Could anyone help me ?
It says "installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
I sure I have space to install it. (other apps. can install)
and I closed all running apps.
Help me plz
My device
HP rw6828
Rom wm6.1 by NHOCBANME
your main memory ?
yep I install in main memory (also try in card but still can't)
Space avilable 40942 kb (main)
chances are its already n the rom if its cooked
-PiLoT- said:
chances are its already n the rom if its cooked
Click to expand...
Click to collapse
I think so (In Window it has mscoree3_5.dll)
but I've checked by .Net Configuration (netcfcfg.cab)
I says I don't have any .net CF
Related
Hi,
I followed the recommended bloatware removal as described on this forum, with no problems.
Until today of course !
I'm trying to install Backcountry Navigator (BCN) to my Tilt and I get the following error :
Unable to install .NET Compact Framework as it exists in ROM.
Ok, if its in ROM why is BCN trying to install it ? I assume because it is not available for use,
maybe disabled when I did the bloatware removal?
So, how do I install a new copy of .NET or enable the existing copy that is in ROM ?
I tried to install the BCN program to both the device and to SD card, but got the same error.
Thanks
Bonnie
I can not install the 3.5 cf on my TP. Was wondering if this was due to running a custom rom. Any suggestions. It goes through the install process on my phone then pops up with this error:
Installation Error. Stop all applications and processes, maximize all available storage space, and run installation again. Support info: 3.
Any help is appreciated.
Perhaps it's already installed in the custom ROM?
Rabangus said:
Perhaps it's already installed in the custom ROM?
Click to expand...
Click to collapse
I downloaded windows live and it asked me to install 2.0. 2.0 installed fine, but no dice with 3.5
Rabangus said:
Perhaps it's already installed in the custom ROM?
Click to expand...
Click to collapse
+1
Most (if not all of them) of custom roms in here has pre-installed .net 3.5.
perhaps tell us which custom rom you are using?
Morter Forker said:
I can not install the 3.5 cf on my TP. Was wondering if this was due to running a custom rom. Any suggestions. It goes through the install process on my phone then pops up with this error:
Installation Error. Stop all applications and processes, maximize all available storage space, and run installation again. Support info: 3.
Any help is appreciated.
Click to expand...
Click to collapse
If you are using a cook rom, Its more the 100% true that this rom has nf3.5 allready. So if the install fails you already have 3.5
You can use the .NET Configuration Tool which can be found here http://forum.xda-developers.com/showthread.php?t=373721
It will tell you which version of .NET is installed on your device.
I have had a similar problem, I in-fact did have 3.5 pre-installed but the program wanted specifically v2.0 for some strange reason. I just didn't install but now I am curious as my understanding is that the v3.5 and any version for that matter is inclusive of previous versions. Anyone care to shed some light?
rac
As far as i know, net. 3.5 is not an "update" to net 2.0, you have to install both, if a prog needs 2.0 and you already have 3.5
in a registry key i can see that i ve both versions installed
greetz
Boris
borisku said:
As far as i know, net. 3.5 is not an "update" to net 2.0, you have to install both, if a prog needs 2.0 and you already have 3.5
in a registry key i can see that i ve both versions installed
greetz
Boris
Click to expand...
Click to collapse
Thanks for clearing that up for me, will load v2.0 for the apps that require it.
rac
Erm, 3.5 does in fact support previous versions of .net cf without requiring them installed..
From the belly of the beast
The Microsoft® .NET Compact Framework 3.5 Redistributable contains the common language runtime and class libraries built for the .NET Compact Framework. In addition to version 3.5 support, it also supports applications developed for version 1.0 and 2.0. The .NET Compact Framework 3.5 provides new features such as Windows Communication Foundation, LINQ, SoundPlayer, new runtime tool support, and many other features.
Click to expand...
Click to collapse
Da_G said:
Erm, 3.5 does in fact support previous versions of .net cf without requiring them installed
Click to expand...
Click to collapse
Indeed. The issue is that some installers check for installed .NET CF versions incorrectly, so when they don't see 2.0 on the device, they automatically fail the whole installation.
This should not be compared to the way the desktop .NET Framework functions, because the two have some very significant differences.
This will do the trick.
Much info about .net compact framework 3.5
http://msdn.microsoft.com/en-us/netframework/aa497273.aspx
Did it work now?
I've got a Vogue with Sprint running the official 6.1 OS.
Lately I've been having issues running certain apps. The new Facebook app and ComicReader 1.5.2 are the latest examples. Launching the application gets me this error message:
The application failed to load required components. If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation of the .NET Compact Framework is recommended. Support info: -2147479552 (80001000).
I have uninstalled .NET CF 3.5 through Remove Programs, but when I try to re-install, the device gives me the message:
The .NET Compact Framework version you are attempting to install already exists in ROM.
Then the installer exits.
Any thoughts on how I can get this fixed?
When you install the .net compact framework it sets a registry setting saying it is enabled and i think this is that it looks for when trying to install.
Try deleting this from the registry:
"\local machine\software\microsoft\netcompactframework"
after deleting, reinstall
joel2009 said:
When you install the .net compact framework it sets a registry setting saying it is enabled and i think this is that it looks for when trying to install.
Try deleting this from the registry:
"\local machine\software\microsoft\netcompactframework"
Click to expand...
Click to collapse
That did the trick! Thanks!
AJ
ajbopp said:
That did the trick! Thanks!
AJ
Click to expand...
Click to collapse
Well, it sort of did the trick. It worked for the two apps mentioned (facebook and comicreader) but now fails with the same error message when I try to launch FSD dialer which I just downloaded and re-installed.
sigh
~~Update: I've also discovered that I get 4 of these errors pop up on a soft reset now. I have no idea what's throwing them because so far I haven't noticed any startup items that do not work. It could be a latency issue I suppose, but I did install .NET on the device, not a storage card.
Well this is getting serious. I've uninstalled and reinstalled .NET but it's not helping. Although some programs that didn't work now do, several others like GWatch, GAlarm, DiamondTV, PianoNM, and a notepad application now do not work, and I get the same error. I find two of these missing component errors on the phone every morning, and four of them on every soft reset.
Please someone tell me I'm not looking at a hard reset...
AJ
Try this:
There is a Compact Framework 3.5 powertoy named '.Net Configuration' (see cab below). The application provides control over the .net CF on your device. Here's what you do:
- Install the CAB below (to internal memory!)
- Run '.Net Configuration' from your Start Menu
- Navigate to the 'Device Policy' tab and select version 3.5
- Select 'Apply' then 'OK'
This has worked for other issues like yours.
Yay! All better now. Thanks!
If you have problems after that config it may be your rom. Some roms have registry settings built into them and restorethem on a softreset.... just a heads up
i was having the same problem with proven 1.12 rom for touch pro and following your above advised solved the problem.
Thanks Joel once again.
Run \Windows\cgacutil.exe on your device and it will pop up a window that lists the version(s) of the .NET CF installed on your device. I assume it stands for CompactGlobalAssemblyCacheUtility, and probably reads the stuff straight out of the registry. Easier than hacking about in the there anyway.
cannot install .netconfig
stephj said:
Run \Windows\cgacutil.exe on your device and it will pop up a window that lists the version(s) of the .NET CF installed on your device. I assume it stands for CompactGlobalAssemblyCacheUtility, and probably reads the stuff straight out of the registry. Easier than hacking about in the there anyway.
Click to expand...
Click to collapse
dear forum - unfortunately i cannot install the .netconfig.cab - device keeps saying "installation failed" tried to install it on both, device and than sd-card" - so cant fix the problem?
any advice?
.net - problem
dear forum - any ideas? - need help, urgent, please
Dear Friends,
I am facing the following problem:
I have a device running Windows CE 6.00 (A4 Thin GPS) with 128MB RAM and 2GB FLASH onboard - I want to permanently install .Net Framework to this device - as far as i understand, this is a bit difficult since it appears that part of the framework is saved on the main partition and thus gets deleted on every boot.
I want to develop an app on this platform using .ΝΕΤ CF and i would like to use other .NET CF based apps.
What is the best way to solve this problem ?
Thank you in advance for spending time to consider my question
Thomas.
Have you tried installing the cabs?
Yes i have tried. When i do so, everythink works until the first reset.
As far as i understand some files of the CF must be written on the "main" partition and thus get deleted at every reset since this partions is on RAM
Wierd, i'm afraid i cant help you, soz
Hey everone,
i have an issue with my samsung jack running wm6.1.
The other day i opened a app which i use every day (sxradio2) and i get the following:
Error
"this application requires a newer version of the microsoft .net compact framework than the the version installed on this device"
when i press quit to end the app i then get this:
.NET CF initialization error
ERROR
the application failed to load required componets. if the .net compact framework is installed on a storage card, please ensure that this card is in its place and launch the app again. if this fails a re-installion of the .net cf is recomended. support info:- 2147483643 (80000005)
i know for a fact that when i installed this several months ago that it was installed on the device and not the sd card. when i look thur the registry with an editor and look at the values of i get:
2.0.7045.00 / value data=0
3.5.7283.00 / value data=1
which leads me to belive that the 2.0 version is inactive and the 3.5 version is attive.
When i try to re-install .NET CF 3.5 the phone then tells me that it is already installed an stops the installation.
I'm not new to windows based phones and tweaking them but i would not consider myself a "veteran" either.
i searched the forums already and didnt find any help and didnt want to hijack a thread that may or may not help.
would really apperciate any help that may resolve this without having to hard reset.
thanks in advance!
I notice that you don't mention un installing .net 3.5 before trying to reinstall. Is this the case? It does appear in the remove programs list. And nothing adverse done to device prior to errors?
good day.
no sir
i did not un install it, and it does not appper in remove programs (but i remember it being there at one time).