Hi
I have Dopod818 and i want to change my ROM version because it is in chinese launguage But when i start phone i can't see any of IPL and SPL Information like all mobile shows at startup . Only it shows Windows Mobile screen at startup.
It is Currently Running on Windows Mobile 5.0 and it shows device information about OMAP 730 .
All ROM version also not working when i am trying to upgrade it . It connect ActiveSync properly.
Any clue ?
Related
Hi,
I' am trying to put another rom on my MDA, but i get no message on the screen from what version to the new version after it get the information from the device.
It's complete blanc it's show nothing on what radio and rom en also the new rom what it's radio and rom.
All this after i run the Maupgradeut-noID.
Plz. help me.
Thnx,
Alfa156
First, you must connect to desktop using ActiveSync, than start Maupgradeut-noID.
Hi,
Maybe I was not explain my problem clearly.
With this picture maybe it makes it more claerly.
After I run MaupgradeUt-NoID I get this screen which it's shown
nothing about which rom version.
And then when I do the upgrade button I get the screen with
"waith untill... and do not disconnect..." this screen stays.
Please somebody help me, I am desperatly.
Thnx,
Alfa156
Hi.
The same happens to me with my new MDA compact II.
I think it is something to with the windows mobile 2005. you will be aware that this device is different from the classic Magician.
Tell me if this is your problem as well.
Hi MKHAIRYM,
My device has not windows mobile 5.
It was working with the windows CE 2003
Thnx,
Alfa156
i'm very very stupid , i have installed my Magician 818 T-Mobile (Compat I) with phrophet.
so.. i can't use my magician anymore.
this is the information have changed
IPL 2.06.0001
SPL 2.G4.4PDA
GSM 02.19.21
OS 5.2.19.48
Now.. I already download form www.t-mobile.com <--- WM5 for 818 compact I
but... i have problem then.
i extract the ROM file, copy MaUpgradeUt_NoID.exe into same folder, changes my 818 to bootloader mode, USB connected (but activesync can't connecting-of course)
Using MaUpgradeUt_NoID.exe it says error i try again and again and again and again.. but.. no result .
now my magician is totally cannot enter the OS , only stop at the Dopod Logo(not the OS logo).
pls help me...
Pls help me, i need to get back OS normal ^^
help me bro...
-Jakarta-
jeaqueline said:
i'm very very stupid , i have installed my Magician 818 T-Mobile (MDA I) with phrophet.
so.. i can't use my magician anymore.
this is the information have changed
IPL 2.06.0001
SPL 2.G4.4PDA
GSM 02.19.21
OS 5.2.19.48
Now.. I already download form www.t-mobile.com <--- WM5 for 818 MDA I
but... i have problem then.
i extract the ROM file, copy MaUpgradeUt_NoID.exe into same folder, changes my 818 to bootloader mode, USB connected (but activesync can't connecting-of course)
Using MaUpgradeUt_NoID.exe it says error i try again and again and again and again.. but.. no result .
Pls help me, i need to get back OS normal ^^
help me bro...
-Jakarta-
Click to expand...
Click to collapse
Hey dude..bit more info might b nice...what error is it saying? connection error? or ROM error? or what?.. and if it's connection, what OS u running? you need special drivers for the Magician if you're running Vista..
Try unplugging you battery then plug it back - press power button - it will work but just until you press reset. And no more upgrades
jeaqueline said:
i'm very very stupid , i have installed my Magician 818 T-Mobile (Compat I) with phrophet.
so.. i can't use my magician anymore.
this is the information have changed
IPL 2.06.0001
SPL 2.G4.4PDA
GSM 02.19.21
OS 5.2.19.48
Now.. I already download form www.t-mobile.com <--- WM5 for 818 compact I
but... i have problem then.
i extract the ROM file, copy MaUpgradeUt_NoID.exe into same folder, changes my 818 to bootloader mode, USB connected (but activesync can't connecting-of course)
Using MaUpgradeUt_NoID.exe it says error i try again and again and again and again.. but.. no result .
now my magician is totally cannot enter the OS , only stop at the Dopod Logo(not the OS logo).
pls help me...
Pls help me, i need to get back OS normal ^^
help me bro...
-Jakarta-
Click to expand...
Click to collapse
hey dude this dopod logo is really an irritating prob u knw wat jus do a hard reset once n den try coz dopod logo take long long time to go n enter the boot loader mode..
so jus giv it a try i hope it works for u ..
Regards Chigz..
Hello,sorry I'm not too expert, but I've tried to upgrade my qtek 2020 from windows mobile 2003 to WM5 following instructions that i've found on this site, but I've got a big problem. When himaupgradeut_noID start after some minutes it gives me the following message: Error 101: connection error.
My qtek 2020 remain with the Serial (when it is out of the cradle) or -- USB (when it is on the cradle) black screen (v 1.06) and nothing happens... I've tried to reset it pressing the power and reset button but it remains on the same black screen!!
Please help me what could be the problem? What should I do? It seems to be a communication problem with the usb but before starting the upgrade Active sync was running ...
Thank you for your help
imate phone edition upgrade for model ph10b
Hello, i have an imate ppc (the phone edition),,,i cant find an upgarde for my ppc,,, can anybobody help me pls...i tried the upgrade for xdaII that i got from this site.... but it does not work when i installed it ,,,,i would appreciate it if somebody could give me a guide to where to find the upgrade download for my ppc...the only program that work for my ppc is the pointui home,,,,,i also tried to install a phone pad,,,and it didnt work as well....it is sometimes difficult to do a text msg,,,,with the keybord... specially if i am on my way to work,,,,
please help me to upgrade my imate phone edition,,,,
thank you for your help...
any guide I could give would only be a directly
copy paste of the readme in the zip file with the rom upgrades
wm5 wm6 wm6.1 same deal same readme
While booting my htc neo showing a screen which contains:
IPL 2.15.0001
SPL 2.G4.4PDA
GSM 02.47.21
OS 2.20.7.35
My problem is I cant upgrade my prophet. I have tried more than 7 - 8 different roms but everytime its showing connection error . and trying to recover the updradation process. please help me.
more details
Hi,
Can you give some more details like what OS you have in PC, does it show USB in the left corner of the phone.
Regards,
V.Balaji
Hi,
I replaced the SPL on a Chinese dopod S900 (same as HTC Diamond) using SPL-1.40.OliNex. Ever since, the installed Windows Mobile 6.1 stops with a Chinese error message which I cannot decipher.
I've tried replacing the SPL with the stock one, but this doesn't seem to work. RUU / Active Sync works when I reset the device and push the volume down to display the SPL screen - the progress indicator goes up to 100% and device resets, but SPL doesn't actually change.
Is there any way I can reload the stock SPL to get Windows to boot properly again or any way to load a different OS version (or even Android)?
Thanks for your help.
Regards
Johannes
I managed to flash a German ROM using Active Sync after booting into the SPL (reset with volume down pressed).
I still have the same "problem" in Windows now. It displays a message and doesn't seem to do anything, but I can read the message. It says something about the phone being initialized. So everything is working fine!
I guess if you have a Chinese phone it helps if you know some Chinese...