hi all ...
can any1 help me plz...
I can't update my jamin rom with any new rom by using RUU and always bootloader 3 colored screen after updating by new way.
only upgrading by using bat file finished successfully and yes hardSPL G4 end successfully 2
I am sorry bcuz my eng but I hope some1 could help thanx a lot
hi
i thing that ur hard spl faild
download the ( RUU_Prophet_220734_2207114_024721_NVID )
u will find it here
plz if nothing happened plz let me know i can help out
first flash it again with oficial update (windows mobile 5)
after it is working again find on forum HardSPL for prophet, Flash it. After that when You restart device it should read on one of line spl 2.g4.4pda.
only after this You can flash any update that You can find on forum.
SPL 2.G4.4PDA can be overwritten if you flash a full official ROM. Just flash NVID rom, get into WM, make connection to activesync/wmdc and do HardSPL again before you flash any cooked rom.
Related
Hi, i am here have some newbie questions to ask before I can flash my tilt with original Kaiser ROM.
I used Hard-spl to unlock my CID yesterday night, worked perfectly, and ready to flash kaiser HTC ROM to my tilt. However, after I read instruction from http://forum.xda-developers.com/showthread.php?t=332246 , I am confused right now.
My question is,
Do I still need to "download and install HardSPL for Kaisers" even I have already unlocked my tilt by Hard-spl? coz the link provided from " http://forum.xda-developers.com/showthread.php?t=332246 " is actually SSPL V1 showing " * THIS WILL WORK ON KAISER ONLY " .
so, do i need to use both Hard-SPL and SSPL? right now, I assume Hard-SPL is only for unlocking CID, and if I want to flash new ROM, I still need to install SSPL and follow the instruction.
Please correct me if my assumption is wrong.
If you have Hard-SPL installed just flash the new Rom.
You do not need both Hard-SPL and SSPL.
SSPL is a SoftSPL, means you need to execute into the PDA to obtain a SPL that makes the same funtcion as HardSPL. HardSPL is a permanent SPL flashed into the PDA, so every time you boot the Kaiser, the HardSPL makes the boot process.
In fact, when you flash HardSPL, the SSPL is used to make possible to flash the HardSPL onto original SPL from HTC.
So if you have flashed the HardSPL, you don't need the SSPL anymore, unless you upgrade the HardSPL to newer version in the future. But in this case, the newer HardSPL makes the work of using the SSPL for you.
Cheers.
I have succesfully flashed my Wizard G4 with a WM6 rom...but...
After the flashing is done, the previous installed rom starts again...
I already tried to flash is first with the Wizard_love rom or official qtek rom but it doesnt make a difference...
I am trying to run the dutch WM6 rom...
Is anybody familiar with this problem? I have searched the forum but couldnt find anything about it...
This means your device isn't CID unlocked.
You'd have to unlock it in order to update your ROM.
the-equinoxe said:
This means your device isn't CID unlocked.
You'd have to unlock it in order to update your ROM.
Click to expand...
Click to collapse
? The CID lock is only to prevent flashing other roms into the phone, am I right?
I used the softSPL, and flashing a rom isnt the problem...
I have flashed: Qtek roms, Wizardlove roms but WM6 roms won't work...
Maybe hardSPL is the solution?
Correct me if im wrong..
thagangsta said:
? The CID lock is only to prevent flashing other roms into the phone, am I right?
I used the softSPL, and flashing a rom isnt the problem...
I have flashed: Qtek roms, Wizardlove roms but WM6 roms won't work...
Maybe hardSPL is the solution?
Correct me if im wrong..
Click to expand...
Click to collapse
YES ! CID lock is to prevent flashing any other Roms other then the official carrier's Roms. A G4 device cannot be CID unlocked like a G3 device,the only solution to upgrade a G4 device to WM6 Rom is by tricking it into patched SPL through SoftSPL and HardSPL temporarily.
You might have not performed the SoftSPL method correctly,read carefully and do the procedure again correctly,it's better to use SoftSPL then HardSPL,if still you are unable to get it,then you may opt for HardSPL.
Cheers !
I think you all misunderstand the problem.
Flashing the G4 aint the problem, I can flash it by using softSPL with every rom I want...
All the roms are working, except when I try WM6 roms...
When I have flashed a WM6 rom, the G4 boots the previous installed rom again, hardresetting doenst matter...
I have had the same problem with a G3, then the cause was a wrong (to old version) bootloader...after upgrading the bootloader the problem was solved...
My G4 has bootloader version 2.18.000.1, could it be that this bootloader is to old to run a WM6 rom, and if so which version bootloader should be recommended?
Thanx in advance!
hI!! i just want to ask, do i have to execute hardspl everytime i change wm6 rom?
i have g4 device here. i think it is already hardsl because the spl ends with xxxolip. thanks masters!!
As long as the SPL version is *.olip, you don't need to run HardSPL again.
thanks! if that's so, i will just run the Rom Upgrade Utility directly right? btw,are the roms posted here safe for G4?
As soon as you are using HardSPL/SoftSPL, any ROMs that doesn't include IPL and SPL are safe to flash (All WM6 ROMs here should be safe, of course)
well one thing u have to find the ruu mun that will let u flash any rom and make sure about ipl spl and should be fine
ph03n1x said:
well one thing u have to find the ruu mun that will let u flash any rom and make sure about ipl spl and should be fine
Click to expand...
Click to collapse
ok sir!!!! so i will just straightly run the mun's RUU with the rom to flash it into my G4? no need to use shelltool?
hey guys,, I did a foolish thing and now i'm stuck!!!
I did the HardSPL thing(apparently wrong!!)
and then i started using RUU flashig the new rom
so now from my SPL on the boot screen i get that the hardSPL didn’t function, and its stuck in boot loader with old SPL
and now that i've flashed the new rom, i cant hardSPL again,,,,
I'm so stuck,
i guess i should flash AKU 2.2 and then hardSPL again,
does it gonna work?
is there anyyyything i can do?
plzzzzzzz
IPL 2.20.0001
SPL 2.20.0001
tnx
thom_yorke said:
hey guys,, I did a foolish thing and now i'm stuck!!!
I did the HardSPL thing(apparently wrong!!)
and then i started using RUU flashig the new rom
so now from my SPL on the boot screen i get that the hardSPL didn’t function, and its stuck in boot loader with old SPL
and now that i've flashed the new rom, i cant hardSPL again,,,,
I'm so stuck,
i guess i should flash AKU 2.2 and then hardSPL again,
does it gonna work?
is there anyyyything i can do?
plzzzzzzz
IPL 2.20.0001
SPL 2.20.0001
tnx
Click to expand...
Click to collapse
are you alright now????
hardSPL wont change the SPL
i flashed it to PVTemp, and try to hardSPL again,
but the damn SPL wont change!!!
it's NOT 2.G4.4PDA, its still 2.20.0001 .
what should I do???
why hardSPL batch isnt functioning ?
WORKED!!!
finally!!!
it worked!!!
after i flashed PVTemp, i tried hardspl the spl on boot screen didnt change
I flashed the new rom any way!!!
it worked!!!!!!!!!!!
i dono why,
i thought it should be 2.G4.4PDA before u can flash the new rom, bleave me all the guide threads said so!
I think hardSPL should change spl, and what i did was softSpl
thom_yorke said:
finally!!!
it worked!!!
after i flashed PVTemp, i tried hardspl the spl on boot screen didnt change
I flashed the new rom any way!!!
it worked!!!!!!!!!!!
i dono why,
i thought it should be 2.G4.4PDA before u can flash the new rom, bleave me all the guide threads said so!
I think hardSPL should change spl, and what i did was softSpl
Click to expand...
Click to collapse
how can it works?
Hi,
My old Dopod 818 originally showed the following when booting:
IPL 1.00
SPL 2.15.0000
GSM 02.19.21
OS 2.15.13.27
I used "Prophet Upgrade 2.6 - bikertibi" to upgrade it to WM6.1. I selected HardSPL in that program, and flashed it. This worked fine (scary moment
However, when I boot it now, it STILL shows the exact same IPL, SPL and GSM versions. Only the OS version has changed.
My question: is this normal? I thought the hardspl would change the IPL or SPL versions on the phone?
Is it possible or usefull to upgrade IPL/SPL also?
Second question: if I want to re-flash it again to another 6.5 ROM, can I just use this utility again, without hardspl selected, and without first downgrading back to WM5?
Thanks a lot...
Yup, it's normal because cooked roms don't include ipl/spl (prophet has 2 version : G3 and G4) and radio ... you wouldn't want to brick your device if flashing wrong ipl/spl would you?
However, it is recommended to install HardSPL so that if anything happen during flashing, you can recover the device via entering bootloader mode and only select your device version (G3 or G4) without selecting HardSPL.
ps : your device is G3 because it ends with 0000 .. read the wiki. TQ
Thanks for your reply. So I guess there is no need for me to upgrade IPL, SPL or radio.
How do I know if hardspl is installed?
And if I want to re-flash it again to another 6.5 ROM, can I just use this utility again, without hardspl selected, and without first downgrading back to WM5?
PS. I know my device is a G3, since I already flashed it (see above)
Thanks again.
HardSPL have number like this 2.G3.4PDA (for G3) or 2.G4.4PDA (for G4)... if you haven't HardSPL your device, you need to have HardSPL ticked before flashing. And if anything happen during flashing, your hope is to flash NVID flash.
If your device already HardSPL, you can just redo the flashing. No need to flash NVID unless HardSPL gets overwritten by stock ROM.
Hope this helps.
ps : lucky you .. G3 has more storage memory than G4 ... mine is G4 ...
So if hardspl is present, I should see something like SPL = 2.G3.4PDA at the bootscreen? This is not the case, I still see SPL 2.15.0000 like it did before the flashing. So I guess I don't have hardspl? But how can that be? I click on hardspl in the upgrade tool, and it didn't give an error message... Or do I need to add extra SPL files for this?
It's still unclear to me if I have hardspl installed or not :-( If it's "no", how could I have installed a cooked rom??? If it's "yes", how come I still see SPL 2.15.0000 at the boot screen?
Any help is appreciated!
From what I understand, bikertibi upgrade tools suppose to hardSPL the device but sometimes it seems to just load SoftSPL to the device so that it would temporarily make the device SuperCID? (will experimenting on this) Only SuperCID device can accept any rom. That's why if anything happen during the flashing, your device can only be recovered either by flashing specific CID (t-mobile/cingular/etc) rom or NVID (no specific vendor) rom if it doesn't HardSPLed. It will either reject the flashing process and the device will stuck in bootloader mode.
Since your device still shows SPL 2.15.0000 the answer is no, your device is not HardSPL. Cooked rom was flash successfully because SoftSPL in bikertibi 'tricked' the RUU to be SuperCID temporarily during flashing so it can finish writing a custom rom.
HardSPL for G3 can be download here : http://forum.xda-developers.com/showthread.php?t=353547
To flash a HardSPL, the device needs activesync/wmdc connection to load a special SoftSPL into the device before it can overwrite the stock SPL.
ps : I recommend you learn how to create SDcard dump if you don't want to HardSPL your device. This is because other than flashing stock ROM/NVID, your device can still be recovered using SDcard backup (it will overwrite everything including ipl/spl/os)
EDIT : Flashed my device to IPL/SPL 2.20.0001. bikertibi HardSPL ticked during flashing only send SoftSPL. Flashing was successful. Still need to flash HardSPL 2.G4.4PDA again after phone boots up normally to make it 'immune' from bricking
aze2learn,
Thank you very much for your help.
Indeed, after using the Prophet upgrade tools and activating "hardspl", hardspl was still not on the phone (so it must have used softspl). I installed it manually via the link you provided, and the SPL value changed! After that, I upgraded it to bikertibi's rom.
Very happy with the result.
Thanks again, I will also try the SDcard dump later.