Okay, so here was I trying to do the app to sd and I was doing it using Terminal because my laptop does not give me permision to partition..I was at the last step which was basically to do the partition...I got some sort of mistake and the notification bar asked to format the sd, which I was forced to.....then I started getting a message that my sd card is damaged...so I took my sd card out turned off my phone and now my phone does not leave the g1 screen I tried taking out the battery and nothing...I have the latest radio and I did the Nandroid back up but that is pretty much all to waste since I formatted my sd
Help!!
DSBP1 said:
Okay, so here was I trying to do the app to sd and I was doing it using Terminal because my laptop does not give me permision to partition..I was at the last step which was basically to do the partition...I got some sort of mistake and the notification bar asked to format the sd, which I was forced to.....then I started getting a message that my sd card is damaged...so I took my sd card out turned off my phone and now my phone does not leave the g1 screen I tried taking out the battery and nothing...I have the latest radio and I did the Nandroid back up but that is pretty much all to waste since I formatted my sd
Help!!
Click to expand...
Click to collapse
You can boot the G1 while holding the camera button and press back to go into fastboot mode and restore your data or you can hold home+power and do a wipe... and properly format your sd and try again.
the problem is that when I do fastboot there is nothing in the sd because I originally formatt it...my sdcard is blank and I cannot mount it because I cannot get into the g1..
I think my only solution is by a push through adb..
Can you hold home while powering on to get into the bootloader?
If you can, go into the console (or use adb shell). From there, you should be able to delete the symlinks that point to the SD.
I assume it's not booting because you symlinked parts of the internal flash to SD card, but sd card doesn't exist.... but I've never actually tried apps on SD, so I have no idea .
wow..it is getting really strange...I just took off the battery and the G1 screen stayed on....aaaaaaaaaaaaaaahhhhhhh....this is weird..*
DSBP1 said:
wow..it is getting really strange...I just took off the battery and the G1 screen stayed on....aaaaaaaaaaaaaaahhhhhhh....this is weird..*
Click to expand...
Click to collapse
The screen holds colors after it's powered off, it's normal. It fades away slowly.
DSBP1 said:
wow..it is getting really strange...I just took off the battery and the G1 screen stayed on....aaaaaaaaaaaaaaahhhhhhh....this is weird..*
Click to expand...
Click to collapse
lol did you unplug the A/C if not then thats why. If you have a card reader just move the update.zip and if you don't boot into recovery and do a wipe without the SD plugged in. Then put it back or format the sdcard and next time save the backup to your pc before.
how can I push an update.zip through adb shell?? thats my only hope...or how can I restore through spl?? I am able to get through fastboot...and I did a wipe and that did not help...since I can't do no update.zip..or anything..
samysam05 said:
lol did you unplug the A/C if not then thats why. If you have a card reader just move the update.zip and if you don't boot into recovery and do a wipe without the SD plugged in. Then put it back or format the sdcard and next time save the backup to your pc before.
Click to expand...
Click to collapse
I have a back up on my pc...
I just cannot put anything into my sd.....and I don't have a card reader..
DSBP1 said:
the problem is that when I do fastboot there is nothing in the sd because I originally formatt it...my sdcard is blank and I cannot mount it because I cannot get into the g1..
I think my only solution is by a push through adb..
Click to expand...
Click to collapse
Fastboot does not require a sdcard. Just flash a working boot.img, system.img, and userdata.img thats stored on your computer.
if u go into the recovery menu (home+power)
and do a wipe (alt+w)
it will erase the symlinks and restore you to the original rom without the symlinks to ur sd card but to the internal flash...
^^^what do I do after that....I need to use ADB to push it?? and if I do a fastboot how do I push the system file??? by adb??
Can you explain why you can't fastboot the backup to your phone?
okay, when I go to fastboot...I press back to fastboot and then the action button...and then what??
Minker17 said:
Can you explain why you can't fastboot the backup to your phone?
Click to expand...
Click to collapse
Apparently its cuz he never read the instructions.... people please help yourselves before you beg for help from others
^^NO!!
and nevermind..I solved the problem...I was having a major problem with my usb reading my phone and my micro card...I had to install the files for Microsd...which was a hassle to find it...so that I was finally able to flash the update.zip...Fastboot was not working....I kept on getting an error message..but thank God I finally got my phone to work...
This only took about 3-4 hours to figure..word to the wise..don't mess with your sd card unless you are sure you know what you are doing...
DSBP1 said:
This only took about 3-4 hours to figure..word to the wise..don't mess with your sd card unless you are sure you know what you are doing...
Click to expand...
Click to collapse
I think that applies to everything...
driving a car
playing with fire
flying a plane
...
Yeah im pretty sure thats a condensed version of the disclaimer in the rooting thread... ive spent MUCH more than 4 hrs fixing stuff ive messed up on this thing... not to mention the other g1 i rooted/modded for the girlfriend, roommate, friends...
^^^I know :-(
But it sucks...I was suppose to be in bed 5 hours ago...now I have to be up in 3 hours to be ready to go to school..:-(
and tomorrow...I'ma try to partition my card again..
thanks for the help guys...nite!
Related
Hello,
I know my issue was discussed here a lot but I tried everything I read but it didn't work.
Here is my story:
I bought G1 and unlocked it. I downloaded DREAIMG.nbh, format to fat32, turned off, pressed the camera button, turned on (usb cable was pluged it, oops), pressed the "end" button, install started - BUT! didn't succeed.
I repeat this more then 20 times. but nothing change.
I get message: "no image found" thatn red-green-blue-white screen.
"drea100 pvt 32b ruunbh
hboot-0.95.0000
cpld-4
radio-1.22.12.29
sep 2 2008"
after 1 sec white line appear in the middle with "serial0"
IF I plug in the usb while I press the camera button etc, the serial0 doesn't appear.
I also tried different SD card but still get the same error.
I don't have SD card reader so I use my old Nokia 6120 with usb cable to format the SD card.
Please if some one can help me...
this happened to me b4..u might have a bad download of the DREAIMG.NBH..download it form somewhere else
hope this helps
it worked 4 me
Did you put DREAIMG.nbh back on your SD card after formatting? Formatting erases whatever you have on your SD card and it sounds like thats what you did since it can't find the image file.
acanz said:
Did you put DREAIMG.nbh back on your SD card after formatting? Formatting erases whatever you have on your SD card and it sounds like thats what you did since it can't find the image file.
Click to expand...
Click to collapse
You must make sure that it is EXACTLY like this DREAMING.nbh. Not dreaming.nbh or Dreaming.nbh.
g1junky said:
this happened to me b4..u might have a bad download of the DREAIMG.NBH..download it form somewhere else
hope this helps
it worked 4 me
Click to expand...
Click to collapse
I think that I already downloaded from 3 different servers. If you have any recommended one I don't mind to check again
acanz said:
Did you put DREAIMG.nbh back on your SD card after formatting? Formatting erases whatever you have on your SD card and it sounds like thats what you did since it can't find the image file.
Click to expand...
Click to collapse
sure, if that was the problem I was embarrassed
serialtoon said:
You must make sure that it is EXACTLY like this DREAMING.nbh. Not dreaming.nbh or Dreaming.nbh.
Click to expand...
Click to collapse
As far as I read it suppose to be DREAIMG.nbh, no?
Some one else wrote here: "put DREAIMG.nbh back on your" ...
How ever, I tried to rename it as you said and still - doesn't work.
erezson said:
sure, if that was the problem I was embarrassed
Click to expand...
Click to collapse
Hahaha I would be too, but sometimes people just forget or don't even know little things like that and it can screw everything up. I've done stuff when I'm way too exhausted and should be sleeping and think I have a giant problem when its really that I overlooked something tiny like that.
erezson said:
As far as I read it suppose to be DREAIMG.nbh, no?
Some one else wrote here: "put DREAIMG.nbh back on your" ...
How ever, I tried to rename it as you said and still - doesn't work.
Click to expand...
Click to collapse
It is DREAIMG.nbh, definitely not DREAMING.nbh.
anyone has idea of solution ? plz plz plz
can you read the file using usb mount? sometimes it could be a card problem.
I did use other card and the same...
When I connect the G1 to my PC (using usb cable) nothing happen on the PC, win xp or ubuntu. But when I connect the G1 before turning it on, when I suppose to get the message "serial0" - I don't. When I disconnect the cable then I get the message.
I hope this will assist you to assist me
Thanks
you can't afford a 15 dollar card reader? doing this kind of stuff to your phone, you should be knowledgable enough to know you're going to need gear.
are you extracting the file from within the folder and placing it in the root of your sdcard?
I have same problem, need to return the phone and can't seem to get DREAIMG.nbh to work, I've done it before on same phone, for whatever reason it just doesn't see the file on sd card. I've used the same file I used before, formatted SD, etc... Oh and went back to original SPL as well.
acanz said:
It is DREAIMG.nbh, definitely not DREAMING.nbh.
Click to expand...
Click to collapse
OOps my bad, you sir are correct! Thanks.
i think its the usb cable u r using
some cables can corrupt the file during a transfer
try it out with a card reader most def
u dont want to flash a corrupt dreaimg.nbh file and get screwed....
OK, I will go to buy SD reader and let you know.
btw, I read some stuff about md5, what is it (serial of nbh?)? and how I check it?
Thanks
I bought SD reader and I am happy to announce that I am the owner of G1 (root) RC33
Thanks everybody
hi everyone,
i have a g1 that was given to me a while back already rooted
recently it gave me problems and i had to restore it.....
after doing the restore it wouldnt boot up so i started playing with it....
i erased the sd card (by mistake)
and now the phone doesnt get passed the "tmobile g1" screen someone please help
thanks in advanced
download another rom and flash it, make sure you have the required partitions ie; Fat32, EXT4, LinuxSwap
can you still get into recover mode? power on the phone by pressing and holding the Home + Power button.
Let me know what you see.
civickrazy78 said:
hi everyone,
i have a g1 that was given to me a while back already rooted
recently it gave me problems and i had to restore it.....
after doing the restore it wouldnt boot up so i started playing with it....
i erased the sd card (by mistake)
and now the phone doesnt get passed the "tmobile g1" screen someone please help
thanks in advanced
Click to expand...
Click to collapse
Trying holding home after restarting - into recovery
Select Partition Card and follow the clicks.
Load a Rom onto the card using the MS Toggle
Flash a Zip from card
this might get better replies in the QA section.
Can I run this on Sapphire? Whens the next release date?
he3 said:
Trying holding home after restarting - into recovery
Select Partition Card and follow the clicks.
Load a Rom onto the card using the MS Toggle
Flash a Zip from card
this might get better replies in the QA section.
Can I run this on Sapphire? Whens the next release date?
Click to expand...
Click to collapse
well, if it was a "while back" they probably don't have MS toggle ( mass storage, i.e mount sd over usb )
@OP
just get the rom onto your sdcard, power off phone, remove sdcard, put in adaptor , then in to your pc's card reader.
you will also want to upgrade recovery
RA1.7.0 is probably your best bet
link in my sig
Firerat said:
well, if it was a "while back" they probably don't have MS toggle ( mass storage, i.e mount sd over usb )
@OP
just get the rom onto your sdcard, power off phone, remove sdcard, put in adaptor , then in to your pc's card reader.
you will also want to upgrade recovery
RA1.7.0 is probably your best bet
link in my sig
Click to expand...
Click to collapse
are you sure RA 1.7.0 is the best in this situation? i remember having the recovery dissapear issue with it in the begining. although firerat is great and knowledgable.
Firerat said:
@OP
just get the rom onto your sdcard, power off phone, remove sdcard, put in adaptor , then in to your pc's card reader.
Click to expand...
Click to collapse
Totally true FR.
Dont worry OP, Im bilingual in British :
To get the rom onto your sd card:
Power off phone, remove sd card and use an adapter to get a rom on.
This method can be used if your recovery does not support MS.
Bzerk1 said:
are you sure RA 1.7.0 is the best in this situation? i remember having the recovery dissapear issue with it in the begining. although firerat is great and knowledgable.
Click to expand...
Click to collapse
thats because you flashed it from cm5, nothing wrong with the recovery
issue is CM5+'s kernels
Since they can't boot to ROM the instructions on Amon_RA's page are perfect.
clockwork recovery's page does not give any detail on how to flash, infact it recommends you do it via ROM Manger, which can get you stuck for a bit
PS you can use Amon_RA's instructions to install Clockwork
I'm warming to clockwork, but it has some things I just don't like
No console ((((
No flash/action confirmation, ( trackball is not great, you sometimes slip up or down when pressing ... grrrr )
So, there I was happily running Sense 3 Pr4 and Dream Kernel 2.0.3 with the MR2.5, decide to reboot my phone before bed to let it charge at a decent rate, starts just booting over and over. Hits lockscreen, freeze, reboot. Annoyed I figure, ok, I'll go flash the kernel again, flashes pretty instantly, odd, but whatever, reboot... loops. So fine, I'll do a full recovery.... no recovery files... ok, I'll wipe data etc and install my rom zip off the card... [bad]. WTF? put the sd card in my laptop, all the folders are on my sd card, but noooo files, and the couple files that are left are 0kb, what the hell happened to all my stuff? any advice or help? Pretty please? got a recovery software, gonna see what I can salvage, but what happened here?!
i dont think that i have heard of this before. not with phones at least. sounds like ur card got formatted or something. u should be able to reformat the card and install all the roms, file system, etc u need from ur computer. it might be worth it to try to put some stuff on the card from ur computer to see if it will take. maybe a bad card ??? im not sure there is a complete reformat type of recovery out there. good luck.
Yep, I swear it has something to do with the modded USB Mount apk. I have heard of this happening a few times now.
I try to keep a backup of my SD on my lappy.
Sent from my ADR6400L using XDA App
Never really thought of this happening, definitely gonna be backing up from now on. Got back some pics, but lost camera videos of the kids, unrecoverable.
Hi All,
I am using ICS Asianic V2.0 by Darkmantra. And I was playing with my phone last night (Build prop to be specific). I set VM heap to 12 and rebooted and after that It would not boot up. It cannot go beyond HTC logo with white background.
I can boot to recovery, I'd tried a few things that i think made it worse. I re-installed build prop tweak from SD card but did not work. I did a factory reset and a few others which i can no longger recall.... So I decided to just go right ahead and re-flash the ROM from SD card but I was not able to. I was getting an error: "e:can't mount /sdcard"
Is there still hope for my phone? any help will be appreciated...
Thanks in advance.
bugzy0509 said:
Hi All,
I am using ICS Asianic V2.0 by Darkmantra. And I was playing with my phone last night (Build prop to be specific). I set VM heap to 12 and rebooted and after that It would not boot up. It cannot go beyond HTC logo with white background.
I can boot to recovery, I'd tried a few things that i think made it worse. I re-installed build prop tweak from SD card but did not work. I did a factory reset and a few others which i can no longger recall.... So I decided to just go right ahead and re-flash the ROM from SD card but I was not able to. I was getting an error: "e:can't mount /sdcard"
Is there still hope for my phone? any help will be appreciated...
Thanks in advance.
Click to expand...
Click to collapse
Sometimes happens, try turning phone off, take out sd card, put back in and try again
The problem is that the phone thinks the SD Card is unmounted. (Sorry to restate the obvious)
Physically removing the card and putting it back in might work. But if you do it with the power off the phone might not realize anything is different.
If you have 4EXT Recovery, you can try to remount it from within the recovery. First try to mount it. Then unmount. Then mount it again. See if that works.
If neither of those work try to mount it with ADB.
And if all else fails, copy the files to your computer using a card reader, format the card, recopy everything back to the card, and start over. I had a situation like that once where this was what finally got the card to remount. Something got glitched on the card so it wasn't being recognized.
Skipjacks said:
The problem is that the phone thinks the SD Card is unmounted. (Sorry to restate the obvious)
Physically removing the card and putting it back in might work. But if you do it with the power off the phone might not realize anything is different.
If you have 4EXT Recovery, you can try to remount it from within the recovery. First try to mount it. Then unmount. Then mount it again. See if that works.
If neither of those work try to mount it with ADB.
And if all else fails, copy the files to your computer using a card reader, format the card, recopy everything back to the card, and start over. I had a situation like that once where this was what finally got the card to remount. Something got glitched on the card so it wasn't being recognized.
Click to expand...
Click to collapse
Thanks Skipjacks!!
I do not know what solved it but here is what I did....
- formatted the SD card (have no important data in it anyway)
- copied ROM to SD card
- set phone to Recovery mode without SD card
- Hot plug SD card
- tried to update from SD card and it was able to recognize it...!
- i was able to install my ROM..
thank you! I appreciate the help!
hiya i wonder if any1 can help!
basically my phone was telling me my sd card had been removed (no big deal i thought, this seems to happen to my phone from time to time since running this ROM (bruce2728's cm10)).
i can usually either remove the sd card and put back in, or the same with the battery to get it working again. but no matter how many times i try it wont work. also when using this ROM (and before this problem) every time that i try to enter storage from the settings menu, settings force closes.
so completely out of ideas i tried doing a wipe and trying again. now u see im fairly new to all this and that seems to get touted as a way to fix some things, so i thought id give it a go.
but now my phone wont get past the white with green HTC logo, its been sat like that for about an hour! and in recovery it just says that it cannot mount sd card!!
i feel im firmly up **** creek. is there any way to fix this? perhaps a way to flash a ROM without using sd card to a phone that wont boot up?
i feel i might need to flash a new bootanimation.img as i changed this from the default in the ROM, could i also do this without an sd card or a phone that wont get past HTC logo?
i hope there is someone out there that can help!
thank you in advance,
Max
I would install ARHD from Mike1986 it seems to help resettle the device running a sense ROM. Make sure you follow his instructions using ext4 and super wipe
Sent from my HTC Sensation using xda app-developers app
if you are S-ON enable smartflash first from 4ext and then flash the rom
rzr86 said:
if you are S-ON enable smartflash first from 4ext and then flash the rom
Click to expand...
Click to collapse
yeah thats what i always do but because i cant access my sd card i cant flash the ROM which is saved on it. it just keeps saying cant mount /sdcard
Max792 said:
yeah thats what i always do but because i cant access my sd card i cant flash the ROM which is saved on it. it just keeps saying cant mount /sdcard
Click to expand...
Click to collapse
The recovery won't pick up the SD card? That is very odd. Do you have any others around to test with?
tapped out from my sexy sensation XE
heavy_metal_man said:
The recovery won't pick up the SD card? That is very odd. Do you have any others around to test with?
tapped out from my sexy sensation XE
Click to expand...
Click to collapse
I'm assuming you've tried pulling the battery, unseating the sd card, reseating it, putting battery back, and going to recovery right?
If that doesn't work I'd suggest trying to read the sd in card in a PC... is it readable there?
All in all you can get to recovery so you arent that bad off, just need to figure out what's up with the SD.
Yes I can view my SD card on both my PC and my tablet :/ but when I boot into 4ext it says problem mounting SD card, may take longer without. Then when 4ext loads I can't manually mount SD or browse for zip file. You think this is more likely a hardware issue with my sensation?
Sent from my Transformer Prime TF201 using XDA Premium HD app
Max792 said:
Yes I can view my SD card on both my PC and my tablet :/ but when I boot into 4ext it says problem mounting SD card, may take longer without. Then when 4ext loads I can't manually mount SD or browse for zip file. You think this is more likely a hardware issue with my sensation?
Sent from my Transformer Prime TF201 using XDA Premium HD app
Click to expand...
Click to collapse
On your PC, copy all your files off your SD card, format your SD card (makes sure the filesystem is set to fat32), and then just put 1 file on it, a ROM, and see if the recovery detects it. If that doesn't work then you can always try using a different SD card.
android1234567 said:
On your PC, copy all your files off your SD card, format your SD card (makes sure the filesystem is set to fat32), and then just put 1 file on it, a ROM, and see if the recovery detects it. If that doesn't work then you can always try using a different SD card.
Click to expand...
Click to collapse
Okay thanks I will try this, but I think its the SD card tray that has gone because I just squeezed it and it was able to mount, however only for a second then 4ext rebooted
Sent from my Transformer Prime TF201 using XDA Premium HD app
Max792 said:
i can usually either remove the sd card and put back in, or the same with the battery to get it working again. but no matter how many times i try it wont work. also when using this ROM (and before this problem) every time that i try to enter storage from the settings menu, settings force closes.
Click to expand...
Click to collapse
This isn't part of your SD card problem. This was a ROM bug that was fixed in the Jan 9th update. Any use of the storage menu from the settings on the late December to Jan 6th builds caused a FC.
So if you are using one of those builds, don't factor in th esettings FC in your diagnosis of the problem.
SD card ejections were also an issue on the Dec 21 - Jan 3rd builds if I recall correctly. I had one day where the SD card would just unmount and refused to remount. It was a problem experienced by only a handful of people and seemed to be very limited. Though if you can't mount in recovery than that's probably not the issue.
Also, you said you could press the SD card into the slot and it mounted for a second...
2 things on that note.
First, your SD card might be the problem. Maybe the contacts are worn out. Take a lcose look at it and make sure it looks okay. No corrosion, etc...
Second, the metal housing around the SD card...that can be mashed in slightly to put more pressure on the card. Take the card out and press the middle of that housing in. It could create enough force to hold the card in more securely. Be VERY careful with this option though.
Also, did you make sure another SD card got the same problem? If another card works, then your card is just f'ed.
Skipjacks said:
This isn't part of your SD card problem. This was a ROM bug that was fixed in the Jan 9th update. Any use of the storage menu from the settings on the late December to Jan 6th builds caused a FC.
So if you are using one of those builds, don't factor in th esettings FC in your diagnosis of the problem.
SD card ejections were also an issue on the Dec 21 - Jan 3rd builds if I recall correctly. I had one day where the SD card would just unmount and refused to remount. It was a problem experienced by only a handful of people and seemed to be very limited. Though if you can't mount in recovery than that's probably not the issue.
Also, you said you could press the SD card into the slot and it mounted for a second...
2 things on that note.
First, your SD card might be the problem. Maybe the contacts are worn out. Take a lcose look at it and make sure it looks okay. No corrosion, etc...
Second, the metal housing around the SD card...that can be mashed in slightly to put more pressure on the card. Take the card out and press the middle of that housing in. It could create enough force to hold the card in more securely. Be VERY careful with this option though.
Also, did you make sure another SD card got the same problem? If another card works, then your card is just f'ed.
Click to expand...
Click to collapse
cheers mate helped a lot. i did actually see that kind of talk in the thread but kind of passed over it because it hadnt affected me... yet!
if it was a ROM bug i feel im totally f'ed as i cant flash a new version due to the inaccessible sd card.
yeah ive been doing this exact mashing you speak of lol, hopefully it will work or i am completely out of ideas :\
cheers everybody for your help tho guys really appreciate it
Max792 said:
cheers mate helped a lot. i did actually see that kind of talk in the thread but kind of passed over it because it hadnt affected me... yet!
if it was a ROM bug i feel im totally f'ed as i cant flash a new version due to the inaccessible sd card.
yeah ive been doing this exact mashing you speak of lol, hopefully it will work or i am completely out of ideas :\
cheers everybody for your help tho guys really appreciate it
Click to expand...
Click to collapse
Find the exact rom you were on and take the boot IMG out of it. Wipe your data and cache and then boot to fastboot. With the boot.IMG
In your adb folder do fastboot boot boot.IMG and see if it boots into the rom.
Tapped out from my sexy nexus 7