Database Info

[3.03 WWE][G7]HTCMAG_ROM_WWE_O3 by Cotulla

HTCMAG_ROM_WWE_O3
My first ROM for HTC Magician.
Release date: 14.04.2009 18:24 GMT+3
Alternate name: 3.03 WWE.
Features:
*128 and 64 ram support
*USB RNDIS support.
*SDHighCapacity support (up to 8GB)
*SDIO expansion no longer supported.
*Error Reporting turned off.
*RDP programm added
*WModem is obsolete. Excluded.
*Something else
*Of course all features from HTCMAG_ROM_WWE_O2 - read info about it also!
Installation:
*YOU MUST HAVE 1.12 RADIO! IF NOT, INSTALL IT FIRST!!!
*Download archive
*Extract files from it
*Enter bootloader mode on device (Press POWER + CAMERA + RESET, you will see Serial/USB at top and 1.0X at bottom)
*Connect via USB to PC
*Run Update.exe
*Follow instructions in Update program.
*At the end you should see at device screen: "100% Upgrade OS Image Complete".
*After flashing press reset.
*Don't touch device, wait while "welcome screen" appear.
*Press screen, do calibration and start using device.
NOTE: This is ONLY ONE right instruction how to flash your device with my rom.
otherwise your device can no longer boots, also you can get brick. be sure, before doing anything wrong!
Uninstallation
*Enter bootloader mode on device (Press POWER + CAMERA + RESET, you will see Serial/USB at top and 1.0X at bottom)
*Connect via USB to PC
*Install ORIGINAL 1.12 or 1.13 ROM. No big storage etc. Install original one!!
[YOU *MUST* REPLACE ROMUpgradeUt.exe TO MaUpgradeUt_noID.exe]
*Now you can flash any other old custom roms.
NOTE: This is ONLY ONE right instruction how to uninstall my rom, otherwise you can have problems with new rom.
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You can read more and download rom from my website.
You are flashing your device at your own risk.
I've tried all my ROMs on my own device and didn't find any problem.
I take no responsibility for any harm or damage to yourself, your device, computer or anything else.
Something works, something doesn't. Something is not supposed to work.
Something is supposed to work, but doesn't. Something should't work, but works.
Something should work, but doesn't;
Something should work from your point of view, but not from mine.
Something is not supposed to work, that's why it doesn't work.
By downloading and using this files, you agree with this statements.
This is private project, don't ask any details about development, also don't ask about future releases, I won't answer. Sorry.
Please don't send me Private Messages about this project, write in this thread instead.
Best regards,
-Cotulla

Thanks you upper king of magician roms. Looks very good.
Do you ever sleep?
[reserved]

Thanks~~~downloading

Gee.. 3rd version in 2 month for wimo 6.1, what a great job, thank you sir, you are trully magician...

good job man!

Simply one word : Superb

Cotulla said:
HTCMAG_ROM_WWE_O3
My first ROM for HTC Magician.
Release date: 14.04.2009 18:24 GMT+3
Alternate name: 3.03 WWE.
Features:
...
*SDIO expansion no longer supported.
...
Click to expand...
Click to collapse
So.. we're not going to be able to use SD wifi / wlan cards anymore???

Big thanks to Cotulla, it is so cool.
But sorry of one demand,can make a ROM use CHS language of this release, please?
many chinese user are looking forward to......

Hi Cotulla,
One little problem... my storage card is now named as "Mounted Volume". Since I have used sprite backup and restore from your 02 rom to 03 without the need for reinstalling applications, but the path name is new, all my programs are not working...
Is there a fast fix to the matter? (renaming "Mounted Volume" back to "Storage Card").
Many thanks in advanced.
Philip

Thanx Cotulla Great Work

philiplam said:
Hi Cotulla,
One little problem... my storage card is now named as "Mounted Volume". Since I have used sprite backup and restore from your 02 rom to 03 without the need for reinstalling applications, but the path name is new, all my programs are not working...
Is there a fast fix to the matter? (renaming "Mounted Volume" back to "Storage Card").
Many thanks in advanced.
Philip
Click to expand...
Click to collapse
Dear Cotulla,
Sorry for bothering, but even more strange this is: Before my sprite restore, this is named "Storage Card"... the name gets changed only after the restore...
Help...
Philip

philiplam said:
Hi Cotulla,
One little problem... my storage card is now named as "Mounted Volume". Since I have used sprite backup and restore from your 02 rom to 03 without the need for reinstalling applications, but the path name is new, all my programs are not working...
Is there a fast fix to the matter? (renaming "Mounted Volume" back to "Storage Card").
Many thanks in advanced.
Philip
Click to expand...
Click to collapse
Comes me again,ha ha
Just have a look at here:
HKLM\System\StorageManager\Profiles\SDMMC
"Folder"="Storage Card"
And then reboot.
If Cotulla have changed the mount point of SDCard,you can click another subitem under "Profiles" and find which Folder's name is "Mounted Volume",change it to "Storage Card".
I have developed an optimization tool for Cotulla's WM6 and it works well,but it is a software in Simplified Chinese language,do you want to try?

If #7 is true, it would be a huuugee mess...
If by sdio you really talk about that kind of cards used to get the old magician wifi then...please explain why?!
It worked just fine....

xiaojin1985 said:
Comes me again,ha ha
Just have a look at here:
HKLM\System\StorageManager\Profiles\SDMMC
"Folder"="Storage Card"
And then reboot.
If Cotulla have changed the mount point of SDCard,you can click another subitem under "Profiles" and find which Folder's name is "Mounted Volume",change it to "Storage Card".
I have developed an optimization tool for Cotulla's WM6 and it works well,but it is a software in Simplified Chinese language,do you want to try?
Click to expand...
Click to collapse
Dear XiaoJin,
Thanks for your info. Worked like a charm.
Another question for you today: my o2 won't be able to recognize by Windows XP (Unknown USB Device) after my sprite restore, so I can't sync. Is there another key I need to delete from the device?
I would love to test drive my optimization software, and also if you need any translating work I could do that for you too. I have done that previously for the Chinese famous software "infinite today". Though I doubt if you need any as I think your English is as good (bad) as mine anyways.
Regards,
Philip

Dear Cotulla,
Sorry for bothering, but even more strange this is: Before my sprite restore, this is named "Storage Card"... the name gets changed only after the restore...
Click to expand...
Click to collapse
YOU MUST NOT RESTORE BACKUPS FROM OTHER ROMs!!!!
You can restore only PIM data(Contacts, Calendar, Messagess).
If you restore backup from old rom, you get a mixed sh#t - a half of old rom and a half of new rom, this can cause a lot of bugs and etc.
If people continue ignore this rule, I will include protection engine in future ROMs.

why would u remove sdio support?
how else can we get wifi on the magicin than through sdio wifi card?
pls confirm if this new rom doesnt support wifi cards.
thanks
does this version use less memory space?

Radio version
Hi everyone,
i'm using CHT Rom (OS 1.11.06 / ExtROM 1.11.902 / Radio 1.11 / traditional chinese) and the radio version is 1.11, while i have to have 1.12 version in order to install this WM6.1 ROM.
How can i upgrade my radio version to 1.12?
and for the uninstallation problem, the read me said that (Install ORIGINAL 1.12 or 1.13 ROM. No big storage etc. Install original one!!) but the CHT ROM is 1.11, so if i install this WM6.1 ROM, i won't be able to install other ROM? Thx
Dear Cotulla,
Will you release the CHT version of this ROM? Thx

Hi man
thanks for your great job and for your time keep on the good work
on testing....

Bluetooth in Setting\System folder
I just finished with 03 ROM installtion but I can't sync and it seem like the bluetooth icon in the setting\system (normally there, this is the place where you normally check the outgoing/incoming port 4 &5) is not there anymore or I missing something? Those are the 2 issues I have. Anybody having these problems?
My phone is S110 and I was able to run fine with 02 ROM.
Back to checking the new ROM...again many thanks Cotulla!!!
Updated: I got the (USB cable) sync problem fixed by uninstall and reinstall the activesync 4.5. But still can't get the bluetooth sync to work so I can't sync via bluetooth as an option so I can browse the web inside my house. My bluetooth headset works OK.. just the bluetooth icon normally in the setting\system folder is not there anymore :-( so I can't setup sync via bluetooth. BTW the SDHC work great on my 4GB Kingston SDHC
Mike8010

no SDIO Wlan cards? So we have a choice between sdhc and sdio am I wrong?

[Q] ACE Hack Kit Question

Attempting to root my AT&T Inspire 4G I just bought with the ACE Hack Kit... during the process I get the following errors:
Code:
Patching and backing up partition 17...
Error opening backup file.
and
Code:
INFOchecking main version...
FAILED (remote: 43 main version check fail)
rebooting...
Radio downgrade complete - starting next process - please be patient...
major abra-cadabra going on, please be patient.....
************* Downgrade failed *************
** Either:
** Goldcard failed
** USB connections are not working 100%
************* Downgrade failed *************
Obviously my radio is still S-ON. Any ideas as to how to correct or get through these errors?

jmelcher said:
Attempting to root my AT&T Inspire 4G I just bought with the ACE Hack Kit... during the process I get the following errors:
Code:
Patching and backing up partition 17...
Error opening backup file.
and
Code:
INFOchecking main version...
FAILED (remote: 43 main version check fail)
rebooting...
Radio downgrade complete - starting next process - please be patient...
major abra-cadabra going on, please be patient.....
************* Downgrade failed *************
** Either:
** Goldcard failed
** USB connections are not working 100%
************* Downgrade failed *************
Obviously my radio is still S-ON. Any ideas as to how to correct or get through these errors?
Click to expand...
Click to collapse
Is your antivirus disabled?

Joshp406 said:
Is your antivirus disabled?
Click to expand...
Click to collapse
That woulda been my first questions too. If you think you've disabled it, try running the hack kit on a different computer. All else fails, hop into attn1's IRC for assistance (link in the hack kit thread)

Attempted on a PC (WIN7) and MacBook Pro... I get the same results. Antivirus is disabled.

jmelcher said:
Attempting to root my AT&T Inspire 4G I just bought with the ACE Hack Kit... during the process I get the following errors:
Code:
Patching and backing up partition 17...
Error opening backup file.
and
Code:
INFOchecking main version...
FAILED (remote: 43 main version check fail)
rebooting...
Radio downgrade complete - starting next process - please be patient...
major abra-cadabra going on, please be patient.....
************* Downgrade failed *************
** Either:
** Goldcard failed
** USB connections are not working 100%
************* Downgrade failed *************
Obviously my radio is still S-ON. Any ideas as to how to correct or get through these errors?
Click to expand...
Click to collapse
Also any software that deals with synching should be uninstalled
Sent from my Inspire 4G using xda premium

jmelcher said:
Attempted on a PC (WIN7) and MacBook Pro... I get the same results. Antivirus is disabled.
Click to expand...
Click to collapse
Try a different SD card.

have tried 2 different sdcards, same issue. have been working with attn1 on IRC, hopefully i'll make some progress soon.
thanks all.

Sounds like USB communication error. If your sure that its none of the programs mentioned in the manual that can cause a problem, then you need to update pc drivers or get a different cable.
Sent from my Inspire 4G using XDA Premium.
Radio: 26.13.04.19
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Gizmoe said:
Sounds like USB communication error. If your sure that its none of the programs mentioned in the manual that can cause a problem, then you need to update pc drivers or get a different cable.
Sent from my Inspire 4G using XDA Premium.
Radio: 26.13.04.19
Click to expand...
Click to collapse
Jeeze Gizmoe, at least put that in you sig so I can turn it off like everyone else's obnoxious sig.
The "can't backup partition 7" error message means that it cannot write to the SDCard. It's either bad or the hardware that controls the SDCard is faulty.
Do you have any other SDCard issues?

Hey my command prop just shows errors help plz
Sent from my PG86100 using xda premium

Gene Poole said:
Jeeze Gizmoe, at least put that in you sig so I can turn it off like everyone else's obnoxious sig.
The "can't backup partition 7" error message means that it cannot write to the SDCard. It's either bad or the hardware that controls the SDCard is faulty.
Do you have any other SDCard issues?
Click to expand...
Click to collapse
Yeah I use phone app so its not that big. Just looked at posts on pc though and it takes up a bit of screen real estate. Sorry, that can get obnoxious I'm sure.
Sent from my Inspire 4G using XDA Premium.
Radio: 26.13.04.19

thizzlemania91 said:
Hey my command prop just shows errors help plz
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
You're going to have to give us a little more information.

Tried 3 different USB cables, 3 different SD cards on both MAC and PC. Same results. The only thing I can think of is maybe the SD cards are to blame... are there any name-brand recommendations over generic?

dude - open your own thread, don't hijack mine.

thizzlemania91 said:
Hey my command prop just shows errors help plz
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Dude - open your own thread, don't hijack mine.

jmelcher said:
Tried 3 different USB cables, 3 different SD cards on both MAC and PC. Same results. The only thing I can think of is maybe the SD cards are to blame... are there any name-brand recommendations over generic?
Click to expand...
Click to collapse
As long as the SD card is class 4 or better you should be OK. Have you tried the IRC like it suggest when you run into issues?

jmelcher said:
Attempting to root my AT&T Inspire 4G I just bought with the ACE Hack Kit... during the process I get the following errors:
Code:
Patching and backing up partition 17...
Error opening backup file.
and
Code:
INFOchecking main version...
FAILED (remote: 43 main version check fail)
rebooting...
Radio downgrade complete - starting next process - please be patient...
major abra-cadabra going on, please be patient.....
************* Downgrade failed *************
** Either:
** Goldcard failed
** USB connections are not working 100%
************* Downgrade failed *************
Obviously my radio is still S-ON. Any ideas as to how to correct or get through these errors?
Click to expand...
Click to collapse
These errors (FAILED (remote: 43 main version check fail) in particular) are most definitely SDCard related, either because charge only mode is not the default (see the effen manual on how to set this) or because the SDCard has corruption generally because the user has removed the SDCard after a write without ejecting it properly with the OS that has mounted it. We don't run into this problem every day, but when we do, a user often has a habit of removing the SDCard improperly, and every SDCard he or she owns has been compromised. Reformatting FAT32 alone does not fix this, because being able to write to the SDcard is only half the battle - it must also function as a Goldcard.
Another cause of SDCard failure is partitioning and formatting FAT32 on a MAC with GUID partition tables. This won't work as a Goldcard.

attn1 said:
These errors (FAILED (remote: 43 main version check fail) in particular) are most definitely SDCard related, either because charge only mode is not the default (see the effen manual on how to set this) or because the SDCard has corruption generally because the user has removed the SDCard after a write without ejecting it properly with the OS that has mounted it. We don't run into this problem every day, but when we do, a user often has a habit of removing the SDCard improperly, and every SDCard he or she owns has been compromised. Reformatting FAT32 alone does not fix this, because being able to write to the SDcard is only half the battle - it must also function as a Goldcard.
Another cause of SDCard failure is partitioning and formatting FAT32 on a MAC with GUID partition tables. This won't work as a Goldcard.
Click to expand...
Click to collapse
attn1: I appreciate your help last week on the IRC. I was able to successfully root my phone last night after finding and stopping the Bonjour service. In previous attempts I had disabled everything I could disable, but somehow missed that one. The ACE Hack Kit ran perfectly and was rooted within about 5 minutes. I used the original SD card and USB cable I started with last week.
I am now running CoreDroid v8.1.
Thanks to you and others for the input and assistance.

Ace kit error
I'm having an issues when I run hack kit I get " Error: protocol fault (no status) any idea whats going on or how to fix?

NEED HELP HTC INSPIRE 4G ACE kit
I downloaded the ACE Hack Kit and i'm stuck on the htc screen. I've tried taking the battery out and bootloading i.e(wiping the cache, data, Dalvik, system, and i'm still getting the same screen. Nothing seems to work, i'm using ClockworkMod v5.0.2.0 GB 2.3.3 Sense 2.1. I've read some other forums on here and still can't get it to work.

Cabletech Android Dongle URZ0193 [TCC8925] aka Plute iSMRTV

As an introduction, I ended up with this stick with no markings on inside or outside of casing, didn't even know the vendor. The build that was on the device when I first got it didn't even have the Google Play Store. This lead me to a (somewhat lengthy) look into this model. After a lot of fiddling, trawling and eventually playing, I wanted to bundle up everything I can on this stick as what I do know about it is spread wide and thin.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OEM Vendor Plute on Alibaba - Sold as the "iSMRTV"
Official Page (Translated to from Polish to English)
User Manual (Scroll down for English section)
Specifications on website
Main chipset: Cortex-A5 Telechip TCC8925;
Processor: 1GHz; @ 800
RAM: 512MB DDR III
Memory: 4GB NAND Flash
External memory: Micro SD card or USB memory stick
System: Android 4.0 (Ice-cream Sandwitch)
Connectors and Ports
1 x USB Port
SD card slot: 1 x Micro SD (Up to 32GB)
1x Micro USB port (power)
Power
Plug HDMI port to connect the device to the TV
Firmware download - This is v1.1 and have yet to upgrade to this (link was only posted today) but a quick look at update.zip shows at least the Play Store apk in there. This update doesn't flash onto my stick for some reason. I'm chasing down the reseller and the vendor to find out more info and possibly source another update file.
Firmware Upgrade
Restore factory settings
Copy update.zip to a USB flash drive or MicroSD card
Plus in USB flash drive or MicroSD card into dongle
Go Settings > About Tablet > System Updates > Install System Update > From USB Storage (USB Flash drive) OR From SDCARD External Storage (MicroSD card)
Select Install Now
Wait for installation to finish and done!
How to Root (thanks to tatubias)
Download file from here
Unzip cx-01.zip
Connect the dongle to your PC via Micro-USB cable. Ignore USB malfunction warning, PC will detect device once the dongle has finished booting (can take a few minutes, took me a while to figure this one out)
When the installation driver screen appears, select advanced option to select the folder driver from the file that you have unzipped
When driver installation is complete go to the folder Root-Script
Run Root-Script.bat
In Root-Script.bat window
7a - Select option 1 and verify the connection if OK
7b - Select option 2 and check if your device can be rooted (with this script)
7c - If its ok select option 3 when finished the dongle will be rebooted
That's all I have for now. AFAIK there isn't a custom ROM available for this device as yet. Wouldn't mind getting into it myself.

Thanks
Work like a charm
Waiting for a custom ROM
Is it complicated to make a custom rom for this device ? How can I get source to start playing ?

Well here is the drama that was the other night. The firmware they have supplied doesn't flash, at least not onto my device. Tried it from a few different memory sticks and even from internal memory. Tried flashing the update.zip via ADB, no dice. Tried recovering it via ADB. I can get to the bootloader for fastboot, but for the life of me I can't get this firmware to flash.
The problem with the current firmware is that it doesn't allow you to log in with a Google account and therefore the Play Store doesn't work. Killing me. I don't know where to start as far as building firmware for this that I can flash either with the built in function or over ADB and I don't want to risk flashing the CX-01 custom firmware from the Pandawill forum in case I completely brick it.
Any help would be appreciated.

I manage to update mine but it's still 4.0.4
Before launching the upgrade in the about I got
Model Number : TCC8925_HDMI_DONGLE
Android Version 4.0.4
Baseband Version : Unknown
Kernel version : 3.0.8-tcc [email protected] #154 Mon Oct 8 10:53:30 CST 2012
Build number full_tcc8920st_emmc-userdebug 4.0.4 IMM76D eng.sunny.20121008.105834 test-keys
After upgrade
Model Number : ANDROID_HDMI_DONGLE
Android Version 4.0.4
Baseband Version : Unknown
Kernel version : 3.0.8-tcc [email protected] #364 Fri Nov 16 20:51:49 CST 2012
Build number Android-eng 4.0.4 IMM76D IMM76D eng.root.20121128.105154
So the new firmware seems to be newer but I can't see any news on this firmware
I also tried to change some stuff in the zip and sign it again but I didn't manage to update
BTW this is the Stick that I have
http://plute.en.alibaba.com/product...OOK_GOOGLE_PLAYSTORE_TWITTER_ANGRY_BIRDS.html
it's seems to be the real manufacterer of what you call cabletech

Internal nand is a aditional 4GB microSD card.
how to upload new firmware directly on the card? Can anyone give a link to the image of the card? I got her for good... How to create image this card? Sorry google translated...

astarte_corp said:
Internal nand is a aditional 4GB microSD card.
how to upload new firmware directly on the card? Can anyone give a link to the image of the card? I got her for good... How to create image this card? Sorry google translated...
Click to expand...
Click to collapse
Download it from here ftp://ftp.lechpol.pl/Products/Cabletech/frimware1.1/
copy to a micro sd card and launch the install from the setting about upgrade

Hi,
I also have such a stick from Cabletech. Thanks a lot for the update link, I'll try it. What kind of power supply are you using?

I installed the new firmware, it looks that it is very good, the experience is very smooth. There is however a drawback, the Play Store is not working, it seems that everything connected to a google account is not working (Play Store, login to youtube). I suspect that the necessary applications are not installed since I don't have the option to add a google account.
I'll try to install the Google Apps from CM9.

danr677 said:
I installed the new firmware, it looks that it is very good, the experience is very smooth. There is however a drawback, the Play Store is not working, it seems that everything connected to a google account is not working (Play Store, login to youtube). I suspect that the necessary applications are not installed since I don't have the option to add a google account.
I'll try to install the Google Apps from CM9.
Click to expand...
Click to collapse
Did you get the Google Play working? Did you try to restore factory settings?
Is the device working realy smoothly? It works not so well on stock
---------------------------
Edit
I upgraded device using the file. Just after update google services did notwork propertly, it was not possible e.g. to add gogle account or installing aplications from Google Play. I have restored factory settings and it started to work propertly. Device with new firmware works a little bit better...

!
another link please to download firmware....some mirror...... for actualy i need authentication with user and pass...thank you !

dantbt said:
another link please to download firmware....some mirror...... for actualy i need authentication with user and pass...thank you !
Click to expand...
Click to collapse
Possibly you might use this firmware (check if your hardware is the same):
http://tabletrepublic.com/forum/cx-01/cx-01-specs-info-tweaks-2516.html

Hello,
thanks for the great information provided. i was able to do this, that you provided us with and much more but i ran into some issues (issues triggered by myself) and now i have to fix the android image. therefore i have a few questions:
do you have an image (done with dd [linux] or [win32diskimager]) of the internal sd card?
do you have any idea how to boot the device in recovery
do you know a method of installing self-made update.zip's?
the dongle is very much the same with cx-01 but the only thing missing is the button which would allow us to boot the device into recovery mode and flash *.rom files.
DarkArmada said:
As an introduction, I ended up with this stick with no markings on inside or outside of casing, didn't even know the vendor. The build that was on the device when I first got it didn't even have the Google Play Store. This lead me to a (somewhat lengthy) look into this model. After a lot of fiddling, trawling and eventually playing, I wanted to bundle up everything I can on this stick as what I do know about it is spread wide and thin.
OEM Vendor Plute on Alibaba - Sold as the "iSMRTV"
Official Page (Translated to from Polish to English)
User Manual (Scroll down for English section)
Specifications on website
Main chipset: Cortex-A5 Telechip TCC8925;
Processor: 1GHz; @ 800
RAM: 512MB DDR III
Memory: 4GB NAND Flash
External memory: Micro SD card or USB memory stick
System: Android 4.0 (Ice-cream Sandwitch)
Connectors and Ports
1 x USB Port
SD card slot: 1 x Micro SD (Up to 32GB)
1x Micro USB port (power)
Power
Plug HDMI port to connect the device to the TV
Firmware download - This is v1.1 and have yet to upgrade to this (link was only posted today) but a quick look at update.zip shows at least the Play Store apk in there. This update doesn't flash onto my stick for some reason. I'm chasing down the reseller and the vendor to find out more info and possibly source another update file.
Firmware Upgrade
Restore factory settings
Copy update.zip to a USB flash drive or MicroSD card
Plus in USB flash drive or MicroSD card into dongle
Go Settings > About Tablet > System Updates > Install System Update > From USB Storage (USB Flash drive) OR From SDCARD External Storage (MicroSD card)
Select Install Now
Wait for installation to finish and done!
How to Root (thanks to tatubias)
Download file from here
Unzip cx-01.zip
Connect the dongle to your PC via Micro-USB cable. Ignore USB malfunction warning, PC will detect device once the dongle has finished booting (can take a few minutes, took me a while to figure this one out)
When the installation driver screen appears, select advanced option to select the folder driver from the file that you have unzipped
When driver installation is complete go to the folder Root-Script
Run Root-Script.bat
In Root-Script.bat window
7a - Select option 1 and verify the connection if OK
7b - Select option 2 and check if your device can be rooted (with this script)
7c - If its ok select option 3 when finished the dongle will be rebooted
That's all I have for now. AFAIK there isn't a custom ROM available for this device as yet. Wouldn't mind getting into it myself.
Click to expand...
Click to collapse

leonard.pitzu said:
Hello,
thanks for the great information provided. i was able to do this, that you provided us with and much more but i ran into some issues (issues triggered by myself) and now i have to fix the android image. therefore i have a few questions:
do you have an image (done with dd [linux] or [win32diskimager]) of the internal sd card?
do you have any idea how to boot the device in recovery
do you know a method of installing self-made update.zip's?
the dongle is very much the same with cx-01 but the only thing missing is the button which would allow us to boot the device into recovery mode and flash *.rom files.
Click to expand...
Click to collapse
Unfortunately I don't have anything. I ended up trying to flash a ROM I found online, bricked the stick. I can still access via ADB, but need an image to flash and I don't have that. Haven't even looked at the stick since then.
If anyone has an image that can be flashed via ADB, please let us know.

That sucks... i have a working stick but no stock image to share. If you need it i can make a full sd card image (with dd) and share it. This would bring your stick to the factory settings + version 04 of the modds that float around for the cx-01. I had no time to look at the schematics and fit the stick with a button so now this is the only solution availabke.

Firmware Update
I have contacted with the vendor and have received following URL for Calbletech URZ0193 firmware update:
www dot lechpol dot eu slash model slash urz0193 slash - sorry fort unconvenience, but I can't put external links directly. So try remove spaces from the URL and replace "slash" and "dot" words with the characters .
represented by them.
Try it, I just received the mail with the update URL few minutes ago and I do not have any experiences with that update file.
Best regards

Can someone give any mirrot to update 1.1 if im opening lechpol page i need login and pass

Jordandc said:
Can someone give any mirrot to update 1.1 if im opening lechpol page i need login and pass
Click to expand...
Click to collapse
You can download it directly from Cabletech website -->
cabletech.pl/pl/11145-cabletech-smart-tv-android-dongle---przystawka-do-telewizora-z-systemem-android-4-0
lechpol.eu/sites/default/files/produkty/1/1048/update.zip
No login needed...

Some one know where can I download the factory firmware? I upgrade to the new but the google market is not working and I dont want root this device because I lost guaranty.

Jordandc said:
Some one know where can I download the factory firmware? I upgrade to the new but the google market is not working and I dont want root this device because I lost guaranty.
Click to expand...
Click to collapse
I had the same problem. Just restore default settings...

powerkill said:
Thanks
Work like a charm
Waiting for a custom ROM
Is it complicated to make a custom rom for this device ? How can I get source to start playing ?
Click to expand...
Click to collapse
Good day Sir,
do you have another link cause its already been dead
i need this firmware please help.

[Q] How to get dynamic storage (/sdcard ->/data/media) on One S, "Insufficient Space"

[Q] How to get dynamic storage (/sdcard ->/data/media) on One S, "Insufficient Space"
Ohh, I'm getting so fed-up with seeing "Insufficient Space on Device" errors in the Play Store. What good is Android if I can't download any games or apps?!
I'm running CyanogenMod 12.1, latest nightlies. But the ROM thread isn't the right place to put this, because it's a device/partition-level issue.
I've got hboot 2.15 and S-OFF, and from what I've seen, hboot 2.16 brings with it the "dynamic /sdcard" feature that creates one big partition out of /data and uses part of it for a "virtual SD". What I have now seems to be a fixed /data size and a huge, almost completely unused /sdcard partition. I keep running into "Insufficient space on device" errors all the time, without even downloading new apps - just trying to update the apps I have. Nothing big, either - the biggest app I have is freakin' Candy Crush. It appears that I'm only given a 2GB /data partition, and 1.1GB of that is Dalvik-Cache, and 900MB of it is apps & data. Yeah, the dalvik-cache is bigger than the damn apps it's caching!
I'd be willing to wipe it all out again (sigh... SIGH) if I can get dynamic /data to work, perhaps by updating to hboot 2.16. I'd even go S-ON again if need be - the only reason I'd gone S-OFF is to try to get more stability out of the glitchy radio firmware constantly dropping the internet connection, but those problems still persist too...

Well, I dug really, really deep and discovered that hboot 2.16 is what brings the "dynamic /sdcard" to the One S. You can follow along with much more information in my replies here: http://forum.cyanogenmod.org/topic/113169-storage-space-running-out/#entry535206
The key is to install hboot 2.16 from this post: http://forum.xda-developers.com/showpost.php?p=39216236&postcount=274&nocache=1&z=674317537341266
I'm hoping - hoping and hoping* - that I can restore my TWRP backup into the new /data partition. To get it working, I had to use TWRP's "repair/change filesystem" on both /cache and the /data partitions (though strangely, /system was left intact and valid, apparently because the sector location didn't change). This means that all USB storage (/sdcard) and internal storage (/data) will be lost, so be sure to backup and transfer to your PC before updating to hboot 2.16! You also lose the ability to mount internal storage as USB (using USB Mass Storage mode), because /sdcard is now a virtual drive, no longer FAT formatted. In my opinion, this is a very worthwhile and acceptable tradeoff... because /data is now 12 GB!
* - edit: I'm full-on freakin' ecstatic right now.
"Internal storage - Total space: 12.06 GB -- Available: 7.63 GB"
And not a single thing was lost or changed. Booted right up as if I'd just switched the thing off and back on.

Hey FalconFour,
Thanks a lot for sharing your progress with us.
As you saw in my thread, I'm facing the same annoying storage issues like you (and a lot more people on the internet...).
I'll give your solution a shot during the next couple of days and report back as soon as I have some results.
My status quo: HTC ONE S / CM 12.1 / S-ON / HBoot 2.15
Do you have any advice for me before I start?

Urds said:
Hey FalconFour,
Thanks a lot for sharing your progress with us.
As you saw in my thread, I'm facing the same annoying storage issues like you (and a lot more people on the internet...).
I'll give your solution a shot during the next couple of days and report back as soon as I have some results.
My status quo: HTC ONE S / CM 12.1 / S-ON / HBoot 2.15
Do you have any advice for me before I start?
Click to expand...
Click to collapse
** Crap -- I just realized you said you're S-ON. See the bottom of the post for advice on that. **
1) Backup. I used TWRP 2.8.7.0.
2) Earlier versions of TWRP seem to have a bug in "Mount USB storage" function - on mine, it was horribly, unusably unreliable to actually present the "linux file gadget" USB device or whatever it was. 2.8.7.0 seems to fix that. It mounted reliably after the update, and I backed up all the files on the "internal SD" - including the backup I just made.
3) Grab hboot 2.16 and apply it per the fastboot commands in that thread.
4) For safety, I ran "fastboot oem erase_phone_storage" from the new 2.16 bootloader (fastboot mode).
5) Before rebooting, I reflashed TWRP 2.8.7.0 with "fastboot flash recovery" just in case it changed.
6) Reboot to TWRP recovery.
7) Under "Wipe", "Advanced", use "Repair/change filesystem", and I applied F2FS to /data and /cache, since at least /data will now be unformatted (or corrupt) due to the partition layout change. Since ext4 isn't designed for Flash storage and I'd like my phone to last as long as possible, I figure the bit (a few hundred MB) of "wasted" storage space on F2FS' logs is totally worth it, now that I have 12GB of storage available between /data and /sdcard combined.
8) Enable MTP mode in TWRP (under Mount) and transfer all my SD card contents back to the phone.
9) Now, I restored my backup - excluding /system and /boot. It warned me about the backup being made with ext4, but worked fine.
10) Now, the phone will boot as if nothing had happened -- but your /sdcard will not be accessible, due to the change in structure. You need a new kernel image that's compatible with hboot 2.16's partition layout. I did this by updating my ROM to the newest (9/1) snapshot of CM12.1 - here: http://forum.xda-developers.com/showpost.php?p=39216236&postcount=274&nocache=1&z=674317537341266 -- so I applied that zip, the newest GApps, and the SuperSU zip.
That's it! Just like it was yesterday, but with practically infinite room to move. :good:
Update -- for S-ON, I think you need to get S-OFF in order to modify "hboot". I'm not actually sure. If you get to step 4 and you do NOT see hboot 2.16 installed, you should grab Rumrunner and let it work its magic. It's a very condescending and often frustrating program at first, but it gets quite genuinely hilarious in its status messages as it runs. As long as your environment is clean (ADB driver matches the ADB version bundled inside rumrunner's executable, which you can check while it's running by examining the files in a hidden folder it creates when you run it), it'll work its magic and you'll become S-OFF. Backing up is a good idea before embarking on rumrunner, of course. Also -- I've used Moonshine before as well, and it seems like Rumrunner was created to fix a lot of program-logic bugs in Moonshine - does a much better job of recovering from unusual conditions that hang up Moonshine. Rumrunner > Moonshine. :victory:

Thank you very much for your summary. I really appreciate your work here!
At the beginning I was really excited after going through your posts... Now, after my first attempts, I'm back to reality ^^
At first I tried to flash the bootloader while staying S-ON. During the update process I received the following error: remote: 99 unknown fail.
I can't really define what causes the error but I thought it could be related to S-ON. That's why I decided to go for S-OFF.
After using rumrunner and moonshine (which both failed) I found out, that apparently I need to go back to a stock rom. Switching to S-OFF and having cyanogenmod installed seems to be not supported.
At this point, being tired and bugged, I stopped for a rest...

Urds said:
I can't really define what causes the error but I thought it could be related to S-ON. That's why I decided to go for S-OFF.
After using rumrunner and moonshine (which both failed) I found out, that apparently I need to go back to a stock rom. Switching to S-OFF and having cyanogenmod installed seems to be not supported.
At this point, being tired and bugged, I stopped for a rest...
Click to expand...
Click to collapse
Hah, yep, I can relate... it's a HUGE pain in the rear to find the right RUU to get this thing fully stock again. But I think I've mastered the process, and I'll pass that along here as well.
Even through all this, once you get it S-OFF'd and updated to hboot 2.16, you can restore TWRP (or your preferred recovery) and restore your ROM just as it was before - most likely. Performing "S-OFF" also allows recovery to flash the "boot" (kernel) partition, instead of needing to use "fastboot flash boot" separately from installing the ROM.
For my RUU, I believe I used a package called (*deep breath*... may need to remove spaces) RUU_Ville_U_JB_45_S_TMOUS_3.14.531.11_Radio_1.13.50.05.31_10.30.50.08L_release_309489_signed_ICS_2.exe - which contains every iota of data that the phone consists of - bootloader (it will S-On your phone again), radio firmware, kernel, system storage, partition layout, *everything*. So definitely back up your ROM and the resulting internal /sdcard contents before doing it.
When you run that, it'll pretty much do everything on autopilot, though you may want to launch it from Fastboot mode (Power+VolDown from powered-off state). I found that it only works reliably in a system with an older OS, though - I had trouble with Windows 8 and obviously Windows 10 as well, as they wouldn't detect the bootloader device. Windows 7 may be compatible, but I did it on a Server 2003 (Windows XP) system myself.
Then, you can Rumrunner it, then (may need to) unlock it again (HTC method), verify you're at hboot 2.16 (perform steps above if needed), restore your recovery, restore /sdcard, restore your ROM using MTP mode, and should be good to go!

FalconFour said:
(Instructions omitted)
Click to expand...
Click to collapse
Hey @FalconFour,
Just wanted to express my thanks for writing your OP. Earlier today I found it when I was looking for a way to increase my data partition. Thanks to you this was a totally effortless process. Thanks! :victory:

voidzero said:
Just wanted to express my thanks for writing your OP. Earlier today I found it when I was looking for a way to increase my data partition. Thanks to you this was a totally effortless process. Thanks! :victory:
Click to expand...
Click to collapse
Thanks @voidzero! It'd be awesome to gain some +rep for it :laugh::good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
update: Oh! I see you already did, LOL. Sorry! Well, for anyone else passing through these internet tubes, then! Crap, now I wish I could delete.

NuVision TM800A510L- General Info (Root, Recovery, Unbrick)

This thread intends to be a general thread for all things about the NuVision Tablet. The aim is to help other users of this tablet to be able to root their device, get a temporary recovery and to unbrick their device. I will add the guides for the following posts below in time. This would not have been possible without help from @andrei_kr.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Technical Specifications:
Display: 8-inch IPS HD capacitive touchscreen
Resolution: 1280 x 800
Operating System: Android 4.4 Kit Kat
Processor: Intel® Atom Processor
Memory: 1GB DDR
Storage: 16GB
Micro SD Card Slot: Yes, expandable up to 64GB
Camera - Rear: 2MP
Camera - Front: 2MP
Audio: 3.5mm stereo jack with microphone
Wireless: Wi-Fi 802.11 b/g/n
Bluetooth: Bluetooth 4.0
Battery Type: Rechargeable lithium-ion
Battery Life: 6+ hours; results will vary based on usage and settings
Port: Micro USB
Sensor(s): Accelerometer

Backup/Root/Recovery
DISCLAIMER:
Rooting your phone and using custom Recoveries and ROM's have risks and may result in bricking your device, and has nothing to do with Google or the device manufacturers. In case of any mishap I am not responsible if you brick/ruin your phone in any way.
Basic computer skills are required and minimal knowledge about the phone and phone utilities also.
Make sure that whatever you do, you are doing it at your own responsibility.
How to backup of your stock ROM, install CWM and Root your device.
Requirements
ADB/Fastboot Drivers
Intel Android USB Drivers
SDcard (8GB of higher)
Temp recovery script
SuperSU
Steps
Download and unpack IntelAndroid-FBRL-07-24-2015.7z
Power off tab.
Hold Vol+ and press Power on the tab 5-10 seconds
You can see logo about 10 sec and after that DROIDBOOT will load
Connect USB cable to PC
Run launch.bat from IntelAndroid-FBRL-07-24-2015 folder
Type ACCEPT and press Enter
Type 5 and ENTER (cwm.zip)
Type T3 and ENTER (or T4)
CWM will load after 10 sec.
Select backup to external sd card.
After the backup is complete, copy it to the PC to ensure it's safe.
Follow steps 1-10 again and go to install zip from sdcard or external and select the SuperSU zip file and flash it.
NOTE: DO NOT FLASH ANY ROMS WITH THIS RECOVERY IT IS ONLY TEMPORARY. I DID NOT TEST XPOSED SO BE CAREFUL.
Credits
@andrei_kr
@social-design-concepts
@vampirefo
@Chainfire

Unbrick your Tab!
To unbrick your device all you simply have to do is go back to the CWM and restore your backup that you created earlier. If you don't have one, here is a copy of a working backup ---> Google Drive. Credits to @andrei_kr, say thanks!

How to fix touch!
If you unbricked your tablet and your touch isn't working, there is no need to worry. @andrei_kr has provided a guide on how to fix that touchscreen. Credits to him.
NOTE: If your touch is working then do not try this, it will mess up your touch!!
You probably got this touchscreen issue by flashing a different kernel with incorrect drivers.
Now your configuration is likely to differ from the native. You can view the konifig in command prompt or in the terminal :
Code:
cat /proc/gt9xx_config
(only mtk) or using the gtp_tools apk (it is in the attached file below).
It starts with the byte sequence: 0x41 0x1C 0x02 0xC0 0x03
0x41 - 65 version
0x1C 0x02 - 540 horizontal resolution
0xC0 0x03 - 960 vertical resolution
Touch must somehow work to press the button, if there is support otg, then it's easier, you can connect a mouse.
1. Install the gtp_tools_v2.6_20140126_special.apk
2. Go to the option Firmware update. Click refresh, see IC Version: 913_1020 then touch GT913 firmware and 1020.
3. Go to the option Config Settings, press read, the data were considered. Under Normal Config we have:
65 version
540 horizontal resolution
960 vertical resolution
4. Click browse, select click browse to the native config.
5. Native configuration take from your device, in the same paragraph, press the save (saves the backup config file). Native configuration for Fly IQ446 in the attached file. Press send.
6. If nothing has changed, look at the version you have and native config. Then change the version of the file in the native config in your hex.
Example: 0x41 = 65 home, a stranger 0x49 = 73 => replace the 0x41 to 0x49.

Xposed does work
Make sure you're rooted and have a working backup.
Download and install Xposed but don't run yet.
Version name:
2.6.1
Release type:
Stable (low risk of bugs)
Download:
de.robv.android.xposed.installer_v32_de4f0d.apk (711.77 KB)
Number of downloads:
11,141,690 in total · 8,610 in the last 24 hours
MD5 checksum:
de4f0dc569f96dbcc5668d40fa76040b
Uploaded on:
Tuesday, May 20, 2014 - 21:59
Changes:
- Fixed a crash with some apps (Disa, Rdio)
- Some minor UI improvements
- A few translation updates
Now either use an android terminal emulator or ADB and run these commands
1. su
2. echo 148 > /data/data/de.robv.android.xposed.installer/conf/jit_reset_offset
3. chmod 664 /data/data/de.robv.android.xposed.installer/conf/jit_reset_offset
Now you can install the Xposed framework.

max0r4axor said:
Xposed does work
Make sure you're rooted and have a working backup.
Download and install Xposed but don't run yet.
Version name:
2.6.1
Release type:
Stable (low risk of bugs)
Download:
de.robv.android.xposed.installer_v32_de4f0d.apk .
Click to expand...
Click to collapse
Thanks for report.

First want to say much thanks for this thread, it was getting frustrating trying to find a solution.
I have encountered a slight issue trying to unstuck 2 of these devices.
neither have been rooted and are stock devices.
i cant seem to get cwm to locate the backup that you supplied.
do i need to copy it to the cwm backup folder on my sd card?

Jingbadguy said:
First want to say much thanks for this thread, it was getting frustrating trying to find a solution.
I have encountered a slight issue trying to unstuck 2 of these devices.
neither have been rooted and are stock devices.
i cant seem to get cwm to locate the backup that you supplied.
do i need to copy it to the cwm backup folder on my sd card?
Click to expand...
Click to collapse
Yes you do. Copy it to your sd card. Btw if your device is stock why do you want to restore this one?

kirito9 said:
Yes you do. Copy it to your sd card. Btw if your device is stock why do you want to restore this one?
Click to expand...
Click to collapse
both are stuck in bootloader.
i was assuming i could just just reflash...
cant find a stock copy anywhere...

Jingbadguy said:
both are stuck in bootloader.
i was assuming i could just just reflash...
cant find a stock copy anywhere...
Click to expand...
Click to collapse
Oh I thought they were working. Follow the procedure above to fix.

NuVision TM101A510L
Will this method work with the NuVison TM101A510L. It seems like a lot of work to do if I'm not sure about this model. Also I have a problem with this model overheating and crashing when I play Pixel Gun 3d and it's pissing me off. I just fired off a curse filled missive to NuVision support. They don't even list this model on their registration page and it seems they have no faith in this model. I will never buy this brand again, in fact I would recommend against it to my customers. I've used Azpen tablets with no problem rooting or playing Pixel Gun 3d. I took a chance and I'm so damned sorry I did.
;angry

Thank you so much for this thread!!! I have been looking for a recovery for a few months now and cant believe I didn't find this until now...

ok so a minor problem... I cant seem to flash the recovery... Not sure if ive placed the recovery file on my sd card properly or not cause i locate a few backup files none of which have any effect. I gave up in frustration untill now. ( Currrently working on a few androids one rooting one imea changing so figured id take a crack at these devices again. THe layer of dust on these things are getting a bit thick.)

williamglick said:
Will this method work with the NuVison TM101A510L. It seems like a lot of work to do if I'm not sure about this model. Also I have a problem with this model overheating and crashing when I play Pixel Gun 3d and it's pissing me off. I just fired off a curse filled missive to NuVision support. They don't even list this model on their registration page and it seems they have no faith in this model. I will never buy this brand again, in fact I would recommend against it to my customers. I've used Azpen tablets with no problem rooting or playing Pixel Gun 3d. I took a chance and I'm so damned sorry I did.
;angry
Click to expand...
Click to collapse
I think the models numbers are specific so I can't say for certain that this will work with your tab. Try the fastboot/rooting procedure first and then maybe you can just restore the system partition only not corrupting the boot/kernel.

Unidave199 said:
Thank you so much for this thread!!! I have been looking for a recovery for a few months now and cant believe I didn't find this until now...
Click to expand...
Click to collapse
You're welcome. I waited months also before finding a working backup.

Jingbadguy said:
ok so a minor problem... I cant seem to flash the recovery... Not sure if ive placed the recovery file on my sd card properly or not cause i locate a few backup files none of which have any effect. I gave up in frustration untill now. ( Currrently working on a few androids one rooting one imea changing so figured id take a crack at these devices again. THe layer of dust on these things are getting a bit thick.)
Click to expand...
Click to collapse
You are using the fastboot method correct? If the recovery script says finished as in no errors show on the screen then it could be the device itself. What do you see?

kirito9 said:
You are using the fastboot method correct? If the recovery script says finished as in no errors show on the screen then it could be the device itself. What do you see?
Click to expand...
Click to collapse
ill let you know just as soon as i can get back to working on those devices... im prety sure if memory serves correctly, that I was getting some errors regarding unable to mound sd or ext sd. I could be wrong but thats what comes to mind.
Im up to my neck in jobs on other devices. (rooting galaxy S5, changing imei on another S5, IMEI change on a LG Stylo 2 plus, Galaxy Tab 2 system issues need to diagnose, and several screen and lcd replacments)

STUCK
ok so i have a little time to work on these....
When i run the launch.bat and get to fastboot, it goes through the instalation and everything checks ok till the very end where it says failed cause too many links.
included the screenshot so you can see.
At this point im unsure if i just need to try flashing the supersu zip like it instructs but having tried befor it had no luck.
can I not just flash twrp on this thing then su like with most root methods?

after ive flashed super su, when i go to restor the working backup i see a list of backups... including yours but when i select it i always get :
checking md5 sums...
md5 mismatch!
what now?
(i tried just flashing the boot but even that comes back with same error)
I know on other devices the recovery is an img file any the one you provide is a rar... i extracted to my desktop and was gonna try flashing with abd/fastboot but since its not an img file, im thinking it wont work...
any thoughts?
Im still unsure how to flash the recovery that u supply in the section for fixing bootloop....

Jingbadguy said:
ok so i have a little time to work on these....
When i run the launch.bat and get to fastboot, it goes through the instalation and everything checks ok till the very end where it says failed cause too many links.
included the screenshot so you can see.
At this point im unsure if i just need to try flashing the supersu zip like it instructs but having tried befor it had no luck.
can I not just flash twrp on this thing then su like with most root methods?
Click to expand...
Click to collapse
The too many links error is common for this device. Touch doesn't work with TWRP on this device so CWM is out only go. You can root and using cwm like any other root method.