Hi,
how to switch back to german hw-kb layout after flashing a WWE ROM ?
Is there a CAB to restore it? I already tried one, but it didn´t change all the keys...
What about extracting this from a Stock ROM ? Possible ?
Related
I flashed my MDAc with a english (WWE) firmware but I´m unable to go through the change language process. It wont work on my device cause the hacked firmware is unable to be installed via the hacked maupdate.exe.
Anyone out there who has a working, german ROM file an will share it to me? *thx*
Hi. Congratulations for your good work!!!
Last week i bought an O2 XDA Neo (used) from Germany. Everything was working ok. The only problem was with the language (German) so i wanted to change the language to English and after that if it was possible to Greek. I thought that the only way to do that was to change its firmware. My phone had the official firmware WM5. I downloaded and installed ActiveSync on computer. Then i synchonised the PC with the phone succesfully. And at last i runned a rom that downloaded from wiki from the prophet forum. It installed succefully but after a restart the phone stucked on a three colour screen. I reinstalled the same rom and another rom but the problem is the same. Nothing works. The phone is dead?
What did wrong? Is it possible to repair this problem? Plz if enyone knows something, i would appreciate it if he replies to this thread.
the good thing is..
your prophet is NOT dead..
simply flash it again..
tri-colour screen is a bootloader mode and in that state you still can flash your neo with RUU ROMs
a prophet is called DEAD ,only if it cannot enter bootloader state
flash it with ORIGINAL ROM..and that should works..
read the instructions before going to WM6 as it needs some steps before simply flashing it
check this link :
http://forum.xda-developers.com/showthread.php?t=389558
Hi m friends. After hard work i finally made my phone works again. I instaled the oficial rom for prophet (O2 Germany) that founded in another thread. Then it worked fine. Then i hadrspled my devive and finally i installed a WM6 rom caslled evolution.... and it worked fine. But does enyone knows if it is possible to have greek language and greek keypad on my prophet? Thank you for your help in advance.
There is a greek ROM here: http://forum.xda-developers.com/showthread.php?t=323868
It uses the old upgrading method, so you will need to flash the "Part One" ROM first, then don't do anything to the device and then flash the "Part 2".
Does anybody have this rom ?
i have the english version, but i need the NL version.
thanks in advance !
it was on here :
http://rapidshare.de/files/35062662/OrangeRom_Original_Dutch.rar
but not anymore !
EDIT :
seems its not on any ftp.
I have seen a qtek NL rom ... that would be aweome too ...
EDIT 2 :
trying this one...
http://www.qtek.nl/S200_updates.asp
Dane_sober said:
Does anybody have this rom ?
i have the english version, but i need the NL version.
thanks in advance !
Click to expand...
Click to collapse
Unless it's here: http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs or on the Orange NL site, you'll have some trouble finding it...
bah
the qtek version wont install ( wrong vendor ID )
is there a way to CID unlock G4 models ????
Dane_sober said:
bah
the qtek version wont install ( wrong vendor ID )
is there a way to CID unlock G4 models ????
Click to expand...
Click to collapse
HardSPL/SoftSPL will. (I'd recommend SoftSPL as an official ROM will overwrite the SPL any way).
I tried softSPL and had some errors in the pop-up command box.
I'll try again tomorrow.
Dane_sober said:
I tried softSPL and had some errors in the pop-up command box.
I'll try again tomorrow.
Click to expand...
Click to collapse
If all else fails, I'd suggest unpacking the ROM download file (right click on your PC and select "UnZip/UnPack here") and then copy the nk.nbf file from that into a folder with the "NEW" RUUs and flash it as though it were a new WM6.1 ROM (including the Hard/Soft SPL)...
I tried that ( also with prophet tools ) but it didnt work for me :S
I'll try later and post the updates here.
Thanks for thinking with me !
Dane_sober said:
I tried that ( also with prophet tools ) but it didnt work for me :S
I'll try later and post the updates here.
Thanks for thinking with me !
Click to expand...
Click to collapse
Can your device boot up? (is it stuck in bootloader?)
I managed to install a wm 6.1 rom
sucessfully
Thanks l3v5y !!!
But still no dice with TOMTOM NAVIGATOR 6
the program hangs after the splash, but when I boot without the SD card, it says no maps found. So there might be a conflict on the SD.
TTN 7 does not work either ( just tried to install the diamond .cab to see if it worked)
But the prophet device is not compatible.
Sillyness is that is used to work perfect.
I'm going to try to find a solution for this, if else I'll FW-down back to WM5 or 6.
Which is a bit more familiar for the original owner.
Where I can find original rom wm5 for spv c600 from orange PL.
Orange UK ROM
Orange UK version is here.
.. can't help you with any other versions, sorry
I tried this. It's only upgrade. I need original rom. I tried to install wm6 and I don't unlock superCID. My original rom was delated and now i can't install other.
On other forum i found that I need original rom from Orange PL. If i want to install wm6 or 6.1 RUU shows error :invalid vender id. On my smartphone only shows starup animation and bootloader. What I have to do?
Help!
Sorry for my english. I'm polish
I have orginal Orange PL ROM on microSD card. If You want I can try to make an image.Backup ROM working-I've tried.
If you do image of rom it will be in *.bin. I can't install rom in this format.
Do you have a normal/standart installation of this rom??
Or whether you would help to me in the installation of rom in *.bin format.
Sorry for my English
I've made ROM backup before flashing new soft, so I can make an image of my card-->then You'll put this image on to Your card & that's it.After that insert card into the phone.Push camera button and put data cable into the USB slot.Phone automaticly start flashing from backup ROM fro SD card.
I've tried and it's 100% working.
Don't appologise for "english". I'm from Poland too
In my spv c600 it's don't work. Would you write to me on gg (10131443) and help me?
you can cid unlock your phone now... not ?
No because on my spv start only bootloader. I don't know what I have to do.
HELP!!
same problem here. It only start in bootloader. I can't do anything now.
Hi my name is Kostas i'm from Greece and i have a touch pro.i need some answers so i can do some update at my rom from 6 to 6.5.i found i rom that i like but i have some questions.
1.What CDMA is and what GSM,what is the difference and how i know which one i own.
2.To update to another rom i have to Hard SPL my phone?and what is this?do i hve to unlock something?
3.If i flash my touch pro can i install the Greek Language?
4.The rom i found is this
Code:
http://forum.xda-developers.com/showthread.php?t=511146
, is it good?which one should i download from this one,the Regular or the MSVC?
Thank for any answer in advance please help me to work it out.
The easiest to explain (without going into the technology) is that a GSM phone most common has a SIM card while the "SIM" in a CDMA phone is a fixed install, you as a user / customer cannot change. Since you are in Europe I assume you do have a SIM card thus a GSM phone.
Most ROMs here in the forum if not otherwise specified are GSM and you do need to flash any than your carrier provided ROM.
You must have your phone SECURITY UNLOCKED (which is different from SIM unlocked) to flash a NON Raphael/Fuze Radio.
The ROM you quote IS a GSM ROM.
More on the CDMA the subject can be found here http://www.google.com/cse?cx=000825...+cdma&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
So my touch pro is GSM?What tools do i need to have wm6.5?which rom i mean and what tools?to SECURITY UNLOCK the phone what do i need can you help me out with some steps?does this rom is any good?it will work on my phone?
As mentioned to you in the Energy 3.0 thread, please DO some reading!
You first need to backup your PIM data (contacts), flash hardSPL (please look up the thread and download the software).
Afterwards you can flash a non carrier bound ROM (i.e. Energy ROM where you posted as well).
WITHOUT hardSPL you may BRICK your phone or get STUCK at 0% loading for ages.
Note:
Be aware that you have an original TouchPro not a branded ATT Fuze so you should read up front to get the right keyboard layout back, you'll find the "how-to" here in the forum.
ok 2 more questions for you please sorry if bothering.about hardSPL could you send the page to download it?after i do hardSPL i update with the rom i send you?at the post of this rom it says Download from EU Server > Regular / MSVC which i use Regular or Msvc?And last with right keyboard layout back you mean to bring back Greek language?
hardSPL
http://forum.xda-developers.com/showthread.php?t=410150
ROM version valid 2.0 and 3.0
http://forum.xda-developers.com/showpost.php?p=3749191&postcount=1627
Keyboard... look yourself
i still don't understand what you mean with the keyboard.i downloaded hardSPL and the MSVC rom i send you.now i'm ready to flash my phone?
First you have to flash hardSPL (read the corresponding thread) to allow to flash a non carrier provided ROM.
Afterwards you can flash the NRG ROM you want.
If you have Greek characters on your keyboard I cannot help you but answers HOW TO get the right keyboard layout are in the forum.
If you have the original TouchPro engl. layout just read NRG's first post!!!
If you own a Touch PRO, use the "Keyboard Selector" application under Utilities (after you flash the ROM) to select the proper keyboard layout to use. The ROM comes with the Fuze layout by default.
Click to expand...
Click to collapse
If you really don't know what you are doing, read and learn like all of us did and in two weeks or so you'll be up to speed.
Hi everything worked fine the only thing i have to fix is the Greek language now.thanks for your help.
kostas I'm really not the one to ask since I simply do not know exactly what to do.
You have to change the MUI value in the reg to get the greek characters and keyboard working. Do a search for keyboard mapping or for MUI codes.
There is a Tilt ROM chef called B16B in the Tilt forum who is from Greece, you may contact him he may be able to help.
Perhaps there's something in this search but I don't know
http://www.google.com/custom?hl=en&...G=Search&cx=000825531964825142534:cqr2sjirilw