Hi,
I have a German MDA Vario 3 (German - T-Mobile OS and German QWERTZ ÄÖÜ) and I need to flash it with an US/UK OS.
I assume after unlocking the CID I can flash the device with either the Generic HTC Rom or the AT&T Tilt Rom.
So far so good, but what happens to the German Keyboard Layout, this isn't the same as The Tilt or Genereic HTC Layout.
Any Ideas?
Thanks
Mike
hello L2C
pls have a try this method:
in the path [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
change the "Curlang" data to 1031(Dec) or 407(Hex)
soft-reset~
if it doesnt work,pls tell me
i make a cab in case you havent a tool to edit registry
transfer the cab to kaiser and run it
softreset
Thanks for the swift help.
I am just hesitant to flash my device right now, I am unsure to use Soft SPL or Hard SPL.
Cheers
Mike
oh mike,you are welcome
i suggest u to flash the rom with hspl v1,in my opinion that's much safer than sspl.so far i've seen some flash rom unsuccessfully with sspl
u can follow pof's thread to get the hspl
if u flash AT&T Tilt Rom i think ur output would be not the same with ur german keyboard,because the LCID isnt the german one
then u could use the cab to fix it !
hope it can help u, i install the cab and my TyTNII's layout switches to QWERTZ
cheers~
Hi woohyuksheng,
thanks for your help, appreciate it!
One question, the cab you included in your post switches your QWERTY to QWERTZ, right?
But does it also switch QWERTZ to QWERTY (so back an fourth every time you install it?)
Cherrs
Mike
if yours is QWERTY originally,you patch the cab on your kaiser and after soft-reset that your keyboard output will become QWERTZ.
and of course u can remove the cab and give it a soft-reset,yours will be back to QWERTY.
in one word, this cab can only make your keyboard layout become QWERTZ,uninstall it,will become the original one.
regards~
Sheng
My keyboard is originally QWERTZ and I need a patch to make it QWERTY.
Sure that the one you posted will help me?
Cheers
Mike
oh in this case you want it QWERTY,that should be no problem~
try this cab
regards
Sheng
Hi Sheng,
thanks alot, I will try this later today.
I will post feedback
Mike
OK ,wait for your good message~
and one more choice u can take~
if u want it QWERTY like the Tilt, patch with this cab
the Tilt's QWERTY differs with the ordinary QWERTY
the symbol "@" and the "!" r upside down,maybe u can find it comparing the Tilt's pics with others~
regards
Sheng
Hi Sheng
I got one more question for you, maybe to make myself a bit clearer.
I got the German T-Mobile Vario 3 (German Windows Mobile 6os and therefore a German Keyboard Layout (QWERTZ).
I want to give this device to someone in the US, he has an AT&T Sim card.
First question, what ROM works better for him:
AT&T Tilt Rom
or
HTC Original Rom
In any case, whatever ROM I flash the device with he will need a Keyboard patch applied.
Any answers ?
Thanks for your help
Mike
ok,i think u should flash the ATT rom for him.maybe ATT rom would fit him better,there r many ATT softwares in the rom.
that u dont need to install any keyboard patch,it would be QWERTY layout~
but the type on your keyboard wouldnt match the layout,if you want the keys match the layout,u can fix it with my cab in floor 2, up to u.
Regards
Sheng
You are the Man! Thanks
So to be clear:
Hard CID Unlock, then flash the device with ATT Rom and then apply this cab:
Tilt QWERTYsheng's keyboard patch.cab
Correct?
Cheers
Mike
L2C said:
You are the Man! Thanks
So to be clear:
Hard CID Unlock, then flash the device with ATT Rom and then apply this cab:
Tilt QWERTYsheng's keyboard patch.cab
Correct?
Cheers
Mike
Click to expand...
Click to collapse
No thanks,after u flash the ATT ROM u need not to apply "Tilt QWERTYsheng's keyboard patch.cab" , and your device's layout is like a Tilt, but when u press the hard key "z"(between "t"and"u")on your keyboard it puts out "y",'cause your QWERTZ hard keyboard and Tile's keyboard are not the same,right?
and if you want to fix it ,u should apply the cab which i posted in floor 2,then while u press the hard key "z" (between "t"and"u"),your device puts out "z"
REGARDS
sheng
Hi Sheng
I flashed the AT&T Rom sucessfully, now in order to have the right keys assigned to the (hard-) keyboard I need to install: QWERTYsheng's keyboard patch.cab correct?
Cheers
Mike
oh ,i think u should install sheng's keyboard patch.cab, the first cab i attach in the floor 2
What do you mean by "Floor 2". Just maybe to be sure, can you attached it once more to your reply?
Thanks Sheng
Mike
hehe it means #2
here it is!
enjoys
Sheng
Hi Sheng
I installed the .cab from a microSD card installed into the device.
I turned it off completly and restarted it again, but the .cab doesnt seem to have an effect.
You said I need to reset it, how do I do this?
Mike
Mike:
I make a new cab that should be work ~ soo sorry about that i uploaded a wrong cab
pls try the new one
sheng
Hi cooks.ive been having problems with email on any wm6.1 rom i try.reverting back to reconstructed t-mobile rom my email as if by magic starts to work again.
i have tried the t-mobile email fix cab and that didnt help.also a microsoft update that is meant to fix the problem but dosnt install due to the build version of the roms.
i really like the new home screen of hyperdragon, youtube and i also like threaded messaging.
what i was wondering is if its possible to have the wm6.0 t-mobile reconstruction rom with the features above cooked in a rom?or if i can install after reverting back to 6.0.
thanks for any light you can shed
Hi,
would it possible to port Dude's Cupcake v1.3 RC1 to our HTC Magic?
Is there someone who can do this for us?
For more information; look at this thread:
http://forum.xda-developers.com/showthread.php?t=507151
Thx
Kindly Regards
Puky70
I'll try it.
First of all, I'll extract the zip and change boot.img with the rogers boot...
And try if boots correctly...
----edit----
updating.....
fingers crossed.....!!!!
Just wondering how it went?
I tested it..installation aborts
Thanks for the reply, thought that might be the case as it had gone quiet. Maybe time for me to learn how to port ROMS!?
I would be very happy if someone can rewrite Dude's Cupcake v1.3 RC1. I would love to use it on my HTC Magic!
Greets from Germany!
After weekend tests I've ported successfully this rom, but...
Bugs:
First and important but: Wifi does not start...
I've changed wifi.ko file, but wifi doesn't work...
Maybe somebody can point me in the right way...
If anyone is just interested in the look of the screen shot in post 1 (ie. Hero)...
I thought i'd give tehseano & MOONSSPOON's hero theme (from the dream forum) a shot on the Haykuro ADP1.5H port for Magic as I had noticed that it had been reported to work on the Dream version of his ROM and it Worked!!!
hey Guys!
Apparently I am running WM6.5 but not the new Manilla...
See my screen at: http://uploads.kapone.ca/jef/home.jpg
if anyone can tell me what do I need to do to get the good Manilla 2.5 or even 2.6 if its available for my CMDA - Telus - TP2
Here is what I did,
1. I installed RhodiumW CDMA Worldphone HardSPL
2. I installed MightyROM Midnight Blue
I read in many post that I need to flash rom if I wanna be on manilla 2.5...
Do I need to run again the Hard SPL ? or I just need to install a new CDMA rom ?
Anyone have one to suggest me that will work with my phone ?
Again! Thanks! I am sure my post will help a lot of Canadian like me stuck in CDAM box
regards to all of you helping us out there!
ignite48 said:
hey Guys!
Apparently I am running WM6.5 but not the new Manilla...
See my screen at: http://uploads.kapone.ca/jef/home.jpg
if anyone can tell me what do I need to do to get the good Manilla 2.5 or even 2.6 if its available for my CMDA - Telus - TP2
Here is what I did,
1. I installed RhodiumW CDMA Worldphone HardSPL
2. I installed MightyROM Midnight Blue
I read in many post that I need to flash rom if I wanna be on manilla 2.5...
Do I need to run again the Hard SPL ? or I just need to install a new CDMA rom ?
Anyone have one to suggest me that will work with my phone ?
Again! Thanks! I am sure my post will help a lot of Canadian like me stuck in CDAM box
regards to all of you helping us out there!
Click to expand...
Click to collapse
that does look like 2.5 to me and to have energy rom running, you did flash your phone
I really hope someone comes out with a radio rom that allows us to unlock the HSPA 1900 access (since the chip can do it according to its specs) with the new network launching today\tomorrow.
How is the rom? any things lacking that telus had installed? an problems with telus? is it crashier or faster than the stock telus rom?
MightyROM is 6.5 but Manila 2.1. You need to find a 6.5 ROM that includes Manila 2.5, one of the NRG ROMs has 2.5, I believe the LEO ROM. Mighty Mike is on Telus so I have to assume it works fine on Telus. He's also rumored to be coming out with a 2.5 ROM in the future, but for now all he's got is 2.1
Yes, you're definitely using the new version of Manilla 2.1 and not 2.5. I use NRGZ's Leo rom and I love it. It's winmo 6.5 and manilla 2.5.
Be aware that 2.5 is BETA and will have bugs. the roms with manilla 2.1 are much more stable. Don't get me wrong, I LOVE the Leo rom, there's just a couple of little things that aren't quite right (such as having to use winmo messaging if you want to MMS).
Kevin
Do I need a CDMA ROM
Thanks for everything guys. this is exactly what I was looking for as an answer.
Do I need a CDMA ROM to fit on it ? or any rom found on the Rhodium blog can be use ?
if you have a link regarding the rom you think I should be using please post it.
Again thanks for helping me on that. I can feel i'm getting addicted to flashing my tp2....
cheers guys!
I haven't checked the Rhodium Rom section here, so I could be wrong, but it used to be only GSM versions. To be safe, if you want 6.5 and 2.5, use the rom found at this link.
http://forum.ppcgeeks.com/showthread.php?t=86489
Also, once you've flashed it, check out the FAQ here.
http://forum.ppcgeeks.com/showpost.php?p=1280306&postcount=18
By the way, he has 2 different builds. Version 21864 is more stable and based on winmo 6.5. Version 23081 is based on an early beta of winmo 6.5.1 so it's not as stable and has a few more bugs. Not to say it's not worth a good flash though.
Good luck, and enjoy.
Kevin
many thanks!
thats awesome.
this community rocks.
regards,
if you dont like all the blue there is another leo (2.5) rom for you. while at ppcgeeks in the cdma tp2 upgrades. check out the juicy rom. hes also on telus
woot woot
this works perfectly.
i got my phone up and running. this is awesome.
I hope my post will help others!
best regards to all of you guys
dear friends
I have wm6.5 but it contains the normal wm6.5 dialer
I want to install Tachi dialer, I tried to install it, but it have a big buttons i think versions I got is vga compatable, so plz if any one have a cab file for a compatable version with wizard send me a link for it.
thanks in advance
search harder next time
http://forum.xda-developers.com/showthread.php?t=523856&highlight=dialer+skin