Database Info

[GUIDE] :: SuperPad/FlyTouch2/WWE10 Android 2.2 V2.5 #4325 Froyo USB Flashing ::

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This guide is for:
SuperPad / Flytouch2 / WWE10 Tablets
Make sure you've got the right device.
- Infotmic 10.2" Flytouch2 SuperPAD
- It has 256MB RAM
- It has 2GB Internal Storage
- Android OS 2.1
- Have 2 MicroSD Card Slots
- 1024x600 Screen Resolution
- Infotmic X210 Processor
This ROM is NOT for you if your device is SuperPad 2 / Flytouch 3
- Infotmic 10.2" Flytouch2 SuperPAD
- It has 512MB RAM
- It has 4GB Internal Storage
- Android OS 2.2
- Have 1 MicroSD Card Slots
- 1024x600 Screen Resolution
- Infotmic X220 Processor
-------------------------------------------
Warning: Follow these steps. All of them. If you do, it will work. If you misread or miss a step or skip a step because you are hurrying through the process, it WILL brick your tablet. Flashing is a relatively simple process but it requires patience. If you don't have the time to read all of the directions and follow them, YOU DO NOT HAVE TIME TO FLASH, and stick with your old firmware.
I AM NOT RESPONSIBLE FOR ANY DAMAGE THAT THIS ROM HAS CAUSED. FLASH AT YOUR OWN RISK! SINCE THERE ARE SO MANY CLONES OF THIS TABLET, DON'T EXPECT IT WILL WORK PERFECTLY.
-------------------------------------------
Note: I'm not so good in English and grammar, so bear with me. The images is not so clear co'z im using webcam for fast capture and focusing.
If I made mistakes, corrections are welcome.
:: Super Improvement ::
- Much Faster response, you will notice playing Angry Birds is smoother.
- New Default Application updates
- New Icons
- New 3D Gallery
- Supports Flash on browser.
- GPS is now working, GPS app required to test the satellite lock.
- Youtube on browser working fine if you have fast connection.
:: Known Issues ::
- "Some" RJ45 (Ethernet) Port sometimes not working
- "Some" WiFi unstable
- "Some" 3G Device not working
- Market is still free, no paid apps.
- Save path not on MicroSD but inside your Tablet (fixed)
- When it sleeps, it sleep to power off.
- Youtube App is not working, you need to download another compatible version.
:: Thanks to the Donors ::
- Austin Pc Fixed .Com
- frank rugolo
- pastorb1
:: Credits ::
- stragulus
- dgcruzing
- isergio
- _barsuk_
- Aries on an Android (android tablet forum)
- rgocal (android tablet forum)
- and others who I forgot to mention
This guide is for Windows XP, I'm windows7 user before but I downgrade because I want to use my other old softwares for flashing. If you get the idea you can do this also on windows7.
------------------------------
NOTE:
- For windows7 user Run As Administrator the IUW application.
- 64bit Operating System may not work with IUW application.
------------------------------
NOTE: If your tablet showing version 6.1.5 (559[or higher]) or 0.6.1.2(587) Then you can skip some part of the guide. Scroll down directly to the "Alternative Solution" using MicroSD burning. You still need to download the Android 2.2 Froyo Main Firmware.
------------------------------
:: Preparing the Male to Male USB Cable :: (if you have one skip this)
Ok let's start, what you need is a male to male USB cable, if you don't have one you can make your own male to male cable.
Tools
- 2 USB Cable
- Scissor or Cutter
- Electrical Tape or anything to cover the exposed wire
- Solder Lead (Optional)
- Soldering Iron (Optional)
1. Cut each USB to the nearest tip of the female, to make your USB cable longer.
2. Cut each end of the USB to expose the wires and copper wires.
3. Now you can connect each end of the USB, and twist each wires, you can solder it if you like.
4. Now you can tape each wires, and tape all the wires.
This is the finish product.
:: Preparation for Files and Flashing Procedures ::
*Note: Please PM me if there are missing links.
Download IUW 1.1 Flashing Tool
Download Firmware V2852
Download Uboot - V 0.6.1.2(587) working camera
Download Main Android 2.2 Froyo ROM with Flash 10.1
Download New Ramdisk image to change the path of save files to SDCard1
Download Extra Tools Apps
Updated ROM: 25.11.2011
Download Firmware Froyo 2.2 v2.5 #4325
------------------------------------------------------------
:: Clean up the tablet files ::
- Wipe cache partition
- Wipe data/factory reset
- then reboot.
Remove all microSD so that it will not start burning if you have firmware on your microSD.
Visit this link how to clean the data for your tablet.
------------------------------------------------------------
:: Let's Start ::
1. Make a Folder on your desktop for fast track of your files, I named it Froyo 2.2 and save all your downloaded files here.
2. Download IUW Flashing tool, and save it inside the folder of your desktop.
3. After download, unpack it inside the folder.
NOTE: Your tablet should be full charged, and connect the charger while flashing, just to make sure it will not drain much power on your tablet. Don't forget also to remove all your MicroSD cards from the tablet.
4. Since your done making your USB Cable, your tablet should be off and plug the other end USB to the PC and plug the other end on your tablet USB Port between the headphone jack and SDCard Slot 1.
5. Open the IUW application, select Link USB on the left side. And on the Link information the DV (driver) is greyed, because it's not detecting the tablet with driver.
6. Power up the tablet with this combination Power + Menu button for few seconds until you see the message on your tablet "Communicating with PC..."
7. A New Hardware notification will pop up on your PC Screen.
(you have 2 minutes to setup this or the tablet will boot normally)
Select Advance, Next.
Browse the driver from your desktop inside the folder "otg_driver"
Then it will install the driver.
The flasher will turn to green.
:: FLASHING V2852 ::
This rom will only run on tablets which display a version number in the bottom-right "Infotmic" screen when first turned on.. If yours doesn't display a number there, you will need to flash firmware v2852 first.
8. 'Choose a wrapped image' press the "..." button Select the IUS file "WWE10B_Android_393477-v9full.ius"
9. Click 'burn' to flash the tablet.
This picture is flashing the tablet.
10. After burning finishes, plug out the USB cable and press Reset, then restart the device.
:: Flashing UBOOT ::
11. Open UIW application, and connect your tablet USB to PC.
12. Select "Link USB" on "USB Mode:" select "Expert Mode" Uncheck all except "UO".
13. Browse the "u-boot-nand.bin" the one with working camera.
14. After flashing this is the result.
15. Your screen with start to flicker, it will start to initialize.
16. I will take time to load up, until you are in display calibration.
:: Flashing IMAGES ::
17. Power off your tablet, and prepare again the UIW to flash the main android 2.2 firmware.
18. Click Link USB, and select Expert burn.
NOTE: Use the other Ramdisk.img fix you download, not from the flash10.1-android2.2 folder.
19. Power up the tablet with this combination Power + Menu button for few seconds until you see the message on your tablet "Communicating with PC...", if the Dv is green your ready and click the burn button.
20. I will take time to load up, until you are in display calibration and your Done!
:: Alternative Solution ::
If you cant burn the main android image using USB method. You can try the MicroSD card method, but this is only applicable if your tablet will display the version under the InfoTMIC start up logo.
Lets make a bootable MicroSD, to convert the file size to 700~705MB, you need a MicroSD at least 1GB.
Download WinHex with MicroSD Clone Image.
1. Open your WinHex
2. Click Tools->Disk Tools->Clone Disk->
3. On Source Raw Image: click the file button.
locate the "aben.start sector" file, click open.
4. On Destination Medium: click the drive button.
locate the Physical Media of your card reader/MicroSD, ok.
5. Fill in the Start Sector with 0 (zero).
6. Click OK, and WinHex pop up will appear, click OK and it will start cloning the image file to your MicroSD.
7. A notepad will pop up that you are done cloning the image, close and press OK on the pop up message.
8. Close WinHex, and safely remove the card reader/MicroSD.
9. Plug the card reader/MicroSD again, and do a quick format.
10. If you successfully formated the MicroSD to 700~705MB then create an "android" folder, and copy all the main image files on the folder. And your Done! :: If you fail there are some other reason, some card reader is not working properly, try to find another card reader, if your phone has MicroSD Slot and able to communicate and serve as card reader, you can use this also.
- ramdisk (use the other ramdisk you download)
- system
- uImage
- userdata
some optional or skipped file.
- u-boot-nand (android v2.2)
- zSYS (Flytouch Official Image 3245)
This is what's inside the MicroSD on android folder.
12. After copying the files plug the MicroSD at the top most/Slot 1 between the 2 USB port.
13. And Power On your Tablet, and it will start Flashing just like here on the video. http://www.youtube.com/watch?v=47kf4-Vbba8#t=3
You can also use this MicroSD to downgrade back to 3245 firmware.
Thank you.
Don't forget to click the Thank You button
joshgabel said:
SmaRkieS whats your Paypal email address? i owe you $ worked like a charm!
Click to expand...
Click to collapse
Confirmed that the 3G USB modem Huawei E1752 is working perfectly. Just create an APN and reboot while the Huawei E1752 is in the USB port.. After startup it makes a connection and works fast!
manually created an APN in settings/connections/mobile providers and configured for your local provider. Also enabled data connection, otherwise I won't start searching. After that reboot and it started working. No specials actions required.
:: Google Sync ::
If you want to sync the calendar (basic) and contacts go to:
Contacts-> Menu-> Accounts-> Add Account-> Corporate-> enter data for a google account -> choose the default setting -> set the sync options-> Enter the name
:: z4root USB Debug solution ::
1. Download Launcher Pro.
2. Install Launcher Pro.
3. Tap the Home Button at the upper left, it will let you choose different type of launchers.
4. Select Launcher Pro.
5. Tap Menu Button = or at press the menu button at the top of your tablet.
6. Tap the + add
7. Tap Shortcuts
8. Scroll Down, and Tap the Activities.
9. Wait it will load, scroll down to Settings.
10. Scroll down and look for Development.
11. Press OK without changing the name.
12. On Desktop/Home Tap Development.
13. Check the USB Debugging.
14. Restart if necessary.
15. And your done ready to root.
:: Enabling Live Wallpapers ::
1. After rooting your device, your good to go.
2. Install Busybox Installer.
3. Open Busybox Installer, OK, SuperUser request Allow.
4. If BusyBox is not found, tap Install.
5. Press Back Button on your tablet.
6. Install Terminal Emulator.
7. Open Terminal Emulator.
8. Type this commands.
Code:
su
mount -o remount,rw,codepage=utf8,vfat,xattr,check=no /dev/stl5 /system
cat /sdcard/LiveWallpapersPicker.apk > /system/app/LiveWallpapersPicker.apk
cat /sdcard/libRS.so > /system/lib/libRS.so
cat /sdcard/librs_jni.so > /system/lib/librs_jni.so
sample pic of my terminal emulator, I made a mistake in line 5 but it's ok just retype it.
9. Reboot your tablet.
10. Install your live wallpaper apps.
11. On your home screen, tap the menu button. (near the volume next to back)
11. Tap Wallpaper
12. Tap Live wallpapers
13. Select your live wallpapers, and your done.
sample screen shot.
:: GPS Configuration and Setup ::
Download GPS Test Tool
1. Install that app in your tablet.
2. Go to Settings
3. Go to Location & Security
4. Check Use wireless networks
5. Check GPS Satellites
6. Plug your GPS Antenna.
7. Take your antenna outdoor, if the wire is still long try to place the antenna higher.
8. Connect to your WiFi.
9. Run the GPS Status application.
10. Wait for 5~20 mins for satellite discovering and locking.
11. Wait for 5 satellite lock on and you are done.
12. Run your Google Maps, and your locked to your location.
This is the picture number of satellites and number of locked satellites.
The GPS is very accurate.
:: Dismantle/Dissemble of Superpad/Flytouch2 ::
http://www.androidtablets.net/forum/gome-flytouch-ii/14255-inside-my-superpad.html
===========================================================
This is my screen now.
with new virtual keyboard.
I also try swapper2, they say it can improve the performance. This is my Terminal Emulator.
Other Useful Guides here.
http://forum.xda-developers.com/showthread.php?t=1067746
http://forum.xda-developers.com/showthread.php?t=1048776
http://forum.xda-developers.com/showthread.php?t=831178
-------------------------------------

Good work
25-12-2012 -updated links
Download IUW 1.1 Flashing Tool iuw1.1-english.rar - 291.98 KB
Download Firmware Froyo 2.2 v2.5 #4325 - 4325.zip - 212.16 MB
Download Uboot - V 0.6.1.2(587) working camera u-boot-nand.zip v0.6.1.2(587).zip - 130.13 KB
Download New Ramdisk image to change the path of save files to SDCard1 Ramdisk_SmaRkieS.zip - 166.06 KB
Barsik recovery for superpad flytouch - recovery_rd.zip - 1.32 MB

Thank you, cause this people are lazy enough to open the pdf/docx file instructions hehehehe.
I made some mistakes on my post, please post some corrections and suggestions are welcome also.

Thank u for your instructions. Its the first time I manually try to flash my pad so I had to flash to 2852 rom first and it does but when i restart and check my version build it is still on build 1561 (flashing with usb cable).
Tried couple of times can u help me out?

kolk11 said:
Thank u for your instructions. Its the first time I manually try to flash my pad so I had to flash to 2852 rom first and it does but when i restart and check my version build it is still on build 1561 (flashing with usb cable).
Tried couple of times can u help me out?
Click to expand...
Click to collapse
Can you see the version under the InfoTMIC start up logo?
If you can see it then you are ready to update using MicroSD method.

@smarkies
no there is no version number
first time I connected to pc it said found new hardware but no driver. There I selected the otg driver in the package.
Burntool does connect and goes up from 0 to 100 procent (very quick about 7 secs.) when i burn but when i check im still on my previous build.
After that I tried to update to other firmware using update.zip on winhexed sd card. This did work so now I am on 1623 build.
after that I tried again using burntool but still didnt work out.
In the folder containing the 2852 rom there are also two folders
0.6.1.2_1.4.587_OV2655 and
0.6.1.5_1.4.587_GT2005
both contain uboot and uboot nand files is there something I have to do with them before I can flash?
Any advice?
Other thing I noticed: in recovery menu there is a line saying:
e:can't open / cache / recovery / command
It didnt stop me from update with update zip but could it be the reason burntool isnt working for me?

kolk11 said:
@smarkies
no there is no version number
first time I connected to pc it said found new hardware but no driver. There I selected the otg driver in the package.
Burntool does connect and goes up from 0 to 100 procent (very quick about 7 secs.) when i burn but when i check im still on my previous build.
After that I tried to update to other firmware using update.zip on winhexed sd card. This did work so now I am on 1623 build.
after that I tried again using burntool but still didnt work out.
In the folder containing the 2852 rom there are also two folders
0.6.1.2_1.4.587_OV2655 and
0.6.1.5_1.4.587_GT2005
both contain uboot and uboot nand files is there something I have to do with them before I can flash?
Any advice?
Other thing I noticed: in recovery menu there is a line saying:
e:can't open / cache / recovery / command
It didnt stop me from update with update zip but could it be the reason burntool isnt working for me?
Click to expand...
Click to collapse
dont touch any file inside the folder of 0.6.1.2_1.4.587_OV2655 and 0.6.1.5_1.4.587_GT2005.
Try to burn the UO first, u-boot-nand.bin the one with working camera, if not try this another u-boot-nand.
Then burn the Main Image Android Rom.

Thanks for the quick repy to be sure I wont Brick my Pad
for the uo file I use Uboot - V 0.6.1.2(587) or uboot - 0.6.1.5 (587)
and for the ROM files I only use files from the 20110416-v1001 folder?
If so I will burn right away

kolk11 said:
Thanks for the quick repy to be sure I wont Brick my Pad
for the uo file I use Uboot - V 0.6.1.2(587) or uboot - 0.6.1.5 (587)
and for the ROM files I only use files from the 20110416-v1001 folder?
If so I will burn right away
Click to expand...
Click to collapse
I abused my pad flashing many times, and still it is alive, It will brick if your USB cable is poorly made, or overpowered that will fry the motherboard of your tablet, just like what happen to other people.
the safest way to flash is microSD, but it is tricky with this froyo update that's why I risk on flashing using USB.
V 0.6.1.2(587) this one has working camera. But you can try both uboot to display the version under the InfoTMIC logo. But I use V 0.6.1.2(587) coz I want the camera to work fine.
Yes the files inside the 20110416-v1001 folder except for the u-boot-nand inside.
If the USB flashing doesnt work you can try the alternative, using the microSD.

Thank u very very much worked like a chime.
camera and wifi are working I used uo V 0.6.1.2(587)
will play with it tonight to see what else it can do now
Greetz

kolk11 said:
Thank u very very much worked like a chime.
camera and wifi are working I used uo V 0.6.1.2(587)
will play with it tonight to see what else it can do now
Greetz
Click to expand...
Click to collapse
Glad you made it! Check out the speed and the Gallery is now 3D
So you did the UO burn first then Main Image?
Confirm this and I will revise my post.
Co'z I burn my tablet the other way. Main Image then UO.

Yep U0 first than main Rom
Only thing is market has only free apps
but doesnt matter can get apps all over the internet

kolk11 said:
Yep U0 first than main Rom
Only thing is market has only free apps
but doesnt matter can get apps all over the internet
Click to expand...
Click to collapse
Thank you for the confirmation.
Confirm this again.
First: WWE10B_Android_393477-v9full.ius burn
Second: UO burn
Third: Main Image burn
Check my post, applanet can help you with that hehehehe.
This is my screen now.
with new virtual keyboard.
I also try swapper2, they say it can improve the performance. This is my Terminal Emulator.

IUW does not work with 64 bit
Please add in the OP that some on other forum sites have confirmed that IUW does NOT work with any 64 bit operating system.
I will link to reference if I come across it again...
For Development USB debugging options for Z4Root, you may also want to link to my post HERE.

quick tip for windows 7 users, picture 6 will not happen, at least it didn't for me, you need to navigate to devices and printers, find the unknown device, and manually install the otg driver

Works as advertised.
I bricked my tab first, but got it up and running again with your step by step guide. Many thanks!

I followed your instruction for SD card and it worked perfectly. I now have the 3925 version on my Superpad and it seems to be working well. Definite improvement on Angry Birds(which I play way too much) and Home Run Battle 3D. WiFI works fine, don't know about GPS or camera as I don't really use them, but I will check just for curiosity sake Seems to be faster and I have had no random lockups that I had with the v5 I had on previously. I will report back as I use it. Thanks for all the great work!

Jiggity Janx said:
Please add in the OP that some on other forum sites have confirmed that IUW does NOT work with any 64 bit operating system.
I will link to reference if I come across it again...
For Development USB debugging options for Z4Root, you may also want to link to my post HERE.
Click to expand...
Click to collapse
Yes, that's why I made it with Windows XP, and we are aware that 64bit OS is so choosy in terms of software compatibility.
About the USB Debugging, I already made a guide after the Flashing/Burning guide.
caravanman said:
quick tip for windows 7 users, picture 6 will not happen, at least it didn't for me, you need to navigate to devices and printers, find the unknown device, and manually install the otg driver
Click to expand...
Click to collapse
Yes, It is self understanding, there is a note above I use windows XP, but the idea is still there.
If you like to contribute for a guide in windows 7 is welcomed.
nullandvoid said:
I bricked my tab first, but got it up and running again with your step by step guide. Many thanks!
Click to expand...
Click to collapse
You are welcome, enjoy your new faster tablet.
woodeman said:
I followed your instruction for SD card and it worked perfectly. I now have the 3925 version on my Superpad and it seems to be working well. Definite improvement on Angry Birds(which I play way too much) and Home Run Battle 3D. WiFI works fine, don't know about GPS or camera as I don't really use them, but I will check just for curiosity sake Seems to be faster and I have had no random lockups that I had with the v5 I had on previously. I will report back as I use it. Thanks for all the great work!
Click to expand...
Click to collapse
Thank you so much, but I would like to suggest to remove the long quote of my post, just to make the thread clean.

SmaRkieS said:
Thank you for the confirmation.
Confirm this again.
First: WWE10B_Android_393477-v9full.ius burn
Second: UO burn
Third: Main Image burn
Check my post, applanet can help you with that hehehehe.
FOr your confirmation I directly made the UO burn and than burned the main image burn never touched WWE10B_Android_393477-v9full.ius
Where can I find your post on applanet to get market running?
Thanks in advance
Click to expand...
Click to collapse

kolk11 said:
SmaRkieS said:
Thank you for the confirmation.
Confirm this again.
First: WWE10B_Android_393477-v9full.ius burn
Second: UO burn
Third: Main Image burn
Check my post, applanet can help you with that hehehehe.
FOr your confirmation I directly made the UO burn and than burned the main image burn never touched WWE10B_Android_393477-v9full.ius
Where can I find your post on applanet to get market running?
Thanks in advance
Click to expand...
Click to collapse
pmed you.
Click to expand...
Click to collapse

[GUIDE]Yuntab P500 (M5000) Rooting Guide and ROM

NOTE: The rooting method may have the potential to BRICK the phone and will void your warranty, so do it at your own RISK. I am not responsible for any problems caused by this guide..
I recently bought a Yuntab P500 PDA Smartphone 5 inch Screen Android. Here are its main features:
CPU: Qualcomm MSM7227a 1.0GHz / Adreno 200 GPU.
Display: 5.0 inch Mulititouch screen, 800 x 480px.
OS: Android 4.0 Ice Cream Sandwich.
Memory: 512MB RAM 8GB ROM.
Camera: Dual Cameras Back: 5MP, Front: 0.3MP.
Bluetooth 2.1 +EDR, Bluetooth stereo (A2DP).
I am very pleased with the phone but still wanted to root it. However, I found it is very hard to root the phone because there is lacking of information of it on the Internet.
Its driver files are included on the phone internal rom with a folder called 'android4.0_usb_driver_32bit'. Once you connect the phone with USB Debugging enabled, you will see a new CD drive, double click it and copy the whole folder to your computer.
However, Its driver is not working on my Windows 7 64 bit laptop, so I had to try my XP one and it took a while to install all drivers. Then I followed this instruction to try Root_with_Restore_by_Bin4ry, I got the message to say the phone was rooted but it was not working at all.
Luckily, I found Karbonn A15 is similar to Yuntab P500, so followed ntstatic's instruction to have another try.
I followed the following steps to use Android Root Unlock, DON'T try anything else including A15 driver, it may BRICK your phone!
1. Enable USB Debugging - Under SETTINGS - DEVELOPER OPTIONS
2. Install the drivers for the phone - copy drivers from your phone internal card.
3. download "Android Root Unlock" from sourceforge.net and extract it to a folder on your harddisk
4. navigate to the above folder and run the batch file ICS_Root_Unlocker.bat
the batch file will reboot your phone a couple of times and will wait with a message "Press Any Key to continue"
IMP NOTE : if you pc is saying "PRESS ANY KEY" note if your phone is on or rebooting....
if it is Rebooting, wait for it to start before pressing a key
5. After a couple of boots the phone will be rooted
6. verify that the Root is complete by observing a "Superuser" shortcut in the application list
Thanks for that guide, now my phone has been rooted successfully.
I hope this will help people like me. Good luck.
I got the ROM from a Chinese guy. I haven't tried them yet, so flash them at your OWN RISK as well.
OTA Zip format: P500W-ota-1.0.623_20120908.zip
BIN format and the updating tool: P500W_1.0.623_20120908_SHIP & Porter

In Response...
freegoat said:
NOTE: The rooting method may have the potential to BRICK the phone and will void your warranty, so do it at your own RISK. I am not responsible for any problems caused by this guide..
I recently bought a Yuntab P500 PDA Smartphone 5 inch Screen Android. Here are its main features:
CPU: Qualcomm MSM7227a 1.0GHz / Adreno 200 GPU.
Display: 5.0 inch Mulititouch screen, 800 x 480px.
OS: Android 4.0 Ice Cream Sandwich.
Memory: 512MB RAM 8GB ROM.
Camera: Dual Cameras Back: 5MP, Front: 0.3MP.
Bluetooth 2.1 +EDR, Bluetooth stereo (A2DP).
I am very pleased with the phone but still wanted to root it. However, I found it is very hard to root the phone because there is lacking of information of it on the Internet.
Its driver files are included on the phone internal rom with a folder called 'android4.0_usb_driver_32bit'. Once you connect the phone with USB Debugging enabled, you will see a new CD drive, double click it and copy the whole folder to your computer.
However, Its driver is not working on my Windows 7 64 bit laptop, so I had to try my XP one and it took a while to install all drivers. Then I followed this instruction to try Root_with_Restore_by_Bin4ry, I got the message to say the phone was rooted but it was not working at all.
Luckily, I found Karbonn A15 is similar to Yuntab P500, so followed ntstatic's instruction to have another try.
I followed the following steps to use Android Root Unlock, DON'T try anything else including A15 driver, it may BRICK your phone!
1. Enable USB Debugging - Under SETTINGS - DEVELOPER OPTIONS
2. Install the drivers for the phone - copy drivers from your phone internal card.
3. download "Android Root Unlock" from sourceforge.net and extract it to a folder on your harddisk
4. navigate to the above folder and run the batch file ICS_Root_Unlocker.bat
the batch file will reboot your phone a couple of times and will wait with a message "Press Any Key to continue"
IMP NOTE : if you pc is saying "PRESS ANY KEY" note if your phone is on or rebooting....
if it is Rebooting, wait for it to start before pressing a key
5. After a couple of boots the phone will be rooted
6. verify that the Root is complete by observing a "Superuser" shortcut in the application list
Thanks for that guide, now my phone has been rooted successfully.
I hope this will help people like me. Good luck.
Does anybody know where to obtain the ROM of the phone? Thanks in advance.
Click to expand...
Click to collapse
Thank you for all the work you've put into this project. Unfortunately for me, I am unable to root my Yuntab aka Cobalt SP500. When running the batch file, I received the following: failed, failed, failed after every Press Any Key to Continue message. Now, I am using Windows 7 under the 64-bit architecture. Is this possibly the reason?

dcsoul said:
Thank you for all the work you've put into this project. Unfortunately for me, I am unable to root my Yuntab aka Cobalt SP500. When running the batch file, I received the following: failed, failed, failed after every Press Any Key to Continue message. Now, I am using Windows 7 under the 64-bit architecture. Is this possibly the reason?
Click to expand...
Click to collapse
Yes, to root Yuntab P500, you will have to use XP 32-bit.

have a p500, has dated rom post published here, such as making backup?
thanks

have yuntab p500 usb otg?

thanks for this, sadly this method doesn't works from me.
searching I found a alternative, I tell about a site that posted a solution that I tested on my p500 and worked:
http://isytec.net/manual-video-root-yuntab-p500/
the bad thing is that the root program that it puts appears to be chinesse.... the right button is "OK" and from program can configure if allows or deny (all in chinesse) but works well
regards

hi,
has anybody successfully installed one of the firmwares from post # 1 ? thanks.

Yuntab p500
pogodancer said:
hi,
has anybody successfully installed one of the firmwares from post # 1 ? thanks.
Click to expand...
Click to collapse
HERE IS THE LATEST ROM FOR YUNTAB. I HAVE NEVA TRY IT COS I DONT HAVE ONE WITH ME.
YOU CAN DOWNLOAD IT FROM THE SITE BELOW. IT IS A JELLY BEAN 4.2
http://www.needrom.com/mobile/yuntab-p500/

muammil said:
HERE IS THE LATEST ROM FOR YUNTAB. I HAVE NEVA TRY IT COS I DONT HAVE ONE WITH ME.
YOU CAN DOWNLOAD IT FROM THE SITE BELOW. IT IS A JELLY BEAN 4.2
http://www.needrom.com/mobile/yuntab-p500/
Click to expand...
Click to collapse
Thanks but this is the same rom as linked in post 1. It is Android 4.0.4 ICS.
Another question: How can I install the Google Playstore on the phone. Playstore app is not installed in stockrom. Thanks.

ROOT & Playstore
Hi,
I have to add that I bought the Yuntab P500 on AliExpress for 70 USD. This is definetly the best low budget smartphone I ever had. The build quality is not like a Samsung's but it's OK. It has a big 5 inch screen :good: with a small viewing angle . It runs not bad with the 1 GHz single-core-CPU and 512 MB RAM . It has 8 GB ROM and the fast WCDMA :good:. The battery seems to be very good :victory:. I think it is not easy to find a device which is similar good for this price.
But unfortunately the Android 4.0.4 ICS system is not rooted and does not have Google Playstore installed .
Solution:
======
1. ROOT:
On the phone storage or in the firmware downloads (see the links in this thread) you find the Windows drivers in the folder "android4.0_usb_driver_32bit". These drivers work excellent on my Windows 7 32bit computer. Connecting the P500 with drivers installed it gives me 3 entries in the device manager (Android phone + Qualcomm COM-port + Qualcomm modem):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For rooting the P500 I tried the above mentioned "ICS Root Unlocker 1.0" and "RomasterSetup_3_2_8". But there was no success. But after that I was successfully rooting with "Root_with_Restore_by_Bin4ry_v31" from here: http://forum.xda-developers.com/showthread.php?t=1886460
2. GOOGLE PLAYSTORE:
As the "GoogleServicesFramework.apk" is already installed on the P500, I only downloaded a "MarketUpdater.apk" and a "Vending.apk" from the web. I put my "RootExplorer.apk" and the "MarketUpdater.apk" + "Vending.apk" to the internal storage. After installing RootExplorer I copied "MarketUpdater.apk" + "Vending.apk" into system/app and gave the same attributes to them just like the other apps have. After that I installed the "Vending.apk" and rebootet the P500. Playstore is working fine now - there was not any app that I could not find.
Have fun with this nice phone !
Summary to the P500: I you can root and install the playstore or if you have somebody to do this for you, this phone is a great deal for 70 USD. Earlier I had a 4-inch-phone with a Spreadtrum SC6820 SOC without WCDMA and a faked Android 4 for 50 USD, which was a bad Android phone. After that I had an 4-inch MTK6572 device without WCDMA and only 256RAM/512ROM and Android 4.2 for 60 USD which was better but to weak with RAM and ROM. And now I have the P500 for 70 USD. Here everything sticks together very fine to be a good smartphone which is worth each cent. So if you want a cheap phone and you see the P500 for this price, don't hesitate to buy.

freegoat said:
Luckily, I found Karbonn A15 is similar to Yuntab P500, so followed ntstatic's instruction to have another try.
I followed the following steps to use Android Root Unlock, DON'T try anything else including A15 driver, it may BRICK your phone!
[...]
BIN format and the updating tool: P500W_1.0.623_20120908_SHIP & Porter
Click to expand...
Click to collapse
I recently got my YunTab P500, but the primary camera is not working. When starting any Camera-App I always get the commonly known "Can't connect to Camera"-Error. I think I tried nearly every solution one could imagine:
- do ota-update
- do bin update
- empty camera cache
- install alternate camera applications
- factory reset
- empty cache via factory recovery
- set permissions for the camera-app
- use JB-Camera and change cameras (though this worked: after restarting the camera app, I got the video-phone-camera)
So far nothing worked for me. I think the most simple solution would be, to send in the mobile and get my money back. Sadly the seller doesn't answer my support requests - I think he's gone.
I think asking here is my last chance to find someone to help me. Estimating this is no hardware-bug I think theres only one solution:
The installed kernel doesn't come with the proper instructions for the camera. This would be a proper explanation, if the Bin-Update doesn't come with the kernel image (which I dont know).
You, freegoat, mention not to use anything from a15/W719 roms. Did you try that or is it only a general suggestion? If you tried: What was the result? Because in the a15-Thread they've got boot.img (which as far as I know usually includes the kernel)...
Thank you for your help,
Boredland

pogodancer said:
Hi,
I have to add that I bought the Yuntab P500 on AliExpress for 70 USD. This is definetly the best low budget smartphone I ever had. The build quality is not like a Samsung's but it's OK. It has a big 5 inch screen :good: with a small viewing angle . It runs not bad with the 1 GHz single-core-CPU and 512 MB RAM . It has 8 GB ROM and the fast WCDMA :good:. The battery seems to be very good :victory:. I think it is not easy to find a device which is similar good for this price.
But unfortunately the Android 4.0.4 ICS system is not rooted and does not have Google Playstore installed .
Solution:
======
1. ROOT:
On the phone storage or in the firmware downloads (see the links in this thread) you find the Windows drivers in the folder "android4.0_usb_driver_32bit". These drivers work excellent on my Windows 7 32bit computer. Connecting the P500 with drivers installed it gives me 3 entries in the device manager (Android phone + Qualcomm COM-port + Qualcomm modem):
For rooting the P500 I tried the above mentioned "ICS Root Unlocker 1.0" and "RomasterSetup_3_2_8". But there was no success. But after that I was successfully rooting with "Root_with_Restore_by_Bin4ry_v31" from here: http://forum.xda-developers.com/showthread.php?t=1886460
2. GOOGLE PLAYSTORE:
As the "GoogleServicesFramework.apk" is already installed on the P500, I only downloaded a "MarketUpdater.apk" and a "Vending.apk" from the web. I put my "RootExplorer.apk" and the "MarketUpdater.apk" + "Vending.apk" to the internal storage. After installing RootExplorer I copied "MarketUpdater.apk" + "Vending.apk" into system/app and gave the same attributes to them just like the other apps have. After that I installed the "Vending.apk" and rebootet the P500. Playstore is working fine now - there was not any app that I could not find.
Have fun with this nice phone !
Summary to the P500: I you can root and install the playstore or if you have somebody to do this for you, this phone is a great deal for 70 USD. Earlier I had a 4-inch-phone with a Spreadtrum SC6820 SOC without WCDMA and a faked Android 4 for 50 USD, which was a bad Android phone. After that I had an 4-inch MTK6572 device without WCDMA and only 256RAM/512ROM and Android 4.2 for 60 USD which was better but to weak with RAM and ROM. And now I have the P500 for 70 USD. Here everything sticks together very fine to be a good smartphone which is worth each cent. So if you want a cheap phone and you see the P500 for this price, don't hesitate to buy.
Click to expand...
Click to collapse
i was able to port the google play but how can i port CWM on the phone. is there any windows app or tool i can use to make my own CWM?
THANKS

@ muammil
Sorry but I don't have a working CWRM. If you are successfully it would be nice to post your solution. Thanks.
Sent from my Q6000 / Jelly Bean 4.2.1 using Tapatalk 4

Porting playstore on yuntab p500
pogodancer said:
@ muammil
Sorry but I don't have a working CWRM. If you are successfully it would be nice to post your solution. Thanks.
Sent from my Q6000 / Jelly Bean 4.2.1 using Tapatalk 4
Click to expand...
Click to collapse
AFTER I SUCESSFULLY ROOTED MY PHONE. I DOWNLOADED THE BELOW APPS
---------GOOGLE SERVICE.APK,
------------------------------------------------GOOGLEPLAY 4.1.10.APK
------------------------------------------------------------------------------------------LINK2SD.APK
-I FIRST INSTALL LINK2SD AND REBOOT THE PHONE
--I NOW INSTALL GOOGLE SERVICE AND LASTLY INSTALL GOOGLEPLAY.
---I OPEN LINK2SD
----SCROLL DOWN TO GOOGLE PLAYSTORE AND CLICK ON IT
-----TOUCH THE ACTION BUTTON AND SELECT CONVERT TO SYSTEM APP
------WAIT FOR IT TO FINISH THEN REBOOT AND ENJOY
IF IT HELP THEN THUMPS UP:good:

I thought you could post your success when you find a clockwork recovery. I wrote already how to install the playstore.
Sent from my Q6000 / Jelly Bean 4.2.1 using Tapatalk 4

^pogodancer
FOR THE CWM I HAVE NO IDEA WHERE TO START THATS Y I ASKED U IF THERE IS A TOOL. BUT WILL KEEP SEARCHING & IF SUCESSFULL I WILL POST IT HERE.
THANKS
---------- Post added at 09:09 AM ---------- Previous post was at 08:38 AM ----------
IM NOT A PROGRAMMER NOR DO I KNOW HOW TO USE LINUX CODE. BUT IF ANY1 CAN GUIDE ME I WILL APPRECIATE.
DOING MY RESEARCH I COME ACROSS THISWHICH IS A GUIDE ON HOW TO MAKE A CUSTOM RECOVERY FOR ANY DEVICE. BUT THE PROBLEM I HAVE HERE IS IM NOT A PROGRAMMER. CAN ANY1 HELP OUT. I CAN PROVIDE HIM WITH ALL THE PHONE IMAGE FILES HE NEEDS.
CHEERS

Star B94M / B943 MTK 6589 Quadcore

Star B943 (B94M) MTK6589 Quad Core 4.5Inch 1GB RAM 4GB ROM Dual Camera 5.0MP+12MP WCDMA 3G Dual SIM Card SmartpPhone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please pay attention, there are two versions of this devices on the Market!!!
One is with Dualcore and the other one is with Quadcore MTK6589.
So be carefully with Flashing and Rooting the devices.
There is already some progress with CWM and Root on German chinamobiles.org Forum.
-------------------------------------------------------- Testing LeWa Port Rom -------------------------------------------------------------------------------
Update 07.05.2013: LeWaport_Star_B94M_22.05.13_cm08
My friends here comes a new LeWaport (cmod08) based on the stable release for Amoi N828.
If your already on lewa simple make backup, install cmod08.zip, wipe dalvik and cache after install, all others look instructions below.
Known bugs: Wifi nvrambug, with my fix bluetooh is only working after factory reset or resore data.
Update 07.05.2013: LeWaport_Star_B94M_08.05.13_cm04
Dear friends of LeWa here is a Test version based on LeWa Amoi N828
This version is rooted with gapps, no need to load these.
Hints for install:
1. Boot to CWM or TWRP Recovery
2. Make backup including boot and recovery ( TWRP 2.5.0.0 will be installed )
3. Wipe System partition
4. Install LeWaport_Star_B94M_07.05.13_cm03.zip
6. Reboot and be happy
Known errors: some chinese apps and strings, noLED patch still needed
Further steps: bugfixing, try to port multilanguage support (don´t hesitate to help )
New logo needed
-------------------------------------------------------- Hints for 4.2.1 -------------------------------------------------------------------------------
Update 03.05.2013: Batterylive improvement
User slein has submitted selfcoded apk for LED Fix ! Thanks to him!!!!
There are a lot of activities to fix sporadical battery drain. Following APK seems to be workaround install the app and disable LED notification with widget. Thx to all testers!
Good Batterytool
Update 26.04.2013: Japanese 4.2.1 JB-image from needrom
Well running 4.2.1 from needrom
for most users, please read carefully instructions, do backup (Titanium and/or CWM/TWRP) before update
and make Factory reset as described, to avoid most problems!
Howto Root 4.2.1 and GPS-Fix by JBrandtner
---------------------------- Hints for 4.1.2. --------------------------------------------------------
Update 18.04.2013: Wifi Mac change Fix ( Thx to okupka )
- use these file (make backup before!!!) with this guide and you are done
Update 12.04.2013: Different Sound improvements
People who have problems with sound try this link from Zopo-Forum
or from Patchworkoftips
Update 11.04.2013: Data Resize partition to 2.74GB Detailed description from here
1. We backup with recovery.
2. Unloaded and 2.74GB decompressed data (Thx to spanish friends! ).
3. SP Open Flashtool and as we have done before installing the recovery in scatter-loading MT6589_Android_scatter_emmc.txt select the file in the folder where we unzipped 2.74GB Data
4. We ensure that only EBR1 and EBR2 are marked.
5. We Give to Download, accept the prompt, connect via USB the phone off the PC. As with the recovery if the process fails, disconnect the cable, remove and put the battery and repeat this step.
6. If all goes well, will back the green circle. Disconnect the phone from the PC.
7. Now we go back to recovery (Turn on the phone by holding the power key + volume +).
8. In the recovery do wipe data / factory reset.
9. Optionally if you want to restore the data and installed applications we advance restore, choose the backup you made ​​in step 1, and finally we give to Restore data.
10. Reboot from recovery. In this first boot after repartitioning we may see a notification saying the phone storage is damaged, then click in it. It will show a dialog box asking if you want to format the SD card, does not refer to the External SD but the phone's internal memory, so we do not fear clicking on Format. After doing the latter, voila, you have the Data partition (where apps are installed) extended to 2.74GB
Update 08.04.2013: 3G improvement
if phone is already root
Install from market the mobileuncle tools.
-> enter engineer mode (MTK).
-in modemtestactivity change "factory" for "telephone".
-in "band mode" GSM mode uncheck the "PCS1900."
New TWRP 2.4.4.0 Recovery available here
Update 03.04.2013: Networklocation Fix
by radekfor: i think i solved cell location problem.
Simply install latest Gapps for JB 4.1.2
Click to expand...
Click to collapse
http://goo.im/gapps/gapps-jb-20121011-signed.zip
-> boot to Recovery ( Mobileuncle Tools, or Quickboot,.... ) -> Install zip from SD-Card , ....
Update 28.03.2013: Working on JB 4.1.2
Here you go at your own risk
Drivers;
CWM 5504 and Root here;
German instruction here
New SP_Flash_Tool_v3.1304.0.119
After extracting the zip file:
1. Debug Mode in the Developer Tools Switch
2. Install the drivers ( others may work better, e.g. pdanet )
3. The superuser-313-arm-signed.zip from third copy to the external SD card
4. Phone off and take out battery
5. using the SPFTools load in directory 2. Scatterdatei -> load and Recovery.img, boot.img and flash (press download and then return battery back)
6. Disconnect the data cable after green OK
7. When switching power and Vol + hold when the Green Man comes release Power and Vol + hold on.
8. In CWM now make complete backup, after this install zip from SDcard install the superuser zip ... JB 4.2.1 may need other tools look here found by #90
9. skip step 7 +8 and install superuser using the MTKdroidtools and make backup (but it takes a relatively long time)
10. You can now delete with MTK Droidtool some China-apps."
PS: Backup Rom made with SPFtools->readback

Thanks for the alert.
I've got a quad core 6589 version, so far cannot find a way to root it..
And it's NetworkLocation.apk is missing, i tried a couple of NetworkLocation.apk from JellyBean gapps zip files, no one seems to work, either not installable, crash on boot or not working.
3G connection seems to be dodgy, H/H+ is shown on the top bar but data is not coming down normally, during 1 minute, only less than 100k data come down and not able to load even 1 page...
Anyone has the same problem?
Cheers,
Fish

star b943 (mtk6589 b94m)
could someone translate recovery menu from Chinese Language

Yes the baseband or antennas seems to be crap.
Start download and remove your hands from the device or take it only with two fingers on the upper side, then my downlads finish and downloads show normal values. Speedtest with upload is seems to be fine,...
If someone needs root or cwm write me pm, or give me public upload location I´m not so experienced with this,...
Best regards

Thanks for the advice

radekfor said:
could someone translate recovery menu from Chinese Language
Click to expand...
Click to collapse
Translate into:
-Factory Reset
-Auto (Overall?) Test
-Manual (Overall?) Test
-Single Function Test
-Test report
-Clear eMMC
-Version Info
-Reboot
Hope this helping.:laugh:

how do you think about the Star N9589?
with same quad core cpu mt6589

haisir said:
how do you think about the Star N9589?
with same quad core cpu mt6589
Click to expand...
Click to collapse
The MT6589 is really good stuff, for me its my personal Favorite , but I would prefer smaller devices with 4-4,7" max screensize.
5,5" and higher does not really fit in any shirt pocket. If I ever have to carry a bag for my phone I would prefer a tablet with much better screens and battery life.
So i´m looking forward to Jiayu G4, G5, UMI X1S, or something similar screensize

cmoegele said:
Update 28.03.2013:
Here you go at your own risk CWM 5504 and Root
Best regards
Click to expand...
Click to collapse
That's great!!!!
Thanks, it worked!
Now I still have two problems:
- amazon app-shop doesn't start (it remains black with amazon logo)
- doesn't vibrate on call in vibration mode
does someone else have the same problems?
Thanks

B94M/B943 quad
Thank you everyone for your hard work and time. I have very little experience (twice with well established models)
I was wondering if someone could clean up the txt instruction translation so someone like me can avoid brick making. Even adding better detail would be sweet. I will copy below. Thanks in advance.
"ATTENTION: The Star B94M is available as dual and quad core version!
The tools here refer exclusively to Star B94M MTK6589 or B943 quadcore devices!
After extracting the zip file:
1. Debug Mode in the Developer Tools Switch
2. Install the drivers
3. The superuser-313-arm-signed.zip from third copy to the external SD card
4. Phone off and take out battery
5. using the SPFTools load in directory 2. Scatterdatei -> load and Recovery.img, boot.img and flash (press download and then return battery back)
6. Disconnect the data cable after green OK
7. When switching power and Vol + hold when the Green Man comes release Power and Vol + hold on.
8. In CWM now either only make complete backup, or install zip from SDcard install the superuser zip ...
9. skip step 7 +8 and install superuser using the MTKdroidtools and make backup (but it takes a relatively long time)
10. You can now delete with MTK Droidtool some China-apps."

bradstallion said:
That's great!!!!
Thanks, it worked!
Now I still have two problems:
- amazon app-shop doesn't start (it remains black with amazon logo)
- doesn't vibrate on call in vibration mode
does someone else have the same problems?
Thanks
Click to expand...
Click to collapse
vibration problem was a wrong setting by my side... still have problems with amazon app-shop (very strange, I've it installed on many devices and different versions of android, jelly bean included)

angryfish99 said:
Thanks for the alert.
I've got a quad core 6589 version, so far cannot find a way to root it..
And it's NetworkLocation.apk is missing, i tried a couple of NetworkLocation.apk from JellyBean gapps zip files, no one seems to work, either not installable, crash on boot or not working.
3G connection seems to be dodgy, H/H+ is shown on the top bar but data is not coming down normally, during 1 minute, only less than 100k data come down and not able to load even 1 page...
Anyone has the same problem?
Cheers,
Fish
Click to expand...
Click to collapse
The MTK chipsets have always been weak on data connection starting from the MTK6573. It's so bad that connection can be lost while my Samsung right beside it has a good connection.
Anybody knows what is wrong with this China made phones?

Star
I managed to root. Thanks for the help guys (sarcasm).......The files that "cmoegele" posted worked except for the usb driver files. I had to use PdAnet for connection. I'll be watching to see what other members find on the camera focus and poor data comms.
Thank You

Data upload is stable, and downlad has good values for a while, but slows down from time to time. So I think the device is not doing completly wrong. There needs to be still some finetuning in Baseband and Rom like man other devices always need.
The performance and quality is really good, even +2 days Batter lifetime is a good value for this powerful device.
I´m waiting for new Roms

fmehrtens said:
I managed to root. Thanks for the help guys (sarcasm).......The files that "cmoegele" posted worked except for the usb driver files. I had to use PdAnet for connection. I'll be watching to see what other members find on the camera focus and poor data comms.
Thank You
Click to expand...
Click to collapse
Hi fmehrtens, may I know the RAM and ROM capacity of your phone model? I am wondering if 8GB ROM and 1GB RAM model can be rooted using same method, thanks.

Spec says 8GB ROM and 1GB RAM, however AnTuTu shows only 1GB ROM and 1GB RAM. Am I missing anything here?

Hello,
I've ordered this new phone Star One B943 Quad core, and i want to thank u for the rooting method ^^
I'm searching for the ROM stock, does anyone have the idea where i can find it ?
And i found that the Miz Z1 is the same phone, but with Android 4.2.1 installed. Do u think it's possible to upgrade the Star OS version with the Miz Z1 firmware ?

B934
windwaver said:
Hi fmehrtens, may I know the RAM and ROM capacity of your phone model? I am wondering if 8GB ROM and 1GB RAM model can be rooted using same method, thanks.
Click to expand...
Click to collapse
It is a 4G ROM and 1G RAM. Just FYI, the first time I tried to root it did not root, I had to try it a couple of times, and then I also loaded the ZIP file on the ROM memory along with the SD card. It worked that time. Not sure if that's what helped or not. The phone is a really nice phone ecpecially after rooting. I am also having trouble with Amazon App store app, Netflix playing too slow and the camera focus.
Good Luck and Thanks!

Neodragon12 said:
Hello,
I've ordered this new phone Star One B943 Quad core, and i want to thank u for the rooting method ^^
I'm searching for the ROM stock, does anyone have the idea where i can find it ?
And i found that the Miz Z1 is the same phone, but with Android 4.2.1 installed. Do u think it's possible to upgrade the Star OS version with the Miz Z1 firmware ?
Click to expand...
Click to collapse
I have got a Copy of the origin Rom done with SPFTools. If it is needed. You also can use the Scatterfile from the zip-file.
Do you have a link for the 4.2.1 Miz Z1 firmware ? Perhaps its a fake,...
Otherwise I will flash it to our device except the Preloader, so if it fails I could go back to stock.

cmoegele said:
Data upload is stable, and downlad has good values for a while, but slows down from time to time. So I think the device is not doing completly wrong. There needs to be still some finetuning in Baseband and Rom like man other devices always need.
The performance and quality is really good, even +2 days Batter lifetime is a good value for this powerful device.
I´m waiting for new Roms
Click to expand...
Click to collapse
May I know the country you using the phone in? I have very bad experience with MTK chipsets with regards to data transfer. Other phones e.g. Samsung, LG do not give me this problem.
How to improve the data performance?

NuVision TM800A510L- General Info (Root, Recovery, Unbrick)

This thread intends to be a general thread for all things about the NuVision Tablet. The aim is to help other users of this tablet to be able to root their device, get a temporary recovery and to unbrick their device. I will add the guides for the following posts below in time. This would not have been possible without help from @andrei_kr.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Technical Specifications:
Display: 8-inch IPS HD capacitive touchscreen
Resolution: 1280 x 800
Operating System: Android 4.4 Kit Kat
Processor: Intel® Atom Processor
Memory: 1GB DDR
Storage: 16GB
Micro SD Card Slot: Yes, expandable up to 64GB
Camera - Rear: 2MP
Camera - Front: 2MP
Audio: 3.5mm stereo jack with microphone
Wireless: Wi-Fi 802.11 b/g/n
Bluetooth: Bluetooth 4.0
Battery Type: Rechargeable lithium-ion
Battery Life: 6+ hours; results will vary based on usage and settings
Port: Micro USB
Sensor(s): Accelerometer

Backup/Root/Recovery
DISCLAIMER:
Rooting your phone and using custom Recoveries and ROM's have risks and may result in bricking your device, and has nothing to do with Google or the device manufacturers. In case of any mishap I am not responsible if you brick/ruin your phone in any way.
Basic computer skills are required and minimal knowledge about the phone and phone utilities also.
Make sure that whatever you do, you are doing it at your own responsibility.
How to backup of your stock ROM, install CWM and Root your device.
Requirements
ADB/Fastboot Drivers
Intel Android USB Drivers
SDcard (8GB of higher)
Temp recovery script
SuperSU
Steps
Download and unpack IntelAndroid-FBRL-07-24-2015.7z
Power off tab.
Hold Vol+ and press Power on the tab 5-10 seconds
You can see logo about 10 sec and after that DROIDBOOT will load
Connect USB cable to PC
Run launch.bat from IntelAndroid-FBRL-07-24-2015 folder
Type ACCEPT and press Enter
Type 5 and ENTER (cwm.zip)
Type T3 and ENTER (or T4)
CWM will load after 10 sec.
Select backup to external sd card.
After the backup is complete, copy it to the PC to ensure it's safe.
Follow steps 1-10 again and go to install zip from sdcard or external and select the SuperSU zip file and flash it.
NOTE: DO NOT FLASH ANY ROMS WITH THIS RECOVERY IT IS ONLY TEMPORARY. I DID NOT TEST XPOSED SO BE CAREFUL.
Credits
@andrei_kr
@social-design-concepts
@vampirefo
@Chainfire

Unbrick your Tab!
To unbrick your device all you simply have to do is go back to the CWM and restore your backup that you created earlier. If you don't have one, here is a copy of a working backup ---> Google Drive. Credits to @andrei_kr, say thanks!

How to fix touch!
If you unbricked your tablet and your touch isn't working, there is no need to worry. @andrei_kr has provided a guide on how to fix that touchscreen. Credits to him.
NOTE: If your touch is working then do not try this, it will mess up your touch!!
You probably got this touchscreen issue by flashing a different kernel with incorrect drivers.
Now your configuration is likely to differ from the native. You can view the konifig in command prompt or in the terminal :
Code:
cat /proc/gt9xx_config
(only mtk) or using the gtp_tools apk (it is in the attached file below).
It starts with the byte sequence: 0x41 0x1C 0x02 0xC0 0x03
0x41 - 65 version
0x1C 0x02 - 540 horizontal resolution
0xC0 0x03 - 960 vertical resolution
Touch must somehow work to press the button, if there is support otg, then it's easier, you can connect a mouse.
1. Install the gtp_tools_v2.6_20140126_special.apk
2. Go to the option Firmware update. Click refresh, see IC Version: 913_1020 then touch GT913 firmware and 1020.
3. Go to the option Config Settings, press read, the data were considered. Under Normal Config we have:
65 version
540 horizontal resolution
960 vertical resolution
4. Click browse, select click browse to the native config.
5. Native configuration take from your device, in the same paragraph, press the save (saves the backup config file). Native configuration for Fly IQ446 in the attached file. Press send.
6. If nothing has changed, look at the version you have and native config. Then change the version of the file in the native config in your hex.
Example: 0x41 = 65 home, a stranger 0x49 = 73 => replace the 0x41 to 0x49.

Xposed does work
Make sure you're rooted and have a working backup.
Download and install Xposed but don't run yet.
Version name:
2.6.1
Release type:
Stable (low risk of bugs)
Download:
de.robv.android.xposed.installer_v32_de4f0d.apk (711.77 KB)
Number of downloads:
11,141,690 in total · 8,610 in the last 24 hours
MD5 checksum:
de4f0dc569f96dbcc5668d40fa76040b
Uploaded on:
Tuesday, May 20, 2014 - 21:59
Changes:
- Fixed a crash with some apps (Disa, Rdio)
- Some minor UI improvements
- A few translation updates
Now either use an android terminal emulator or ADB and run these commands
1. su
2. echo 148 > /data/data/de.robv.android.xposed.installer/conf/jit_reset_offset
3. chmod 664 /data/data/de.robv.android.xposed.installer/conf/jit_reset_offset
Now you can install the Xposed framework.

max0r4axor said:
Xposed does work
Make sure you're rooted and have a working backup.
Download and install Xposed but don't run yet.
Version name:
2.6.1
Release type:
Stable (low risk of bugs)
Download:
de.robv.android.xposed.installer_v32_de4f0d.apk .
Click to expand...
Click to collapse
Thanks for report.

First want to say much thanks for this thread, it was getting frustrating trying to find a solution.
I have encountered a slight issue trying to unstuck 2 of these devices.
neither have been rooted and are stock devices.
i cant seem to get cwm to locate the backup that you supplied.
do i need to copy it to the cwm backup folder on my sd card?

Jingbadguy said:
First want to say much thanks for this thread, it was getting frustrating trying to find a solution.
I have encountered a slight issue trying to unstuck 2 of these devices.
neither have been rooted and are stock devices.
i cant seem to get cwm to locate the backup that you supplied.
do i need to copy it to the cwm backup folder on my sd card?
Click to expand...
Click to collapse
Yes you do. Copy it to your sd card. Btw if your device is stock why do you want to restore this one?

kirito9 said:
Yes you do. Copy it to your sd card. Btw if your device is stock why do you want to restore this one?
Click to expand...
Click to collapse
both are stuck in bootloader.
i was assuming i could just just reflash...
cant find a stock copy anywhere...

Jingbadguy said:
both are stuck in bootloader.
i was assuming i could just just reflash...
cant find a stock copy anywhere...
Click to expand...
Click to collapse
Oh I thought they were working. Follow the procedure above to fix.

NuVision TM101A510L
Will this method work with the NuVison TM101A510L. It seems like a lot of work to do if I'm not sure about this model. Also I have a problem with this model overheating and crashing when I play Pixel Gun 3d and it's pissing me off. I just fired off a curse filled missive to NuVision support. They don't even list this model on their registration page and it seems they have no faith in this model. I will never buy this brand again, in fact I would recommend against it to my customers. I've used Azpen tablets with no problem rooting or playing Pixel Gun 3d. I took a chance and I'm so damned sorry I did.
;angry

Thank you so much for this thread!!! I have been looking for a recovery for a few months now and cant believe I didn't find this until now...

ok so a minor problem... I cant seem to flash the recovery... Not sure if ive placed the recovery file on my sd card properly or not cause i locate a few backup files none of which have any effect. I gave up in frustration untill now. ( Currrently working on a few androids one rooting one imea changing so figured id take a crack at these devices again. THe layer of dust on these things are getting a bit thick.)

williamglick said:
Will this method work with the NuVison TM101A510L. It seems like a lot of work to do if I'm not sure about this model. Also I have a problem with this model overheating and crashing when I play Pixel Gun 3d and it's pissing me off. I just fired off a curse filled missive to NuVision support. They don't even list this model on their registration page and it seems they have no faith in this model. I will never buy this brand again, in fact I would recommend against it to my customers. I've used Azpen tablets with no problem rooting or playing Pixel Gun 3d. I took a chance and I'm so damned sorry I did.
;angry
Click to expand...
Click to collapse
I think the models numbers are specific so I can't say for certain that this will work with your tab. Try the fastboot/rooting procedure first and then maybe you can just restore the system partition only not corrupting the boot/kernel.

Unidave199 said:
Thank you so much for this thread!!! I have been looking for a recovery for a few months now and cant believe I didn't find this until now...
Click to expand...
Click to collapse
You're welcome. I waited months also before finding a working backup.

Jingbadguy said:
ok so a minor problem... I cant seem to flash the recovery... Not sure if ive placed the recovery file on my sd card properly or not cause i locate a few backup files none of which have any effect. I gave up in frustration untill now. ( Currrently working on a few androids one rooting one imea changing so figured id take a crack at these devices again. THe layer of dust on these things are getting a bit thick.)
Click to expand...
Click to collapse
You are using the fastboot method correct? If the recovery script says finished as in no errors show on the screen then it could be the device itself. What do you see?

kirito9 said:
You are using the fastboot method correct? If the recovery script says finished as in no errors show on the screen then it could be the device itself. What do you see?
Click to expand...
Click to collapse
ill let you know just as soon as i can get back to working on those devices... im prety sure if memory serves correctly, that I was getting some errors regarding unable to mound sd or ext sd. I could be wrong but thats what comes to mind.
Im up to my neck in jobs on other devices. (rooting galaxy S5, changing imei on another S5, IMEI change on a LG Stylo 2 plus, Galaxy Tab 2 system issues need to diagnose, and several screen and lcd replacments)

STUCK
ok so i have a little time to work on these....
When i run the launch.bat and get to fastboot, it goes through the instalation and everything checks ok till the very end where it says failed cause too many links.
included the screenshot so you can see.
At this point im unsure if i just need to try flashing the supersu zip like it instructs but having tried befor it had no luck.
can I not just flash twrp on this thing then su like with most root methods?

after ive flashed super su, when i go to restor the working backup i see a list of backups... including yours but when i select it i always get :
checking md5 sums...
md5 mismatch!
what now?
(i tried just flashing the boot but even that comes back with same error)
I know on other devices the recovery is an img file any the one you provide is a rar... i extracted to my desktop and was gonna try flashing with abd/fastboot but since its not an img file, im thinking it wont work...
any thoughts?
Im still unsure how to flash the recovery that u supply in the section for fixing bootloop....

Jingbadguy said:
ok so i have a little time to work on these....
When i run the launch.bat and get to fastboot, it goes through the instalation and everything checks ok till the very end where it says failed cause too many links.
included the screenshot so you can see.
At this point im unsure if i just need to try flashing the supersu zip like it instructs but having tried befor it had no luck.
can I not just flash twrp on this thing then su like with most root methods?
Click to expand...
Click to collapse
The too many links error is common for this device. Touch doesn't work with TWRP on this device so CWM is out only go. You can root and using cwm like any other root method.

Info & links For mtcd & non mtc(Intel only)Need help to build TWRP RECOVERY !!!

Info & links For mtcd & non mtc(Intel only)Need help to build TWRP RECOVERY !!!
WE NOW HAVE ROOT
This unit works and sound great..However there are a few thing i would like to adjust...like be able to power off instead of hibernate and or set hibernation time...I would like to have back up of the shipped original rom... And dual boot os..or roms. Change buttons and switches on tool bar...Does anyone know if there is a way to dump mcu firmware....... All ideas and suggestions welcome and appreciated!! ...
Looking for help and insight into this head unit..1) lets make this rom better ..now that joying has released there intel unit i would like to get a copy of there rom and compare .... Also ANDROID 6 may be In the near future ....read links
thanks in advance
cpu info
intel link
https://software.intel.com/en-us/blo...ocessor-series
rockchip link same cpu
http://www.rock-chips.com/a/en/produ.../1125/734.html
on the intel link a little ways down the page it says
The Intel® Atom™ x3-C3230RK processor, a collaboration between Intel and Rockchip*, includes a quad-core 64-bit Intel® Atom™ CPU and an integrated 3G modem. Figure 3 describes this SKU’s high level architecture
http://www.intel.com/content/dam/www...3000-brief.pdf
cool link from dongali thanks
How to extract installed apps as apk guide:
http://www.wikihow.com/Extract-APK-File-of-Any-App-on-Your-Android-Phone
https://play.google.com/store/apps/details?id=com.ext.ui&hl=en
cool link from doitright thanks
WHAT CAN THIS MEAN FOR THE FUTURE OF THE INTEL HEAD UNIT
https://ami.com/board-support-packages/
It looks like we should be able to get some code and kernel for android 6.0..now we just need to find someone to build a roms for us
food for thought can we do something like this for our intel units ...this could open some doors for us
http://www.cnx-software.com/2014/12/...k3288-devices/
wasn't necessary thinking Linux ubuntu only...but if you made bootloader look for a system on a sd card android,linux,windows,exc...you could have a dual boot system....this would be awesome it would make it easier to mod system files and experiment with different os and have the ability to pop out the sd card and be back to stock config if you didn't want to boot off sd card make an sd card to redirect boot loader back to internal system...or if bootloader can't find a os on sd make it default back to internal system. ..I think something like this would be one of the best things that could help speed up development and allow roms that were built for different partition sizes and systems become more Universal .
Anyone want to chime in
Can this be done
Pic of unit i bought at bottom of post
firmware update link 10/12/16
https://drive.google.com/drive/folde...XM?usp=sharing
original firmware update version link
https://drive.google.com/file/d/0Bz8...ew?usp=sharing
the root udate.zip link is a few pages back in this thread i think around page 23 .. on a fresh formatted usb copy update.zip ..flash from usb1 . dont check wipe
root link for mtcd
https://drive.google.com/file/d/0B1PAxDuZk9rHODdwNzFMR3FtOEk/view?usp=sharing
link to joying fw
heres the link to fw
https://drive.google.com/drive/folders/0Bz8umNL1qrsoLVh5cHVSdmVQOWc?usp=sharing
ngochoangimsat said:
The head unit JOYING JY-UL135N2 with CPU Intel Atom Sofia come with new firmware structure (neither update.zip nor dupdate.img + dmcu.img like other Joying AMR headunit ). As you can see on this https://drive.google.com/drive/folders/0Bz8umNL1qrsoLVh5cHVSdmVQOWc
I add some file and script to 5009_20.zip to root firmware but the new firmware can't be pass the verify of upgrade screen.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Fig 1. Structure of JOYING- JY-UL135N2's firmware, these are all of the need files and directories, which we have to copy to root directory of USB Flash
Can you help us root this firmware ? https://drive.google.com/drive/folders/0Bz8umNL1qrsoLVh5cHVSdmVQOWc
Yes I have seen that that's why I wanted someone to use titanium backup on there unit and do a full backup or nandroid. Also .titanium I believe will generate a update.zip file that could be flashed...once this is done you could just do a standard restore with a titanium or nandroid backup. ....I have reached out to a few people about a multirom boot setup hopefully we can get that to work and boot and flash to sd cards....
Also remember some units are 16gb and others are 32gb so the partition tables will be different. .but that's nothing that can't mod to be fixed...another reason multirom flash to sd card would make life easier
this can be the answer if can this be done with our head unit.... http://www.xda-developers.com/install-use-multirom-xdatv/
This app only works on selected devices. Check the list at the bottom of this description.
This application requires root and it is designed to be used by experienced "power users".
It is strongly recommended to read XDA thread before installing this app, you can find links at the bottom of this description.
:fingers-crossed: can install or update MultiROM, it's recovery and kernels. It can also install Ubuntu Touch system-image based builds into MultiROM as a secondary ROM.
MultiROM is one-of-a-kind multi-boot mod for Android devices. It can boot any Android ROM as well as other systems like Ubuntu Touch. Besides booting from device's internal memory, MultiROM can boot from USB drive connected to the device via OTG cable. The main part of MultiROM is a boot manager, which appears every time your device starts and lets you choose ROM to boot. You can see how it looks on the left image below and in gallery. ROMs are installed and managed via modified TWRP recovery. You can use standard ZIP files to install secondary Android ROMs, daily prebuilt image files to install Ubuntu Touch and MultiROM even has its own installer system, which can be used to ship other Linux-based systems.
.Here's the deal... if we could dual boot another android os for head unit let just say rom from joying or other brand/manufacturer you could test rom see what works and what doesnt , modify rom ,extract apps from rom and if rom was better you could make rom you primary boot ..(i also believe we could add or mod the mcu part back in the rom).:fingers-crossed:... and you would be able to test this all with out erasing you stock configuration or stock rom ....you would be able to test and develop new updates as they come out.. you could test with out erasing or wiping your system.. you could run Ubuntu ,Ubuntu touch or other more pc based os and still have the ability to reboot and be back in radio os android mode....and I think there is a fun factor here with experimenting and adding more function to the head unit
This is what XDA is all about right!!! WHO 'S WITH ME:
Here we go build twrp for our units instructions
https://www.google.com/amp/www.xda-...for-your-device/amp/?client=ms-android-att-us
http://forum.xda-developers.com/showthread.php?t=1943625
Then add twrp manager
Click to expand...
Click to collapse

there are now at lease two types of intel units out there ones based off mtcd and non mtc ones on a totally new board...the firmware should be similar as for there both built for intel x86....developments that help one should be able to be applied to the other...the biggest thing that i think that would help both platforms would be the ability to dual boot these models so you could run experimental os fw os a sd card and still have the ability to go back to stock configuration simply by removing the sd card with the os on it or just telling the bootloader to boot the stock system img....thist is where i think we need to focus and develop.....

Joying JY-UL135N2 2G RAM 32G (Intel Sofia3g and STM8S207C8T6 MCU)
My unit:
Joying JY-UL135N2 2G RAM 32G (Intel Sofia3g, STM8S207C8T6 MCU, TDA7388)
This is not MTCD based unit. My MCU chip is STM8S207C8T6
I got following MCU Version: 2016-08-29 15:46:12 JY_(NOR)__90_C9_7706_5009_CAN(GX)_Newlap.
Purchased from here: Joying on Aliexpress
Photos of the unit outside
Photos of the unit inside
Original (non-modified) boot.img and recovery.img
Note that I have not verified the content, as I do not have sufficient knowledge. I was guided by gurus to extract these partitions from the unit just in case someone really needs them. I have not tested files personally.
https://drive.google.com/open?id=0B2DmzEjJljx3bFVudFpxNzNUS3c
Root instructions (credit to Spider84 for providing instructions and modifying boot.img):
https://drive.google.com/open?id=0B2DmzEjJljx3OXlQM2RFbWp4UWc
Method 1 (didn't work for me, as I could not figure out how to enter revovery):
1) Copy to USB thumb Drive
2) install from recovery
Method 2 (didn't work for me either):
1) Copy to USB thumb Drive
2) Go to Settings -> about device -> system updates
3) System should ask if you want to install update
Method 3 (worked for me):
1) you need to know how to connect and use adb. I connected using head IP address from laptop connected to the same wifi router. I did not use any additional apps or software (other than adb from android sdk). Hint: https://developer.android.com/studio/command-line/adb.html
2) extract su.img, SuperSu.apk and boot.img form the update.zip, place it on USB drive
3) use following commands:
cd /mnt/usb_storage3 (change path according to your USB drive)
cp su.img /data/su.img
cp SuperSu.apk /data/SuperSu.apk
dd if=boot.img of=/dev/block/mmcblk0p9
4) reboot

THIS IS A GREAT START THANK YOU
a system ROM zip for seller would be useful ...
.also please use apk extractor (updated instructions and link in first post)and back up all apps and system apps and upload that would be helpful.....
we need a full backup copy of total system try to make with nandroid backup or titanium backup you would need root to do this ..

I just got what you've been waiting for, the Joying upgrade file dated 10-31. I have the JY-UL135N2, just like StingerRUS above. I e-mailed Joying about the update shown in Boy ka's youtube, and they sent it to me here: https://mega.nz/#!iUECzLDB!oxXcP9Xa_jOeH3NTWoqwlPNzfYbeOHcJ_hP1NhvHCQs
I kept trying to ask them to show me how to root, as stated on their website root is supported, but they kept saying it's not recommended and would "make chaos for the unit". I tried Kingoroot, but that failed. Hope this file helps.

akuma148 said:
I just got what you've been waiting for, the Joying upgrade file dated 10-31. I have the JY-UL135N2, just like StingerRUS above. I e-mailed Joying about the update shown in Boy ka's youtube, and they sent it to me here: https://mega.nz/#!iUECzLDB!oxXcP9Xa_jOeH3NTWoqwlPNzfYbeOHcJ_hP1NhvHCQs
I kept trying to ask them to show me how to root, as stated on their website root is supported, but they kept saying it's not recommended and would "make chaos for the unit". I tried Kingoroot, but that failed. Hope this file helps.
Click to expand...
Click to collapse
thanks thats awsome downloading now and will add to google drive
heres the link to fw
https://drive.google.com/drive/folders/0Bz8umNL1qrsoLVh5cHVSdmVQOWc?usp=sharing

My mtcd intel unit is being tested prior to be sent
Enviado desde mi D6603 mediante Tapatalk

we need a a custom recovery with the ability to dual boot , install and boot os from sd card...

ikerg said:
My mtcd intel unit is being tested prior to be sent
Enviado desde mi D6603 mediante Tapatalk
Click to expand...
Click to collapse
The rear of your unit looks pretty interesting with those 2 antennas plus the wifi antenna to the right..(that's disconnected) Unless that's GPS ?
Do you have a link for it ?

The disconnected one is the gps antenna.... The other ones:
1) wifi
2) guy from HotAudio claims to be 3G antenna
Enviado desde mi D6603 mediante Tapatalk

this can be the answer if can this be done with our head unit.....http://www.xda-developers.com/install-use-multirom-xdatv/
This app only works on selected devices. Check the list at the bottom of this description.
This application requires root and it is designed to be used by experienced "power users".
It is strongly recommended to read XDA thread before installing this app, you can find links at the bottom of this description.
MultiROM Manager can install or update MultiROM, it's recovery and kernels. It can also install Ubuntu Touch system-image based builds into MultiROM as a secondary ROM.
MultiROM is one-of-a-kind multi-boot mod for Android devices. It can boot any Android ROM as well as other systems like Ubuntu Touch. Besides booting from device's internal memory, MultiROM can boot from USB drive connected to the device via OTG cable. The main part of MultiROM is a boot manager, which appears every time your device starts and lets you choose ROM to boot. You can see how it looks on the left image below and in gallery. ROMs are installed and managed via modified TWRP recovery. You can use standard ZIP files to install secondary Android ROMs, daily prebuilt image files to install Ubuntu Touch and MultiROM even has its own installer system, which can be used to ship other Linux-based systems.

Why do you want me multi OS on these units?
You will lose all the interaction with MCU, as it is programmed to interact to Android part.
Enviado desde mi D6603 mediante Tapatalk

ikerg said:
Why do you want me multi OS on these units?
You will lose all the interaction with MCU, as it is programmed to interact to Android part.
Enviado desde mi D6603 mediante Tapatalk
Click to expand...
Click to collapse
.Here's the deal... if we could dual boot another android os for head unit let just say rom from joying or other brand/manufacturer you could test rom see what works and what doesnt , modify rom ,extract apps from rom and if rom was better you could make rom you primary boot ..(i also believe we could add or mod the mcu part back in the rom):fingers-crossed:.... and you would be able to test this all with out erasing you stock configuration or stock rom ....you would be able to test and develop new updates as they come out.. you could test with out erasing or wiping your system.. you could run Ubuntu ,Ubuntu touch or other more pc based os and still have the ability to reboot and be back in radio os android mode....and I think there is a fun factor here with experimenting and adding more function to the head unit
This is what XDA is all about right WHO 'S WITH ME

Is there a Changelog for the 10-31 update file?

Never were available changelogs for updates on rk3188 and never will be on these....only our own feedback.
Enviado desde mi D6603 mediante Tapatalk

senator17x said:
Is there a Changelog for the 10-31 update file?
Click to expand...
Click to collapse
No log .......rom for intel joying

StingerRus do you use titanium back up and can you make a complete backup with it

[email protected] said:
WE NOW HAVE ROOT
This unit works and sound great..However there are a few thing i would like to adjust...like be able to power off instead of hibernate and or set hibernation time...I would like to have back up of the shipped original rom... And dual boot os..or roms. Change buttons and switches on tool bar...Does anyone know if there is a way to dump mcu firmware....... All ideas and suggestions welcome and appreciated!! ...
Looking for help and insight into this head unit..1) lets make this rom better ..now that joying has released there intel unit i would like to get a copy of there rom and compare .... Also ANDROID 6 may be In the near future ....read links
thanks in advance
cpu info
intel link
https://software.intel.com/en-us/blo...ocessor-series
rockchip link same cpu
http://www.rock-chips.com/a/en/produ.../1125/734.html
on the intel link a little ways down the page it says
The Intel® Atom™ x3-C3230RK processor, a collaboration between Intel and Rockchip*, includes a quad-core 64-bit Intel® Atom™ CPU and an integrated 3G modem. Figure 3 describes this SKU’s high level architecture
http://www.intel.com/content/dam/www...3000-brief.pdf
cool link from dongali thanks
How to extract installed apps as apk guide:
http://www.wikihow.com/Extract-APK-File-of-Any-App-on-Your-Android-Phone
https://play.google.com/store/apps/details?id=com.ext.ui&hl=en
cool link from doitright thanks
WHAT CAN THIS MEAN FOR THE FUTURE OF THE INTEL HEAD UNIT
https://ami.com/board-support-packages/
It looks like we should be able to get some code and kernel for android 6.0..now we just need to find someone to build a roms for us
food for thought can we do something like this for our intel units ...this could open some doors for us
http://www.cnx-software.com/2014/12/...k3288-devices/
wasn't necessary thinking Linux ubuntu only...but if you made bootloader look for a system on a sd card android,linux,windows,exc...you could have a dual boot system....this would be awesome it would make it easier to mod system files and experiment with different os and have the ability to pop out the sd card and be back to stock config if you didn't want to boot off sd card make an sd card to redirect boot loader back to internal system...or if bootloader can't find a os on sd make it default back to internal system. ..I think something like this would be one of the best things that could help speed up development and allow roms that were built for different partition sizes and systems become more Universal .
Anyone want to chime in
Can this be done
where unit was bought
http://www.aliexpress.com/item/2G-Ra...08.0.54.PW30db
firmware update link 10/12/16
https://drive.google.com/drive/folde...XM?usp=sharing
original firmware update version link
https://drive.google.com/file/d/0Bz8...ew?usp=sharing
the root udate.zip link is a few pages back in this thread i think around page 23 .. on a fresh formatted usb copy update.zip ..flash from usb1 . dont check wipe
root link for mtcd
http://forum.xda-developers.com/atta...4&d=1476629974
link to joying fw
heres the link to fw
https://drive.google.com/drive/folders/0Bz8umNL1qrsoLVh5cHVSdmVQOWc?usp=sharing
this can be the answer if can this be done with our head unit.....http://www.xda-developers.com/instal...ultirom-xdatv/
This app only works on selected devices. Check the list at the bottom of this description.
This application requires root and it is designed to be used by experienced "power users".
It is strongly recommended to read XDA thread before installing this app, you can find links at the bottom of this description.
MultiROM Manager can install or update MultiROM, it's recovery and kernels. It can also install Ubuntu Touch system-image based builds into MultiROM as a secondary ROM.
MultiROM is one-of-a-kind multi-boot mod for Android devices. It can boot any Android ROM as well as other systems like Ubuntu Touch. Besides booting from device's internal memory, MultiROM can boot from USB drive connected to the device via OTG cable. The main part of MultiROM is a boot manager, which appears every time your device starts and lets you choose ROM to boot. You can see how it looks on the left image below and in gallery. ROMs are installed and managed via modified TWRP recovery. You can use standard ZIP files to install secondary Android ROMs, daily prebuilt image files to install Ubuntu Touch and MultiROM even has its own installer system, which can be used to ship other Linux-based systems.
.Here's the deal... if we could dual boot another android os for head unit let just say rom from joying or other brand/manufacturer you could test rom see what works and what doesnt , modify rom ,extract apps from rom and if rom was better you could make rom you primary boot ..(i also believe we could add or mod the mcu part back in the rom).:fingers-crossed:... and you would be able to test this all with out erasing you stock configuration or stock rom ....you would be able to test and develop new updates as they come out.. you could test with out erasing or wiping your system.. you could run Ubuntu ,Ubuntu touch or other more pc based os and still have the ability to reboot and be back in radio os android mode....and I think there is a fun factor here with experimenting and adding more function to the head unit
This is what XDA is all about right!!! WHO 'S WITH ME:
Click to expand...
Click to collapse
Please tell me how to enter recovery mode for this head unit.
I did some method but all of them cant help me to enter recovery mode

[email protected] said:
No log .......rom for intel joying
Click to expand...
Click to collapse
Understood. I have the Intel based JY-UL135N2 already.
Just wondering what was updated. Was hoping for some Bluetooth bug fixed for OBD2 devices.

ngochoangimsat said:
Please tell me how to enter recovery mode for this head unit.
I did some method but all of them cant help me to enter recovery mode
Click to expand...
Click to collapse
Press reset and immediately after hold back button till lights flash then release count 2 second and press back again