My phone is stuck on the color block screen
RUUNBH is in the upper right corner.
It also has
KAIS1*0
SPL_3.02.0000
CPLD-8
I have been trying all day to fix it but nothing works. HELP!
leciathegunner said:
My phone is stuck on the color block screen
RUUNBH is in the upper right corner.
It also has
KAIS1*0
SPL_3.02.0000
CPLD-8
I have been trying all day to fix it but nothing works. HELP!
Click to expand...
Click to collapse
Try reflashing your original rom, and look here for more solutions.
http://forum.xda-developers.com/showthread.php?t=423486
I tried but for some reason the loading process keeps failing. The sync icon stays green and a message comes up on my comp saying that one of the usb devices attached has malfunctioned.
leciathegunner said:
I tried but for some reason the loading process keeps failing. The sync icon stays green and a message comes up on my comp saying that one of the usb devices attached has malfunctioned.
Click to expand...
Click to collapse
Read that thread again.
The wiki page has instrcutions on how to remove RUUNBH using MTTY.
Dave
what is mtty? Is there something that I can download?I don't know where to begin. The thread you were referring to said For the AT&T Tilt with any SPL below 1.93 the proper sequence for RUUNBH errors is:
cmd> set 16 0
cmd>boot
My SPL is 3.02
leciathegunner said:
what is mtty? Is there something that I can download?I don't know where to begin. The thread you were referring to said For the AT&T Tilt with any SPL below 1.93 the proper sequence for RUUNBH errors is:
cmd> set 16 0
cmd>boot
My SPL is 3.02
Click to expand...
Click to collapse
You need to goto this wiki page and read this section: If RUUNBH is still showing on the Bootloaded
Ta
Dave
DaveShaw said:
You need to goto this wiki page and read this section: If RUUNBH is still showing on the Bootloaded
Ta
Dave
Click to expand...
Click to collapse
Nothing is working. I can't establish a usb connection so I have no way of getting anything to myphone. This is frustrating. I have been trying to fix my phone since tuesday. I feel like pulling my hair out!!!
Related
All,
Somehow my bootloader got trashed while swapping memory cards and I'd like to easiest fix to get it going again. (At Tri-Color screen) If I plug it in and run RUU_Kaiser_Cingular_WWE.exe (I'm running nonbloat Tilt rom) it'll start the upgrade, stop at about 1%, but the phone will boot and everything is there. So I'm just looking for a quick way to make it stick so I don't have to do that anymore..
I'll play with cooked ROMs soon, everything is working GREAT for the time being and I don't wanna reinstall!
Thanks all!
-RT
Doesn't sound like you have HardSPL installed but this should fix your problem (at least your issue sounds very similar) ... after you get it fixed you should consider installing HardSPL.
Credit to pof for the instructions below which were part of his now dead SSPL thread for Kaiser:
For those of you had the phone stuck in bootloader mode after flash with SSPL stopping at 16%, follow these instructions to unbrick your phone:
1. Download mtty.exe
2. Disable activesync (connection settings -> uncheck "allow usb connections")
3. Connect your Kaiser to PC using USB cable.
4. Open mtty, select USB port and click OK.
5. Hit ENTER twice, you should see the "Cmd>" prompt.
6. Type the command "boot", you should see something like this:
Code:
Cmd> boot
InitDisplay: Display_Chip=1
No card inserted
OSSIReadBack ++
Read SI data from flash success
tail signature match
Checksum match
UserStorageSIPreload ++
After that device should boot WM6 again, you can now re-enable USB connections in activesync and flash HardSPL
Click to expand...
Click to collapse
Good Luck
Ahhh!
I didn't find it in the Kaiser forum, but in the Hermes wiki!
Seems that I just had to connect via mtty (to USB, not a COM port! ) then just issue a: set 14 0
Then did a soft reset and all was well!
Back in business!
Now, maybe I'll start playing with some ROMS!
Thanks again!
-RT
hello i have the same problem after i tried to sim unlock my mda vario iii i tried to do what you proposed but didn't work this is what i get when i tried to boot from mtty
Fill RSVD information for block 288 to 309
TAG NOT FOUND !!! NOT CLEAR STORAGE !!!
No card inserted
OEMIPLInit clear 10MB ext RAM
OEMGetUpdateMode
FMD_ReadSector+, bad block no=0x15440, status:0x0
FMD_ReadSector+, bad block no=0x15440, status:0x0
FMD_ReadSector+, bad block no=0x15440, status:0x0
IPLMSG:0x2:ERROR: Failed to open storage partition.
i would apreciate if you can help me
Stuck in Bootloader
Hi everyone,
I tried using MTTY.exe on a XP machine. The option for USB shows up but when i type the command "boot" i get command error. Please help!
KAIS130
SPL-1.93.0000
CPLD-8
on the right top corner the tri-color screen displays RUUNBH
I tried HARD-SPL / gets stuck on 0% and the RUU goes into recovery mode later. Tried stock ROM (Invalid ID).
eddiesantiago said:
Hi everyone,
I tried using MTTY.exe on a XP machine. The option for USB shows up but when i type the command "boot" i get command error. Please help!
KAIS130
SPL-1.93.0000
CPLD-8
on the right top corner the tri-color screen displays RUUNBH
I tried HARD-SPL / gets stuck on 0% and the RUU goes into recovery mode later. Tried stock ROM (Invalid ID).
Click to expand...
Click to collapse
should've read further. You'd of seen my post on Different SPL's & their different command capabilities.
For 1.93 SPL you can issue cmd>task 8
You need to install hardSPL once you get it going, because you DON'T have it know.
GSLEON3 said:
should've read further. You'd of seen my post on Different SPL's & their different command capabilities.
For 1.93 SPL you can issue cmd>task 8
You need to install hardSPL once you get it going, because you DON'T have it know.
Click to expand...
Click to collapse
Thanks for your response GSLEON3
I followed your instructions and used the Task 8 command for the 1.93 SPL
The device turn off and comes back to the same Tri - color screen with RUUNBH on top right. Tried flashing Hard-SPL stuck on 0%. Please help
Anything you found eddiesantiago ?
Hi eddiesantiago,
did you find any solution to your problem, i have a similar issue.
My Tilt Shows :
KAIS1*0
SPL-1.93.0000
CPLD-8
on the right top corner the tri-color screen displays RUUNBH
Please reply if you got it fixed.
TIA,
Dhaval.
same issue
My tilt shows the same info here, is this normal? I need to verify this before I send my TILT back to ATT...
Thanks
The issue is back, I recently bought a new device and I cannot HardSPL it. Many ppl are having this problem. Is it cause the device is new?? Can someone think of a way to fix it?
Related Links:
HardSPL will not install - WHITE SCREEN: SOLVED - http://forum.xda-developers.com/showthread.php?t=354061
HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free) - http://forum.xda-developers.com/showthread.php?t=334679
Someone?????????????
xmoo said:
The issue is back, I recently bought a new device and I cannot HardSPL it. Many ppl are having this problem. Is it cause the device is new?? Can someone think of a way to fix it?
Related Links:
HardSPL will not install - WHITE SCREEN: SOLVED - http://forum.xda-developers.com/showthread.php?t=354061
HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free) - http://forum.xda-developers.com/showthread.php?t=334679
Click to expand...
Click to collapse
Are you saying the info at:m http://forum.xda-developers.com/showthread.php?t=354061 does NOT fix the problem?
A friend of mine in Los Angeles had the same problem with his boss' new Tilt but was able to get it fixed with that information. I think I read somewhere that Tilts made withina certain time frame and with certain serial numbers are subject to this phenomenom. Sorry, can't point you to the exact forum.
JPIndustrie said:
MikeLim/JockyW,
I think I have the same exact issue. I'm on my 3rd North American ATT OEM Tilt, and I have the same exact symptoms that MikeLim talked about.
Tried your fix (with the SIM/MicroSD removed) and all i get is the WSOD, with ActiveSync timing out, and "windows Mobile-based device #7" in Device manager (with the same exact ID's).
Any ideas?
Thanks
Click to expand...
Click to collapse
Wonder_Man said:
I am having the same problem, when using JumpSPL it simply hangs at the white screen, it never continues to the tri-color screen. From what I read, only JumpSPL needs to be on the phone, then loaded through the phone menu. I get a white screen, and disconnected on activesync. Is it possible to continue install (disconnect usb,reconnect usb, installing HardSPL) without seeing the tri-color screen? Or am I babbling like my mother on a long distance call?
Click to expand...
Click to collapse
I posted that in the old thread yesterday, I recently got my Tilt about 3 weeks ago. I too cannot get past the WSOD. I didn't want to start flashing until I was sure that you could still do it with the WSOD on screen.
Same problem here and mine is about 2 weeks old.
Anyone with a brand new tilt(less than a few weeks old) have success getting past the white screen?
SPL v1.5 ???
Same for me white screen ... 09/08/07 RB01/EU
The new device I have bought is diffrent than the one I bought 2 days after it's release.
The new one is a bit thinner, The keyboard keys are slighter (No click sounds). Video is working better (NOT FULLY). So think that is the issue, new device new spl needed.
Ok so we need wait the new SPL
darko91 said:
Ok so we need wait the new SPL
Click to expand...
Click to collapse
Think so, or we doing something wrong (Don't think so, i've SPl'd like 5 devices the same way, but this one is special).
I once posted SSPL 1.93 for testing here (no security bypass yet, only to see if it runs and if you can connect by mtty). Someone should try it.
When i use your i have the Tricolor stuff ...
and
KAIS130
SPL-1.93.0000
CPLD-8
But not the USB on the bottom
But i'm @ work i cant test mort now ...
That's at least something. And you didn't have tri-color screen with any of the other SSPLs (pof, my 1.56, etc) ?
No with the 1.56 i had the White screen ... Nice white anyway
Try the attached SSPL. It is again a test version, only to see if it shows tri-color and if there is USB connectivity. Don't try to flash HardSPL with it.
1. copy it to your device and run it
2. tri-color screen should be shown and after a moment the word "USB" should appear
3. unplug and replug USB cable and see if you can connect with MTTY or if that is a problem check in device manager if there is a USB Microsoft Sync device at the end of the devicelist
EDIT: I just fixed a small bug. The attached version works fine on my Kaiser.
why cant try flash the spl ? is it dengerous ? ...
darko91 said:
why cant try flash the spl ? is it dengerous ? ...
Click to expand...
Click to collapse
DON'T FLASH IT
Only test if this SSPL (aka JumpSPL) shows tri-color and offers a working USB.
Once that is confirmed I can add the security bypass patches so you can flash a HardSPL.
Im finely back to home ...
I try your SSPL ... but allways same thing ... stuck on Trycolor no USB on the bottom ...
darko91 said:
Im finely back to home ...
I try your SSPL ... but allways same thing ... stuck on Trycolor no USB on the bottom ...
Click to expand...
Click to collapse
What version is your installed SPL ?
If you start it, make sure that the USB cable is connected!
That work USB is ok !
I made a mystake i have start the program without the USB plug ...
Windows say to me after the replug new device found ex..... .....
Hi All,
I have been trying to unlock my T-Mobile MDA Vario 3, after repeated trials I managed to copy SSPL-KAIS.exe onto the Device, started it, then unpug and plug back the USB.
Then I followed the instructions and the flash update process started, this went up till 95% complete, then it failed with an update error.
Now when I reboot the device I get a tri colous display which says the following by the top left hand corner:
Kais 130
SPL-1.56.0000
CPLD-8
At the bottom it says Serial, then if a USB is connected, it sasys USB. If I try to run the flash again, this time around it is stuck at 0% and eventually returns an update error.
Any help will be much appreciated.
Thanks
Please ask in the thread discussing the unlock method you are using.
Hi everyone,
I tried using MTTY.exe on a XP machine. The option for USB shows up but when i type the command "boot" i get command error. Please help!
KAIS130
SPL-1.93.0000
CPLD-8
on the right top corner the tri-color screen displays RUUNBH
I tried HARD-SPL / gets stuck on 0% and the RUU goes into recovery mode later. Tried stock ROM (Invalid ID).
There are threads covering your situation already, search for them then read them. If you still are stuck then post in one of them.
Before someone comes and flames me for creating a new thread (*hide from DaveShaw*) let me explain:
I have created a Wiki page for users who are stuck at the SPL (a.k.a Bootloader, Tri-Colour screen etc.):
Kaiser_stuck_at_bootloader
This has helped out a number of users who have become stuck at the SPL but every day I see more and more users getting stuck and creating new thread, or going off topic in other threads.
What to do if you get stuck:
Read the Wiki Page and follow the advice: Kaiser_stuck_at_bootloader
If you have tried all the steps in the wiki and still have a problem, read the feedback from other users in this thread and any advice I give out in this thread.
If you are still having problems please post all the details you can about what you have done and what version ROM / Radio / SPL you are running in this thread.
Credits:
Everyone I credited in the Wiki page.
mrdo who followed my advice and donated.
P1Tater for stickying this thread.
cmonex who seems to teach me something each day.
Thanks
Dave
Nice thread. Worth a sticky since it seems to be happening quite frequently lately
P1Tater said:
Nice thread. Worth a sticky since it seems to be happening quite frequently lately
Click to expand...
Click to collapse
Thanks to much I have learned from Master Jocky_W, I am currently working on hacking o a couple of Jockey's new HardSPL's into MFG variations. This will allow for the checking, formatting & fixing of OS flash memory blocks.
I am just about done I think, & then off to Jock it will go for his comments & keen eye.
GSLEON3 said:
Thanks to much I have learned from Master Jocky_W, I am currently working on hacking o a couple of Jockey's new HardSPL's into MFG variations. This will allow for the checking, formatting & fixing of OS flash memory blocks.
I am just about done I think, & then off to Jock it will go for his comments & keen eye.
Click to expand...
Click to collapse
Nice one, I was thinking MFG 3.* HardSPL would be good, but I assumed there was a good reason for them not to exist. Little did I know that's where you were hiding
Great work.
Dave
Good idea with this thread, congratulations.
Just to add something useful for the thread, here is my tip: (for n00bs, or a "newbie-n00bs" since I consider myself a n00b too )
No matter what, DON'T PANIC.
If your phone boots at least partially (the bootloader starts and shows R/G/D versions) maybe its not that bad
I've flashed few times "bad ROMs" and my phone stucked on bootloader. Luckily none of them was that bad that I couldn't recover from it.
What I do first:
disconnect the phone from anything you had it connected to,
and go into bootloader mode (camera button + reset with stylus).
It will show the tricolor+white screen, SPL version on the top and "Serial" at the bottom.
Plug in your USB cable.
If the "Serial" will change into "USB" at the bottom, you are most likely ready to fix the problem
- so flash your phone with new clean ROM now (I would go with clean stock ROM including radio as well)
oh, and don't worry about the ActiveSync info that may be displayed by the RUU app, because you are already in bootloader mode (RUU or KaiserCustomRUU etc, at first disconnects AS in order to set your phone in bootloader mode, thats why the warnings about AS being "green" etc)
HTH
this one isn't covered!
I go right to bootlader and see RUUNBH upper right!
my SPL is 3.56.hard
CPLD-8
I would flash my stock rom BUT i cant get a usb connection to work at all!
mtty doen't work at all!
hmm?!?!?!??
HELP, please!
OrrinS1189 said:
I go right to bootlader and see RUUNBH upper right!
my SPL is 3.56.hard
CPLD-8
I would flash my stock rom BUT i cant get a usb connection to work at all!
mtty doen't work at all!
hmm?!?!?!??
HELP, please!
Click to expand...
Click to collapse
Does "USB" show in the bootloader when you connect the USB plug or not?
Dave
yep
yes, those words DO change. But nothing can be done on my PC.
OrrinS1189 said:
yes, those words DO change. But nothing can be done on my PC.
Click to expand...
Click to collapse
Have you done the following to get MTTY to work?
* Download mtty.exe
* Disable activesync (connection settings -> uncheck "allow usb connections")
* Connect your Kaiser to PC using USB cable.
* Open mtty, select USB port and click OK.
* Hit ENTER twice, you should see the "Cmd>" prompt.
* Type the command "boot".
Are you using Vista or XP?
Dave
yes again!
i have disabled usb connections through active synch and killed ALL the mobile processes through task mngr. Still, usb port cannot be opened through mtty!
it's crazy! =[
also, when i plug in my tilt, i get a beep beep beep from my PC saying failure to cconnect to hardware. =[
VISTA!!!
OrrinS1189 said:
i have disabled usb connections through active synch and killed ALL the mobile processes through task mngr. Still, usb port cannot be opened through mtty!
it's crazy! =[
also, when i plug in my tilt, i get a beep beep beep from my PC saying failure to cconnect to hardware. =[
VISTA!!!
Click to expand...
Click to collapse
I'm leaving work now, but can you trying flashing your carrier ROM from the SD card, that might do it.
Also, try the attached MTTY.
If that don't work, can you find a Windows XP Machince and try the normal MTTY method.
Dave
No Luck
Since I can't establish a usb connection I have no way of getting ANYTHING to my tilt.
I can't access my SD card.
MTTY says command error when I say boot.
I don't think MTTY is connecting.
Does my SPL need to be changed?
If so, how do I change it if I can't get a connection to my tilt at all?
I GOT IT!
i TOOK your advice to flash from my SD my naming a rom KAISIMG.nbh and using my PC to put on card. then i just entered bootlader. I flashed a random new rom (not at&t) and it worked in restoring my phone.
I didn't use a stock rom cause my spl didn't match. thanks for all your help man.
OrrinS1189 said:
i TOOK your advice to flash from my SD my naming a rom KAISIMG.nbh and using my PC to put on card. then i just entered bootlader. I flashed a random new rom (not at&t) and it worked in restoring my phone.
I didn't use a stock rom cause my spl didn't match. thanks for all your help man.
Click to expand...
Click to collapse
Glad you got it working.
Dave
good thread
BTW, if you do not have the RUUNBH on the screen, but can't get OS to boot and you didn't flash my patched SPL's for prevention, I now have a solution for those too in my thread (also sticky, so easy to find).
cmonex said:
good thread
BTW, if you do not have the RUUNBH on the screen, but can't get OS to boot and you didn't flash my patched SPL's for prevention, I now have a solution for those too in my thread (also sticky, so easy to find).
Click to expand...
Click to collapse
Thanks for this.
I have added this to the Wiki Page. Which I may re-write later to be a little more clear.
Dave
I have re-written most of the Wiki Page to be more than a collection of random Links. It took over an hour, to get right, so please read it.
Now there's really no reason to get stuck.
Thanks
Dave
DaveShaw said:
I have re-written most of the Wiki Page to be more than a collection of random Links. It took over an hour, to get right, so please read it.
Now there's really no reason to get stuck.
Thanks
Dave
Click to expand...
Click to collapse
nice update! really useful to all kaiser owners.
btw, you wrote:
"This method will not work if RUUNBH is showing and cannot get the OS to boot even once"
I removed second part if you don't mind, the method doesn't need that as a requirement. (and it will actually unset RUUNBH flag too if the loading of the special SSPL and the flash is successful, but for RUUNBH issue this solution is overkill, because for that "set 16 0" is fine.)
cmonex said:
nice update! really useful to all kaiser owners.
btw, you wrote:
"This method will not work if RUUNBH is showing and cannot get the OS to boot even once"
I removed second part if you don't mind, the method doesn't need that as a requirement. (and it will actually unset RUUNBH flag too if the loading of the special SSPL and the flash is successful, but for RUUNBH issue this solution is overkill, because for that "set 16 0" is fine.)
Click to expand...
Click to collapse
Thanks cmonex, I don't even know what that senence means, I wrote it after midnight last night, and I really can't recall what I was thinking.
Cheers
Dave
First, I’m using the ROM L26KDV12. I used the tweaking program that comes with the ROM and I hit done, the phone said to restart the device to get effective or cancel to restart later but I choose to restart the device. So, the Phone restarted and I stuck in bootloader mode.
I tried to re-flash my ROM L26KDV12 and I got the 100% result in the screen but when I restarted the device it was stuck again in bootloader mode. I tried to update the Radio but got no luck also.
So I decided to update the ROM via MicroSD(Dutty’s Diamond V1.9) and I got 100%(complete result on the screen again) but when I did the last instruction of updating the ROM via MicroSD(to restart the device), my phone goes off and I can’t open anymore..
Please I need help..