Related
I downloaded a bunch of nice glass icon set and would like to replace the existing WM6 icons such as MEI and other programs. What is the easiest method of doing this? I did a search but found no results. Any help would be appreciate it.
To change icons in start menu you need to replace the icons on shortcuts by changing the *.lnk files in windows\start menu and its sub-folders.
Just add a ',' (coma) to the end of the text in the file followed by the name of the icon file. You could also look for apps that make shortcuts on PPC. There are even some free ones.
But if you want to change icons of today plugins and other system icons you need to unsign, res-edit then resign some DLLs and that's not an easy process.
Darn it, check this out i got these awsome icons i wanna use.
Link: http://solsie.com/glass-icons-ms-windows/
Ok so these are program icons. No problem there - just get a good graphics app to shrink them to 32x32 pixels and save as *.ico (windows icon format).
Check out GIMP, its free and supports many formats including *.ico and *.png
Then change the shortcuts in start menu.
Like I said before there are several apps (sorry, don't remember their names) that will let you do it easily.
But if you want to change icons of today plugins and other system icons you need to unsign, res-edit then resign some DLLs and that's not an easy process
The above is what I want to do, can you point me in that direction.
YES!!!!, I was able to copy the .png file to my storage card. Then using total commander, I was able to MOVE the file to the windows directory overwriting the original file. Then I did a soft reset to make sure it stuck, and it DID!!!
any chance you want to post the files that you used to overwrite the system files
thank you!
I`m intrested too! Thanks!
IronRed said:
YES!!!!, I was able to copy the .png file to my storage card. Then using total commander, I was able to MOVE the file to the windows directory overwriting the original file. Then I did a soft reset to make sure it stuck, and it DID!!!
Click to expand...
Click to collapse
Can you tell me what the location was that you copied to - all I can find is the hklm etc etc and it wont let me move to there
Loving my Fuze so far! Used the process to hard reset and remove the bloatware....not quite ready to take the plunge with a cooked ROM just yet...
On the home screen above the clock there is a bar that just lists the AT&T logo in the upper right. Nothing else. And because of it I have to scroll on my home screen to see everything.
How the heck do I get rid of this useless waste of real estate?
Interesting, I didn't even notice this but true, what a waste of space! I'm hoping for something like HCC, Home Screen Customizer coming back for Fuze, that was one great app!
You arent kidding! I'm a little bummed, my Tilt had more usable home screen space
hope some1 can find a way.
Two ways to do it:
1) go to http://forum.xda-developers.com/showthread.php?p=2796868&posted=1#post2796868 and aply the original TF3D theme. It will also change your orange to green in the theme though
2) use the diamond TF3D configuration tool and go you tabs and remove 'unknown'
choice 1 -Don't care for change of color
choice 2 - Diamond config tool did not remove the AT&T logo -
Any other suggestions or ideas?
sorry- i didn't read the top post well enough. What I did is get rid of the AT&T tab which I hate. If you look at the other screens of TF3D there is always something on top- the first one should probably list Home but I guess it's true- we could all live without them all entirely...
Unzip and copy this file into the windows directory. Let me know if this works.
Thanks
slicric said:
Unzip and copy this file into the windows directory. Let me know if this works.
Thanks
Click to expand...
Click to collapse
That file already exists in the windows directory. Thus, no change. Still looking at the "AT&T" gray bar across the top of the screen.
I certainly appreciate you trying to help -
I removed the bar using the customizer but I think that qt&t is reading it from the operator name which may never be able to get read of unless someone really customizer tf3d.
FYI - That's not AT&T's doing. Look at all the unlocked TF3D screenshots. It's the line that lists what screen you are looking at or the carrier if it's the home screen. It's in all the cooked ROMs as well since it's part of the basic functionality.
prubin said:
That file already exists in the windows directory. Thus, no change. Still looking at the "AT&T" gray bar across the top of the screen.
I certainly appreciate you trying to help -
Click to expand...
Click to collapse
First close TF3D, then extract file into windows directory, over writing existing file. Start TF3D again. Logo should be gone. Worked for me.
I am losing my touch with this Touch (Fuze) -
Could not overwrite - got error message that basically said that file is write protected and I do not have permission.
Tried to delete the original and then replace - again receive denials.
I have tried to, using a registry editor, make changes to the file (make it able to be read; edit it; rename it;, etc) without any success. All attempts have been rejected.
Perhaps I could trouble you as to how to either overwrite or delete and replace.
Thanks
prubin said:
I am losing my touch with this Touch (Fuze) -
Could not overwrite - got error message that basically said that file is write protected and I do not have permission.
Tried to delete the original and then replace - again receive denials.
I have tried to, using a registry editor, make changes to the file (make it able to be read; edit it; rename it;, etc) without any success. All attempts have been rejected.
Perhaps I could trouble you as to how to either overwrite or delete and replace.
Thanks
Click to expand...
Click to collapse
Copy the file to somewhere else on the phone, maybe like a temp directory.
Then use TotalCommander to copy the file into windows directory.
Thats it.
Zaiaku said:
Copy the file to somewhere else on the phone, maybe like a temp directory.
Then use TotalCommander to copy the file into windows directory.
Thats it.
Click to expand...
Click to collapse
Thanks - finally successful in removing the AT&T logo - however, the gray bar remains -
I certainly appreciate the efforts that you folks have gone to.
If we could move the date up to the empty space, that would be good.
Am I the only one that has both the date and AT&T on that line?
I wouldn't want to get rid of it, because it would mean getting rid of the date.
I'm using a sprint flip-clock, but I don't recall how it looked in stock form.
Standard factory ROM.
I think what you are wanting to get rid of is what I've seen on here referred to as the top "curtain". Do a search on that. I've seen it mentioned somewhere, but I couldn't find it off the bat.
This removes the curtain: http://www.ppcmobility.com/forums/showthread.php?t=261
Haven't tried it so I don't know if it does the trick
Theres one thing I have to say before I begin: Make good skins!
Theres nothing wrong on reusing stuf from others (with due credits and permission, if needed) but dont go for the easy mix, make some good graphics with cool transparencies and plently of bling.
Please dont make ugly skins (like I did) for example, the M2D skin thread is huge, but only some are thrully nice and different.
Each person has its own taste, but lets all make an effort to raise the bar.
The skin change can be as simple as editing the 2 main images: The main tab and the minimized tabs, you can do much, much more, but those 2 images are the main change to the visual effect.
The minimized tab is very simple, its just a PNG inside the Windows folder named CHome_listback.png (its hidden, so use Resco Explorer if needed).
The main tab is a png inside a DLL with other icons, for that you need to edit the DLL with a special program.
To edit the DLL (containg the main graphics and icons):
----------------------------------------------------
- Download ans install the PE Explorer trial: http://www.heaventools.com/download.htm
- Copy bronzeres.dll from the Windows folder to your SD card then to your PC.
- Open the DLL in PE Explorer and click on View > Resources
- See all the files inside the RC Data folder and double-click the png number 3000 for portrait or 4000 for landscape.
- Import a new PNG into that new screen and save the dll when finished (backup yours first).
- Download, export an open MSigner and open your dll inside this software.
- Copy that dll into your SD Card and then into the Windows folder (use Resco explorer if it denies access).
- Reset and enjoy.
To change the layout of the plugin you need to edit the Titanium_*.cpr file on your Windows folder (like Titanium_240x320.cpr, or whatever your screen resolution is), its a "simple" XML inside, you can see it with Notepad.
See this link for a detailed explanation of it:
Titanium Walkthrough by drkfngthdragnlrd
http://forum.xda-developers.com/showpost.php?p=3601164&postcount=2
You can download here a (bad) example of a simple skin.
More tools for developers:
--------------------------
A Guide to Windows Mobile 6.5 by joel2009
http://forum.xda-developers.com/showthread.php?p=3626556
CPL/CPR online creator:
http://forum.xda-developers.com/showthread.php?t=520857
Worked like a charm...
Great tutorial...
Many Thanks
Thanks, Iwas trying to look at the bronzeres.dll with reshacker and getting really confused. All I saw was a bunch of code. No images. I'll try this PE Explorer out. Anybody know if there is a chrome or grey theme already? Do we not need to sign the dll as in previous skinning like taskbar?
Hmmm... to be honest I dont remenber if I signed it, I dont think i did... :/
PNG Format
Hi TWolf,
thanks for the perfect instructions. Just tried myself. WAnt to change the 3000.png. But if I export it into Photoshop and create a new one with transparnency Titanium just shows background after having copied the new dll.
Do you know the specifications of the PNG?
Thanks
Januwar
there is also a tutorial for cpr files?
would be nice like the one for manila 2d, where people put lines and explanations...
Januwar said:
Hi TWolf,
thanks for the perfect instructions. Just tried myself. WAnt to change the 3000.png. But if I export it into Photoshop and create a new one with transparnency Titanium just shows background after having copied the new dll.
Do you know the specifications of the PNG?
Thanks
Januwar
Click to expand...
Click to collapse
Hmmm.. I used simple 32 bits alpha transparent pngs from flash or paint shop pro... :/
KeRmiT80 said:
there is also a tutorial for cpr files?
would be nice like the one for manila 2d, where people put lines and explanations...
Click to expand...
Click to collapse
The link on the first post of Titanium Walkthrough by drkfngthdragnlrd has some info on that.
when i replace the file and reboot it. I get a blank today screen and its set on windows default so i guess i'm doing something wrong. Same problem as januwar
Thats strange, could you test this?
Open your file on the signer and after its signed try to put it on the windows folder again...
I wasnt sure this step was really needed..
signed file works
thank you!!!
now just a question...how to add icons to "collapsed" tabs?
what i understood is that is possible to link to an external icon or use one in the bronzeres.dll...
...i'd like to know how
Thanks, added to the tutorial.
That depends of the plugin, if it uses icons that are inside this dll, then they can be changed too... If they use external pngs, thats even easier.
yes but only if the plugin already has the code to display an icon in the cpr right?
dont' know...it's the right place to ask for an example?
how to add an icon (not to change only) can you show the lines to add to the cpr for a generic tab? maybe it's possible to use the chome editor, i saw some registry entries related to icons in tabs editor...
something easy...newbie level please
its exacly the same procedure, just instead of being that icon number, its another one... :/
In some cases, if you edit the registry to a full path png file, it will use it.
no sorry maybe i didn't explain myself...
default plugins in titanium has only text when not selected, right?
now if i want (like i saw in some themes) to add an icon on the left to a non selected tab i think i have to edit the cpr and add some lines to create a link to a number in case of bronzeres or to an external png.
what i need is an example of these lines to add to cpr so i can replicate on my own for all my installed plugins.
i hope i've been more clear this time
ps :sorry for the dumb question as i told you i'm newbie, thank you for your help
Theres already a thread, as I said, to show ppl how tu use the cpr files... :/
You can see a example of what I did here:
http://forum.xda-developers.com/showpost.php?p=3788297&postcount=45
I added this to the condensed view of my resolution cpr:
Code:
<Image ID="[B]ICON[/B]" Left="0" Top="0" Width="36" Height="36" />
And this to the registry:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\CHome\system\CondensedPage]
"[B]ICON[/B]"="\\[I]My Documents\\Themes\\Titanium System Panel\\sd.png[/I]
thank you
i've read the walkthrought but i couldn't find these...maybe i have to search in the whole thread
These nice people copied the first post text and did even gave credit to xda:
http://pocketpc-live.com/pocket-pc/how-to-create-titanium-skins.html
Send them a nice letter of thanks.
OK...color me stupid, but I don't see CHome_listback.png on my device...I read and followed:
"The minimized tab is very simple, its just a PNG inside the Windows folder named CHome_listback.png (its hidden, so use Resco Explorer if needed)."
from the first post, but it is not there. it sharts with CHome_send..... and then a list of CHome_ Win..... images, but no CHome_listback.png!!
Any suggestions or ideas as to why?
Thanks
Strange, maybe it could be a different build, to be sure, copy my png from the UGLY SKIN to your Windows folder.
syrguy1969 said:
OK...color me stupid, but I don't see CHome_listback.png on my device...I read and followed:
"The minimized tab is very simple, its just a PNG inside the Windows folder named CHome_listback.png (its hidden, so use Resco Explorer if needed)."
from the first post, but it is not there. it sharts with CHome_send..... and then a list of CHome_ Win..... images, but no CHome_listback.png!!
Any suggestions or ideas as to why?
Thanks
Click to expand...
Click to collapse
Me too, I could'nt find CHome_listback.png at all with Total commander/or Resco - just the same list as above.
I'm using NRGZ rom on the Diamond
Creating your clock image
Step one:
Creating your image
Using Photoshop, Macromedia Fireworks, or a similar image editing application, create your clock.
Your image must be:
• PNG file type;
• 256 x 256 pixels; and
• have a transparent background
Step two:
Converting your image into a QTC manila file
Download Mode9 Editor from:
http://forum.xda-developers.com/showthread.php?t=464984
When you open Mode9 Editor for the first time, you will be asked to enter the directory you will have specific files in. Use the help guide/manual that comes with the download to help you through this step.
Once you have Mode9Editor open, click on the ‘open’ icon (top left toolbar) and open your clock PNG image.
Now click on the little icon, above the image preview, that looks like a little disk with a ‘Q’ in it.
Save the new file as:
20F62884_manila
Copy your new clock file to your phone or storage card.
How to use your new clock image
Step one:
Backup, backup, backup
Using Resco Explorer, Total Commander or something similar, go to (on your phone):
Device – Windows
Copy the following file:
20F62884_manila
Save a copy of this file somewhere safe.
This is your backup in the event that you wish to return to Co0kie’s original analogue clock.
Step two:
Installing your new clock
Copy your new clock file:
20F62884_manila
Using Resco Explorer, Total Commander or something similar, paste the new clock file to:
Device – Windows
You will be prompted to overwrite the original file. Say ‘yes’ (don’t panic, remember, you have a backup)
Step three:
Restart Sense
A soft reset of the device is not necessary; however this will refresh Sense if this is your preferred method.
Alternatively, you can turn Sense off by going to:
Settings (tab) – Menu – All settings – Today – Items (tab) - untick ‘HTC Sense’ - ok
Then, restart Sense by going to:
Today – Items (tab) - tick ‘HTC Sense’ – ok
OR
Another way to restart Sense is to do as follows:
• Open CHTEditor
• Make a minor setting change
• Go menu - apply changes
• DO NOT EXIT
• No go and undo the change you just applied (unless you want to keep it )
• Go menu - apply changes
• Exit
Sense will restart.
Great job....
Thanks for your sharing.....
Gino14 said:
Great job....
Thanks for your sharing.....
Click to expand...
Click to collapse
You're welcome.
I hope it is clear enough. Be sure to let me know if I have missed something out or could change something to make it clearer.
I have also found it to be quicker to restart sense by going into the Cookie Home Tab Editor and applying a new lockscreen (select apply changes) and then reverting (without exiting, and again applying changes), and then exit the editor. This will restart sense without you having to wait for it to turn off, and then waiting again for it to turn back on. Without a tool that does it automatically, this is the fastest method I have found for restarting sense (and I use it all the time for applying analog clocks in particular).
SolusCado said:
I have also found it to be quicker to restart sense by going into the Cookie Home Tab Editor and applying a new lockscreen (select apply changes) and then reverting (without exiting, and again applying changes), and then exit the editor. This will restart sense without you having to wait for it to turn off, and then waiting again for it to turn back on. Without a tool that does it automatically, this is the fastest method I have found for restarting sense (and I use it all the time for applying analog clocks in particular).
Click to expand...
Click to collapse
Another good option.
I like this one. In fact it should work with any change made in CHTEditor. Just make the chang, apply it, undo the change, apply and exit.
Thanks for the feedback. I shall add the option to the first post
Franwella said:
Another good option.
I like this one. In fact it should work with any change made in CHTEditor. Just make the chang, apply it, undo the change, apply and exit.
Thanks for the feedback. I shall add the option to the first post
Click to expand...
Click to collapse
Thanks.
And yeah - I should've mentioned you could do it with just about any setting. Some of them though can have unintended consequences. For example, changing the number of quick link screens and then changing them back seems to rearrange quicklinks.
SolusCado said:
Thanks.
And yeah - I should've mentioned you could do it with just about any setting. Some of them though can have unintended consequences. For example, changing the number of quick link screens and then changing them back seems to rearrange quicklinks.
Click to expand...
Click to collapse
Good point. Best to stick to the basic changes
How bout the hands? When you mentioned saving the image as png I was thinking you are referring to just the clock face right?
Leechoonhwee said:
How bout the hands? When you mentioned saving the image as png I was thinking you are referring to just the clock face right?
Click to expand...
Click to collapse
Yes indeedy. The instructions above are for the clockface only; however, if you would like to have a go at making the hands, it is much the same process. The files you need to make, and their respective sizes are as follows:
HTML:
20F62884_manila - background - 256x256
0AB9C3F4_manila - hour hand - 16x256
4BDFBA48_manila - minute hand - 16x256
2A87D392_manila - second hand - 16x256
7126E342_manila - clock dot - 32x32
My fastest way for Sense reset - RestartManila.exe. I found this exe somewhere in this forum - thanks to the unknown creator. The cab will create a shortcut in windows/start menu. I made then a quicklink.
Hello
So i test it to make a own clock with some templates found on the Forum.
But after i copied the file in my Windows folder and restart manila i can only see the hands and second hand.
What did i wrong.
My way.
Open mod9--->open my png clock (256x256 and transperent)--->Save it as manila file--->Copie to my storage card--->copie with total commander in my Windows folder and overwrite the one that exist--->Softreset.
Pls help.
How can I make files for hands wider than 16 x 256, so for instance 32 x 256 or 128 x 256?
Make a png picture with the width of your choice (f.e. 32 x 256 or 128 x 256). For the correct rotation point you have to place the hand in the same way in the middle like in a 16x256 file. Then import this picture in the right manila file (I use CFC Gui). This will automatically change the picture in the manila file to the new size.
For other settings in 7c60907d_manila see this post http://forum.xda-developers.com/showpost.php?p=6368698&postcount=32
Dic3ptor said:
So i test it to make a own clock with some templates found on the Forum.
But after i copied the file in my Windows folder and restart manila i can only see the hands and second hand.
What did i wrong.
My way.
Open mod9--->open my png clock (256x256 and transperent)--->Save it as manila file--->Copie to my storage card--->copie with total commander in my Windows folder and overwrite the one that exist--->Softreset.
Pls help.
Click to expand...
Click to collapse
By my take on the above process you have done everything correctly.
I am, of course, assuming that you have Co0kies HTC installed!
The only thing I can think of is that you may have misnamed the manila file. Double check and ensure that the clockface file name is 20F62884_manila
Franwella said:
By my take on the above process you have done everything correctly.
I am, of course, assuming that you have Co0kies HTC installed!
The only thing I can think of is that you may have misnamed the manila file. Double check and ensure that the clockface file name is 20F62884_manila
Click to expand...
Click to collapse
Yes Cookies is installed! Hmm maybe a did a mistake with the name of the manila file. Thx for your answer.
Dic3ptor said:
Hmm maybe a did a mistake with the name of the manila file. Thx for your answer.
Click to expand...
Click to collapse
Believe me, you wouldn't be the first *sheepish grin*
rat_2665 said:
Make a png picture with the width of your choice (f.e. 32 x 256 or 128 x 256). For the correct rotation point you have to place the hand in the same way in the middle like in a 16x256 file. Then import this picture in the right manila file (I use CFC Gui). This will automatically change the picture in the manila file to the new size.
For other settings in 7c60907d_manila see this post http://forum.xda-developers.com/showpost.php?p=6368698&postcount=32
Click to expand...
Click to collapse
Thanks! I'll look into it.
gradient?
hi, i'm trying to make some of my own clock for cht but i have a problem with gradient and transparency (see picture). this is the clock i made but can you tell me what to do to get a smoth gradient not like this one on the picture, it looks ok in corel but when i create a manila file with manila editor and put it in my phone it's not good (low quality).thx
Resizing clocks
is there an easy way to increase the size of one of the clocks I downloaded here? From the links in your clock list thread I found lechux's Hero clock. I really like the HTC one but it's too small! How can I resize it up by 25%?
lowfieldgarage said:
is there an easy way to increase the size of one of the clocks I downloaded here? From the links in your clock list thread I found lechux's Hero clock. I really like the HTC one but it's too small! How can I resize it up by 25%?
Click to expand...
Click to collapse
The only way really is to recreate the clock.
You could try converting the manila file back to PNG, then increasing the image and seeing if you lose much resolution. If you get a reasonable result, then it's a matter of saving the new PNG and converting back into manila.
Of course, if you do all this you should credit the original developer.
Also keep in mind that if you create a bigger clockface, and the one you're interested in comes with hands, then the hands will need to be recreated to fit the new size.
Since I found the HTC Leo's Sense quite difficult to edit the bloody Manila files (in OMNIA was... totally simple project), I'm willing to give (via PayPal donate) some cash, to someone who can create what I need...
He (they") will give me the exact dimensions of the files and I PERSONALLY will create my own graphics and I'll give him (them?) the files and he (they?) will create me what I want...
I want:
1. Co0kie (my personal) clocks (flip/analog)...
2. Slider (my personal) icons...
...and a couple things more; I'll have to check.
Anyone interesting?
Try CHTtweaks. You can change many of the items of co0kie home tab including flip & analog clock, softbar, lockscreen & SMS & email widget using simple png files; also you can get lot of transparency and easily chage text fonts. All with a simple file explorer, forget about manila files.
Regarding the slidertab is a bit more complicated, but if you upload here your png files for sure some other user will kindly help you. To start with you should install in your PC m9editor and / or CFC_GUI; also Resco Explorer or Total Commander in your device; then do a search in your device's windows folder for *_manila; then copy all the founded files to your SD and from there to your PC.
In post #8 of this thread: http://forum.xda-developers.com/showthread.php?t=696214 I did update a zip with all the files included in the slider-tab. Unzip in a separate folder in your PC. The files have the manila names, but png format. You can edit each one with PS, just keep the names and the sizes. It will be easy to convert them back to manila format before put them in your device.
Do it slowly, and ask here what you need. And do not forget to enjoy!
poy any reason why you would copy manila files to sd card first then pc?
i would just open windows folder on pc then copy straight to the pc.
You are right, probably my PC is very slow so i transfer the files using the card reader and i also like to have a backup copy of manila in SD. Of course is not essential .... the most important is to put all manila files in PC -no matter how- and do the edition there.
lol your pc is slow?
I may have you beat. it takes my pc about an hour and a half to copy all manila files.
frustrating but still hella fun though.
@ OP upload your files.
my sig : windroid have everything u want =] If u need edit anything .PM me.
or U could use Poys CHT Tweak. its easy to use
Hi Felas,
Nice to see you guys Best regards my friends
Hi Andrew.mazlim,
You don't need to pay for it my friends, you allways will find someone willing to help, This is the strength of the great XDA family
Just upload your files and we all will help you
PD: Follow the instructions of the Master Poyensa
Any help you need.
I totally agree with all that was said here today, thank you all for being good family members.
[email protected] said:
Hi Felas,
Nice to see you guys Best regards my friends
Hi Andrew.mazlim,
You don't need to pay for it my friends, you allways will find someone willing to help, This is the strength of the great XDA family
Just upload your files and we all will help you
PD: Follow the instructions of the Master Poyensa
Click to expand...
Click to collapse
Thxs all of you, for the interest.
But... I don't know the BLOODY DIMENSIONS of these graph files!
I'm pro designer and if you may check bellow the link, I made a "total-theme" for OMNIA - took some serious time, but was easy, after all.
In OMNIA's "Manila", the project was so "crystal"; just copied EVERY graph file from Windows folder (mobile) in my PC, edited them, re-copied back to mobile... Or even better (with M2DC), I was extracting the ENTIRE theme somewhere in my mobile, copied the theme in the PC, opened via WinRar, editing the files, re-placing back in the "rar" theme file... and back to mobile!
SIMPLE!
In Leo's Sense Manila, it's NOT THAT simple!
Anyways... Is it possible, someone, to give me the BASIC files for these graphics (for example, Sliders icon mask and icon itself, Slider tab's icons, Co0kie clocks seperated graphs, etc.), to edit them (make my own graps) and help me out?
HERE IS my first personal Co0kie wallpaper (wide) I made; maybe I'll make others too, but I like that (see bellow)...
So... I wonna make some serious modifications, with the... obvious theme!
hey op, if no ones done it before I put my pc on later I'll help you out with slider icon sizes and convert your finished png images to manila, I did a pretty cool effort for my phone......
whats up don?
why dont you give him the manila files names for the slider files if you have them on hand.
@ OP here is a useful link to get your manila files off your device and convert em on your PC to png using CFCGUI. CFCGUI is needed.
link for mini tut
http://forum.ppcgeeks.com/tp2-theme...nila-images-have-exactly-design-you-want.html
CFCGUI
http://forum.xda-developers.com/showthread.php?t=470798
hi andrew, i have given you the "bloody dimensions" in the two links i posted you will find all the files in png format, just open and edit. Then post them here.We will help you to convert it to manila .....
ericv99 said:
whats up don?
why dont you give him the manila files names for the slider files if you have them on hand.
@ OP here is a useful link to get your manila files off your device and convert em on your PC to png using CFCGUI. CFCGUI is needed.
link for mini tut
http://forum.ppcgeeks.com/tp2-theme...nila-images-have-exactly-design-you-want.html
CFCGUI
http://forum.xda-developers.com/showthread.php?t=470798
Click to expand...
Click to collapse
hey there bud, hows it going?. thats exactly what im going to do now, i wasnt on the pc earlier so here goes.......
op, heres the files you need for the slider. i've sent you my own but the originals are the exact same size and i have these at hand. theres the large ones in the middle of the screen, the ones for the actual slider bar and the ones for when you slide your finger across the bar, you'll sus it out im sure.
just make a note of the actual image size and position within the canvas size, cut it and add your own images. when your done let me know an i'll convert them to manila for you. ask away if you need help......
ericv99 said:
whats up don?
why dont you give him the manila files names for the slider files if you have them on hand.
@ OP here is a useful link to get your manila files off your device and convert em on your PC to png using CFCGUI. CFCGUI is needed.
link for mini tut
http://forum.ppcgeeks.com/tp2-theme...nila-images-have-exactly-design-you-want.html
CFCGUI
http://forum.xda-developers.com/showthread.php?t=470798
Click to expand...
Click to collapse
that's a very good mini tutotial. I remember that i was using the same when i've edited my verry first flip clock on my stock rom (it's been a while )
Τhk you all, lads. I'm really-really appreciated your interesting...
Ah! I forgot to show you what I've done for OMNIA's Manila. Here:
http://www.modaco.com/content/i900-...and-complete-ultimate-theme-startup-m2d-s2u2/
hey andrew hows it going with the mods?
ericv99 said:
hey andrew hows it going with the mods?
Click to expand...
Click to collapse
Well, don't know if I'll try to mod them myself (still looking for someone to do it for me and donate 'im), because I'm in love with my new "toy", a Cowon J3 and I'm trying to MOD THAT UI!