Hi everyone
I am a fresh owner of a C600 and I want to back-up the original ROM (reasons are rather obvious). So:
1 - De-certificated (with RegeditSTG) and unlocked (SPV-Services) the phone
2 - Inserted a blank 32Mo SD-Card in slot
3 - Powered the phone to bootloader (IPL 1.00, SPL 1.00.0009)
4 - Turned off ActiveSync
5 - inserted the USB Cable (on phone appears USB on bottom)
6 - Started Tera Term
7 - sent r2sd all to phone
but in Tera Term window appears:
***** user area size = 0x1D30000 Bytes
R2SDBackup() - Download type = 6
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
I tried to set CID to 11111111 with SPV Services but it says:
'Illegal writezone patch attempt - invalid data'
Can you help me? Is there any other way to make a backup of the original ROM? Thanks in advance.
Any luck in re-flashing your device?
I think your stuck with editing the registry like many of us who flashed to the latest Orange AKU2.0 ROM
If there is a solution please let me know
Can I unlock my Charmer to have more memory (EXT_ROM) i unlocked ext_rom but it is only 7MB capacity, can i have more space in extended rom?
Charmer (black face) and big storage are not related. First of all, identify your phone, be sure that it is not a Magician (silver face).
7MB for the Ext Rom is about right, you can't do much about it.
my phone is: (PL ERA) MDA COMPACT II.
My second problem : I can't backup ROM to a SD card:
Code:
Cmd>r2sd all
***** user area size = 0x77E0000 Bytes
R2SDBackup() - Download type = 6
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
Cmd>
I unlocked SIMLOCK (other card works) but bootloader looks locked, is there any solution for this?
cid unlock?
i tried unlock with awizard and nothing help.
Code:
...
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred
result=80072746
[11:47:10,82] Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
cid may be locked... :/
how i can unlock cid, and solve this error?
----
And 7MB is everything?? no more can unlock?
I try to flash my vodafone PDA 1615 (tytn II vodafone ITA), but the HardSPL dont install correctly.
When I on my PDA boot the boot loader standard 3 colors (whitout unlock CID).
I try to flash the original WWE HTC rom, but the flash program dont work whit my Tytn vodafone.
I try the mtty program but the PDA freeze on splash screen vodafon whit the radio and os version number on low-right of the screen.(the mtty freeze whit this text:
Cmd>boot
InitDisplay: Display_Chip=1
Fill RSVD information for block 288 to 309
Storage start sector=0x78C0, total sector=0x13A00
Storage start block=504, total block=1256
Total Bad Block in CE: 0
Erase physical block from 792 to 2032
si backup: Erase physical block from 2032 to 2048
No card inserted
OSSIPreLoad ++
I search the vodafone ship rom but I dont find
help me please
and sorry for my english
lucadeejay
I also tried to flash other vodafone rom recostructed (UK, German, Spanish and Italian) whitout luck.
I use the mtty for see my right and I the "FF".
the boot loader write on 3-colors screen:
KAIS130
SPL-1.56.0000
CPLD-8
the command in mtty:
set 14 0
task 8
reset the device but load the bootloader
thx
luca
i`ve got a TORNADO and i wanted to flash it with wm6, just that i haven`t super cid it...
now i`m looking at a tri-coloured screen :
Tornado
IPL 1.00
SPL 1.0.0009
Tornado UI
when i connect it to the pc, it displays usb in the left down corner
terraterm works, it reads info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0x3B880000 Bytes
HTCSORG_0409 ‘©öIHTCE
but it doesn`t want to format BINFS
Cmd>format binfs
Not allow operation!
i`ve tried to flash from my sd-card .. but it doen`t work... even if i rename the flash..
found this great walkthrough... http://karhoe.net/content/view/21/1/#step8
but i really can`t find a solution for my problem
any ideas?
You have to make your Tornado SiperCID as Karhoe's walkthrough and preferably update your IPL & SPL. Maybe update Radio too....
i can`t make the super cid for the boot mode..
help..
also i`ve got another tornado, same spv c500 with the same cid code ..
but i cant save the flash with r2sd all command in ttermpro ..
r2sd all
***** user area size = 0x3B880000 Bytes
R2SDBackup() - Download type = 6
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
...
i`ve done it using the help from http://forum.xda-developers.com/showthread.php?t=319588&page=2
use the image from ftp://ftp.xda-developers.com/Uploads...Updates/I-mate
i had exactaly same problem i reinstall windows mobile 5 then super cid
HELP!!!!
I can't flash back to the stock rom offered by HTC (europe)
I have a german HTC TOUCH PRO
tricolor Screen shows:
SPL-1.90.OliNex
MicroP-Raph (LED) v13
MicroP-Raph (Key) v5
PSOC-Raph STAGE_CVT v0x36
my rom installed: SHEP's rom
radio currently installed: 1.14.25.35 from here (2nd post)
My Device softresets itself after an unspecific time???
If it is connected to USB and boot up it resets after about 3-4 Minutes?
If I want to reflash the stock SPL ERROR 244 invalid device ID
EVEN IF I WANT TO FLASH THE STOCK ROM I DOWNLOADED @ HTC.com (with entering my device S/N)
HELP
I don't know what I can do? I can't flash any rom
Thanks alot for your help
dope0ne said:
HELP!!!!
I can't flash back to the stock rom offered by HTC (europe)
I have a german HTC TOUCH PRO
tricolor Screen shows:
SPL-1.90.OliNex
MicroP-Raph (LED) v13
MicroP-Raph (Key) v5
PSOC-Raph STAGE_CVT v0x36
my rom installed: SHEP's rom
radio currently installed: 1.14.25.35 from here (2nd post)
My Device softresets itself after an unspecific time???
If it is connected to USB and boot up it resets after about 3-4 Minutes?
If I want to reflash the stock SPL ERROR 244 invalid device ID
EVEN IF I WANT TO FLASH THE STOCK ROM I DOWNLOADED @ HTC.com (with entering my device S/N)
HELP
I don't know what I can do? I can't flash any rom
Thanks alot for your help
Click to expand...
Click to collapse
Put the ROM on the SD Card and try flashing from there:
4. DOWNLOAD AND FLASH YOUR PREFERED ROM.
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 using a PC (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Raphael Rom Develpoment Page and unzip/unrar it to your computer
3. Goto the Roms Folder and rename the .nbh file to RAPHIMG.nbh
4. Copy the RAPHIMG.nbh file to the root of your microSD Card
5. Remove Sim Card and Restart phone
6. Plug the microSD Card into the phone
7. Press and hold the volume down button, then press the reset button with the stylus. Release the volume down button when bootloader tricolour screen appears
8. Follow the onscreen instructions to start flashing
9. Once phone finishes flashing and says Update Complete, reset with the stylus
10. When it gets to the screen where it configures the stylus, HARD RESET
(hold the VOLUME DOWN and ENTER (center) Buttons, press the RESET button with the stylus tip, then release the RESET button but continue to hold the VOLUME DOWN and ENTER buttons until the reset screen appears)
11. Follow onscreen instructions to set up your New Rom
taken from http://forum.xda-developers.com/showthread.php?t=448008
doesn't work?
this doesn't seem to work...
If I do so the phone start triangle
the showing up
-----------
00085002
loading...
-----------
00085002
checking
-----------
without the minus ( should show that this are different screens)
after that it stasy in the triangle screen
showing SPL-1.90.OliNex
MicroP-Raph (LED) v13
MicroP-Raph (KEY) v5
PSOC-Raph STAGE_CVT v0x36
serial
but nothing happens.....
tested it with original htc rom ENERGY 3.0 rom
stock radio rom (RUU_Raphael_Radio_Raphael_52.58.25.30_1.11.25.01_Ship)
still nothing happens
what can I do?
Maybee the phnoe id changed?
Could it be that the phone thinks that it is a diamond?
thank for your help
Did u try to hardspl once again ?
And whats written above the olinex part, something like raph110 ?
thx 4 help
yes i tried again from usb and microsd
still the same every flash aborts after 1-5 % and in the usb (windows flashing) it shows error 244 invalid ...
that starts to **** me up ...
tomorrow there arrives my new BT headset...
the installed rom starts but I can't flash any other rom????
WTF
above the the olinex part stands nothing
i wrote it down like it is shown on the screen
that confuses me too....
but thanks alot
Looking forward to get this phone working proper again
If someone can help i would be happy and even spend 50 €uros
I damn love my raphael... but by now it's unseless
when u do a softreset what does the phone show in the lower r/h corner ?
Did u try to do a hardreset ?
And what does the phone identify when u look at the system page of windows mobile
In the device information part
thanks to you
Softreset
lower right:
R 1.14.25.35
G 52.64c.25.35
D 5.11.502.2
lower left:
U
hardreset performs well but still no other rom flashable
softreset the same
DEVICE ID:
HTC_P4600
ROM version: 5.11.502.2 WWE
ROM date: 06/05/09
Radio version: 1.14.25.35
Protocol version: 52.64c.25.35U
thx for you patitience
Ok, the only solution what I found is this
http://forum.xda-developers.com/showthread.php?t=311909
tool to alter the ID of ur rom and than flash it to your device.
The Problem is I dunno yet how u could find the momentarly ID of your device. There is nothing shown at the 3color screen.
If I find some help or instruction will let u know.
I by my sle f found NBH Util ... I wil try to blank out the DEVICE ID or set it to * maybe it will work...
thanks so far
anybody els having an idea?
is it helping if the device is unlocked?
An if doen the olipro tool realy unlock my device?
Doens't work with * or blanking out
dope0ne said:
Softreset
lower right:
R 1.14.25.35
G 52.64c.25.35
D 5.11.502.2
lower left:
U
hardreset performs well but still no other rom flashable
softreset the same
DEVICE ID:
HTC_P4600
ROM version: 5.11.502.2 WWE
ROM date: 06/05/09
Radio version: 1.15.25.35
Protocol version: 52.64c.25.35U
thx for you patitience
Click to expand...
Click to collapse
Just saw that the Radio Version from ur Softreset Screen and the System Info differs. 1.14.25.35 to 1.15.25.35 Just a written down mistake I think ?
Yes it is only an error in writing...
MTTY
I found out about mtty
not bad that tool...
Here is what I got
I blanked out the checksum
LOGFILE:
Cmd>info 2
HTCSHTC__102****HTCE
Cmd>info 3
HTCS
Cmd>info 4
HTCSHTC__102****HTCE
Cmd>info 5
Cmd>info 6
HTCST ****HTCE
Cmd>info 7
Cmd>task 32
No card inserted
Level = 0
Cmd>info 2
HTCSSuperCID****HTCE
Cmd>info 3
HTCS
Cmd>info 4
HTCSSuperCID****HTCE
Cmd>info 5
Cmd>info 6
HTCST ****HTCE
Cmd>info 7
Cmd>
Is there a way to find out the model ID via mtty?
infopage I found so far MTTY Commands
NBH UTIL 4 Raphael (change ROM Infos)
PLS somebody help
If i read the log it looks like the bootloader is corrupted ...
and after task 32 it changes the cid to SUPERCID ???
why not befor?
hope that helps to help
THAT
Cmd>info 2
HTCSHTC__102****HTCE
Cmd>info 3
HTCS
Cmd>info 4
HTCSHTC__102****HTCE
Cmd>info 5
is ur Problem, ur Device ID is from a HTC ELF.
If u change the ID from the Rom before flashing, to this HTC__102
it should work.
Not shure but it seems logical, maybe someone can check this information from me.
Still I am worried how this id entered ur phone
Cmd>info 8
--- 2K bytes sector version ---
DEVICE NAME=samsung_kby00n00hm
DEVICE ID=0xBC
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x1000
BLOCK PAGE=0x40
Checking block information
BLOCK 0 (0x0) is reversed block
BLOCK 1 (0x1) is reversed block
BLOCK 2 (0x2) is reversed block
BLOCK 3 (0x3) is reversed block
BLOCK 4 (0x4) is reversed block
BLOCK 5 (0x5) is reversed block
BLOCK 7 (0x7) is reversed block
BLOCK 8 (0x8) is bad block
BLOCK 9 (0x9) is reversed block
BLOCK 10 (0xA) is reversed block
BLOCK 11 (0xB) is reversed block
BLOCK 12 (0xC) is reversed block
BLOCK 13 (0xD) is reversed block
BLOCK 14 (0xE) is reversed block
BLOCK 15 (0xF) is reversed block
BLOCK 16 (0x10) is reversed block
BLOCK 17 (0x11) is reversed block
BLOCK 18 (0x12) is reversed block
BLOCK 19 (0x13) is reversed block
BLOCK 20 (0x14) is reversed block
BLOCK 21 (0x15) is reversed block
BLOCK 22 (0x16) is reversed block
BLOCK 23 (0x17) is reversed block
BLOCK 24 (0x18) is reversed block
BLOCK 25 (0x19) is reversed block
BLOCK 26 (0x1A) is reversed block
BLOCK 27 (0x1B) is reversed block
BLOCK 32 (0x20) is reversed block
BLOCK 2588 (0xA1C) is bad block
BLOCK 2939 (0xB7B) is bad block
Partition[0], type=0x20, start=0x2, total=0x3E
Partition[1], type=0x23, start=0x40, total=0x800
Partition[2], type=0x25, start=0x840, total=0x11140
Partition[3], type=0x4, start=0x11980, total=0x28E40
CE Total Length(with sector info) = 0x8D4CC00
CE CheckSum Length(without sector info) = 0x8CC0000
maybe this is also helpfull?
the question is how to start a flash of the bootloader manually tothe correct sector ... ?
Seems like the bootloader is corrupter because of info 7 shows nothing exept a blank line so no model id?
Doesn't work because of the original image allready is set to HTC_102 ...
I tryed to change it in some other roms nothing worked...
everytime the same prob...
when entering getdevinfo it only showes a blank line?
WTF
think that there are no device infos on the PHONE ?!?!?!
I read about MTTY and the cmd "task 29"
to format but the Question is if I can reflash any rom after that...
Or if I will stuck at my Problem?
Hoping for a solution
thx to the comunity
schnitzelbrain said:
THAT
Cmd>info 2
HTCSHTC__102****HTCE
Cmd>info 3
HTCS
Cmd>info 4
HTCSHTC__102****HTCE
Cmd>info 5
is ur Problem, ur Device ID is from a HTC ELF.
If u change the ID from the Rom before flashing, to this HTC__102
it should work.
Not shure but it seems logical, maybe someone can check this information from me.
Still I am worried how this id entered ur phone
Click to expand...
Click to collapse
lol no HTC__102 has nothing to do with ELF.
and this is not deviceid or modelid, this is CID.