WHAT can i do to get it back to nomal. i backed up my g1 but it keeps going to fastboot screen. i just want it back to normal or factory. PLEASE HELP ME!!!
What is the device? Have you installed anything non-stock to it (i.e. modified firmware)? Have you tried writing a fresh system image? Have you verified that you don't have any stuck buttons (back button, camera button)?
the camera button being stuck could be it
try to turn on ur phoen with the back case off
if you have isntalled any CF then reinstall those through the recovery menu...
i installed cupcake and well i didnt like it so i tried to reinstall my backup. but for some reason it doesnt let me. also i tryied nandroid v2 but when i write the files it says failed
what are the steps that you are taking?
write them out so if i or someone else notices a problem we can address it
be detailed
Related
--------------------------------------------------------------------------------
Can someone please help?
My wizard start-up doesn't go past the blackdiamond loading screen anymore. Kept getting the 'cannot execute files' errors so I decided to reset. Did soft reset a few times but still getting those errors so I proceeded to do a hard reset. After that, this happened. Reset a few times but still couldn't load.
I can't flash any ROM without ActiveSync now. Anything I can do?
Okay, can finally get back in with hard reset.
Can't seem to get rid of those errors though. Anyone knows how?
Thanks.
I suggest to reflash it with another ROM
Boot your Wizard to the bootloader screen (hold camera button and power on button), connect to you PC and run RUU flasher of another ROM... should work
Hey folks,
I could desperately use some help here...
I rooted my Droid Incredible using UnRevoked, which was painless and easy. After that, I downloaded Rom Manager, then backed up my current Rom.
Then I downloaded Titanium, and backed up all apps and system data.
Using Rom Manager, I downloaded Cyanogen mod 7.0.2, checked google apps, DID NOT check wipe data or cache, and then clicked OK to let it work it's magic.
The system turned on and off a bit, and then the CyanogenMod boot screen came on, ran the arrow around the droidbot a few times, then the droidbot dissapeared, came back across the screen, and the arrow resumed circling. This happened about 20 times, before I gave up and powered off by removing the battery.
Then I loaded Hboot, and attempted to access items in Clockworkmod, but even though I could click on an item, it would show the top hat with no change in status for many minutes. I eventually tried almost all options.
My Hboot screen shows:
HBOOT - 0.92.0000
Radio- 2.15.00.07.28
I am unable to click on Fastboot, Recovery leads me to busted Clockwork menu, Clear Storage causes restart into looped Cyanogen Mod screen, haven't tried Simlock, and Factory Reset also goes to broken Clockwork Menu.
I downloaded the RUU file from Doug, changed the title as directed, and put it on the SD Card. It gave me the option to Update, which when restarted afterwards continued to loop in Cyanogen Mod screen. Or, if I went to Clockwork Mod screen, the font was now Green instead of Orange. Also, when I click an item in the Clockwork Mod menu, it simply goes to a black screen until I hit the power button to bring me back to the menu,
I'd love to just get the phone to a factory state, so I can possibly use it for it's purpose of calling and sexting (just kidding.)
Please help, any advice would be greatly appreciated.
Oftentimes, ClockworkMod Recovery has an error at the bottom stating:
E:Invalid command argument
I have to go to bed for a bit, but will be back on around 10:30am EST. Thanks for any and all help!
In ClockworkMod, I can now access and start an operation by selecting it with the volume buttons, and then hitting the joystick button. This wasn't working previously. So, I've tried some of the obvious options such as Factory Reset but it's not doing anything. I've tried multiple solutions, which means I've probably messed it up on many levels. Is there any way I can just start from scratch or get a system restore done?
After utilizing that update from Doug, and then going into Clockwork Mod, clearing all caches and system data, and then trying to restore to a previous flash for the 7th time... I think it might be working!
Thanks to anyone who looked at this.
My friend has a Captivate. He lost all his google apps, android market, gmail, etc. He flashed gapps.zip from his recovery and now his phone is not working right. When he flashed a new rom to his phone, and it brought up the welcome screen it shows it for about 2 seconds and then reboots. He is also almost unable to access the recovery becuase of this, but even when he finally was able to access it and wipe everything, dalvik, cache, data/system, it still has issues. Nothing is fixing the issues from the gapps.zip. He was wondering if there is a way to wipe his entire phone from a update.zip file. Any help would be appreciated. Thank you in advance.
Please note that even when he wipes everything in recovery and flashes a new ROM, it still reboot on the welcome screen and he is unable to resolve this issue.
Ok, so he has now wiped all cache and system files, now instead of showing teh galaxy S logo with the cyanogen logo underneath, it shows just the AT&T screen, but it will not go any furhter, it just sits there. He says that because he is now unable toget into android he cannot access the recovery and the volume up/down is not responding. Is his phone Bricked?
Have you used Odin 1-click to revert back to stock?
had my friend use the Odin 1 click and he said it still did not work. He cannot get the volume up/down trick to work, when before all this it worked just fine. I am going to guess that the only thing he could try is the jig method. He swaers that Odin3 is not doing anything
Hello, I went through Rom Manager to upgrade to the latest CM, I opted to clear the dalvik-cache, and clear data but didn't back up (I have other backups). It started going through the process, then the phone seemed to reset as if it was done installing and rebooted, It hung there for a long time (15+minutes), then the screen went blank, no lights/no response. I tried to restart the phone, it now stays at the google screen, so I tried going into recovery to flash a previous back up, IT WONT LET ME, the screen just goes blank and the lights at the bottom go on. When I go into fastboot mode it tells me my phone is locked again! And when I try and access fastboot through my pc it wont even read the device..Please help me..factory reset, I don't care..someone please help, what can I do?
Did you have fastboot working on that PC before? I.e. are you sure you have sdk/drivers correctly installed?
Sent from my Nexus S using XDA App
I am really not sure what happened to the phone but I will tell all I did that might have connection to the current sitiuation.
I rooted the phone a while back , no issues with root.
As internal memory is low on this phone (4 gbs) I used link2SD.I have used in past with other phones never had a issue but this time the apps which were linked magically disappeared and some wont start saying " Application has stopped working " , So I decided to , oh wait I forgot I also had TWRP custom recovery on this phone too , no issues happened with it either, yet. So I decided to restore to a backup I made with TWRP a few days ago, I have previously done this thing and it worked perfectly unlike this time.I booted to recovery then restored to that backup but when I booted back the device wouldn't start! All it was showing was the boot screen(circles moving in weird pattern) I waited around 3 hours then I decided to factory reset , I took out the battery (BAM I did a mistake here I guess) went to recovery did a normal factory reset then again I was at the boot screen looking at circles This time I gave a around 10 hours but it still didnt load up , then I took out the battery again next what I see it when I try to start my phone NOTHING WILL HAPPEN only screen turns on for like few miliseconds showing only back screen (NO KARBON LOGO OR ANYTHING) and goes off again. I tried pressing Vol Up and choose recovery mode but it wont let me go in recovery it turns off again as soon I choose okay (RECOVERY DONT LOAD AT ALL NOT EVEN THE LOGO). Please explain what happened to phone and how can I fix it. :crying: :crying: :crying: :crying:
Go To Karbonn Care
I think I told you its rooted and stuff, which voids warrenty
Same thing happed to me with my sparkle v and now its not even receiving stock firmware via sp flash tool
Flash stock firmware by removing the battery
DeepSahota said:
Go To Karbonn Care
Click to expand...
Click to collapse
Hey can you please help me.I have karbon sparkle v.everything is on stock.after marshmello ota updates the phone was little bit unstable .many google apps were getting fc. Recently in decided to factory reset my device.after factory reset I can't get past the "checking connection" screen that we get after factory reset. There is no option to skip that to as usually it is available in other devices and ROMs.can u please tell me how can I fix this.can I flash stock 5.1 via stock recovery ?or maybe 6.0.1 again? I can't bypass the screen so I cannot switch on USB debuinging else everything would have been OK ?.please suggest something