Related
hello ,
i bought an i-mate jam , but the OS version language is in french. At first activesync worked correctly , but now i' m trying to connect the magician even on others pc and other version of activesyc ... but doesn' t work !!
So I red carefully all the threads and post of this forum and download rom and instructions for doing an upgrade to Italian Language Version :
I enter on the bootloader mode, I disactivate activesync , and now when I plug in the USB cable, I see a write USB v.1.02 sO i think the pc recognize the pda , but when I launch MaupgradeUt , does not recognize the i-mate ROM version, I tried many times , even with other pcs , but nothing !!!
BUT I'M NOT USING THE ORIGINAL USB CABLE OF I-MATE , BEACUSE WHEN I BOUGHT IT THEY DID NOT GIVE ME. I' M USING A MINI-USB CABLE OF BLACKBERRY , BUT IN THIS FORUM I RED THAT IS THE SAME ...
I ALSO DOWNLOAD THE LAST GUIDE FOR UPGRADING MAGICIAN ...
Does someone know where is the problem ? When I unplug the usb cable Do I have to hard reset any time after i enter the bootloader ?
Please help me, even becuse with this Rom I cannot use activesync for install programs ....
p.s. : the phone works correctly, the only problem is activesync
About the ROM upgrade - your cable is fine, if the PDA detects the USB connection (ie. shows 'USB' on screen) then the connection is fine. Try running romupdate.exe and getting it to backup your ROM by using the 'd2s' command (its somewhere in my guide... sorry I'm in a hurry so I can't give you the exact location yet). If this suceeds, then you should be clear to attempt an upgrade regardless of whether the update software detects your current ROM version or not - but keep that ROM image on the SD card just in case. The worst thing that will happen is that your ROM will be corrupted (this is rare), but even then it is a rather painless process to restore your original ROM since you have it backed up on your SD card.
About the ActiveSync problem - try soft resetting your Magician. If it still doesn't work, try a hard reset (but back up your data first, of course). ActiveSync can be rather glitchy sometimes.
hello ,
I tried the instructions you gave me on the post ,, i tried doing the backup rom with all the instructions of your PDF guide but :
- the phone gave me USB ver. 1.02 ,
disactivate the activesync ,
run romupdate.exe
- but on the port setting I had only two options COM1 and COM2 , but no way for \\.\WCEUSBSH001
Have I any possibility to change the ROM , maybe with a flash SD CARD method ?
IS IT POSSIBLE TO USE THIS GUIDE http://forum.xda-developers.com/showthread.php?t=235734&highlight=ROM+UPDATE OF THE SD CARD FLASH
WITHOUT DOING A ROM BACKUP ( ROMUPDATE DOES NOT WORK WITH MY PDA -)
- Today I even tried on my brother pc portatile , but here the " MaUpgradeUt_noID.exe " WAS about 3 hours saying me to not disconnect the pda .... but after 3 hours I unplugGed it , i did a soft reset and automatically installed all the applications ( hard reset)
instead on my pc it does not recognize the rom
- When I received the phone activesync was working fine , then I download an italian version rom from clubimate, I ran it , and give me " Country ID Error" , FROM THAT MOMENT ON MY PDA NEVER RECOGNIZE AGAIN ACTIVESYNC on any type of PC
is it possible that the wizard originale rom corupt my pda?
the only problem is the activesync
- BUT IF ON THE BOOTLOADER IT GIVES ME USB V.1.02 IS THERE A POSSIBILITY TO SOLVE THE PROBLEM?
- Is there a way to flash the ROM from the SD CARD ?
- Is there a probality that with a new ROM , activesync will work again ?
Thank you very very much toomuchdogfur for helping me , please I NEED A HELP , are about 4 days that this phone is making me crazy ...............
I've XDA neo ,and it's Rom version is old and german one , I want to update using AKU 3.3.13
I start it , but it lasted more than 40 minutes without any result , so I disconnect the pda , and restarted it ,but it stopeed at O2 screen ,the first screen at all ,where typed :
IPL 2.15.0001
SPL 2.15.0001
GSM 02.19.21
OS 3.0.0.0
I don't know what to do now ,plz help me to solve this problem
many thanx for ur reading my ask
What ROM (the update) where you trying to isntall? Was it an official one, or a cooked ROM?
Try to enter bootloader (the three colour screen) bu pressing and holding the com manager button and performing a soft reset.
If this works, download the latest version of active sync and install it, and once that has completed, restart your computer.
Download a WM5 NVID (No Vendor ID) ROM from here and unpack/unzip it into the root of a harddrive (i.e.: C:\WM5ROM\).
Now, put the device in bootloader mode, and within ActiveSync DISABLE connect through USB (Tools->Connection Settings->Uncheck Allow Connect through USB) and plug the device into the computer.
Now run the RUU from the WM5 ROM you downloaded earlier.
Your device should now work.
Many Thaaaaaaaaaaanx
At Last i've got my pda again
it worked very well,thank you very much for your help
by the way , the link for the rom which u've put in ur reply doesn't work but i get the oficial rom 2005 from another website and applied ur steps and everything is going ok
thank you very much
No problem.
The reason the link didn't work is because the FTP server doesn't allow direct access. You learn something new everyday.
Hello there,
I tried to flas my MDA and now it stays in bootloader (1.01). Whatever I do: it stays there! (hard/factory reset and what not). Whenever I want to install a new rom by a RUU application, this goes wrong as well!Any help would be much appreciated!
Ive the same problem @ the moment! I tried to do a Rom update and then an error appeared and the installation failed and the recovery afterwards aswell! Now my Universal stucks in the bootloader mode showing USB v. 1.01! How can I get out of this mode! I tried the hard reset, like joenie described but i didnt work!
Aalsen said:
Ive the same problem @ the moment! I tried to do a Rom update and then an error appeared and the installation failed and the recovery afterwards aswell! Now my Universal stucks in the bootloader mode showing USB v. 1.01! How can I get out of this mode! I tried the hard reset, like joenie described but i didnt work!
Click to expand...
Click to collapse
I have the same problem sometimes when I change ROM version, the installer reboots the PDA in USB mode and nothing, the installer display an error and crash. The PDA in not recognized correctly in USB mode.
It is due to your PC (Activesync crashes in silent mode and disable WM device drivers) and not the UNI!!!
Try restart activesync (open it), unplug and replug the UNI and restart installer, the installer will not recognize the actual ROM version but it should be working...
If it fails try to restart the PC or uninstall and reinstall activesync and retry installation...
Be carrefull because in USB boot mode the UNI cannot charge the battery, if the battery is down, you cannot restart installation (And cannot disable boot mode).
I was affraid the first time of USB boot lock (It was the panic, UNI bricked...) but now, I know the problem and I resolve it fastly (restart activesync).
Good luck!!!
Hey thanks for all the advices! i found a really good tutorial how to unbootloader it. But the actuall problem is that windows vista is not having any active sync like Windows XP. I now you can download a windows mobile device manager and I tried the deactivation of the USB port over this one, but it didnt work! Is there any other methode oder way how to get access to the phone to change the status?
Thank You very much!
Aalsen
Aalsen said:
Hey thanks for all the advices! i found a really good tutorial how to unbootloader it. But the actuall problem is that windows vista is not having any active sync like Windows XP. I now you can download a windows mobile device manager and I tried the deactivation of the USB port over this one, but it didnt work! Is there any other methode oder way how to get access to the phone to change the status?
Thank You very much!
Aalsen
Click to expand...
Click to collapse
Can you add here the link of the tutorial???
May be try remove usb devices in the device manager of Vista and reboot the PC to redetect the UNI USB drivers.
well lad's and gent's..
I found out what my real problem was
It was a broken USB-cable :|.. wtf!!!
Well anyway. I think you guys are great! all the posts/helps!!
It some else to do???
I try to flash my JASJAR and I brick it........The instaler send my an error and I stuck in bootloader but the instaler window says to cool reset the Universal and the Bootloader was gone and the universal now is death, can't turn on and no Boot...Its bricked and I still crying!!!!.....
Well I have installed a new Rom yesterday on my Q9000...
I whas using my laptop which has Vista on it. Dont know what happend but I got an error msg on my laptop...Tried to reboot my Qtek but it whas hanging on the bootup screen(the 1st screen which shows all Rom/ext rom and Radio version). No matter what I did it refused to bootup...
When plugging in my Qtek on to my laptop, the bootloader screen changed from serial to Usb...
Finally I tried it on the desktop wich still runs on XP and it did the Romupgrade without any pain...
I did several Romupgrades on my Herald all on my Vista laptop without any problems...I don't really understand what or why, maybe because the Qtek is older than the P4350 that it is less compatible with Vista?
Bottom line, I now have a Qtek 9000 which is fast ...
Hi my Qtek 9000 doesn't work anymore after installation of Ranju_v77_WM61_19900_19900_1_0_2.
it never finished it.
but when i try to recovery on qtek or with the pc, with the Ranju installation program.
it also said don't look weird if you only got usb with the version number on your pda screen.
that window comes after if the installation failed, but when i try to back it up the program stops working.
so now i can't use my pda please help me.
Greetz, (n00b)
pommie said:
Hi my Qtek 9000 doesn't work anymore after installation of Ranju_v77_WM61_19900_19900_1_0_2.
it never finished it.
but when i try to recovery on qtek or with the pc, with the Ranju installation program.
it also said don't look weird if you only got usb with the version number on your pda screen.
that window comes after if the installation failed, but when i try to back it up the program stops working.
so now i can't use my pda please help me.
Greetz, (n00b)
Click to expand...
Click to collapse
Hi,
The answers you seek are in the WIKI.
Hold the backlight + power button whilst resetting the device. This will put you back into bootloader mode, you can then reflash the Rom.
I would also advise that you SuperCid your device before flashing any Roms, if you haven't done so already.
Again this is documented in the Wiki.
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Cheers,
Beasty
my screen show me serial v1.01 and if i put the usb cable in it shows me usb v1.01
on my pc it installed as microsoft usb sync, but it won't connect on windows mobile device center.
so i can't use mtty even if i unselect usb in windows mobile device center i still can't select usb in mtty ive tried few times to delete and reinstall on my pc but still does not work.
pommie said:
my screen show me serial v1.01 and if i put the usb cable in it shows me usb v1.01
on my pc it installed as microsoft usb sync, but it won't connect on windows mobile device center.
so i can't use mtty even if i unselect usb in windows mobile device center i still can't select usb in mtty ive tried few times to delete and reinstall on my pc but still does not work.
Click to expand...
Click to collapse
The problem is Vista!
Search the forum and you will find a post with a fix (old drivers) for Vista, or just use a Windows XP or previoous MS OS to flash your device.
I would suggest XP if you plan to keep flashing in the near future
do i need to super cid my htc universal in order to upgrade to ranju v77. my universal is branded dopod 900 and can use with any simcard. thanks
lucky for me, i also got a pc with xp sp2 but my pda works with ranju v77 thnx man.
only from nokia phones i can't send file with bluetooth, phones like samsung works fine
Hello XDA Nice Team !
By mistaken i wrote some file to my bootloader in my I-Mate Jam ..
That was after using the bad ROM : 2.03
it's the worst cooked version i saw !
Now my bootloader mode is working .. but no way to connect to PC with USB port ..
My computer does not recognize my Magican when plugged in bootloader mode anymore!
Bootloader Ver: 1.0
is there any way to fix or upgrade or restore original bootloader
Now i cant upgrade or downgrade my magican by any method
Noway to use successful connection with any roomupdate utility
Please help me to fix or restore my bootloader!
Thanks to any one read or replay or try to help or help me to resolve my problem
XDA lover
i'm sorry that happened mate...
i've had success with flash-from-bootloader attempts before, both on my Magician, when i accidentally flashed off of Vista and it'd enter the bootloader every week or on a reset using the reset hole, and also on my Wizard when i ignored warnings from WM5torage and it'd only enter the bootloader
what precisely happens when you connect to the PC, allow USB connections in AS/MDC, and let the phone enter bootloader however it does? i can just flash a rom from there, but i won't (iirc) get any reports of as recognising the device...
My experience:
1- when i plug my sd card into my jam .. usb not recognized in bootloader mood !!
2- when i use puty or roomupdate it reaches to USB> then when i type any command it does not respond !
3- i could do something .. i let my phone bootup and this i-mate logon screen stays 4ever .. i connected my ppc to pc and i could explre my imate by activesync ...
i could reach something .. when i explore my phone and remove everything from startup folder .. my phone boots .. and i can see start botton .. no touch alignment comes .. and everything works .. but.. screen is virtually reversed .. i can see the OK botton but i must click on the facing area and it be clicked ..
i think i executed some wrong hard SPL to my phone ant that happened >
is there any way to resolve this problem?
is there any way to erase flash on my I-Mate Jam????
is there any way flash my phone?
i also have prepaid JAFWM with pkey and USB cable .. no BOX ..
Help please!
that's messed up... howsabout flashing it at the point when the phone boots up? if there's an AS connection there, then it may work... i'd flash to an official rom though
Same problem , PLS Help !!!
Thx for help
You should check USB connection I think...
Try plug your battery out of device and wait a moment (e.g.10 minutes) and try again,sometimes it will be fine when you did this.
If your magician isn't detected at ALL by your PC when plugging the USB cable into it (i mean, no new hardware; no unrecognized hardware; nothing is detected in your PC when you plug the USB cable), and unless you had previously made a SD backup of your entire Flash with this procedure ( http://wiki.xda-developers.com/index.php?pagename=MagicianSDflash ), then your only option will be to build a JTAG diag cable:
Here are some general directions / ideias:
Magician JTAG pinout: http://wiki.xda-developers.com/index.php?pagename=MagicianJTAG
How to build/run the JTAG: http://wiki.xda-developers.com/index.php?pagename=DeadBoot
Photos : http://www.cf-box.com/htm_data/55/0912/1679.html
Some interesting stuff for debugging problems: http://pda2u.ru/ptopic205.html
For sure cotulla has one built so to test his ROMs + bootloader - maybe he will be willing to give you some directions if you run into problems, and above all, give you a prepared .nb0 (with the bootloader file) for your magician, which i do not know if there's one out there, extracted from an original ROM.
Anyway, you can always try and do it for yourself using itsme utilities. Follow this link: http://forum.xda-developers.com/showthread.php?t=218643
Regards
Keeper,you're awesome! I'm searching for JTAG,too
xiaojin1985 said:
You should check USB connection I think...
Try plug your battery out of device and wait a moment (e.g.10 minutes) and try again,sometimes it will be fine when you did this.
Click to expand...
Click to collapse
Dear xiaojin1985 ,
Thx for your help, But unfortunately i tried your solution but it dosnt work !
Dear Keeper,
Thanks too for your help,
and i think the solution for my problem is one of the solutions you says ( How to build/run the JTAG: ) ,
but the pictures is not available anymore , so pls can you get the pictures ?
All the pictures are in here:
http://s218.photobucket.com/albums/cc23/alex_beda/ and in attachment there's a .mth file with all the pics built-in.
Don't take it wrong what i'm about to say, but in all honesty if you can't figure this out yourself (digging up the internet for the missing pics), i would suggest that you shouldn't try this, since this ain't easy at ALL...
Just to give you some ideias, it will require you to adapt your magician test point signals (TDO;TDI; nRESET; etc,)seen on the magician pinout pic to what is said; solder very thin wires (best done with a small hot air tip); fixate the small dip switch (micro switch) to be always on; keep the USB connected...idk... plus alot of other small details which ain't easy to accomplish.
Personally i haven't tried this yet but for sure it would work
If you decide to go ahead, please post some results!
Connection error solution
this is my problem
hi all. A friend of mine gave me an S100, and after i played for a few days with it, i decided to update it's rom. A "country error" problem appeared,cause i have the greek version, so i ran MaUpgradeUt_noID.exe which completed (as showed 100% process). My (new) problem is that i cannot update anymore. Every time i enter boot menu, i ran the upgrade
(HTCMAG_ROM_WWE_O2.rar) following all the steps normally. When the device resets (so the upgrade is going to start), it's re-reseting again and showing ERROR 101 connection error. Any ideas?
Qtek Greek version
R 1.12.00
G 1337.42
D 1.12.00 WWE
P.S. apart the problem everything is function properly
and the solution
hard reset
plug usb (uncheck allow usb connection in activesynch )
run MaUpgradeUt.exe radio_1.11_greek but idont reset the qtek in first screen
and upgrate downgrate start all ok
reset
welcome screen
hard reset
plug usb (uncheck allow usb connection in activesynch )
run MaUpgradeUt.exe MagicianRadio_1.12.10. uk but idont reset the qteki n first screen
upgrate from radio 1.11 to 1.12.10
reset
welcome screen
hard reset
plug usb (uncheck allow usb connection in activesynch )
run HTCMAG_ROM_WWE_O5_251209
everything is ok my magisian run the new Rom
here..........................