Related
i have to get to work or i would write it again see here
If you dump it ill check it out. HTC released an update recently with some bug fixes which they may finally be releasing ota. Also logcat the download so we can find its source.
Apparently it is just a market update, I still haven't got it to reappear yet. I took down the post so as not to lead people astray.
so newer than: 1.86.631.1 ?
I can't seem to find the link to the update. Can someone point me to it?
i can't find the update either, i skipped it for the time being and now can't get it to pop up again. i didn't click the notification, just ignored it and restarted to backup .. thinking it might be a firmware thing, it was early and only coffee number one.
**edit: if you mean the link in my original post, that was a post on my blog but after realizing it might not be an android update i removed it.
hello all, i was away for awhile and things move so fast. after spending several hours reading i'm more confused than when i started. for example the aio toolkit is stickied thread but at the end it says it is banned? anyways. i received a new phone (replacement phone) and a new computer (amd with windows 8.1). i've flashed many times but not in 5-6 months. i know there were some issues with 8.1 when it first came out. since everything changes so fast i just need to be pointed in the right direction. what is the correct thread to follow for the latest rooting, recovery, flashing and s-off if necessary? thank you very much. looking to get back on the horse.
Does no one know the answer or is it a bad question? Throw me a bone.
Hi all
I have just bought a new Oneplus 6 and wanted to install Lineage Os.
I had initially set up the OP6 with my google account and installed some minimum apps over a couple of days. The phone updated a couple of times. I think I started on Android 8, it definitely updated to Android 9 and I think it updated to Android 10. But I am not completely sure of this because I did not take notice at that stage because I didn't realise that this might have significance..
I followed the guide from the lineaoge os wiki here
wiki.lineageos.org/devices/enchilada[
I got as far as using adb to Fastboot boot twrp-3.3.1-2-enchilada.img (which was the latest image in the dl.twrp.me/enchilada/
It then got stuck in the qualcomm crashdump line on screen.
I spent a day checking posts, including here on XDA. There are a lot of posts dealing with this issue and I did try to follow some of them with less or more success but no resolve. I downloaded Android 9.02 and used the following instructions
techtrickz.com/how-to/recover-oneplus-6-and-6t-from-qualcomm-crashdump-mode/
The routine started to run and then posted a series of error messages and exited. ( I have a screenshot of the terminal window but cannot see a way to post it here)
I have tried to research this further and there are plenty of posts and lots of suggestions. But to be honest I have become confused as some of the posts give significantly different solutions to each other.
I wondered whether it would be possible to give me some help or point me in the right direction to a post which is current and has the steps that I am likely to need succeed..
Thanks in advance for any help you can give.
grego34 said:
Hi all
I have just bought a new Oneplus 6 and wanted to install Lineage Os.
I had initially set up the OP6 with my google account and installed some minimum apps over a couple of days. The phone updated a couple of times. I think I started on Android 8, it definitely updated to Android 9 and I think it updated to Android 10. But I am not completely sure of this because I did not take notice at that stage because I didn't realise that this might have significance..
I followed the guide from the lineaoge os wiki here
wiki.lineageos.org/devices/enchilada[
I got as far as using adb to Fastboot boot twrp-3.3.1-2-enchilada.img (which was the latest image in the dl.twrp.me/enchilada/
It then got stuck in the qualcomm crashdump line on screen.
I spent a day checking posts, including here on XDA. There are a lot of posts dealing with this issue and I did try to follow some of them with less or more success but no resolve. I downloaded Android 9.02 and used the following instructions
techtrickz.com/how-to/recover-oneplus-6-and-6t-from-qualcomm-crashdump-mode/
The routine started to run and then posted a series of error messages and exited. ( I have a screenshot of the terminal window but cannot see a way to post it here)
I have tried to research this further and there are plenty of posts and lots of suggestions. But to be honest I have become confused as some of the posts give significantly different solutions to each other.
I wondered whether it would be possible to give me some help or point me in the right direction to a post which is current and has the steps that I am likely to need succeed..
Thanks in advance for any help you can give.
Click to expand...
Click to collapse
I would recommend using fastboot flashable stock rom from here. People also like to use msmtool, but I feel like it is an overkill.
Please note this warning:
These ROMs can't be used to update or downgrade your phone but just to restore your phone, so don't use them to come back to oreo or to update from oreo to pie.
So grab the latest oxygen os 10, and follow the instructions to flash it. After that, if you are feeling a bit paranoid maybe download a zip from oneplus and do a local update. You now should have your phone back.
Official TWRP does not support android 10 yet, as far as I understand, so that is probably the issue. If you want lineageos 16, you should downgrade to android 9 using a downgrade package provided by oneplus and then update to Oxygen OS 9.0.9.
There is unofficial twrp by mauronofrio that supports android 10. If you want to go from OOS 10 to some other android 10 rom
[email protected] said:
I would recommend using fastboot flashable stock rom from here. People also like to use msmtool, but I feel like it is an overkill.
Please note this warning:
These ROMs can't be used to update or downgrade your phone but just to restore your phone, so don't use them to come back to oreo or to update from oreo to pie.
So grab the latest oxygen os 10, and follow the instructions to flash it. After that, if you are feeling a bit paranoid maybe download a zip from oneplus and do a local update. You now should have your phone back.
Official TWRP does not support android 10 yet, as far as I understand, so that is probably the issue. If you want lineageos 16, you should downgrade to android 9 using a downgrade package provided by oneplus and then update to Oxygen OS 9.0.9.
There is unofficial twrp by mauronofrio that supports android 10. If you want to go from OOS 10 to some other android 10 rom
Click to expand...
Click to collapse
Thanks very much for your helpful reply. I am now back to a working phone with Oxygen os10. And you have also explained what was wrong when I tried to fix it, I was trying to load an Oxygen Os 9 on a phone that had already been upgraded to 10 and you have explained what went wrong in the first place, I was trying to flash an incompatible TWRP image onto Android 10. So your short post has explained a lot. Thank you.
I am not feeling paranoid unless you advise that I should be and I do want to install lineage os. So I need to revert to Oxygen Os9. I have looked on the Oneplus site and that have found the option to Upgrade to 10.3 but no option to downgrade. In the Oneplus community there is a link to downloadable ROMs, these are divided into a number of folders some of which look not applicable. There are three folders that look of interest
1. Signed flashable zips
2. OTA incremental update zips
3. Stock boot-recovery images
Here is the link /forums.oneplus.com/threads/oneplus-6-rom-ota-oxygen-os-mirrors-for-official-oxygen-os-roms-and-ota-updates.835607/
I can see it is not the OTA Incremental that I need but am unsure if it is signed flashable zips or Stock boot recovery images. or whether it is neither.
Do I flash as normal or would it be a local update?
I would be grateful for any further advice.
Thanks again and for any help provided now.
grego34 said:
Thanks very much for your helpful reply. I am now back to a working phone with Oxygen os10. And you have also explained what was wrong when I tried to fix it, I was trying to load an Oxygen Os 9 on a phone that had already been upgraded to 10 and you have explained what went wrong in the first place, I was trying to flash an incompatible TWRP image onto Android 10. So your short post has explained a lot. Thank you.
I am not feeling paranoid unless you advise that I should be and I do want to install lineage os. So I need to revert to Oxygen Os9. I have looked on the Oneplus site and that have found the option to Upgrade to 10.3 but no option to downgrade. In the Oneplus community there is a link to downloadable ROMs, these are divided into a number of folders some of which look not applicable. There are three folders that look of interest
1. Signed flashable zips
2. OTA incremental update zips
3. Stock boot-recovery images
Here is the link /forums.oneplus.com/threads/oneplus-6-rom-ota-oxygen-os-mirrors-for-official-oxygen-os-roms-and-ota-updates.835607/
I can see it is not the OTA Incremental that I need but am unsure if it is signed flashable zips or Stock boot recovery images. or whether it is neither.
Do I flash as normal or would it be a local update?
I would be grateful for any further advice.
Thanks again and for any help provided now.
Click to expand...
Click to collapse
I have had luck with this downgrade package. I basically googled it, the package is hosted on a legitimate website, so that's what I used. Just download it, put it on your phone and do a local upgrade through updater app.
Once you have done that I would recommend upgrading to the latest Android 9, which is OOS version 9.0.9 I believe. Then go ahead and follow instructions to install lineageos.
I am actually on LineageOS 16 + MicroG right now, so I ran into the same problems you did Glad I could help!
TexnoViking said:
I have had luck with //oxygenos.oneplus.net/fulldowngrade_wipe_MSM_17819_181025_2315_user_MP1_release.zip" downgrade package. I basically googled it, the package is hosted on a legitimate website, so that's what I used. Just download it, put it on your phone and do a local upgrade through updater app.
Once you have done that I would recommend upgrading to the latest Android 9, which is OOS version 9.0.9 I believe. Then go ahead and follow instructions to install lineageos.
I am actually on LineageOS 16 + MicroG right now, so I ran into the same problems you did Glad I could help!
Click to expand...
Click to collapse
Thanks so much for your reply again.
I used your downgrade link and that all worked well and then let it upgrade to OOS 9.0.9. Again all very positive.
I then tried to flash TWRP to the device using this image "twrp-3.3.1-2-enchilada.img" It appeared to flash okay. Then I issued the command
"fastboot boot twrp-3.3.1-2-enchilada.img" over my adb connection and it returned to the Qualcomm Crashdump error.
I presume I have to start again with the exception that this time I can use a flashable stock rom that is OOS 9.09? Is that correct?
Then do you have any suggestions for getting round the TWRP problem? Did you use a different version?
Thanks in advance for any help.
grego34 said:
Thanks so much for your reply again.
I used your downgrade link and that all worked well and then let it upgrade to OOS 9.0.9. Again all very positive.
I then tried to flash TWRP to the device using this image "twrp-3.3.1-2-enchilada.img" It appeared to flash okay. Then I issued the command
"fastboot boot twrp-3.3.1-2-enchilada.img" over my adb connection and it returned to the Qualcomm Crashdump error.
I presume I have to start again with the exception that this time I can use a flashable stock rom that is OOS 9.09? Is that correct?
Then do you have any suggestions for getting round the TWRP problem? Did you use a different version?
Thanks in advance for any help.
Click to expand...
Click to collapse
Hm. Yes, unfortunately the safest thing to do is to start again. But you can start with 9.0.9 right away.
People have been discussing a similar issue here. It seems like using unofficial twrp by blu_spark helps. Maybe twrp-3.2.3-x_blu_spark_v9.91_op6.img or maybe try the latest one.
Also, make sure you read the instructions on lineageos website. Make sure you have oem unlocked, usb debugging enabled and you clicked "always give access to this" device or something, do the fastboot set_active a. I have also used fastboot flash boot_a <recovery_filename>.img. However, I do recall using fastboot boot <recovery_filename>.img some other time and I think it worked....
Anyway, yeah, maybe try this modified recovery by blu spark and follow the instructions carefully.
TexnoViking said:
Hm. Yes, unfortunately the safest thing to do is to start again. But you can start with 9.0.9 right away.
People have been discussing a similar issue here. It seems like using unofficial twrp by blu_spark helps. Maybe twrp-3.2.3-x_blu_spark_v9.91_op6.img or maybe try the latest one.
Also, make sure you read the instructions on lineageos website. Make sure you have oem unlocked, usb debugging enabled and you clicked "always give access to this" device or something, do the fastboot set_active a. I have also used fastboot flash boot_a <recovery_filename>.img. However, I do recall using fastboot boot <recovery_filename>.img some other time and I think it worked....
Anyway, yeah, maybe try this modified recovery by blu spark and follow the instructions carefully.
Click to expand...
Click to collapse
Thanks very much for your helpful reply and apologies for the delay in my reply to this post, I have been tied up with work the last couple of days.
I did re-install OOS 9 and then followed the instructions on the Team Win site to install TWRP in the Oneplus6. I had success after I used the latest TWRP image and zip from that site . I was then able to install Lineage OS and Microg as I wished.
So thanks for the help all. Really appreciated.
grego34 said:
Thanks very much for your helpful reply and apologies for the delay in my reply to this post, I have been tied up with work the last couple of days.
I did re-install OOS 9 and then followed the instructions on the Team Win site to install TWRP in the Oneplus6. I had success after I used the latest TWRP image and zip from that site . I was then able to install Lineage OS and Microg as I wished.
So thanks for the help all. Really appreciated.
Click to expand...
Click to collapse
Great! I am glad you managed to fix your phone! Enjoy
I've searched and soft bricked and restored via msm and even got twrp on one time. Is there a straight forward guide anywhere that shows the process of going from stock TMobile android 10 or 11 to the global device software? Im either misunderstanding it or just can't find it. The one guide that i thought was correct was good all the way until it got to the part where it said not for branded devices but there's not actually a link that leads to a section to do branded devices. Please help as this thing is almost unusable on mint mobile with the current stock rom.
I mean I know there is the wip guide in the other forum. But I can't seem to get out of crash dump or fastboot loop so I figured maybe that's the wip part of it?
I can't stress enough to read, read, read. There are not that many threads here so it should be pretty easy to do. I'm posting the link to convert to global for you. Used it many times. In fact I used it this weekend. Happy modding!
[ROM][STOCK][FASTBOOT][OP8] Stock Fastboot ROMs for OnePlus 8
Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are...
forum.xda-developers.com
.
i dont know if you have been succesful yet or not but the WIP guide is the way to go. Like you i kept getting flash dump error then flash back to t-mobile and very frustrated.
but if you read through the forum with the wip guide, somewhere it mentions that you have to first flash an earlier t-mobile version of OOS then you can flash the same version Global OOS and just like that it worked for me. After you can upgrade to the latest.
i hope that helps.
Hi everyone I just got a lg Stylo 6 from boost. I was hoping that as I picked mine up for pennies(50$) that there would be a way already spoken, that doesn't seem to be the case. I heard that taking KDZ rom info and splice the original r software and patch it through magisk. This can be don? I hope so . But what I was going to do was start a thread that supports having a TWRP
Built for it would be better, I've got (40$) onit being a new created re covery would be better, idk I haven't been online in years since
The J3 emerge was the last thing I worked on as a tester, that I could get a gang of people needing the TWRP too. Anyone down?? (7876006741) that's my work number for phones and like minded things. So anyone down to start this new project let me know I'll hit up Ashyx when I get enough behind it. Thanks
Its looking like there is gonna be a flood of people now needing a TWRP for the Stylo 6 now there is a bootloader unlock & root-I myself being one. Start(if you wish) to post what you need & lets get this baby rollin'!!!
I tried to contact twrp them selves but like they say on their site they rarely respond and I've got no response, I've used Hovatek's twrp porter tool and I've not had any success. My discord group is nearly done with the V60 twrp and I might be able to get the developer working on that to build one. I've got no experience building a twrp myself or else I'd give it a shot, but being a mediatek device with a-b slot It will be more difficult than a regular custom recovery build.
Warlockguitarman said:
I tried to contact twrp them selves but like they say on their site they rarely respond and I've got no response, I've used Hovatek's twrp porter tool and I've not had any success. My discord group is nearly done with the V60 twrp and I might be able to get the developer working on that to build one. I've got no experience building a twrp myself or else I'd give it a shot, but being a mediatek device with a-b slot It will be more difficult than a regular custom recovery build.
Click to expand...
Click to collapse
You're quite the intellegent fella. Have you tried to make any custom TWRP recoveries for any mediatek based chip-ed devices? (almost typed chipset. )
At this point, I wouldn't even care if Stylo 6 ever got a TWRP. Outta give it a try to a custom one yourself and see if you can add a new feather in your cap, war-locked guitar man? (ok ok, will never make fun of the awesome name again. Old habits, never feed the trolls after midnight!)
Whoops, just ran across this after the comment from earlier. This answers my question, I retract my previous comments and questions. Wish you a good day, dude.