Database Info

Swedish hardware keyboard error

I was wondering if anyone can help me with my Swedish hardware keyboard mapping? I downloaded the cooked wm6rom but my keybord doesnt work right on the fn +key. The layout on the orginal swedish keyboard is in this link on page 50 http://www.htc.com/support/pdf/htcty...Manual_web.pdf I want to map my keys as it shows on the link, how shall I do that?

Hi there, I wonder if you've managed to find out what the hex key for swedish is?

I found the list of all languages at: http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx
... and inserted "1053" for swedish, but this didn't help, my hardware keyboard is still messed up. Anyone got another hint?

I beleave i can make a CAB to let you use sweden dictionary and keyboard map correctly...
I'l do when i have some time and post here http://forum.xda-developers.com/showpost.php?p=1673274&postcount=2
Cheers.

jcespi2005, that would be most kind of you. Many thanks in advance!
Edit: jcespi2005 - I tried with the norwegian keyboard instead, and that did the job! Thank you very much anyhoo.

mape78 said:
I found the list of all languages at: http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx
... and inserted "1053" for swedish, but this didn't help, my hardware keyboard is still messed up. Anyone got another hint?
Click to expand...
Click to collapse
HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD\CurLang 1044 to get Swedish keyboard

Added the CAB here http://forum.xda-developers.com/showpost.php?p=1673274&postcount=2
Can someone test it and say me if works.... thanks....

jcespi2005 said:
Added the CAB here http://forum.xda-developers.com/showpost.php?p=1673274&postcount=2
Can someone test it and say me if works.... thanks....
Click to expand...
Click to collapse
I have tested it and it does not work, it makes the CurLang value in the registry to 1053, and even though that is Swedish it does not work. My Swedish Tytn II arrived with that value set to 1044 - norwegian bokmål. When setting it to that value it works. So the keyboard does not work, but the dictionary seems to be Swedish and is working So just a small adjustement and it will be fine

easycure1974 said:
I have tested it and it does not work, it makes the CurLang value in the registry to 1053, and even though that is Swedish it does not work. My Swedish Tytn II arrived with that value set to 1044 - norwegian bokmål. When setting it to that value it works. So the keyboard does not work, but the dictionary seems to be Swedish and is working So just a small adjustement and it will be fine
Click to expand...
Click to collapse
Many thanks again for testing work
You mean 0414 hex or 1044 dec i suppose... so the keyb is like Norwegian_Bokmal one in the sweden Kaiser
I correct the registry value and upload again....
Cheers.

jcespi2005 said:
Many thanks again for testing work
You mean 0414 hex or 1044 dec i suppose... so the keyb is like Norwegian_Bokmal one in the sweden Kaiser
I correct the registry value and upload again....
Cheers.
Click to expand...
Click to collapse
Now it is working fine
Even tough you Spaniards beated us Swedes in the soccergame yesterday I will forgive you because of you nice work here at XDA

easycure1974 said:
Now it is working fine
Even tough you Spaniards beated us Swedes in the soccergame yesterday I will forgive you because of you nice work here at XDA
Click to expand...
Click to collapse
Yes, great match, spanish players did a great work.... but is only football, you know, life is more than football
Thanks.

jcespi2005 said:
Yes, great match, spanish players did a great work.... but is only football, you know, life is more than football
Thanks.
Click to expand...
Click to collapse
I can nothing more than agree on all abowe

Thank u jcespi2005 for your great work with our language settings. Will your cab's also change the software keyboard to the selected language?

mape78 said:
Thank u jcespi2005 for your great work with our language settings. Will your cab's also change the software keyboard to the selected language?
Click to expand...
Click to collapse
Nop, only hardware keyboard. For soft keyboard ussually used the Resco Keyboard with multilanguaje support.
I'll take a look to see if is easy change the soft keyboard replacing some DLLs...
Cheers.

mape78 said:
Thank u jcespi2005 for your great work with our language settings. Will your cab's also change the software keyboard to the selected language?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=1150091&postcount=97
use this to get free Swedish software keyboard

jcespi2005 said:
Nop, only hardware keyboard. For soft keyboard ussually used the Resco Keyboard with multilanguaje support.
I'll take a look to see if is easy change the soft keyboard replacing some DLLs...
Cheers.
Click to expand...
Click to collapse
hello jcespi2005! can you help with similar problem on keyboard layout. i flashed docomo ht-01a to english rom but keyboard layout is messed up. your help will be much appreciated. thank you in advance.

jcespi2005: Could you (if you have time) have a look at making a similar cab for the Samsung i780? The cab you did before doesnt do it, looks like the registry is setup otherwise
Would really appreciate this!!

keyboard problem

hello people
if got a little problem white my keyboard on my cruise
i did an update to wm 6.1 nld on the official htc site
everything works good but i think is much to slow
so i downloaded 3LIT3_VIII_Full_NLD and installed it
but now my keyboard doesnt work 100%
i can use the qwerty keyboard without problems
but when i want to use the xt9 keypad then i can only type numbers
character or alphabet doesnt work
can somebody give me an answer please
thank you greetz pet

Try this!
http://www.4shared.com/file/112390528/29099d60/BJK_HTC_EzInput_QVGA_NoKbd_0409-RC2.html
from this thread : http://forum.xda-developers.com/showthread.php?t=426281&highlight=BJK_HTC_Ez%2A
When you have numbers, than change to a other keyboard and write one or two words. after this, you change the keyboard again and it works.
If have the same problem with gullum Ez 1.5 keyboard. Now i have BJK Keyboard and german language pack and it works fine

XDANoob said:
Try this!
http://www.4shared.com/file/112390528/29099d60/BJK_HTC_EzInput_QVGA_NoKbd_0409-RC2.html
from this thread : http://forum.xda-developers.com/showthread.php?t=426281&highlight=BJK_HTC_Ez%2A
When you have numbers, than change to a other keyboard and write one or two words. after this, you change the keyboard again and it works.
If have the same problem with gullum Ez 1.5 keyboard. Now i have BJK Keyboard and german language pack and it works fine
Click to expand...
Click to collapse
Thank you problem solved

Topaz (Diamond 2) hebrew support and hebrew interface TF3D

Hello.
it took me about 3 whole days and lots of HR to get a working hebrew support.
every cab i've installed either gave me reversed text of good text but when i wrote i could not see what i am writing.
i finally found a hebrew support that works but when i install the hebrew translation for the touch flow 3d the sms tab is not working and also when i try to go messeging in the original way...
any idea?
Thank you!

i use this hebrew and its working for me with every rom and with opera builds 15529, 15746.
for manila try MUI file attached it should work for manila 2.0 & 2.1
HR
install hebrew.cab
SR
install MUI
SR

i'll try...
thank you very much!

Does the MUI fix the opera Hebrew?
I have ROM 6.5
thanks,

erezsegev said:
Does the MUI fix the opera Hebrew?
I have ROM 6.5
thanks,
Click to expand...
Click to collapse
opera work only some builds,
15529 & 15746 working good.

Oh learn a lot thank you

I'm waiting for the final version of Dorothy browser. It has great potential, and hebrew works well.

btw, is there a solution for the orientation of the text in "notes" ?

can i change the default opera build that is in the interne tab to work with hebrew?
thank you!

bnm7bnm said:
opera work only some builds,
15529 & 15746 working good.
Click to expand...
Click to collapse
It changed the whole GUI to Hebrew,
opera still L to R.
I now can not uninstall that.
How do I change back to English?
(Regional settings does not help)

I foundout that in the "notes", when you press enter the order of the words in the line above is corrected.
It's not a real fix or any thing, but it's a "nice to know".

[I9003][Problem] Contact search problem driving me CRAZY :-S

Hi All,
I'm using I9003 with JPKE1 2.2.1 in English locale with Arabic enabled, when using the dial pad to search a contact, it only shows English names, doesn't search Arabic names, so I need to go to contacts and search by the qwerty keyboard which is noisy, I cant rename contacts to English since I have more than 600 contacts, anyone knows how to enable the dial pad to search contacts saved in language other than English?
Thanks...

i have not tried ur rom. I think there should be support by phone for such feature. May be in the next official gb rom they will support these features.

Your basic phone language is Arabic,right? Like you can change it in Settings->Locale and Text-> Language...If it is Arabic there..It will display Arabic contacts when you search using Dial pad... My friend tried this with Russian..It worked! Tried it out and tell me the results!

bangalorerohan said:
Your basic phone language is Arabic,right? Like you can change it in Settings->Locale and Text-> Language...If it is Arabic there..It will display Arabic contacts when you search using Dial pad... My friend tried this with Russian..It worked! Tried it out and tell me the results!
Click to expand...
Click to collapse
The phone interface language is english, my rom is contains Arabic Interface... but after Deodexing it the arabic interface (arabic menues and icons and stuff) disappeared but still can read and write english :-S

If you set your language as Arabic, I seriously don't know how you can *WRITE* English? Your keyboard language should also be Arabic,right?

bangalorerohan said:
If you set your language as Arabic, I seriously don't know how you can *WRITE* English? Your keyboard language should also be Arabic,right?
Click to expand...
Click to collapse
Im just enabling Arabic keyboard to write Arabic in addition to english keyboard and everything is ok, the problem only when searching with T9 dialpad

How can i install language keyboard?

Hello to all..
i just bought the new nexus s 9023 . i want to install greek keyboard inside the messages . how can i do that? please help me.

If the phone doesn't support the language natively, you'll have to download an alternative keyboard from the Market. I think SwiftKey has greek language support.

Try Go Keyboard. It supports Greek and its for free.

Nah...
Both , are ... hmmmm how can i say that ?
I don't like them their interface.

AccountSaver said:
Nah...
Both , are ... hmmmm how can i say that ?
I don't like them their interface.
Click to expand...
Click to collapse
Anyway, you get the idea, huh! Just look for a keyboard you like.

I Haven't find anything yet.
Is anyone from Greece , that has a similar keyboard better than the original ?

i use swiftkey x which supports greek with (not always successful) autocorrection. also, it's not free, although i'm not sure if it has a free version
other than that, to get the stock keyboard with greek support you'd need to cook your own stock keyboard apk or find someone who has done this.

I use smart keyboard pro on my i9023 and have done that with every android ive had over the last few years.
good solid keyboard.