Someone know if the web www.mobytube.net has restricted access to youtube? ever was work fine to see youtube videos with mobile devices from this web, but unknow why from some days a go, is impossible to connect with tcpmp from www.mobytube.net to www.youtube.com
If has restricted access is a f**k problem to all people that only can use this web to see youtube videos.
bump
can someone test if is a general error?
Thx.
ekimalde said:
can someone test if is a general error?
Thx.
Click to expand...
Click to collapse
--------------------BUMP
Use Core player, it is much better than TCPMP.
oqaab said:
Use Core player, it is much better than TCPMP.
Click to expand...
Click to collapse
My version of core codec player dont support flv video.
Related
Is video playback on an AT&T Tilt horrible no matter what player I use or what files I play? If not can anybody help me out with a player with AVI support that doesn't run so slow. Is this even possible right now with current drivers like the classaction and omnia?
Have you tried Divx Mobile or Kinoma Freeplay?
mcjewpants said:
Is video playback on an AT&T Tilt horrible no matter what player I use or what files I play? If not can anybody help me out with a player with AVI support that doesn't run so slow. Is this even possible right now with current drivers like the classaction and omnia?
Click to expand...
Click to collapse
You didn't say what hardware you had, but I use Kinoma for most of my media, and it works well, but doen't do AVI, so I dl'd Divx mobile to handle those. Both run very smooth for me.
the best for me is Smart Player.
it does work best if you reencode movie on your PC using the Smart converter
no speed probs or sound sync probs..
i have tried many but this is superior and i watch full length movies..
Well, that's because of lack of complete drivers in your device, you can find lots of information in this forum about it.
The only player I know that take advantage of video hardware acceleration for your device (QTv) is Coreplayer.
Drakh said:
Well, that's because of lack of complete drivers in your device, you can find lots of information in this forum about it.
The only player I know that take advantage of video hardware acceleration for your device (QTv) is Coreplayer.
Click to expand...
Click to collapse
Tried out coreplayer and it seems to work best, alot better than DivX or WMP10, I think this is the one for me
Is there a good media player for Windows Mobile? I'm looking for something that will play avi & flv etc.. formats.
I use Windows Media PLayer Clasic and VLC player which plays all formats... Can someone please recomend me somehting please...
or, where can i download all the codecs for Windows Mobile?
thanks.
Coreplayer
CorePlayer or TCPMP
I'm using CorePlayer v1.3.6 build 7427 and it plays all major formats of video and audio.
The only problem i have is that my Moto S9 HD stereo bluetooth headphones don't work with CorePlayer only the volume buttons. If I can get this to work then it would be perfect. I have to use WMP if I want to use my BT headphones.
Please be aware that Coreplayer does not support video files with AC3 audio. This can be a big problem sometimes. TCPMP ( the freeware player) that Coreplayer was based on does.
for some reason, i cannot get TCPMP to work on Windows MObile 6.1.. any help?
which cab do i use for Windows Mobile 6.1? The Smartphone or PPC or Other?
Windows Mobile CAB
tcpmp.pocketpc.0.72RC1.cab
tcpmp.smartphone.0.72RC1.cab
tcpmp.other.cabs.0.72RC1.zip
wineds said:
Please be aware that Coreplayer does not support video files with AC3 audio. This can be a big problem sometimes. TCPMP ( the freeware player) that Coreplayer was based on does.
Click to expand...
Click to collapse
what version of TCPMP are you using with WM6.5? Also, have you tried the latest version of CorePlayer v1.3.6 build 7427? I don't seem to have any issues with it so far.
i'm looking for a free player... I have to pay for CorePlayer
i'm pretty sure i sent you a private message with alternatives to Core Player and links. have a look.
thanks everyone for replying!
Drag-On said:
i'm pretty sure i sent you a private message with alternatives to Core Player and links. have a look.
Click to expand...
Click to collapse
You could post it here for all who are intersted (like me) Drag-On
Drag-On said:
i'm pretty sure i sent you a private message with alternatives to Core Player and links. have a look.
Click to expand...
Click to collapse
So you basically sent links to cracked CorePlayer? Great..
ArtieQ said:
So you basically sent links to cracked CorePlayer? Great..
Click to expand...
Click to collapse
no, alternatives. like many that were mentioned in the previous posts. i just sent him a pm, so as to make it simpler for him to follow instructions (not knowing his ppc/pc literacy level)
in closing, i DO like coreplayer, i just think it's to much money for something that TCPMP does well.
Yo guys. i have installed both players on my leo. i like the tcpmp player the best because you can have ac3 plugin and subtitles. BUT its like it plays with a lower framerate than coreplayer? the fact is that movies exactly feels a bit too laggy so it gets annoying when watching on the tcpmp player. any know why or maybe got a solution?
regards alf
Same dilemma for me...
...
any got a solution to the laggy tcpmp?
Alfetch said:
any got a solution to the laggy tcpmp?
Click to expand...
Click to collapse
there is no solution. coreplayer comes later and it's more optimized, but it doesn't have ac3 and subtitles support. Give and take....
just to add to the debate, this hd2 which I'm writing from, during a benchmark on tje opening of sex&the city, had 170+% speed in coreplayer, and 90-% in tcpmp...looks prety normal to me, asv previous poster sais, coreplayr developent went on, while tcpmp has stopped some years ago
a little OT question...what type of subs tcpmp read? because i tryed with tons of SRT but i dont understand how to let theme works
http://forum.corecodec.com/viewtopic.php?f=4&t=155
That thread talks of AC3 support via a purchasable plugin, confirmed as being in development by one of the developers back in 2007. However, it constantly got put back by the look of it until in the end the thread was locked after a very good point regarding the lack of a Coreplayer demo by the last poster. Shame.
Alfetch said:
any got a solution to the laggy tcpmp?
Click to expand...
Click to collapse
I think it's a problem related to the use of cpu. If you launch tcpmp just after a boot (before it scales down to about 400 Mhz) you'll see that it is faaaast (yesterday I used this method to watch a 960x400 divx AC3). It remain fast as long as you don't leave the phone to go to rest...
I usually use Coreplayer, this method when I have a movie with subtitle or AC3
xardus said:
a little OT question...what type of subs tcpmp read? because i tryed with tons of SRT but i dont understand how to let theme works
Click to expand...
Click to collapse
You have to use the right version and use GDI (if I remember correctly) as video driver.
Srt are ok, with older versions you had to use smi files (you could use subtitle workshop to convert them)
Check this thread for a TCPMP player that works fine on HD2
http://forum.xda-developers.com/showthread.php?t=631061
Check this thread for a TCPMP player that works fine on HD2
it also supports subtitles
it works ok, wothout a single modification to the player settings
mehegazy said:
http://forum.xda-developers.com/showthread.php?t=631061
Check this thread for a TCPMP player that works fine on HD2
it also supports subtitles
it works ok, wothout a single modification to the player settings
Click to expand...
Click to collapse
thx a lot bro
Is there any video player that can play .flv files?
It seems after flv files are converted to mp4 audio/video is out of sync for the HD2 video player, so I'd like to know is there any good video player that can be installed and thanks!
having same problem
gtb5 said:
Is there any video player that can play .flv files?
It seems after flv files are converted to mp4 audio/video is out of sync for the HD2 video player, so I'd like to know is there any good video player that can be installed and thanks!
Click to expand...
Click to collapse
i have a same problem foe playing and watching movie files that have a .flv type. and now idont know what can i do for this
Try this soft to convert FLV to AVI
Coreplayer or the free version TCPMP will both play FLV files.
Hello, I'm using ( Aimersoft Video Converter ) and the profile of the iPhone 3GS the quality is brilliant and very very smooth , try it and give me a reply , i've been using it since i bought the HD2 and i just love it !
Hope it will work for every one of U .
Hanybv
colthekid said:
Coreplayer or the free version TCPMP will both play FLV files.
Click to expand...
Click to collapse
+1 for coreplayer or TCPMP. Why take the time to convert videos when you can simply play them?
I bought coreplayer ... It's the one for me and a good prize too
Tried coreplayer and it's having problem in my unit, the video will be messed up and has to restart don't know why.
This video converter is very good, with the ability to re-sync audio (not that I have needed to yet). It was developed for the HD by an xda member. But yeah, TCPMP or Coreplayer will work if you don't want to convert it.
Thanks gotta give it another try.
gtb5 said:
Tried coreplayer and it's having problem in my unit, the video will be messed up and has to restart don't know why.
Click to expand...
Click to collapse
Switch your video codec to DirectDraw then it will work like charm. Look for more tweaks in coreplayer forum.
jokies said:
Switch your video codec to DirectDraw then it will work like charm. Look for more tweaks in coreplayer forum.
Click to expand...
Click to collapse
Oh thanks but please let me know how to change video codec.
COREPLAYER: Menu > Tools > Settings > Select Page > Video > Video Output - change to DirectDraw
TCPMP: Options > Video > DirectDraw
In coreplayer, just make sure that a video is NOT playing when you do this....it tends to crash and forces you to do a soft reset (at least it does for me!)
I have no probs playing flv with coreplayer or TCPMP, I just prefer Coreplayer.
Thanks so much, actually GDI codec works for me but there's still very slight sync issue for some videos.
You may also want to try Chainfire's 3d drivers (if you haven't already)
http://forum.xda-developers.com/showthread.php?t=592663 (not the beta drivers - yet!)
Some people have said it improves DirectDraw performance in Coreplayer, but I never had any problems before, so I can't really say yes or no to that! The drivers do help with other apps too, so I would say they are worth installing anyway.
I think there is a known problem with the HD2 and video/audio sync, but again (lucky me), I've never noticed it.
Col.
How to play YouTube video in WP7?
Do I have to use WebBrowser control or it possible to do using MediaElement?
Thank you in advance!
just download a youtube app and play away?....
Keefo said:
just download a youtube app and play away?....
Click to expand...
Click to collapse
thats not what he means.
you need to find the mp4 link of the youtube video, as mediaelement can only play mp4 and not flv movies.
This probably involves some reverse engineering of how youtube codes its video urls. But there are some tutorials about how to make a youtube player with wp7.
They used direct mp4 links as well.
Good luck.
Marvin_S said:
thats not what he means.
you need to find the mp4 link of the youtube video, as mediaelement can only play mp4 and not flv movies.
This probably involves some reverse engineering of how youtube codes its video urls. But there are some tutorials about how to make a youtube player with wp7.
They used direct mp4 links as well.
Good luck.
Click to expand...
Click to collapse
Thanks Marvin_S, is mp4 format exist for each video on youtube?
DioNNiS said:
Thanks Marvin_S, is mp4 format exist for each video on youtube?
Click to expand...
Click to collapse
no, some youtube videos can not be played on mobile devices
Not dev related, moved to Q&A