HTC PROPHET -Flashing Problems - JAMin, XDA Neo, S200 Software Upgrading

I cooked a wm6.5 rom for HTC PROPHET but the rom have a lot of errors more specific is shell error and i want to remove my rom and install other but the activesync cant connect with Prophet .What can i do?
Help me.

plz help me

HARDSPL Already? If yes, try to flash under Bootloader Mode.
With a working ROM of course.

Related

After succesfully flashing WM6 rom, the rom doenst work

I have succesfully flashed my Wizard G4 with a WM6 rom...but...
After the flashing is done, the previous installed rom starts again...
I already tried to flash is first with the Wizard_love rom or official qtek rom but it doesnt make a difference...
I am trying to run the dutch WM6 rom...
Is anybody familiar with this problem? I have searched the forum but couldnt find anything about it...
This means your device isn't CID unlocked.
You'd have to unlock it in order to update your ROM.
the-equinoxe said:
This means your device isn't CID unlocked.
You'd have to unlock it in order to update your ROM.
Click to expand...
Click to collapse
? The CID lock is only to prevent flashing other roms into the phone, am I right?
I used the softSPL, and flashing a rom isnt the problem...
I have flashed: Qtek roms, Wizardlove roms but WM6 roms won't work...
Maybe hardSPL is the solution?
Correct me if im wrong..
thagangsta said:
? The CID lock is only to prevent flashing other roms into the phone, am I right?
I used the softSPL, and flashing a rom isnt the problem...
I have flashed: Qtek roms, Wizardlove roms but WM6 roms won't work...
Maybe hardSPL is the solution?
Correct me if im wrong..
Click to expand...
Click to collapse
YES ! CID lock is to prevent flashing any other Roms other then the official carrier's Roms. A G4 device cannot be CID unlocked like a G3 device,the only solution to upgrade a G4 device to WM6 Rom is by tricking it into patched SPL through SoftSPL and HardSPL temporarily.
You might have not performed the SoftSPL method correctly,read carefully and do the procedure again correctly,it's better to use SoftSPL then HardSPL,if still you are unable to get it,then you may opt for HardSPL.
Cheers !
I think you all misunderstand the problem.
Flashing the G4 aint the problem, I can flash it by using softSPL with every rom I want...
All the roms are working, except when I try WM6 roms...
When I have flashed a WM6 rom, the G4 boots the previous installed rom again, hardresetting doenst matter...
I have had the same problem with a G3, then the cause was a wrong (to old version) bootloader...after upgrading the bootloader the problem was solved...
My G4 has bootloader version 2.18.000.1, could it be that this bootloader is to old to run a WM6 rom, and if so which version bootloader should be recommended?
Thanx in advance!

question regarding hardspl

hI!! i just want to ask, do i have to execute hardspl everytime i change wm6 rom?
i have g4 device here. i think it is already hardsl because the spl ends with xxxolip. thanks masters!!
As long as the SPL version is *.olip, you don't need to run HardSPL again.
thanks! if that's so, i will just run the Rom Upgrade Utility directly right? btw,are the roms posted here safe for G4?
As soon as you are using HardSPL/SoftSPL, any ROMs that doesn't include IPL and SPL are safe to flash (All WM6 ROMs here should be safe, of course)
well one thing u have to find the ruu mun that will let u flash any rom and make sure about ipl spl and should be fine
ph03n1x said:
well one thing u have to find the ruu mun that will let u flash any rom and make sure about ipl spl and should be fine
Click to expand...
Click to collapse
ok sir!!!! so i will just straightly run the mun's RUU with the rom to flash it into my G4? no need to use shelltool?

flash tytn 2 with official ROM without USB

hi,
i would like to know if i can flash an official HTC ROM without any HSPL or SPL modification and if i can do it with my µSD...
Thanks!!!

bootloader after any RUU

hi all ...
can any1 help me plz...
I can't update my jamin rom with any new rom by using RUU and always bootloader 3 colored screen after updating by new way.
only upgrading by using bat file finished successfully and yes hardSPL G4 end successfully 2
I am sorry bcuz my eng but I hope some1 could help thanx a lot
hi
i thing that ur hard spl faild
download the ( RUU_Prophet_220734_2207114_024721_NVID )
u will find it here
plz if nothing happened plz let me know i can help out
first flash it again with oficial update (windows mobile 5)
after it is working again find on forum HardSPL for prophet, Flash it. After that when You restart device it should read on one of line spl 2.g4.4pda.
only after this You can flash any update that You can find on forum.
SPL 2.G4.4PDA can be overwritten if you flash a full official ROM. Just flash NVID rom, get into WM, make connection to activesync/wmdc and do HardSPL again before you flash any cooked rom.

Questions about IPL/SPL and hardspl

Hi,
My old Dopod 818 originally showed the following when booting:
IPL 1.00
SPL 2.15.0000
GSM 02.19.21
OS 2.15.13.27
I used "Prophet Upgrade 2.6 - bikertibi" to upgrade it to WM6.1. I selected HardSPL in that program, and flashed it. This worked fine (scary moment
However, when I boot it now, it STILL shows the exact same IPL, SPL and GSM versions. Only the OS version has changed.
My question: is this normal? I thought the hardspl would change the IPL or SPL versions on the phone?
Is it possible or usefull to upgrade IPL/SPL also?
Second question: if I want to re-flash it again to another 6.5 ROM, can I just use this utility again, without hardspl selected, and without first downgrading back to WM5?
Thanks a lot...
Yup, it's normal because cooked roms don't include ipl/spl (prophet has 2 version : G3 and G4) and radio ... you wouldn't want to brick your device if flashing wrong ipl/spl would you?
However, it is recommended to install HardSPL so that if anything happen during flashing, you can recover the device via entering bootloader mode and only select your device version (G3 or G4) without selecting HardSPL.
ps : your device is G3 because it ends with 0000 .. read the wiki. TQ
Thanks for your reply. So I guess there is no need for me to upgrade IPL, SPL or radio.
How do I know if hardspl is installed?
And if I want to re-flash it again to another 6.5 ROM, can I just use this utility again, without hardspl selected, and without first downgrading back to WM5?
PS. I know my device is a G3, since I already flashed it (see above)
Thanks again.
HardSPL have number like this 2.G3.4PDA (for G3) or 2.G4.4PDA (for G4)... if you haven't HardSPL your device, you need to have HardSPL ticked before flashing. And if anything happen during flashing, your hope is to flash NVID flash.
If your device already HardSPL, you can just redo the flashing. No need to flash NVID unless HardSPL gets overwritten by stock ROM.
Hope this helps.
ps : lucky you .. G3 has more storage memory than G4 ... mine is G4 ...
So if hardspl is present, I should see something like SPL = 2.G3.4PDA at the bootscreen? This is not the case, I still see SPL 2.15.0000 like it did before the flashing. So I guess I don't have hardspl? But how can that be? I click on hardspl in the upgrade tool, and it didn't give an error message... Or do I need to add extra SPL files for this?
It's still unclear to me if I have hardspl installed or not :-( If it's "no", how could I have installed a cooked rom??? If it's "yes", how come I still see SPL 2.15.0000 at the boot screen?
Any help is appreciated!
From what I understand, bikertibi upgrade tools suppose to hardSPL the device but sometimes it seems to just load SoftSPL to the device so that it would temporarily make the device SuperCID? (will experimenting on this) Only SuperCID device can accept any rom. That's why if anything happen during the flashing, your device can only be recovered either by flashing specific CID (t-mobile/cingular/etc) rom or NVID (no specific vendor) rom if it doesn't HardSPLed. It will either reject the flashing process and the device will stuck in bootloader mode.
Since your device still shows SPL 2.15.0000 the answer is no, your device is not HardSPL. Cooked rom was flash successfully because SoftSPL in bikertibi 'tricked' the RUU to be SuperCID temporarily during flashing so it can finish writing a custom rom.
HardSPL for G3 can be download here : http://forum.xda-developers.com/showthread.php?t=353547
To flash a HardSPL, the device needs activesync/wmdc connection to load a special SoftSPL into the device before it can overwrite the stock SPL.
ps : I recommend you learn how to create SDcard dump if you don't want to HardSPL your device. This is because other than flashing stock ROM/NVID, your device can still be recovered using SDcard backup (it will overwrite everything including ipl/spl/os)
EDIT : Flashed my device to IPL/SPL 2.20.0001. bikertibi HardSPL ticked during flashing only send SoftSPL. Flashing was successful. Still need to flash HardSPL 2.G4.4PDA again after phone boots up normally to make it 'immune' from bricking
aze2learn,
Thank you very much for your help.
Indeed, after using the Prophet upgrade tools and activating "hardspl", hardspl was still not on the phone (so it must have used softspl). I installed it manually via the link you provided, and the SPL value changed! After that, I upgraded it to bikertibi's rom.
Very happy with the result.
Thanks again, I will also try the SDcard dump later.

Categories

Resources