I just want to update my Qtek S200 to WM 6.1. But mixed, and took the files to the wizard WM6.1_Wizard_Professional_Rus_PolarLights_AKU_1.1 . Handset didn't power up normaly. Then I unlock cid and flash it with RUU_Wizard_1050402_101_11210_O2_ENG_Rus_CID_Button.exe
After that I got completely dead's phone. Clicking on the power button and blinks display and red and blue indicators, the phone is not power up, and not connect to PC. But powered up and works with the power supply.
Befor update was:
IPL 2.09
SPL 2.20.0000
OS 2.20.7.38
After update and unlocking cid:
IPL 1.01
SPL 1.01
Is any solution?
Anyone, help me!
if you want to download this rom , you got to look for it ! it make a long time it's avaible.
take kayser's rom
I update my IPL to 2.18 with ruu_JAMin_213923_2139122_022021_noskype_wwe_ship.exe soft, but handset don't work, don't power up. May be I erased the calibration data?
read pls
read pls...
http://forum.xda-developers.com/showthread.php?t=315016
hope this helps
Related
Quote:
Originally Posted by jackass00
Use this rom "NB_Up_nghianga.rar" from this link.
ftp://ftp.xda-developers.com/Uploads.../Prophet-roms/
ActiveSync(4.5)must be open.
Duble click and run this"UPGRADE_ROM.bat"
And wait..initilaze.and wait.14 minutes.
And working stabile.Opening green new wm6 logo.
i installed this version on my qtek s200 and after installation it said hard reset your phone i did it, Now my phone starts showing a white screen but nothing else is working, Active sync 4.5 detects the device but it never connects.....
HELP ME !!!
Notes IPL: 2.09
SPL: 2.09.0000
GSM: 02.47.21
OS 10.1.0.811
crazy_luv said:
Quote:
Originally Posted by jackass00
Use this rom "NB_Up_nghianga.rar" from this link.
ftp://ftp.xda-developers.com/Uploads.../Prophet-roms/
ActiveSync(4.5)must be open.
Duble click and run this"UPGRADE_ROM.bat"
And wait..initilaze.and wait.14 minutes.
And working stabile.Opening green new wm6 logo.
i installed this version on my qtek s200 and after installation it said hard reset your phone i did it, Now my phone starts showing a white screen but nothing else is working, Active sync 4.5 detects the device but it never connects.....
HELP ME !!!
Notes IPL: 2.09
SPL: 2.09.0000
GSM: 02.47.21
OS 10.1.0.811
Click to expand...
Click to collapse
Downgrade to another version and then try again!
Just had same nasty esperience about an hour ago. Active syc not working ect.
Resolved by:
pressing together photo and on buttoms then reset underneath; that is both upper buttons on each side at the same time then reset underneath.
This takes you into the bootload mode. Active syc must be on then flush with an original Rom (NOT DOS!)
Forgot! in bootload mode, you screen will be red-green ect.
Just read this from another trend. The important thing is to get into bootload mode.
<<<<<<<<<<<<<<<<<<<<<<<<<
Start your device in bootloader mode (hold the comm manager button for about 5 secs while pressing the reset) and then run the upgrade again.
While in bootloader the screen will show three colours. Once in bootloader the device will connect to the PC.
rasanansa said:
Just read this from another trend. The important thing is to get into bootload mode.
<<<<<<<<<<<<<<<<<<<<<<<<<
Start your device in bootloader mode (hold the comm manager button for about 5 secs while pressing the reset) and then run the upgrade again.
While in bootloader the screen will show three colours. Once in bootloader the device will connect to the PC.
Click to expand...
Click to collapse
this guy is right, i did the same but i had to find an original rom for my device with NO VENDOR ID REQUEST, i already found a loader in french... i changed the attacheck nk.nbf file with the english one.. and loaded it to my Phone and it worked fine
Thanks to everyone now i have my phone back
i make all the ways but still cant enter bootloader mode jamin spl 2.20.0001
ipl 2.13.0001
please help me my phone is dead
have you tried this?
Not even a hold camera process works
Hi,
I had the same problem (device won't turn on when pressing camera+soft reset), what I did is remove the storage card, then tried again (soft-reset+camera) and boot loader screen appeared
Maybe that will work for you
Works
Hey thanks alot gerard lambert, I tried this and it worked!
I have a Jamin Running WM6 OS 4.0.0.4. I tried to change the OS but somehow it got corrupted. Now its going to the blue screen showing
IPL 2.13.0001
SPL 2.13.0001
GSM 02.07.20
OS 4.0.0.0
and then it halts. I habe tried everything to take it into Bootloader mode but its not going to the Bootloader mode. I connected it to the charger, pressed the Camera Button, soft reset it holding the camera button but its not going anywhere, it just goes blank then i have to take out the battery and put it again. Maximum it goes to the black screen with white test asking just to format. I want to take it to the Bootloader colored screen so that i can connect it to USB and install the OS again. I have tried everything but its not going to bootloader colored screen. Please help.
Hello:
As usual I tried to do some upgrades and getting stuck on the "DOPOD Enjoy Mobility" screen. The 818 Pro does not want to shut down or connect to the PC. When I try to run a good ROM - RUU_Prophet_220734_2207114_024721_NVID.exe, I get "ERROR [260] : UPDATE ERROR".
I tried to reset pressing the Comm Manager + Power button + Green Phone button nothing happens.
I tried to reset by holding Camera Button + COMM Manager + stylus in the reset" and hold it for 30 seconds it goes blank and then the HTC screen comes up and then leads to screen that displays below:
IPL 2.15.0001
SPL 2.15.0001
GSM 02.19.21
OS 6.6.6.666
DOPOD
Enjoy Mobility
Any assistance to get me going is again is really appreciated. Please help.. no phone now....
Brenda
Got it to reset to Bootmode...had to recharge battery
Hi All,
After lot of frustration, pulled the battery and put it back, did not restart the dopod instead plugged it in to recharger and went to bed... this morning with a fully charged battery pressed the camera button and the Power button simultaneously.... got me in to the tri-color screen.... made me so happy...
Flashed with PDA Viet ROM and got it up and running just in time to go to work.... Thanks folks..
Brenda
Hope that hasnt put you off flashing haha, wot rom you gonna try?
PDA Viet ROM
Hi Brenda,
I also facing the same problem in my 818 model (showing tri-color).
Please let me know, how to resolve the problem?
From where to download the firmware, and how to update the flash.
Thanks
C.Mohane
Brenda_Sheldon said:
Hi All,
After lot of frustration, pulled the battery and put it back, did not restart the dopod instead plugged it in to recharger and went to bed... this morning with a fully charged battery pressed the camera button and the Power button simultaneously.... got me in to the tri-color screen.... made me so happy...
Flashed with PDA Viet ROM and got it up and running just in time to go to work.... Thanks folks..
Brenda
Click to expand...
Click to collapse
I have a sitronics smartphone its the same as the imate spl. I installed wm6.1 but i can't install t9 on it so i tried to downgrade but when i try to a white screen comes up when i press 6 and power button.