Hi all,
I own a polaris. however i am new to customizing the same. I need your guidance in Manila installation.
I downloaded the new iolite version but it doesnot have any cab file.
I then downloaded the elfin version and the installation was UNSUCCESSFUL because it says "the system doesnot have all the permissions".
I wish to to know step by step to install Manila 2d.
PS I have installed M2DC already and it needs manila 2d Setting file to run.
Please point to the CAB file and the installation process.
I would also really appreciate if you could please let me know on how to install Manila themes on Polaris.
Thanks
Ankit
HI,
To install the Iolite version and have full functionality, you need to unzip and install all the cabs other wise certain tabs wont function correctly.
The cabs take up a fair amount of space, so a very clean rom is advisable.
Wot might be better for you is to flash a ROM that has m2d cooked in, id advise trying the full version of 3LIT3 VI rom from here : http://forum.xda-developers.com/showthread.php?t=459826
Firstly though, please read the wiki from here : http://wiki.xda-developers.com/index.php?pagename=HTC_Polaris
There is a lot of good advise on here and describes what you need to do to sucessfully flash a cooked ROM.
Only do it when you have read a couple of time and understand what you are doing. THen download everything you need, from Hardspl, rom and radio if needed. Backup you contacts and emails using PIM Backups found on XDA.
Backup anything else you need, but bear in mind you cannot restore a backup from one ROM to another.
Follow the advise given and you should have a hassle free flash
Good luck and enjoy your new freedom.
ps the ROM i mentioned above is very good and i cant find any problems with it.
Thanks for the help
Hi Timmy,..
Thanks for the advice., I have installed the ROM mentioned above by you. Looks good.
Could you please tell me how to install new Manila 2D skins? If i download the skins from the thread, it is a zip file. How do i install them on my cruise.
Thanks
Ankit
Hey there,
Well you need M2DC from here : http://forum.xda-developers.com/showthread.php?t=427392
There are lots and lots of m2d themes which you can search for of course, but there is a link on the first post of the above thread. Have Fun!!!!
ankitjain1983 said:
Hi all,
I own a polaris. however i am new to customizing the same. I need your guidance in Manila installation.
I downloaded the new iolite version but it doesnot have any cab file.
I then downloaded the elfin version and the installation was UNSUCCESSFUL because it says "the system doesnot have all the permissions".
I wish to to know step by step to install Manila 2d.
PS I have installed M2DC already and it needs manila 2d Setting file to run.
Please point to the CAB file and the installation process.
I would also really appreciate if you could please let me know on how to install Manila themes on Polaris.
Thanks
Ankit
Click to expand...
Click to collapse
heyy u have to search the net(google) for a manila 2d rom for ur device
and then install it u can get istructions on the net for the installation
Related
Read end of post for updates .. Thank you .......
====================================
WM2005 AKU3.5 by LLBASHA
ROM: 3.50pp16a1
dated: 02.02.2007
OS 5.1.195 (Build 15698.3.5.0)
RamDisk 48mb
PagePool 16mb
Storage 30.53mb
Program 61.29mb
For Himalaya PH10B (XDAii MDA2 Qtec2020 Imate Pocket PC)
=============================================
Hi everybody,
This is, I guess, what MANY, I believe, is looking for.
A good clean stable and fast WM5 rom based on AKU3.5 that you can change easily to your liking... right?
Well, your wishes come true. Here you will find my new ROM, the tools, and procedure to modify it!!!
It does NOT include ANY personal info.
It include clean original splash screen theme
It includes lots of Today-plug-in that you can disable if you do not want (disabled by default).
Modifications involve, beside adding & removing files, changes of hklm.reg, hkcu.reg, default.hv, and system initflashfiles.dat files. The ROM has been optimized to the extremes, hence if you decided you want to modify it please make sure what ever you add MUST be less or equal to what ever you delete.
It took me continuous 10 days of work and 8 flashes to get this procedure and ROM right.
I have tested the room and it works perfect ... however, please forgive me if I have overlooked something.
Note: I suggest you test the rom BEFORE you install any extra programs of your own ... and then again AFTER installation... so you can determine the source of the problem or the violating program, if any.
If you want to automate the installation of additional programs, stick the cabs file in the ExtROM directory in the SD-card and edit the config.txt accordingly.
To use the modification tools, just drop your favourit NK.NPF file in the RomEditor directory and click on steps 1 to 7 and follow the prompt.
It could not be easier ... Well, is it??? You will soon find out!!!!!!!!!!
Final word of thanks to tjlabais for his detailed tutorial, scripts and support. Many thanks to Mamaich for his incredible tools, as well as to Helmi_c, Buzz_lighter, Tofclock, and all those who contributed indirectly or in the past to get WM5 working on our Himalaya.
http://www.megaupload.com/?d=6FCT36YH
Filesize: 27.96 MB
Filename: llbasha-WM5-AKU35pp16a1.rar
Description: llbasha Himalaya WM5-AKU35pp16a1
Good luck and enjoy.
LLBASHA
Note: You can refer to tjlabais original tutorial here:
http://buzzdev.net/index.php?option=com_phorum&Itemid=125&phorum_query=read,26,27196,page=1
-------------------------------------------------------------------------------------------------------------------------------
Edit1: Guys, please note I did not invent the wheel here!!! I only picked already existing work and put it into organized specific working method with example (my rom). So please no nag where did I get this or that from. What I am giving you here is next to perfect ROM that you CAN edit to suit your own taste.
Edit2: This method is NOT for new users - noob. It is NOT like the kitchen method. Also, question about the tools should be posted in the original thread by tjlabais.
Edit3: If you have problem download from MegaUpload, use this one: http://www.4shared.com/file/10238126/881bdc5f/llbasha-WM5-AKU35pp16a1.html?s=1
Edit4: Copy this file: \windows\iexplore.lnk to to here: \Windows\Start Menu\Programs\iexplore.lnk
Edit5: If you have slow startup or problem delete this file: \Windows\StartUp\psShutXP.lnk
Edit6: I got report of 500+ downlaods and 2000+ views bu no reports here on anything. Please file in your actual experence so others can benefit, regarding the ROM itself or the RomEditor tools. Thank you.
Edit7: Changing ramdisk size from registery only is not sufficient to pass the difference to program. New versions shall be released soon with different ramdisk size, but will keep 16mb pagepool.
Edit8: an new update rom version with 96mb program 16 ramdisk 16 pagepole
has been posted here:
http://forum.xda-developers.com/showthread.php?t=294016
New Version here
WM2005 AKU3.5 by LLBASHA
ROM: 3.50pp16A2
dated: 13.02.2007
OS 5.1.195 (Build 15698.3.5.0)
RamDisk 48mb
PagePool16mb
Storage 30.53mb
Program 64mb
For Himalaya PH10B (XDAii MDA2 Qtec2020 Imate Pocket PC)
This version is basically a simple update. Changes from version 3.50pp16a1
Removed SpeedDial and InternetCachiClean
Added cLaunch (great free today plugin)
Fixed startup delay caused by psShutXP
Fixed links and arranged icons in folders.
No known problem has been reported after intial version 450 downloads
Filesize: 28.0 MB (29,410,652 bytes)
Filename: llbasha-WM2005-AKU35pp16A2.rar
Description: llbasha Himalaya WM2005-AKU35pp16A2
Download links:
http://www.megaupload.com/?d=GVFL6OJD
http://www.4shared.com/file/10571804/ce7f3d8c/llbasha-WM2005-AKU35pp16A2.html
I have uploaded an alternative version, details of it you can find it here:
http://forum.xda-developers.com/showpost.php?p=1168356&postcount=79
It is not an upgrade to above but rather a special version custom made requested by some members.
Total download to date 3100+
Enjoy
llbasha
--------------------------------------------------------------------------------------------------------------------------------
llbasha - Latest WM5 using AKU3.5 - more screen shots
Here are some new screen shots
Engjoy
llbasha
THANX A lot
thanx for this rom. U have done a good job cause u had not puted any personal info and non removable applications.
CAN u tell me how can i change sms background as u did
Alternative download from here:
http://www.4shared.com/dir/1965106/cd5aba6f/sharing.html
I hope this works better.
llbasha
does it give also on German ?
Tahnks llbasha
While I'm dowenloading:
1) Do u mean that u include the cooking way in ur uploads?
I read the tutorial u mention and it was not clear for me (as the subject here 4 the Ramdisk and pagepool, by the way thanks 4 the explanation there)
I hope u can find time to make some easy explanation.
The_hesham said:
Tahnks llbasha
While I'm dowenloading:
1) Do u mean that u include the cooking way in ur uploads?
Click to expand...
Click to collapse
Yes, I did put all the cooking tools and steps to take to modify ANY rom to your liking.
llbasha
Question started
Dear llbasha
Please explain more:
In the text file "llbasha-WM5-AKU35pp16a1.txt
5. If you want to change the image/rom version (show on first splash screen bottom right corner), Go to address: 19, 82CDF, 1C1C18
search for old version and replace it with exact number of digits.
6. If you want to change the rom version and date that show when accessing device information from settings, search for the version in unicode, and the date stamp in ANSI.
7- Save your file and run 6ReassembleNPF.bat
[Correction is 7ReassembleNPF.bat]
And
In step no. 2
"When done, remove all HIDDEN attributes for ALL files.
Note: use Registery Workshop as editor for HKLM & HKCU even if nothing changed (not all rom modifications would require registery editing), i.e. open the file and save again irrespective)."
Please explain?
The_hesham said:
Dear llbasha
Please explain more:
In the text file "llbasha-WM5-AKU35pp16a1.txt
5. If you want to change the image/rom version (show on first splash screen bottom right corner), Go to address: 19, 82CDF, 1C1C18
search for old version and replace it with exact number of digits.
llbasha: Open the nk.nba with hex editor... search for the older version you want to change. In my case, I find it at the above addresses. This process change only the image version that you see on first splash screen... ok
6. If you want to change the rom version and date that show when accessing device information from settings, search for the version in unicode, and the date stamp in ANSI.
llbasha: The same version shows also when you start you device, go to settings, device info. To change this, again open nk.npa with hex editor and search for it but in this case search using unicode. To change the date of the version, search for the old version date in ANSI and when you find it change it... OK
7- Save your file and run 6ReassembleNPF.bat
[Correction is 7ReassembleNPF.bat]
llbasha: There is no 6........bat anyway. Thanks
And
In step no. 2
"When done, remove all HIDDEN attributes for ALL files.
llbasha: I suspected that some hidden files may not be picked up by the compiler, so I removed all hiden attributes ...
Note: use Registery Workshop as editor for HKLM & HKCU even if nothing changed (not all rom modifications would require registery editing), i.e. open the file and save again irrespective)."
llbasha: What do you want me to explain? ... please rephrase..
Please explain?
Click to expand...
Click to collapse
I hope this helps
Some Apps like Schekar rom...
Hi,
Is this screeshots from your new ROM?
I think there is some apps like Schekar ROM presente in this new rom.
I've returned to Helmi's rom, just because is almost 100% clean.
Thanks anyway for your work.
zipzop said:
does it give also on German ?
Click to expand...
Click to collapse
Sorry ... This is English ROM but sure there is someone out there who knows how to localize it.
Regards
llbash
superxx said:
Hi,
Is this screeshots from your new ROM?
I think there is some apps like Schekar ROM presente in this new rom.
I've returned to Helmi's rom, just because is almost 100% clean.
Thanks anyway for your work.
Click to expand...
Click to collapse
Yes, above screen shoots are from my rom on my O2XDAii and no one else.
This is clean ROM ... what are you taking about??? Please be specific... What is 100% clean???????????
There was some remaining space in the rom so I filled it with some VERY small today plugin and utilities and are disabled by default. So where is the problem. This remaing space you can't use it anyway once you cocked the rom.
Any I included the tools and steps to remove/add to your liking... So....
Hello Sir,
I will try to use this rom frist.Thank you to much.
sorry
Hello Sir,
After I use it .Almost OK but my Internet exploer icon lost .How I get it back ?
krishan2207 said:
HI
i found a bug.Whenever i tried to open download agent it opens with a blank screen nothing to do in that application so check it out.
Click to expand...
Click to collapse
Where did you get that??????????????
Are you talking about my ROM??????????????
Question started ....contenue
llbasha said:
I hope this helps
Click to expand...
Click to collapse
Dear llbasha
The_hesham: regarding no.5
I search for 19, 82CDF, 1C1C18 as shown ,
Then what to do?
Regarding no.6
6. If you want to change the rom version and date that show when accessing device information from settings, search for the version in unicode, and the date stamp in ANSI.
llbasha: The same version shows also when you start you device, go to settings, device info. To change this, again open nk.npa with hex editor and search for it but in this case search using unicode. To change the date of the version, search for the old version date in ANSI and when you find it change it... OK
The_hesham: Search for what see photo no4 & How to change?
Regarding step no.2
llbasha: I suspected that some hidden files may not be picked up by the compiler, so I removed all hiden attributes
The_hesham: Do u mean to delet all hidden files & which files I suspect it will not be picked by the compiler?
Regarding :
Note: use Registery Workshop as editor for HKLM & HKCU even if nothing changed (not all rom modifications would require registery editing), i.e. open the file and save again irrespective)."
The_hesham: Which workshop as editor & which file to edit?
I'm sorry for to much questions but I did cooking by bepe tools and I want to know about this way.
sorrawut said:
Hello Sir,
After I use it .Almost OK but my Internet exploer icon lost .How I get it back ?
Click to expand...
Click to collapse
Copy this file: \windows\iexplore.lnk
to here: \Windows\Start Menu\Programs\iexplore.lnk
Thanks
llbasha said:
Copy this file: \windows\iexplore.lnk
to here: \Windows\Start Menu\Programs\iexplore.lnk
Thanks
Click to expand...
Click to collapse
Thank Sir,
krishan2207 said:
thanx for this rom. U have done a good job cause u had not puted any personal info and non removable applications.
CAN u tell me how can i change sms background as u did
Click to expand...
Click to collapse
Do you know about HTML, STYLEs, and JAVA scripting???????????
If you do then you want be asking this question, and if you do not know then my answer to you is I do not either!!!!!!!!!!!
You need an expert from Delhi to answer this. Do you know anyone??? May be you can ask him about your 'download agent bug' problem as well.
Thanks
I am using the hypercore kitchen and using its right's TNT.1437 TouchFlo as a base for building off of for my own Rom and I want to replace the standard SMS application with the WM6 Threaded SMS app in Rom instead of having to install a cab file every time I hard-reset.
Basically I want the standard SMS application gone, and the new Threaded SMS app in Rom. I want it to be just like a cab installation but without an actual installation.
Below attached is a zip file for "WM6 SMS Files"
Please someone help me out on this one.
Does nobody know how to do this?
I didn't download the zip file, but if there's a cab in there, just follow the directions in Sambartle's tutorial under the packaging section.
http://forum.xda-developers.com/attachment.php?attachmentid=44308&d=1184780703
I just used these directions today and it works great.
Alternatively, you can also add the cab to the ext ROM. There is a file you add the filename of your cab into and when the customization process starts, it'll auto-install your cab. I haven't yet figured out how to set up an ext ROM so I can't help with that part.
The link doesnt work but its right is helping me with this already. Thanks though.
You would add it to the extended rom.......
How to do this...I'm still...learning myself
dwny said:
You would add it to the extended rom.......
How to do this...I'm still...learning myself
Click to expand...
Click to collapse
There's a tutorial on XDA Ftp made by faria on how to edit the extended rom.
Basically you open the Extended Rom with WinImage, edit the config.txt and update the cabs you want in it.
Pretty easy thing to do.
P.S. You can also find an empty extended rom on the ftp. You can add autorun.exe and config.txt with the cabs you want.
Hi all,
Perhaps it is a newbie question so please bear with me.
I have an i-mate K-Jam flashed with TNT rom (build 20273). It works perfect and nice, however (frankly speaking) I don't like or want some of the APPs installed with this ROM, but I can't uninstall them.
I've searched this forum to find a way to extract the OS (OS only) from TNT rom so that I can flash my wizard and then install all the APPs I want, with no luck. Perhaps my search skills are a little poor...
So would someone please explain if it is possible or not? and if yes, how?
Thanks in advance.
Regards.
You cannot remove apps from a cooked rom. Search for Vanilla roms if you just want the base rom without any extras and then you can install you own apps.
well you can, but for that u'll have to dump the ROM first, remove the apps you dnt like and recook it
you can not dump the TNT roms. when you try, there are no RGU'S or DSM's.
You can dump my rom if you like, but you will get some missing files you will have to put back into the oem.
the missing files come from me not editing the rgu's when I cook.
try dumping Hornet5. for the most part you will get complete packages, but also some "missing files". just put them back into the oem/sys and recook.
Thanks for info. Saved me a lot of time.
I finally managed to cook my own rom. Everything works perfect except that:
1) I've used XIP, SYS and OEM files/folders of different builds. Am I going to have problem later?
2) "CommManager.exe" was missing. I've searched the files used in kitchen and the only thing I found is "commmanager.htm". Later I managed to download and install HTC CommManager but I can't assign in to its button (button 6). Is there any solution for that?
3) How may I extract the "splash screen" from one build, and upload it to my phone?
4) Bluetooth is not working. It says there is no bluetooth hardware on device. Also WLAN disconnects after a few seconds. How may I extract the drivers from original ROM and upload it?
I know the above questions are too much, but actually I'm so excited that my first attempt to cook a rom was successful (almost). I hope one of you experts be kind enough to help me solve the above issues and have a perfect phone.
Thanks in advance.
you will have some problems with the initflashfiles.dat in the oem, as well as the "oemtranslation.prvxml" or something which controls your icons for programs and control panel.
The best thing to do is use the same build OEM SYS & ROM folders.
If you dumped hornet 5, then your best bet ist to work with everything in it. I was working at this rom after Sleurhut for about a month or two.
mixing builds of those folders makes you start from scratch again fixing up your oem again.. and again.
as far as the missing files, try using the Xdump method; or use the searcher on your PC to find the missing files folder and the contents.
Dear S.V.I
Thank you so much for your ongoing support and help.
As I've mentioned before, I'm a total newbie trying to have a clean WM6.1 on Wizard. I've searched and read lots of tutorials here and there, but there are still lots of questions remained.
I tried to play with HyperCore (multi-device) today and I failed in the first step. I've extracted the "nk.nbf" from official i-mate KJam ROM using WinRAR. HyperCore is installed and I've a "C:\Core" folder as well as a "HyperCore" folder on my desktop.
The "DumpRom" is asking me to make sure the "nk.nbf" is in "HyperCore\Extract\Source" folder. Well it is there. Press Enter and the error message says: "There is no nk.nbf in Core\Extract\Source".
No it is not. First, it asked me to put it in "HyperCore\Extract\Source" not "Core\Extract\Source". Second, there is no "Extract" folder under "C:\Core". Even after creating Extract\Source under C:\Core and copying nk.nbf there, the same error message appears again.
So, what I'm missing here?
Same
I'm also scratching my head on this problem too. I've even tried creating extract\source folders in locations C:\core\ and desktop\hypercore\ but still no luck.
I'm wondering however that the issue could be caused by vista/7's change from Documents and Settings\user\desktop (2000, XP) to Users\user\desktop.
It may change the way the batch files are called but i'm really rusty on batch commands these days
I would start with the sticky "How to cook a ROM" thread, focusing on CRACING's kitchen, then move to Nekid Angel (Post #3)
where you will find a more updated ROM ready to cook. If you want to try WM6.5 a good ROM and kitchen is at [WM Kitchen] Wizard Kitchen or CRACING's RC6. I have been playing around with that.
You might move your discussion to one of the cooking or kitchen threads mentioned above, too, since that is where others will look.
Perfect
That's what i was looking for thanks for the heads up N2rjt!
Is there a program to combine many cab files into one CAB?
I flash many ROMS and would like to make one cab of all the programs that I usually install after a hard reset. (I've tried sashimi, but I need it to be in one cab)
I searched about it, but couldn't find an answer.
Thanks for any help or suggestions.
Moved to Q&A
http://forum.xda-developers.com/showthread.php?t=366337
To ather90:
I apologize for posting in the wrong forum.
To nir36:
Thanks for your help, but I was wondering about a program that will create a cab from many cabs, not UC.
Its ok, but becareful next time
there isent a way to install several cabs in a single install, though what you can do is to make a new cab file with all your data in it, but it will make a VERY big Cab ;D
no no.. what i meant is, use UC to create an installation of all your cab files. you can't combine a lot of cabs into 1 cab because it's not readable.
ather90 said:
Its ok, but becareful next time
there isent a way to install several cabs in a single install, though what you can do is to make a new cab file with all your data in it, but it will make a VERY big Cab ;D
Click to expand...
Click to collapse
We'll be more careful next time.
That's exactly what I wanted, to make one big cab.
The same idea as this one: http://forum.xda-developers.com/showthread.php?t=464758&highlight=game+pack
Its not free, but look at http://www.ocpsoftware.com/products.php?nm=cecabmgr
edit: It might be possible to extract the data from the cabs you have, and recombine them into one big cab file.
i use WinCECabManager to create cab files.. but you can't create full installations of many cab files in the same cab.
I have got the ROM Image Editor. I edit the nbh file of the ROM. I need to know how to add my cab files to the ROM so it gets installed automatically as I flash the ROM. This will help get things up running promptly with each new ROM I install.
Anyone can help ?
SASHIMI check my ROM thread for download if can't find....
already use Sashimi
I already have Sashimi 8.0 & I use it. But I see building the cabs within a new ROM in way that gets them all installed as I flash the ROM, would be great & fast.
I have the ROM Image Editor but I just don't know where to add the cabs within the ROM folders to reach the target.
Is there anyone who can help on this ?
Cooking
You're going to have to cook them into your ROM, which won't be in the form of .cab's any more. They'll be in EXT. And everytime you change roms, you'll have to extract whichever rom you dl, and recook it with the programs you want in there. SASHIMI is probably your best bet unless you feel like spending a lot of time on each and every ROM just so that when you flash it the programs are already in there.
Anyone feel free to correct me if I'm off base here, but it's probably not worth it for speed and ease issues.
Happy Flashing!
drumboy03
yassero said:
Is there anyone who can help on this ?
Click to expand...
Click to collapse
What ROM editor are you using? Perhaps htcRIE_0.5.0.12 from http://forum.xda-developers.com/showthread.php?t=377514 ?
If that´s the one you are using I don´t think is capable to do what you want, as drumboy said: Cooking is the way
luiggi said:
What ROM editor are you using? Perhaps htcRIE_0.5.0.12 from http://forum.xda-developers.com/showthread.php?t=377514 ?
If that´s the one you are using I don´t think is capable to do what you want, as drumboy said: Cooking is the way
Click to expand...
Click to collapse
Yes it is htcRIE_0.5.0.12. Do you know how to install the cabs in a ROM ?
Usually after a ROM is installed & during customization, some cabs appear in folder Volatile & are then installed. Can I place my cabs along those ?
yassero said:
Yes it is htcRIE_0.5.0.12. Do you know how to install the cabs in a ROM ?
Usually after a ROM is installed & during customization, some cabs appear in folder Volatile & are then installed. Can I place my cabs along those ?
Click to expand...
Click to collapse
Ok if you want to install it after flash, then you can do it a few different ways, like UC, XDA_UC or tom's autoinstall. But for all those you need to cook them in the ROM.
If you dont have it cooked in, then shashmi or programs similar to those will help.
You cant edit a ROM using htcRIE, in the sense add cabs and stuff, and recompile it to make it bootable in my opinion.
You can play with it and see! If the ROM is using runCC, then you need to add cabs, and mofify config_operator.txt file to add those cabs to execute in first boot.
Hope this helps.