Hi everyone
I am a fresh owner of a C600 and I want to back-up the original ROM (reasons are rather obvious). So:
1 - De-certificated (with RegeditSTG) and unlocked (SPV-Services) the phone
2 - Inserted a blank 32Mo SD-Card in slot
3 - Powered the phone to bootloader (IPL 1.00, SPL 1.00.0009)
4 - Turned off ActiveSync
5 - inserted the USB Cable (on phone appears USB on bottom)
6 - Started Tera Term
7 - sent r2sd all to phone
but in Tera Term window appears:
***** user area size = 0x1D30000 Bytes
R2SDBackup() - Download type = 6
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
I tried to set CID to 11111111 with SPV Services but it says:
'Illegal writezone patch attempt - invalid data'
Can you help me? Is there any other way to make a backup of the original ROM? Thanks in advance.
Any luck in re-flashing your device?
I think your stuck with editing the registry like many of us who flashed to the latest Orange AKU2.0 ROM
If there is a solution please let me know
Can I unlock my Charmer to have more memory (EXT_ROM) i unlocked ext_rom but it is only 7MB capacity, can i have more space in extended rom?
Charmer (black face) and big storage are not related. First of all, identify your phone, be sure that it is not a Magician (silver face).
7MB for the Ext Rom is about right, you can't do much about it.
my phone is: (PL ERA) MDA COMPACT II.
My second problem : I can't backup ROM to a SD card:
Code:
Cmd>r2sd all
***** user area size = 0x77E0000 Bytes
R2SDBackup() - Download type = 6
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
Cmd>
I unlocked SIMLOCK (other card works) but bootloader looks locked, is there any solution for this?
cid unlock?
i tried unlock with awizard and nothing help.
Code:
...
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred
result=80072746
[11:47:10,82] Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
cid may be locked... :/
how i can unlock cid, and solve this error?
----
And 7MB is everything?? no more can unlock?
WM6 for Tornado
ALPHA RELEASE!
The link is now BROKEN as I have had to take down the ALPHA version to make way for the test BETA that I've made available to a few people for preliminary testing.
Note: This is in no way a finished product, some stuff still might not work, but as far as Tornado ROM's go in terms of speed and reliability, it runs like sh!t off a shovel
But we take no responsibility for any catastrophies that might occur eg. you brick your phone, your dog dies, your girlfriend gets pregnant etc. etc.
This ROM was developed entirely in our free time between college and university, there's no need to pay us for that, but a donation would be nice. If you wish to do so, then please click HERE
To Do:
MMS
HTC Camera App
Remove remaining HTC debug apps
Changed:
Fixed WiFi problems
Fixed Audio problems
Fixed GPRS issues (IPL 2.00, SPL 2.00.0008 and Radio 4.1.13.28_02.61.01 included in the NBF to sort this out)
Custom splash screen
Voice Command in ROM
xT9 cab (must install BEFORE the lanugage pack)
xT9 Language pack with 14 different languages
HTC Task Manager cab
HTC Comm Manager cab (unfortunately, bluetooth settings don't work yet)
HTC Clear storage cab
SP5 and SP5m button fixes as cabs
I will embed these cabs at a later date, however atm, I don't have time so I've just dumped the i-mate SP5 ROM and cab'd up a few apps you all wanted.
Phil
Flashing instructions are as follows:
NOTE: This will work on vista providing you have followed the Vista RUU guide HERE or HERE
For those getting the "Not Allow Operation" error in TeraTermPro, or, even worse, getting stuck in bootloader after flashing. You MUST superCID your device using the SPV-Sevices client! This step is NOT optional and could result in your phone becoming a brick if anything goes wrong
1. Make sure you device is SuperCID, you can check using the SPV Services client, if on reading the CID it displays 3131313131313131 in a long string of numbers then it IS CID unlocked, if not, the click the CID = 11111111 button and reset your device
2. Download the ROM linked in the first post
3. Download the attached TeraTermPro.zip
4. Disable USB connections in ActiveSync (right click the icon in the systray, then select connection settings and untick the USB connections box), turn off your device, hold camera ad plug the device into the USB port to enter bootloader mode.
5. Extract TeraTermPro.zip and run ttermpro.exe, then select Serial and then USB in the drop down box. Then type:
Code:
info 2
You will then probably get the following output:
Code:
info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
HTCSSuperCID ' HTCE
Cmd>
If you don't see HTCSSuperCID ' HTCE above the Cmd> prompt then your device isn't SuperCID. You must use the SPV Services Client to make your device SuperCID as instructed in step 1
6. Type
Code:
format BINFS
This will then output:
Code:
Cmd>format BINFS
Format BinFS partition.
Format is completed!!
Cmd>
7. Now type:
Code:
ResetDevice
You device will then reboot, display the splash screen for around 2 seconds before running into the bootloader again. This is normal.
8. Extract WM6TornadoALPHA.zip then run ROMUpdateUtility.exe in the RUU folder.
9. Wait while it flashes your device
10. Install the extras you want in the 'extra stuff' folder, I recommend you install comm manager, task manager and xT9 as these solve most of the WiFi and T9 icon issues people are expericencing
11. Done
Phil
Thanks go to:
duke_stix
Faria
c4software
tadzio
anichillus
molski
bepe
Speacial thanks to pyrorob and bogdi1988 for their contributions since release
And last but certainly by no means the least, our anonymous sources, who, without their trust, we would have never got anything to cook
Sick of reading?
DOWNLOAD ALREADY!
The link is now BROKEN as I have had to take down the ALPHA version to make way for the test BETA that I've made available to a few people for preliminary testing.
So far, my site has had around 74GB of traffic just from that one file!
This ROM was developed entirely in our free time between college and university, there's no need to pay us for that, but a donation would be nice. If you wish to do so, then please click HERE
Phil
And i am HERE!!
I'm sorry but how can I delete this reply...
I'll sticky that thread for now. Congratz on that wm6 for tornado btw.
That will be the day.
vista help please...
i know u r very busy trying to release the alpha, but could you post any instructions for the people using Vista? how to flash and what do we need to be able to run WM6 with Vista
thanks again for all of the work
I'll get started on 'apps' for WM6!
@bogdi1988 - Updated second post
Phil
jm012a9749 said:
@bogdi1988 - Updated second post
Phil
Click to expand...
Click to collapse
THANKS A BUNCH!!!
one more question what do i use to change the cid?
bogdi1988 said:
THANKS A BUNCH!!!
one more question what do i use to change the cid?
Click to expand...
Click to collapse
Unlock your phone first, then use SPV-Services to change the cid.
See SDA Application Unlock and SPV-Services in the attachments.
was just testing out to see if i can connect via teratermpro.
and it seems i cant. ? :s
Shot at 2007-07-16
Shot at 2007-07-16
fixed the issue seems that tertermpro tools doesnt seem to connect or work for me.
so i used mytt 142.exe application
Turn off the phone and disconnect USB
Press Camera button and holding it insert USB connector (or holding Camera button press Power button for 1-2 seconds).
When "Need an UI (0)?" appears on the screen press [0] immediately. You will see tricolor screen, in the blue zone there will be "Typhoon IU" message, if you see "Typhoon XIP" you were late to press [0], start from beginning.
Run mtty1.42.exe from archive, choose [USB], press Enter and you will see a prompt.
Will this method work if I don't want to SuperCID as my warranty is not over yet?
"Here is how I got the rom to install without the devauth error.
1) use a hex editor on the rom file and search for the devauth.exe string e.g. 44 00 65 00 76 00 41 00
2) between the "devauth" and the "exe" you will see the hex "00 2e".
3) swap these bytes around so they are "2e 00" instead of "00 2e".
4) This will keep te same checksum but will not allow the devauth.exe to run. well it work in my case at least"
Hope it works
Click to expand...
Click to collapse
is it work on my
Imate SP5m \
running Windows Mobile 5
what about downgrade to WM 5.0?
nice work.thx!
Hello
Where is the ROM??
Can anyone post the link please?
thx
The Rom Will Be Posted In The First Page When It Is Ready, Now They Are Just Packing The Rom, So Please Be Patient
i heard that super cid doesn't work with internet explorer 7, is that true?I set cid=111111111 and when i enter in spv_services again it shows me the old cid
I try to flash my vodafone PDA 1615 (tytn II vodafone ITA), but the HardSPL dont install correctly.
When I on my PDA boot the boot loader standard 3 colors (whitout unlock CID).
I try to flash the original WWE HTC rom, but the flash program dont work whit my Tytn vodafone.
I try the mtty program but the PDA freeze on splash screen vodafon whit the radio and os version number on low-right of the screen.(the mtty freeze whit this text:
Cmd>boot
InitDisplay: Display_Chip=1
Fill RSVD information for block 288 to 309
Storage start sector=0x78C0, total sector=0x13A00
Storage start block=504, total block=1256
Total Bad Block in CE: 0
Erase physical block from 792 to 2032
si backup: Erase physical block from 2032 to 2048
No card inserted
OSSIPreLoad ++
I search the vodafone ship rom but I dont find
help me please
and sorry for my english
lucadeejay
I also tried to flash other vodafone rom recostructed (UK, German, Spanish and Italian) whitout luck.
I use the mtty for see my right and I the "FF".
the boot loader write on 3-colors screen:
KAIS130
SPL-1.56.0000
CPLD-8
the command in mtty:
set 14 0
task 8
reset the device but load the bootloader
thx
luca
hi....
my treo 750 hang in start up, when powring on, just the keypad blink for 1
second and turn off, nothing appears on the screen, it appear that it is a
software problem.
to more explain, the phone connect with pc (active sync), but no light in led
when it connected or when i put charger
i try hard reset even zero reset but nothing happened, the problem persist
please some some help me to solve this problem by flash or any solution
plz i need your help
beleive me that i have 5 or 6 days from forum to an other, and the best is xda-developpers, but still now i can't solve my problem.
i have a black screen, with keypad blinking for one second, i try all reset types, i try with mtty ( here the log)
USB>set 14 0
Write Nand Success
HTCST ÚÈÒHTCEUSB>task 28 55aa
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 396
Storage Total block: 548
Total Bad Block in CE: 0
NeedToEraseBlockStart: 409
Storage format success
USB>
USB>checksum
USB>checkimage
IPL CRC checksum = 0xB6279C39
SPL CRC checksum = 0xA8949466
CE CRC checksum = 0xBB96F079
ExtROM CRC checksum = 0x733B2EDA
Radio Image CRC checksum = 0xA43F6FA4
USB>task 0
USB>
------------------------------------------------------
after mtty my phone is always dead, i don't make any flash because i don't know how, and i can't try sd install because the screen is black.
i don't understand task 2a and how to do, if possible give me the procedure
and a tuto for all operations
regards