hello ,
i bought an i-mate jam , but the OS version language is in french. At first activesync worked correctly , but now i' m trying to connect the magician even on others pc and other version of activesyc ... but doesn' t work !!
So I red carefully all the threads and post of this forum and download rom and instructions for doing an upgrade to Italian Language Version :
I enter on the bootloader mode, I disactivate activesync , and now when I plug in the USB cable, I see a write USB v.1.02 sO i think the pc recognize the pda , but when I launch MaupgradeUt , does not recognize the i-mate ROM version, I tried many times , even with other pcs , but nothing !!!
BUT I'M NOT USING THE ORIGINAL USB CABLE OF I-MATE , BEACUSE WHEN I BOUGHT IT THEY DID NOT GIVE ME. I' M USING A MINI-USB CABLE OF BLACKBERRY , BUT IN THIS FORUM I RED THAT IS THE SAME ...
I ALSO DOWNLOAD THE LAST GUIDE FOR UPGRADING MAGICIAN ...
Does someone know where is the problem ? When I unplug the usb cable Do I have to hard reset any time after i enter the bootloader ?
Please help me, even becuse with this Rom I cannot use activesync for install programs ....
p.s. : the phone works correctly, the only problem is activesync
About the ROM upgrade - your cable is fine, if the PDA detects the USB connection (ie. shows 'USB' on screen) then the connection is fine. Try running romupdate.exe and getting it to backup your ROM by using the 'd2s' command (its somewhere in my guide... sorry I'm in a hurry so I can't give you the exact location yet). If this suceeds, then you should be clear to attempt an upgrade regardless of whether the update software detects your current ROM version or not - but keep that ROM image on the SD card just in case. The worst thing that will happen is that your ROM will be corrupted (this is rare), but even then it is a rather painless process to restore your original ROM since you have it backed up on your SD card.
About the ActiveSync problem - try soft resetting your Magician. If it still doesn't work, try a hard reset (but back up your data first, of course). ActiveSync can be rather glitchy sometimes.
hello ,
I tried the instructions you gave me on the post ,, i tried doing the backup rom with all the instructions of your PDF guide but :
- the phone gave me USB ver. 1.02 ,
disactivate the activesync ,
run romupdate.exe
- but on the port setting I had only two options COM1 and COM2 , but no way for \\.\WCEUSBSH001
Have I any possibility to change the ROM , maybe with a flash SD CARD method ?
IS IT POSSIBLE TO USE THIS GUIDE http://forum.xda-developers.com/showthread.php?t=235734&highlight=ROM+UPDATE OF THE SD CARD FLASH
WITHOUT DOING A ROM BACKUP ( ROMUPDATE DOES NOT WORK WITH MY PDA -)
- Today I even tried on my brother pc portatile , but here the " MaUpgradeUt_noID.exe " WAS about 3 hours saying me to not disconnect the pda .... but after 3 hours I unplugGed it , i did a soft reset and automatically installed all the applications ( hard reset)
instead on my pc it does not recognize the rom
- When I received the phone activesync was working fine , then I download an italian version rom from clubimate, I ran it , and give me " Country ID Error" , FROM THAT MOMENT ON MY PDA NEVER RECOGNIZE AGAIN ACTIVESYNC on any type of PC
is it possible that the wizard originale rom corupt my pda?
the only problem is the activesync
- BUT IF ON THE BOOTLOADER IT GIVES ME USB V.1.02 IS THERE A POSSIBILITY TO SOLVE THE PROBLEM?
- Is there a way to flash the ROM from the SD CARD ?
- Is there a probality that with a new ROM , activesync will work again ?
Thank you very very much toomuchdogfur for helping me , please I NEED A HELP , are about 4 days that this phone is making me crazy ...............
Related
hello everyone. i just bought a g3 wich remains stuck in the ipl/spl screen. i tried VIPPIE 's tutorial (many thanks man for ur work) and flash button rom 1.05 to revive the phone. it flashed without any error , but same result. phone doesnt pass the ipl/spl screen. next i tried to flash Xda_MiniS_LaunchROM_v154102, flashed ok but nothing happend. i m just stuck on the ipl/spl screen. the phone isnt bricked but i can not start it to do a soft spl and flash it. any ideas ?
because it s an o2 xda mini s , i thought an original o2 rom would do the trick (start the phone) but i couldnt find an original rom (tried the xda dev ftp page and the o2 one).
many thanks
hehh
same happend to me once. Go online and finde botton run , update utility 2.00.1
go step by step:
Disconnect your phone from the usb cable,disable any Firewall and Anti virus and reboot your Pc.
1. Make sure your phone is not Connected to the PC and remove the dummy card or SD/MMC card
2. On your Desktop PC, open Microsoft ActiveSync, then go to File >Connection Settings >Remove the Selection from “Allow USB Connection with this desktop computer”
3. Reconnect your phone to the Desktop PC using the USB Cradle and the Charger MUST be Connected to the Cradle (Don’t Bluetooth for the Upgrade)
4. When you see usb appear at the bottom of bootloader screen
5. Run the Upgrade again and it will work fine without any problems.
While upgrading, the ActiveSync program will not go on, however the upgrade is running.
After then, install origial ROM. (u can try T-Mobile MDA Software Version (2.26.10.2) )
Let me know if it's working
ty man for ur reply , i have tried every possible solution, including mtty! no luck. from ur post i didnt understand the following
Go online and find botton run , update utility 2.00.1
Click to expand...
Click to collapse
did u mean button rom . if yes , what the 'update utility 2.00.1' ?
ty
can i use mtty to revive my phone? i found some command for erasing my entire rom in the phone , but it doesnt seem to work . help me
I've XDA neo ,and it's Rom version is old and german one , I want to update using AKU 3.3.13
I start it , but it lasted more than 40 minutes without any result , so I disconnect the pda , and restarted it ,but it stopeed at O2 screen ,the first screen at all ,where typed :
IPL 2.15.0001
SPL 2.15.0001
GSM 02.19.21
OS 3.0.0.0
I don't know what to do now ,plz help me to solve this problem
many thanx for ur reading my ask
What ROM (the update) where you trying to isntall? Was it an official one, or a cooked ROM?
Try to enter bootloader (the three colour screen) bu pressing and holding the com manager button and performing a soft reset.
If this works, download the latest version of active sync and install it, and once that has completed, restart your computer.
Download a WM5 NVID (No Vendor ID) ROM from here and unpack/unzip it into the root of a harddrive (i.e.: C:\WM5ROM\).
Now, put the device in bootloader mode, and within ActiveSync DISABLE connect through USB (Tools->Connection Settings->Uncheck Allow Connect through USB) and plug the device into the computer.
Now run the RUU from the WM5 ROM you downloaded earlier.
Your device should now work.
Many Thaaaaaaaaaaanx
At Last i've got my pda again
it worked very well,thank you very much for your help
by the way , the link for the rom which u've put in ur reply doesn't work but i get the oficial rom 2005 from another website and applied ur steps and everything is going ok
thank you very much
No problem.
The reason the link didn't work is because the FTP server doesn't allow direct access. You learn something new everyday.
Hello XDA Nice Team !
By mistaken i wrote some file to my bootloader in my I-Mate Jam ..
That was after using the bad ROM : 2.03
it's the worst cooked version i saw !
Now my bootloader mode is working .. but no way to connect to PC with USB port ..
My computer does not recognize my Magican when plugged in bootloader mode anymore!
Bootloader Ver: 1.0
is there any way to fix or upgrade or restore original bootloader
Now i cant upgrade or downgrade my magican by any method
Noway to use successful connection with any roomupdate utility
Please help me to fix or restore my bootloader!
Thanks to any one read or replay or try to help or help me to resolve my problem
XDA lover
i'm sorry that happened mate...
i've had success with flash-from-bootloader attempts before, both on my Magician, when i accidentally flashed off of Vista and it'd enter the bootloader every week or on a reset using the reset hole, and also on my Wizard when i ignored warnings from WM5torage and it'd only enter the bootloader
what precisely happens when you connect to the PC, allow USB connections in AS/MDC, and let the phone enter bootloader however it does? i can just flash a rom from there, but i won't (iirc) get any reports of as recognising the device...
My experience:
1- when i plug my sd card into my jam .. usb not recognized in bootloader mood !!
2- when i use puty or roomupdate it reaches to USB> then when i type any command it does not respond !
3- i could do something .. i let my phone bootup and this i-mate logon screen stays 4ever .. i connected my ppc to pc and i could explre my imate by activesync ...
i could reach something .. when i explore my phone and remove everything from startup folder .. my phone boots .. and i can see start botton .. no touch alignment comes .. and everything works .. but.. screen is virtually reversed .. i can see the OK botton but i must click on the facing area and it be clicked ..
i think i executed some wrong hard SPL to my phone ant that happened >
is there any way to resolve this problem?
is there any way to erase flash on my I-Mate Jam????
is there any way flash my phone?
i also have prepaid JAFWM with pkey and USB cable .. no BOX ..
Help please!
that's messed up... howsabout flashing it at the point when the phone boots up? if there's an AS connection there, then it may work... i'd flash to an official rom though
Same problem , PLS Help !!!
Thx for help
You should check USB connection I think...
Try plug your battery out of device and wait a moment (e.g.10 minutes) and try again,sometimes it will be fine when you did this.
If your magician isn't detected at ALL by your PC when plugging the USB cable into it (i mean, no new hardware; no unrecognized hardware; nothing is detected in your PC when you plug the USB cable), and unless you had previously made a SD backup of your entire Flash with this procedure ( http://wiki.xda-developers.com/index.php?pagename=MagicianSDflash ), then your only option will be to build a JTAG diag cable:
Here are some general directions / ideias:
Magician JTAG pinout: http://wiki.xda-developers.com/index.php?pagename=MagicianJTAG
How to build/run the JTAG: http://wiki.xda-developers.com/index.php?pagename=DeadBoot
Photos : http://www.cf-box.com/htm_data/55/0912/1679.html
Some interesting stuff for debugging problems: http://pda2u.ru/ptopic205.html
For sure cotulla has one built so to test his ROMs + bootloader - maybe he will be willing to give you some directions if you run into problems, and above all, give you a prepared .nb0 (with the bootloader file) for your magician, which i do not know if there's one out there, extracted from an original ROM.
Anyway, you can always try and do it for yourself using itsme utilities. Follow this link: http://forum.xda-developers.com/showthread.php?t=218643
Regards
Keeper,you're awesome! I'm searching for JTAG,too
xiaojin1985 said:
You should check USB connection I think...
Try plug your battery out of device and wait a moment (e.g.10 minutes) and try again,sometimes it will be fine when you did this.
Click to expand...
Click to collapse
Dear xiaojin1985 ,
Thx for your help, But unfortunately i tried your solution but it dosnt work !
Dear Keeper,
Thanks too for your help,
and i think the solution for my problem is one of the solutions you says ( How to build/run the JTAG: ) ,
but the pictures is not available anymore , so pls can you get the pictures ?
All the pictures are in here:
http://s218.photobucket.com/albums/cc23/alex_beda/ and in attachment there's a .mth file with all the pics built-in.
Don't take it wrong what i'm about to say, but in all honesty if you can't figure this out yourself (digging up the internet for the missing pics), i would suggest that you shouldn't try this, since this ain't easy at ALL...
Just to give you some ideias, it will require you to adapt your magician test point signals (TDO;TDI; nRESET; etc,)seen on the magician pinout pic to what is said; solder very thin wires (best done with a small hot air tip); fixate the small dip switch (micro switch) to be always on; keep the USB connected...idk... plus alot of other small details which ain't easy to accomplish.
Personally i haven't tried this yet but for sure it would work
If you decide to go ahead, please post some results!
Connection error solution
this is my problem
hi all. A friend of mine gave me an S100, and after i played for a few days with it, i decided to update it's rom. A "country error" problem appeared,cause i have the greek version, so i ran MaUpgradeUt_noID.exe which completed (as showed 100% process). My (new) problem is that i cannot update anymore. Every time i enter boot menu, i ran the upgrade
(HTCMAG_ROM_WWE_O2.rar) following all the steps normally. When the device resets (so the upgrade is going to start), it's re-reseting again and showing ERROR 101 connection error. Any ideas?
Qtek Greek version
R 1.12.00
G 1337.42
D 1.12.00 WWE
P.S. apart the problem everything is function properly
and the solution
hard reset
plug usb (uncheck allow usb connection in activesynch )
run MaUpgradeUt.exe radio_1.11_greek but idont reset the qtek in first screen
and upgrate downgrate start all ok
reset
welcome screen
hard reset
plug usb (uncheck allow usb connection in activesynch )
run MaUpgradeUt.exe MagicianRadio_1.12.10. uk but idont reset the qteki n first screen
upgrate from radio 1.11 to 1.12.10
reset
welcome screen
hard reset
plug usb (uncheck allow usb connection in activesynch )
run HTCMAG_ROM_WWE_O5_251209
everything is ok my magisian run the new Rom
here..........................
Hi Help me pls,
I've tried to flash my rom via ActiveSync. Every thing went well until i get the progress bar then it got stuck at 0% for ages so i disconnect the whole thing and tried to restart the process.
NOW I CAN'T ACTIVESYNC ANYMORE !!!! but the connection as "memory card reader" still working.
I went through all the post and tried to flash the ROM via bootloader with the "RAPHIMG.nbh" in my SD card ( already formated FAT32 ) but every time the PDA got stuck at the first stage "loading".
HELP ME PLEASE
I have similar problem, can't connect to PC anymore, but flashing with SD card works for me
have you tried different ROM images?
TQY said:
Hi Help me pls,
I've tried to flash my rom via ActiveSync. Every thing went well until i get the progress bar then it got stuck at 0% for ages so i disconnect the whole thing and tried to restart the process.
NOW I CAN'T ACTIVESYNC ANYMORE !!!! but the connection as "memory card reader" still working.
I went through all the post and tried to flash the ROM via bootloader with the "RAPHIMG.nbh" in my SD card ( already formated FAT32 ) but every time the PDA got stuck at the first stage "loading".
HELP ME PLEASE
Click to expand...
Click to collapse
It sounds like you did not carefully read this.
That is also where this should have been posted. A new thread should not be started for this type of issue. I understand you are panicing. However, in almost all situations the phone can be recovered.
That said, Hold volume down and hit the reset button. It will put you in the tricolor screen. In the white it says serial. Connect it to your usb cord. It should now say usb. Now flash the STOCK rom.
be sure that battery over 50% then follow arupphental's
I have a friend with a kaiser and the same problem. can this be applied to it? i dont want to search through the forum forever...
I would start by going to the kaiser forums and checking the stickies. Search within the kaiser forum also works.
I have This problem on Vista OS, i connect my touch pro after reboot system, and if i disconnect device and try again connect, my system not see device!
On device manager in OS, my touch pro stay present after disconnect device. This problem retry if after connect i try flash rom on device, black screen on and flashing stop with error connect to device.
Please Help!!!!!
P.S. Sorry my Bad English
X2D said:
I would start by going to the kaiser forums and checking the stickies. Search within the kaiser forum also works.
Click to expand...
Click to collapse
ok i thought someone would say that. was just wondering off hand. thanks x2d
A.creature said:
I have This problem on Vista OS, i connect my touch pro after reboot system, and if i disconnect device and try again connect, my system not see device!
On device manager in OS, my touch pro stay present after disconnect device. This problem retry if after connect i try flash rom on device, black screen on and flashing stop with error connect to device.
Please Help!!!!!
P.S. Sorry my Bad English
Click to expand...
Click to collapse
go to bootloader (tricolor on screen)& flash a rom, your PPC 'll be fine. when you flash ROM, PC transfer data through USB to PPC therefor not need connect by activesync.
I had the same problem after a faulty ROM from Vodafone NL, what I had to do is before I wanted to flash my ROM do a hard reset on my device (please back-up your personal data before doing this). After the hard reset, I could get a stable connection with activesync and flash my ROM
While the circumstances are different, my advice is still the same: http://forum.xda-developers.com/showthread.php?t=481527
longnguyen30 said:
go to bootloader (tricolor on screen)& flash a rom, your PPC 'll be fine. when you flash ROM, PC transfer data through USB to PPC therefor not need connect by activesync.
Click to expand...
Click to collapse
Stumbled upon this.. and yes the advise is good, when you run the flashing utility (i.e. CustomRUU.exe), it says you need an Active Sync connection, but you really dont, you can flash it anyway, it seems to find the device via USB regardless.
ufff!!!! to me yes found right, thank you thank you to first post. (flashing from SD)
Undetected
Well i had the problem where my phone wasnt getting detected at all.... i put the stock rom and radio but couldnt put stock spl on the phone with sdcard.... after trying different computers/usb wires/settings i returned it for a new one and this one works fine.
Hello
I´ve a phone that as a locked version of wm5.
I cannot connect it with active sync.It´s somehow disabled.
I tried to flash it through bootloader but I can´t.
I´ve disabled usb in active sync, and RUU gives me no connection error.
I can ear the sound in windows that a device was connected but can´t access the device.
I´ve read some posts and followed the instructions but still no success.
Any ideas??
I really liked to flash this device.It´s somewhat of a challenge.
thanx in advance
Any 1???
Ok
I manage some further steps but still no way to hardSPL the device.
What I did was:
1- Hard reset
2- finally managed to connect with active sync
3- I then runned ROMUpdateUtility_NV_G4.exe
4- followed the intructions
5- the PDA reboots to bootloader (and doesn´t connect with active sync)
6- in the PDA it appears usb (in left down corner) and RUU (in rigth up corner)
After that the progress bar doesn´t move and conection is lost (error 302)
After that at least I don´t have to recover
Can some1 help me??
Any1??any ideas??
oriebirj said:
Ok
I manage some further steps but still no way to hardSPL the device.
What I did was:
1- Hard reset
2- finally managed to connect with active sync
3- I then runned ROMUpdateUtility_NV_G4.exe
4- followed the intructions
5- the PDA reboots to bootloader (and doesn´t connect with active sync)
6- in the PDA it appears usb (in left down corner) and RUU (in rigth up corner)
After that the progress bar doesn´t move and conection is lost (error 302)
After that at least I don´t have to recover
Can some1 help me??
Any1??any ideas??
Click to expand...
Click to collapse
1. are you sure that yours a G4?
2. you should read my post here... http://forum.xda-developers.com/showthread.php?t=353547
3. hope you that not yet screw up with G3 and G4.... or else your Prophet doomed... ( need to bring to factory... )
4. not 100% of device my HardSPL successful (like mmine ),
5. if so, just flash roms with my lazytool.. ,
ok ......
6. you should Flash NVID now, (must force bootloader with buttons pressed)
7. then activesync to PC (never disable the USB connection please ),
8. flash hardspl then (even not sucessful for 2 times...)
8. flash roms with lazytool
9. Good Luck
Still no luck
Thanx for your quick reply Dio
Anyway I still have no luck flashing NVID.
My device is a really G4.
I force bootloader, but then RUU loses connection and i can´t figure why.
I really follow all the instructions.
Already tried several times but no luck.
Another question:
is there any problem formating extended Rom.
It could solve some of my problems because it installs some CAB wich locks some of the device functions...
Thanks