account Type: POP3 / Name: Gmail
4. Incoming Mail: pop.gmai.com:995 / Outgoing mail: smtp.gmail.com:465 / Domail: Blank
Options
5. Connection: The Internet (but i have wifi connection what i do i cant understand there )
6. Require SSL Connection check
7. Outgoing mail requires autherication check
when i dont this all thing after pree the button send and receive the erorr comes " Unable To Connect with incoming server kindly check the correct server name and then send and receive '
pleaseeeee help me how can i run this pleaseeeeeeeeeeeeeeeee
Can't you let the phone get the settings automatically?
Would save you having to set up anything except how often the phone checks for emails etc.
Can't you let the phone get the settings automatically? > no i cant get the automatic setting
i don't understand why error showing incorrect server name
Farhan Jakwani said:
4. Incoming Mail: pop.gmai.com:995 / Outgoing mail: smtp.gmail.com:465 / Domail: Blank
Options
Click to expand...
Click to collapse
is the gmai just a typo? If not, try gmail.com
If yes, try to change the Connection to: "My Work Network" (or something similar)
best wishes and greetings from Germany
I have done all the things with mobile but no reply with incoming I think there some problem with port
I have used the gmail IMAP push found on this forum over wifi, it tends to fall over when the connection is lost but it does work and seems easy enough to configure. Just remember to allow IMAP access to your Gmail account.
The problem could be due to you not setting the email settings properly. Let me guide you how to do it.
But before you begin, go to you gmail settings >> Forwarding and POP/IMAP >> Enable POP for ALL MAIL
The following steps will be done on your phone:
1. Go to Start >> Messaging >> New E-Mail Account
2. Enter in your email address ([email protected])
3. Uncheck the option to receive e-mail settings automatically
4. Tap 'Next'
5. Type in whatever name you want .
6. Account name display can be whatever you wish
7. Tap 'Next'
8. Incoming mail server: pop.gmail.com:995
9. Account type: POP3
10. Tap 'Next'
11. The Username is the username that you use to login into Gmail and same for the password.
12. Check 'Save password'
13.Tap 'Next'
14. Outgoing SMTP server is smtp.gmail.com:465
15. Check 'outgoing server requires authenication'
16. Tap on 'Advanced Server Settings'
17. under Advanced Server Settings, check both SSL boxes adn network connection is set to 'The Internet'
18. Tap 'Next'
19. Select the delay between each sync and click on finish.
*Leave Domain blank*
There you go, that should make it work.
i've succesfully set up a hotmail account with my phone. but when i try to set up another one w/ my windows live it doesn't work. I go to the email set up screen, type up my email and password, press next, and the next screen says: to complete setup and dl email press next, i do..but it just opens my opera into the website..help pls! i have a fuze using RRE 5.8
So i used this hack to setup my gmail, hotmail an windjammercable mail in activesync so i could get push notifications for all my mail in one central app. Here is the problem, when i set the update schedule to push in offpeek time it causes my phone to continously do a data sync every 3 seconds non stop! Is there any setting that will get this working correctly?
Windjammercable mail uses google servers for their mail distribution.
If i set peak to push, an off peek to manuel, then changed peak to start at 8am an off peek to start at say 7am would that fix my problems? Or does peak an off peak require 12hrs gap between the two?
By: Brain82 at androidforums
This is a bit of a hack.
From the forums I read while trying to resolve this problem I noticed it worked for some people and didn't work for others. I my experience with software, I've learnt that software is not really erratic. There's always a pattern.
After trying all sorts of combinations, I came up with a process which has worked for me 3 times. You can all try it out and let me know if it works for you.
The process involves pretending to setup a hotmail account using ActiveSync (which will fail) then changing the settings to that of a gmail account. I know it sounds bizarre but it worked for me 3 times. The steps are below.
Pretending to setup a hotmail account
1. Go to the Launcher screen
2. Tap on "Email" icon
3. Press Menu
4. Add account
5. Enter full Email address: [email protected] or [email protected]
6. Enter password
7. Tap Manual Setup
8. Choose Microsoft Exchange ActiveSync
9. Domain\Username: your full email address (example: [email protected] or [email protected]). DO NOT USE "\" in front of the email address. You are not in any Exchange server domain.
10. Your password is already filled in from Step 6, ignore it
11. Server: m.hotmail.com
12. Use Secure connection (SSL) - Yes
13. Accept all SSL Certificates - Yes
14. Tap Next
You should see a checking server settings message ... mine took around 3 seconds.
Account options window
Email Checking Frequency - Automatic (Push) [<- that is the whole reason you wanted this, right?]
Amount to sync - your choice
rest of the four option - totally your choice
Tap Next
Choose account color - your choice
Tap Next
Account Name: Hotmail or WLM (or whatever you want)
Tap Next
At this point you will get the error message "Failed to create the account. Please try again later."
This is expected as a result of a bug with the HTC mail app. Now, moving on to setup the actual email account we're going through all this for.
Setting up actual Gmail Account
Tap "Ok" and tap the "Back" button twice.
Change the email address to your gmail/googlemail address.
Change the server address to m.google.com, leave to domain blank and
Change the username to your full email address.
Of course you need to change the password as well.
Also make sure SSL is checked.
Hit the "Next" button twice and then enter and "Account Name" if you wish. Finally tap "Finish Setup".
DONE! Hopefully your account should be ready to go!
Give it a try and let me know how it goes.
Click to expand...
Click to collapse
So I'm coming from a Samsung Fascinate, and so far I love this phone. However, the email app bugs the hell out of me. I have set up my Yahoo and Hotmail to sync through push. The emails sometimes do not come through for hours after they are received though. Additionally, deleting emails from my Fascinate used to delete them from the inbox on the server as well, so when I check through a browser, they will be gone. Now, this doesn't happen. A copy remains on the server, and I cannot find a setting ANYWHERE to disable that. Does anyone else notice this or have a fix?
Thanks
Just downloaded the respective Hotmail and Yahoo apps and they push immediately and correctly. Now I am trying to delete the email accounts from the stock email app, and it errors out. I tried removing them from accounts under settings and it says I have to completely wipe the phone as the accounts are being used by an app. What. The. Hell.
I think I have it figured out - it's in the setup of the email account and the server settings.
To set up a screenname / email address:
Main menu
Applications
Email
Menu
Accounts
Click add account
Select Others, not AOL
Enter email address and password
Here's the important part - choose the manual setup, not next. This will take you to incoming server settings. It should fill the settings automatically - IMAP / [email address]/ imap.aol.com / 143 / None
Hit next.
This is the outgoing server settings - again, auto filled - smtp.aol.com / 587 / None
Hit next. Then you customize the sync settings, name the account, choose your display name, and then hit Done. In Email, you can tailor signature settings, etc.
The key is the manual setup and having incoming and outgoing settings right - this fixes the trash syncing, allows folders to be displayed, etc.
Hope this helps