ok..well i cant find it..does anyone have this splash screen??? - Touch Pro, Fuze General

hi everyone again, well today i wanna change my Fuze boot screen to the ORIGINAL bootup(the one u get with the unlocked one) does anyone have or know where to get it, i just need the gif most likely, if not then the regular bootup files are fine, theres a video of what im trying to look for since i searched for it deeply but couldnt find it
http://www.youtube.com/watch?v=eNmmco36yOE&feature=related
exactly like that one but with Touch Pro instead^^^^^^^
thanks

anyone? im still searching for it around the forums and the net but no luck still

Grab the Raphael_HTCHSplash.zip:
http://forum.xda-developers.com/showthread.php?t=436105&highlight=pfcsabre+splash#1
Grab the RaphaelCustomRUU.zip:
http://forum.xda-developers.com/showpost.php?p=2709600&postcount=1
Flash the nbh with CustomRRU
enjoy

thanks alot bro!! well anyways what if i wanted to revert back to the original AT&T flash, do i make a backup if so can i use Sprite backup?

ATT Default Splash Screen

thnnx ALOT again, ure a life saver, just one problem, the RaphaelRUU, when i download it, my AV shows it as a trojan and it never finishes the download :/ do u have any solutions? lol sorry if this is too much

That's a known issue. Easiest thing to do is either restore the file from your AV quarantine, or disable AV then download and add an exception for that exe file.

thank you soo much and one more question is that the AT&T splash the one when u first got it??

btw im doing what it says and the meter is stuck to 0% idk what im doing wrong is there alternative way of how to do it?

Related

Reverting to official RUU with HardSPL

I have been searching all over for this but it's probaly right in front of my face. I read that you need to get rid of SPL.nbh from official ROMS before flashing back with HardSPL. The problem is, the official T-Mobile Wing ROM that I downloaded is an .exe file. How do I go about removing the SPL.nbh file since it doesn't display folder contents or anything, just runs the RUU?
Sorry for the double post, I realized I was in the wrong forum
flipside123 said:
I have been searching all over for this but it's probaly right in front of my face. I read that you need to get rid of SPL.nbh from official ROMS before flashing back with HardSPL. The problem is, the official T-Mobile Wing ROM that I downloaded is an .exe file. How do I go about removing the SPL.nbh file since it doesn't display folder contents or anything, just runs the RUU?
Sorry for the double post, I realized I was in the wrong forum
Click to expand...
Click to collapse
I'm uploading a zip file which will have the entire thing already to go.
Just flash your device as you would with any other rom.
Hang tight the link will be available within 10 mins.
Thank you sir. Greatly appreciated
flipside123 said:
Thank you sir. Greatly appreciated
Click to expand...
Click to collapse
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
One more question. I'm looking to keep HardSPL but I have to revert to original to upgrade ROMS don't I? I want to upgrade to your OT 6.5 ROM
flipside123 said:
One more question. I'm looking to keep HardSPL but I have to revert to original to upgrade ROMS don't I? I want to upgrade to your OT 6.5 ROM
Click to expand...
Click to collapse
Okay,
I thought you wanted to go back to the original T-Mobile rom.
If your trying to HARD-SPL your device to install one of my roms or another cooks roms then thats another story.
Please read my FAQ or one of the stickies.
Ok, I think I got it now. So I don't need to revert to the original ROM to flash it since I have HardSPL? Thanks for the help
wen i did this i think i bricked my fone now its at the tmobile screen and it jus staying there
I tried the file that you uploaded here...And it went thru the whole process of flashing the ROM, but after it updated my wing just stays on the T-Mobiel screen and never boots past that.
It had that open touch software on it and I don't want open touch. I want plan old WM 6.0 on there.
I called T-Mobile and got an offical 6.0 update from them, but when I try that one it gets to 1% then says it has a disconneted and I get a connection error.
ttran001 said:
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
Click to expand...
Click to collapse
So does this work? The two people who did this had problems. I need the phone to be all stock so I can have t-mobile send a free replacement because the screen is going on this wing.
***EDIT:*** Oka so this is the same as http://forum.xda-developers.com/showthread.php?t=364543&page=2 the first time I tried it it froze at 15% on step 2 so I installed the RAPI CAB like it says. Step two completed, phone rebooted and had white screen then I got error 260 I think. I have the stock t-mobile rom on it and had it on before I did this but it still has the yang from when I did a hard spl. Is there another way to get it to stock or am I doing something wrong? Plug in phone, let it sync, run herald-uspl.exe hit enter and so forth.
***EDIT*** Ok so this time it completed but is now stuck at the T-Mobile screen and I am now unable to even flash because I can't get past it And that damn yang still shows up in bootloader. Well went into bootloader and flashed from there so phone works but the damn yang is still there. And on a side note: Has anyone ever had a problem with their screen going very dark after flashing a rom from here? Phone was fine then I flashed OTP v7.4 TouchFlo 2D Lite.nbh yesterday and at night screen started going dark, would light up when opened in keyboard mode, then switched and then both were very dark and hard to see. I then flashed to OTP v7.3.1 TouchFlo 2D Final.nbh and still dark. Then I flashed to stock rom and have been able to see the screen since.
This is stupid easy to do... im shocked there isnt a post going into detail.
5 steps to going back.
http://forum.xda-developers.com/showpost.php?p=2998657&postcount=4
smokeingit said:
This is stupid easy to do... im shocked there isnt a post going into detail.
5 steps to going back.
http://forum.xda-developers.com/showpost.php?p=2998657&postcount=4
Click to expand...
Click to collapse
Did not work. Do I need to install the cab files again? I know I deleted a file out of the stock rom so it would not overwrite or verify or something but I put that file back, should I not have? This has been a few weeks and still can't get the yang off. Screen on my girls phone is almost dead, she can't even slide it any more so I need to fix the spl so I can send back to t-mobile....anyone ?
this is what i do to get back to the tmobile orginal. download the software from tmobile. I downloaded the newest update from tmobile site. REMOVE YOUR SD CARD. Connected my phone via usb. Launched the update. It has never failed me yet. It is just like updating your phone. tmobile has to take it, it is their update. They sent me a new phone noproblem, matter of fact i have to do it again, the back on the phone keeps getting loose on me. so they are sending me another phone again. hope this helps.
Alternatively you can use the combination of uspl and stock rom ruu to return your device to stock tmobile rom...
1. Enter in to uspl like you were falshing one of ttran001 roms... You can get this HERALD-USPL-beta3 from http://rapidshare.com/files/79249048/Flash_Center.rar
2. ONLY use steps 1 and 2 from the black screen (getting the white screen on your device)...
3. For step 3 in the flasher exit out of the black screen (windows cmd screen) by pressing ctrl+C...
4. Fire up the official ruu from tmobile found here http://forum.xda-developers.com/showthread.php?t=358030 or alternatively if you have a tmobile account still active you can get the most up to date rom from http://www.t-mobile.com/wmupgrade/
5. Fallow on screen instructions...
6. Back to stock rom...
Brick dopod C858
ttran001 said:
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
Click to expand...
Click to collapse
Hello freind,
I have been downloaded the above "Remove_HARD-SPL_On_The_Wing.rar" files and flash it to my Dopod C858 which has the Chiness language, I suppose to change the language from chinesse to Englis, After flashing the above files, now the phone is only in bootloader mode.
If you start the phone it will stuck on white screen and turn off.
Please help me how to revive my phone back.
Thanks and best regards
Jhemzz
Hey I'm having the same problem as most of these guys who tried the file. The phone just idles on the white Tmobile screen... does anyone know what to do or how to help?
Please and thank you!
angest90 said:
wen i did this i think i bricked my fone now its at the tmobile screen and it jus staying there
Click to expand...
Click to collapse
im having the same problem can anyone help me please?
hotsammysliz said:
im having the same problem can anyone help me please?
Click to expand...
Click to collapse
Being stuck at the Tmobile screen isn't a true brick. Just reflash your ROM. (If you're not HardSPL'd, reflash your RUU.)
Remove Hard SPL from bootloader
Hi,
Anyone out there knows if we can remove hardspl from bootloader of Wing. Problem is my mobile displays splash screen, then switch offs by itself. Its been quite some time that I have hardspled it and have been using it. But recently I am facing this issue, so I am trying to move to original RUU and try if it works.
So for that anyone knows if we can remove hardspl from bootloader, because I am only able to enter bootloader. Moreover I tried several original roms from Flash Center as well as through SD card as well, but still be SPL version is 4.70.yang. Anyone knows any other alternative.
Also, if anyone has faced similar problem then kindly advice how you resolved.
Thanks in advance!
Regards,
Pankaj

Help! Need i910 eboot!

I've done something incredibly stupid! I've flashed an i900 1.37 bootloader to my i910. Luckily, it still says "Samsung" on the screen and will let me flash from Grand Prix. Now, I just need an eboot.nb0 for an i910, but I can't find one anywhere, and I can't figure out how to extract one from an existing ROM.
Someone please help!
Hummm
I did the same thing, but i got my partial phone back.
I have flashed back to the same rom and my phone still lives out of the annoying omnia screen that will freeze it. Am glad i didn't brick it.
All i need to do now is find the eboot for the i910.
PLS let me know if any luck!!!

OMG...did i brick my phone?

Ok...so my tp2 is verizon and I did the whole hardspl thing and somehow got the energyrom leo on my fone, and then wen i tried to update to the new sense 2.1 extreme rom, i dont know wat happened. It said to use this custom ruu thing which i clicked on, and wen it updated my fone, my fone does absolutely nothing now cept loading the start screen where it says Touch pro2
I new something was wrong becus at no point was the .nbh that i extracted used, but no ruu came with the file that i downloaded...sighhh so is my fone dead or wat? I tried hard resetting, and although i am able to get to the hard reset page, wen i actually do it, it still just freezes where touch pro2 screen comes out
dont trip
i've 'bricked' most of my phones i've played with at least once. If your getting anything your ok - go to boot loader mode, reflash the original rom on it, then the one you want. Make sure your battery has a good charge also ^^
starscalling said:
dont trip
i've 'bricked' most of my phones i've played with at least once. If your getting anything your ok - go to boot loader mode, reflash the original rom on it, then the one you want. Make sure your battery has a good charge also ^^
Click to expand...
Click to collapse
ok so im uploading this rom rite now http://forum.ppcgeeks.com/showthread.php?t=91940..the verizon one, once i get that do i have to do the hardspl thing again? btw thanks so much for the bootloader thing, i didnt know how to do it, i kept doing the hard reset..lol
* i got the stock rom back, thanks alot...do i need to hardpl it again? could sum1 help me flash to the another rom as well, i just dont know wat to do wit the nbh
fjgotgame24 said:
ok so im uploading this rom rite now http://forum.ppcgeeks.com/showthread.php?t=91940..the verizon one, once i get that do i have to do the hardspl thing again? btw thanks so much for the bootloader thing, i didnt know how to do it, i kept doing the hard reset..lol
* i got the stock rom back, thanks alot...do i need to hardpl it again? could sum1 help me flash to the another rom as well, i just dont know wat to do wit the nbh
Click to expand...
Click to collapse
it wouldnt hurt. Just pretend youve never done anything to the phone.
Write or type out a list of steps for each phase
print it out and cross them off one by one.
thanks
Thanks my TP2 now is working
orobas said:
Thanks my TP2 now is working
Click to expand...
Click to collapse
sweet
just had the black screen of death - lol was like - THE THREAD OF DEATH CURSED ME :> [all good now of course]
Failed flashing with CustomRUU.exe
Every flash has failed (freezes at "Touch Pro2" boot screen) when I tried to use a ROM that uses CustomRUU.exe (Miri, Cell_Pro, Athine, AF, Shadowline, and others). Flashing ROMs that use ROMUpdateUtility.exe already extracted flash fine. I've even tried first flash the original Sprint stock ROM and then flashing a "CustomRUU" ROM but without success. I've also extracted the files from the CustomRUU.exe and then run it with the nbh file but that doesn't work either. HTC Touch Pro2 (Sprint)
Any suggestions?
-Scott
scottGx said:
Every flash has failed (freezes at "Touch Pro2" boot screen) when I tried to use a ROM that uses CustomRUU.exe (Miri, Cell_Pro, Athine, AF, Shadowline, and others). Flashing ROMs that use ROMUpdateUtility.exe already extracted flash fine. I've even tried first flash the original Sprint stock ROM and then flashing a "CustomRUU" ROM but without success. I've also extracted the files from the CustomRUU.exe and then run it with the nbh file but that doesn't work either. HTC Touch Pro2 (Sprint)
Any suggestions?
-Scott
Click to expand...
Click to collapse
You're flashing CDMA ROMs, right? Not the GSM only ones found here, but CDMA ones from elsewhere, like here? Try flashing one of the CDMA ROMs found at the second link, and see if that works, because I think you may be flashing GSM ROMs onto your CDMA device, which would explain why it flashes, but doesn't boot properly. Hope that helps
DaveTheTytnIIGuy said:
You're flashing CDMA ROMs, right? Not the GSM only ones found here, but CDMA ones from elsewhere, like here? Try flashing one of the CDMA ROMs found at the second link, and see if that works, because I think you may be flashing GSM ROMs onto your CDMA device, which would explain why it flashes, but doesn't boot properly. Hope that helps
Click to expand...
Click to collapse
Apparently, I was flashing a GSM ROM. There really should be better indication of what the ROM is designed for than simply being in a particular form. It wouldn't be any trouble to add a few characters (GSM/CDMA) to the file name to make it clear.
Thanks!
My Verizon tp2 is stuck on the TOUCH pro2 screen when it tries to boot.. It will not hard or soft reset. So it's not being recognized by my pc to do the hardspl thing. I was trying to flash the perfectblack rom but it said it was not for my device...so i tried Energy rom.. it flashed but will not boot.. please help...how do i fix this.
Well...I took it back to Verizon...they are sending me another one. Have to figure out what I did wrong because I truly wanted to try a cooked rom or two.
Back to the drawing board.
defiantone said:
Well...I took it back to Verizon...they are sending me another one. Have to figure out what I did wrong because I truly wanted to try a cooked rom or two.
Back to the drawing board.
Click to expand...
Click to collapse
Wait, you are sending Verizon your phone with a non-booting cooked ROM and the HSPL on it?!?
If they figure that out, there's a good chance you'll be SOL.
dwizzy130
dwizzy130 said:
Wait, you are sending Verizon your phone with a non-booting cooked ROM and the HSPL on it?!?
If they figure that out, there's a good chance you'll be SOL.
dwizzy130
Click to expand...
Click to collapse
Exactly. Even if you have insurance on the TP2, if you sent it back with anything that is not stock, your insurance is probably voided, they probably wont give you your phone back, and you might even have to pay full price for a new one. Good luck man. Definitely should have held out for some responses before you sent it out. If you haven't then that's good, but if you did, your probably out of luck.
defiantone said:
Well...I took it back to Verizon...they are sending me another one. Have to figure out what I did wrong because I truly wanted to try a cooked rom or two.
Back to the drawing board.
Click to expand...
Click to collapse
Why didn't you try what the orginal poster did?
I loaded a GSM rom on my Sprint TP2, I wasn't paying attention to the orginal
Post and just thought oh.. I want this rom..
What I did,
Turn on the device while holding down the Power button and the Volume Down key. If you see Serial and 3-4 colored bars plug in your USB, and reflash with a CDMA Rom.
This fixed my Phone. Credits to the gurus at PPC Geeks. if i find the topic later I'll post it.
*edit: nevermind
*edit: problem resolved

am i screwed?

if i flashed a gsm radio on a cdma? jus curious cuz i did that
Get your operators ship rom, then flash it via SD card. Reflash HardSPL and then flash a CDMA rom.
Oh dear. I could be wrong, but I seem to remember when someone has done that before, the phone was bricked (i.e. flashing the wrong radio, not just the wrong ROM). I do hope I'm wrong.
steviewevie said:
Oh dear. I could be wrong, but I seem to remember when someone has done that before, the phone was bricked (i.e. flashing the wrong radio, not just the wrong ROM). I do hope I'm wrong.
Click to expand...
Click to collapse
****, I read that too fast and didn't read radio. Yeah, bricked. /end
Hi didn't say he did it, the title "Am i screwed?" "if i flashed a gsm radio on a cdma? jus curious cuz i did that "
-----------------------------------------then he put
I think he needs to repost in ENGLISH please. I cannot undrstand if you flashed it or not, therfore meaning i cannot help
Badwolve1
Badwolve1 said:
Hi didn't say he did it, the title "Am i screwed?" "if i flashed a gsm radio on a cdma? jus curious cuz i did that "
-----------------------------------------then he put
I think he needs to repost in ENGLISH please. I cannot undrstand if you flashed it or not, therfore meaning i cannot help
Badwolve1
Click to expand...
Click to collapse
He said "cuz I did that", i.e. he *did* flash a GSM radio onto a CDMA device.
Suppose, but I would of expected a n00b to of posted something more like
"HELP!!!!
I flashed a sprint radio to my Tmo TP2 and now it wont turn on
PLZ PLZ PLZ HLP ME!"
he seemed rather calm
thanx for posting, well i thought i broke my phone a couple of days ago prior to this bcuz my phone turned off out of nowhere and wouldn't come back on even after being charged for an hr. then it turned on a couple hrs later when trying again. (dont ask me how bcuz Ive never had this problem before) and yes i did flash the wrong radio so im done for right? the reason why im being calm is cuz i thought i was gonna have to replace my phone in the first place. i was hopefully wishing on the inside for a miracle
nom303 said:
thanx for posting, well i thought i broke my phone a couple of days ago prior to this bcuz my phone turned off out of nowhere and wouldn't come back on even after being charged for an hr. then it turned on a couple hrs later when trying again. (dont ask me how bcuz Ive never had this problem before) and yes i did flash the wrong radio so im done for right? the reason why im being calm is cuz i thought i was gonna have to replace my phone in the first place. i was hopefully wishing on the inside for a miracle
Click to expand...
Click to collapse
Well, unless someone comes forward and says otherwise, I'm sorry to say yes, I think you're done. In the past one or two people have posted up a similar scenario and I don't recall them posting to say they fixed it.
It might cost you less than replacing your phone if you pay for your phone to be repaired.
Well possibly not. IF you can still get into bootloader (hold the volume down button when powering on or if device is already on hold down volume down and softreset) first LOOK AT THIS TASK 29 POST HERE BUT DONT DO ANYTHING YET!:
http://forum.xda-developers.com/showthread.php?t=649191
Make sure to download the file provided, extract it to wherever.
Now goto this post here:
http://forum.ppcgeeks.com/showthread.php?t=90342
and download the correct radio for your provider.
Replace the NBH file from the TASK 29 threads package you extracted with the one from your provider.
Run the task29 as instructed.
Once its done it wont boot into a rom you need to go back into bootloader like I told you how before (Volume down and reset) now find your providers stock rom from here:
http://forum.ppcgeeks.com/showthread.php?t=91940
and flash that rom to your phone. Hopefully this will resolve your issue, best of luck to ya mate.
To anyone ready to post disagreeing: Please dont post up saying about task29 and saying it wont work and stuff, I have fixed two worldphone this way because the owners did exactly what he did, in the way I described here.
thanx aestivalisakito im willing to try what your taking about. have a couple of questions tho. its not that im making it go into bootloader. when i hit power it goes str8 to it. could that be a problem for this fix?
my screen sticks at the multi colored screen with writting in the background saying" code error please try again".and i noticed that, one time while powering on b4 getting stuck. it, for a split sec. try to go to the grey screen to flash and says "loading No image found" then back to multi colored screen. does this help any?
also can i use task29 thru sd card?
thanx for your help
nom303 said:
thanx aestivalisakito im willing to try what your taking about. have a couple of questions tho. its not that im making it go into bootloader. when i hit power it goes str8 to it. could that be a problem for this fix?
my screen sticks at the multi colored screen with writting in the background saying" code error please try again".and i noticed that, one time while powering on b4 getting stuck. it, for a split sec. try to go to the grey screen to flash and says "loading No image found" then back to multi colored screen. does this help any?
also can i use task29 thru sd card?
thanx for your help
Click to expand...
Click to collapse
Ahh it appears you weren't that clear. If you get into the multi-coloured screen, you are at bootloader. Download a rom from http://wiki.xda-developers.com/index.php?pagename=HTC_Rhodium/Shipped_Roms to get your original shipping rom. Once you have done this, put the nbh on the sdcard named as rhodimg.nbh. Reboot back into bootloader mode. This should then get you able to flash the device with all the proper stuff.
Make sure to get the one for YOUR original provider.
thanx i got it fixed. someone helped me on another forum with the same solution and it worked thanx for ur reply
nom303 said:
thanx i got it fixed. someone helped me on another forum with the same solution and it worked thanx for ur reply
Click to expand...
Click to collapse
Awesome. Glad everyone helped you get your phone back. Just be more careful next time. Cheers!
so all you did was SD card flash an original ROM from your carrier? just asking for future reference.

[Q] HTC HD2 CYANIGENMOD7 ANDROID TO STOCK WinMO 6.5 - HELP!!

Hello, guys.
Well, I love android and all, but I have had problems. Overheating problems for the most part, followed by freezes. I love my HTC HD2 too much for letting the problems occure or continue experimenting, since I'm new to the flashing-scene and
stuff.
I'm really looking into getting it back to stock. Can anyone please help? Obviously, I will need the HSPL to be original and everyting.
I have made 2 different ext. partitions I think on the SD card.
Can anyone please help? Any detailed help is HIGHLY appreciated.
BTW: My phone is LEO 512 MB, EUROPE VERSION, not T-mobile! Thanks!!
BUMP!!
Anyone? I'm really in need for this. I would like appreciate some help on this one, guys!
hey there,
to flash your hd2 back to stock windows 6.5 you need the original rom from the htc website. go in the UK version of the website, go to the bottom and select region as United Kingdom. Then click the help button. then select the hd2. go into new and downloads. download the rom upgrade for HD2. make sure you download the normal one, i mean NOT the one for o2 or T-Mobile or stuff like that. once you download the file, power down your fone. then turn it on with the volume down buttone and power button firmly pressed. dont let go until you see a red, green, blue and white screen. this is the bootloader. connect your hd2 to your computer via the usb cable. the "serial" word will change to "usb". all you need to do now is run the rom upgrade you downloaded earlier. run the file. folow the on-screen instructions and VOILA. u r back to stock hd2 with windows 6.5 Let me know how it goes and give me a thanks if u found this useful.
Post this in the dedicated HD2 forum, and you are bound to get more help.
Sent from my HTC Desire S using xda premium
adil1508 said:
hey there,
to flash your hd2 back to stock windows 6.5 you need the original rom from the htc website. go in the UK version of the website, go to the bottom and select region as United Kingdom. Then click the help button. then select the hd2. go into new and downloads. download the rom upgrade for HD2. make sure you download the normal one, i mean NOT the one for o2 or T-Mobile or stuff like that. once you download the file, power down your fone. then turn it on with the volume down buttone and power button firmly pressed. dont let go until you see a red, green, blue and white screen. this is the bootloader. connect your hd2 to your computer via the usb cable. the "serial" word will change to "usb". all you need to do now is run the rom upgrade you downloaded earlier. run the file. folow the on-screen instructions and VOILA. u r back to stock hd2 with windows 6.5 Let me know how it goes and give me a thanks if u found this useful.
Click to expand...
Click to collapse
Hey there. That setup or instruction was my first try. I thought this would not be any problem, but no, it ****ed up the whole phone and software. It was unable to boot or anything after that.
Gladly I renamed ruu.signed to img.signed or something and put it to root on SDcard, and it worked. First time it ****ed up, all though second try it worked (thank god, lol). Now I sent it back for repair, and I think they changed motherboard. Will get it back within a week. But thanks for your help anyways!
OH! well it always runned just fine for me. Anyways atleast youll get your fone repaired.
adil1508 said:
OH! well it always runned just fine for me. Anyways atleast youll get your fone repaired.
Click to expand...
Click to collapse
Hey again!
Yeah, I think it runs just fine for someone, but sometimes it could get a bit messy.
At least I know I was unlucky when I tried. I sent the phone for repair, and they changed the motherboard!
It runs quite smoothly now. Stabile when it starts heating and everything.
Not sure if I will sell it and buy one X or just give it android and run with it for some months/year
Thanks for trying to help anyways.
Hey,
thanx again for the thought. if u have the bugdet definatly go for the one x. . but a word of advice, dont use custom roms on that fone until u absolutely get tired of the default rom. Just a thought to stay safe.. Hope u get it.

Categories

Resources