Database Info

Stuck in bootloader, please help!

Hello all,
Yesterday I tried to update my MDA Compact to qtek 1.06 and I saw to executables in the package:
getdevice.exe and enterbl.exe
I runned getdevice.exe for getting the device data for in the change.bat. That went oke, but out of curiosity I had to run the enterbl.exe, which made me go to the boot loader immediately. And now I'm stuck at the boot loader!
Whatever I do it won't boot to WME anymore! Soft reset, pressing the camera+power+reset, everytime it goes to the "Serial V1.00"screen.
When I remove and put back the backcover of the device (where the battery and sim are) it will go off and after a press on the power button it will boot to WME. But when I manually reset the device or when it automaticaaly reset itself after installing the ExROM tools, it goes back to the boot loader (Serial - V1.00) screen!
I even dumped the ROM with mmty to the SD card and flashed the device with that ROM again, but after it says Checksum is OK and I press reset it just goes straight to bootloader again.
I'm really out of clues of what to do. Can someone please help?
EDIT: When removing and putting back the backcover I can reset the device and it will boot back to WME so I can use it. But still when I softreset (with button or through software) it goes to boot loader. :-(
So using the backcover as a reset button is possible and does work, but it isn't very handy/usefull off course.
TIA
Regards,
Aurora13

Check the forum, the answer is there
Yes, you are still in bootloader mode and it's actually getting ready for you to flash.
Donno which part of it goes wrong, mine also have the same issue. What you need to do now is to restart your desktop pc / laptop (from the info I gathered from the forum). Then run that update thing again. This time, the same screen will appear saying it's trying to get the device data. Difference is, this time you no longer see the current version of ROM (as the Magician is in bootloader mode now). And you will see it show you the ROM that you going to upgrade to. Just follow the instruction, everything is straight forward. Hope this help.
cheers..

Thanks man!
You're the man cyberjaya!
It is working now, here is what I did (as told by cyberjaya):
- Rebooted my laptop
- Connected the MDA to the laptop
- Started the upgrade program of the qtek 1.06 ROM
- It didn't found my version, but it would let me update it to 1.06
- Flashing....(15 minutes is a LOOOONG time if you have to wait )
I did reset it a few times and it just boots normally!
Thank you ver much cyberjaya!
Regards,
Aurora13

No problemo
Am using laptop to flash also. Likely it's the USB hub thing (which listed in the "hardware devices" list). Read it somewhere, it's not recommended to flash using USB hub. Enjoy your new ROM!! .
cheers

I had a thought:
Isn't this the way to do a ROM upgrade without editing the ROM files?
Because it can't detect a different ROM and it will do the upgrade...
Or am I missing something?

Help with Error 260 on Wizard update

Hi, help please...
I have Wizard G3 with TNT 5 Touch Flow and tried to update radio T-mobile UK 2.19 Radio Only. update went OK but now on loading I see HTC boot screen then it moves to TNT 5.0 screen and then fades in two minutes and starts back with HTC boot screen. It then circulates like that for ever without passing to the Today screen. On connection with PC for new update with any rom it shows: Error (260) update error. What can be done?

denflorida said:
Hi, help please...
I have Wizard G3 with TNT 5 Touch Flow and tried to update radio T-mobile UK 2.19 Radio Only. update went OK but now on loading I see HTC boot screen then it moves to TNT 5.0 screen and then fades in two minutes and starts back with HTC boot screen. It then circulates like that for ever without passing to the Today screen. On connection with PC for new update with any rom it shows: Error (260) update error. What can be done?
Click to expand...
Click to collapse
it's a case of bad flash,did anything during flash happened like lose usb connectivity,pc crashed,battery discharged or something like unusual ?
Try to soft reset and see if it works,otherwise you'll have to reflash to official carrier's rom in boodloader mode,
1. Disconnect your phone from the usb cable,shut down any firewall,disable any Anti virus,Reboot your PC.
2. On your Desktop PC, open Microsoft ActiveSync, then go to File >Connection Settings >Remove the Selection from “Allow USB Connection with this desktop computer”
3. On your PC Open windows Task Manager...>Tab Processes...>wescomm.exe...>End process
4. Power off the phone completely (Not stand-by,shut off completely),or you may take the battery out for few seconds
5. Make sure your phone is not Connected to the PC via USB cable and remove the dummy Sdcard or mini-Sd card
6. Get your phone into Bootloader mode (Multicolor screen) by pressing camera button + Power on button
7. Reconnect your phone to the Desktop PC using the USB Cradle and the Charger MUST be Connected to the Cradle (Be sure that your battery is charged over 70%)
8. "USB"will appear on the bottom of the screen of the Bootloader (Multicolor screen)
9. Run the Upgrade again and it will work fine without any problems.
10.Never use Bluetooth sync for the Upgrade
While upgrading, the ActiveSync program will not go on, however the upgrade is running.Please be patient when you're flashing your device, even if 98%. It can wait a little bit, 5 ~ 7 minutes.
Don't cancell the flash or get the phone off the usb cable till it confirms "Congratulations" or stops with an Error!!!
Hope it'll work, Good luck

Hi, this is the first time i saw a Paki guy on this web. I know there is alot of talent in IT profession in Pakistan. Anyway its good to see u here and i got a relief that with the help of a senior member like you i can get my phone work again.
To cut the chase, I have X01HT by Softbank Japan. It is Herms200 by HTC Japanese WM5 ROM. I have installed Asukal's English MUI and it was working fine for me. Now i'm planning to visit Pakistan this month so i though to unlock the sim and i used Prof v3a to unlock. I've successfully unlocked the sim and i guess CID also. When i use some other carrier's sim, i can receive the calls but cant make the calls out coz Softbank rom has a security which comes at screen and ask for password and dont let me do anything on the PDA. After studying alot on this forum i figured that i need to change the rom to get rid of that password message. i used the Olipro's Hard SPL and got bootloader 2.10 Olipro. I checked the other necessary stuff and when satisfied i started rom update. I end up with the same message of Error 260. Now my phone has no OS and it starts at bootloader. i tried everything possible like i make sure to remove all firewalls on my PC, used all the versions of Activesync and everything possible that i could. I trust that there is nothing wrong with the ROM etc but it is with connection.
Now if i update to the original ROM, i'm afraid that it will also upgrade my Bootloader and could never be able to flash english rom. I'm really depressed for the last three days and loosing sleep as well. I trust that you or any other senior member can help me with this.
Thanks in advance and looking forward anxiously.

Farrukh, wrong forum.
You know you have a Hermes, then you should know to post your questions in Hermes related forum, not wizard.
denflorida:
Try to update other Radio-only ROMs in xda's FTP server.

Sorry Brother, i know i have herms but i couldn't find some related topic in herms and i figured that Activesync problem is the same in all devices.
Anyway, thanks for the prompt reply. I'll try to find some from Herms.
Thanks

8125 rom update
i have tried to do a rom update on my 8125 g4. i recently purchased it off ebay and i have two problems. the reason i want to update it is because when i try to enable the wifi my device freezes. the other problem is that i can not seem to get the phone into boot loader mode. i have tried :
-turning the phone off and holding the camera button as i turn it on.
-holding the camera button and pluging it in to a usb port.
- using wizard service tool to enter boot loader mode.
after each of these different attempts i had to either remove the battery for 3 secs or hold the reset button for a few seconds before i can turn it back on. the phone still turns and just i can not use the wifi

Yes!!! Thank you! your instructions worked for me and got me past the Error [260] with my 8125 .

zabardast_1 said:
it's a case of bad flash,did anything during flash happened like lose usb connectivity,pc crashed,battery discharged or something like unusual ?
Try to soft reset and see if it works,otherwise you'll have to reflash to official carrier's rom in boodloader mode,
Click to expand...
Click to collapse
Thanks! Worked for Topaz and latest radio update.

Radio Help pls!

OK
I've always had troubles flashing radios for some reason, I've managed to just not do it but now with Duttys 6.1 out I really need some help
- I've flashed Duttys latest successfully
- I've flashed HardSPL
- But whenever I flash the radio (1.64.08.21) I get a connection error at 99%!!
Now I can still get into the phone using mtty and the boot command.
Am I doing something stupid -- Any help gratefully received!
Alex
ps - I have a UK o2 XDA Stellar

I'm a newbie been here with a AT&T Tilt less than a week and I promise I'm reading, but I'm having the exact same problem. Flashed Duttys dual V4 as my first try last Tuesday without a problem and of course be a crazy new guy I wanted his newest work. So I flashed Duttys 6.1 today and I guess I just can't figure out how to flash radios, because I've tried 2 now and both error out at 99% and I too have to use mtty to get back into the phone. I'll keep reading, but if someone could tell us new guys what the heck we are doing wrong that would be great.
PS I'm glad to be here and this looks like a lot on fun thanks for having me and look forward to helping out someday.
JMan

Hey Alex! I figured it out Brother! Do this and you should be able to upgrade your radio. I was using JumpSPL1.56-KAIS run from my device and I was running into the same problem everytime I tried to upgrade my radio. Would get to 99% and then would error out. So I followed these steps taken from a number of different post and put together until it worked!
1) Make sure you have JumpSPL1.56-KAIS somewhere on your device the file for me is in "my docs" on my Tilt.
2) Run kaiser-HardSPL from your PC with your device hooked up via usb with the green act sync icon. Once you get to the white screen of death on you device, stop unplug you device and soft boot it via your stylus and the reset button. Leave your pc alone right where it stopped in the kaiser-hardspl screen. "should be to the point where it says unplug and replug in your usb you should have the tri color screen press enter to proceed"
3) Now set your connection settings in active sync to not allow usb connections.
4) Now plug you device by in via usb and run Jumpspl1.56-kais on your device. When it has the tri color screen and says usb, unplug usb and plug back in.
5) Now back in the kaiser-hardspl window, continue on with the on screen directions. This should now install hardspl just like the rom or roms that you might have already installed and will say finished.
6) The device should reboot.
7) close the kaiser-hardspl window and let you device fully reboot.
8) Once it is fully rebooted follow these directions: Perform a soft reset, when the screen goes blank hold the camera button until a multi colored screen comes up
9)Now run your radio update and it should go through without erroring out at 99%. It will stay at 99% for a bit then jump to 100% success!
My Tilt is working great now with sound and everything. Have not tested anything else yet, came right here and started to let you know what I did to get radio installed.
So now I'm running Duttys WM6.1 newest release with radio 1.64.06.
Call me crazy and sure I know I might have taken more steps than I needed to, but I got it working.
Hope this helps you.
Take care,
JMan

First, are you using a 6.0 rom or a 6.1 rom? If you are using a 6.0 rom you cannot flash any of the 6.1 radios and vice versa. Also, if you have hardspl installed, why would you need to use jumpspl. I have never used jumpspl and I promise I have flashed 50+ times counting, roms, radios and splash screens.

I believe that was my problem, I was never able to get Hard-spl installed and I was using jumpspl to install the 2 roms that I have installed since I got my tilt a week ago. The method I used above allowed me to get hard-spl installed and then I was able to install the radio rom. I am using Duttys WM6.1 rom.

JMan I want your babies!!!
Ok I had actually done everything upto the final step (holding the camera button after a soft reset) but that made it possible to flash the radio just as you described.
So many thanks for sharing your solution!!
Alex

jmandss said:
Hey Alex! I figured it out Brother! Do this and you should be able to upgrade your radio. I was using JumpSPL1.56-KAIS run from my device and I was running into the same problem everytime I tried to upgrade my radio. Would get to 99% and then would error out. So I followed these steps taken from a number of different post and put together until it worked!
1) Make sure you have JumpSPL1.56-KAIS somewhere on your device the file for me is in "my docs" on my Tilt.
2) Run kaiser-HardSPL from your PC with your device hooked up via usb with the green act sync icon. Once you get to the white screen of death on you device, stop unplug you device and soft boot it via your stylus and the reset button. Leave your pc alone right where it stopped in the kaiser-hardspl screen. "should be to the point where it says unplug and replug in your usb you should have the tri color screen press enter to proceed"
3) Now set your connection settings in active sync to not allow usb connections.
4) Now plug you device by in via usb and run Jumpspl1.56-kais on your device. When it has the tri color screen and says usb, unplug usb and plug back in.
5) Now back in the kaiser-hardspl window, continue on with the on screen directions. This should now install hardspl just like the rom or roms that you might have already installed and will say finished.
6) The device should reboot.
7) close the kaiser-hardspl window and let you device fully reboot.
8) Once it is fully rebooted follow these directions: Perform a soft reset, when the screen goes blank hold the camera button until a multi colored screen comes up
9)Now run your radio update and it should go through without erroring out at 99%. It will stay at 99% for a bit then jump to 100% success!
My Tilt is working great now with sound and everything. Have not tested anything else yet, came right here and started to let you know what I did to get radio installed.
So now I'm running Duttys WM6.1 newest release with radio 1.64.06.
Call me crazy and sure I know I might have taken more steps than I needed to, but I got it working.
Hope this helps you.
Take care,
JMan
Click to expand...
Click to collapse
You are the STAR! Trillions of thanks. Solve my problem!!!

I love it when when the new guy can help out! Glad it worked guys, and thanks to all the old pros around here for allowing us to read so we can try and help ourselves out.
Take care,
JMan

I think I have fallen in love with this thread. This is truly nice to see guys. Keep up the great work.

i've the same problem, but when reboot Appear immediately hardspl, but i can't re-install nothing !

please help me
I don't want to miss mi tytn

pedro_se_rooot said:
i've the same problem, but when reboot Appear immediately hardspl, but i can't re-install nothing !
Click to expand...
Click to collapse
You need to use MTTY to get things going for you again, here is the thread to get mtty:
http://forum.xda-developers.com/showthread.php?t=371154&highlight=mtty
Search around and see if you can find the step by step to use it, might even be a how to text file in the zip file not sure. This should get you back on your way.
Can someone locate the step by step to use mtty for this man and put it in this post?
Have a good one,
JMan
Not a good day for the Wolfpack, Damn Tarheels!!

HTC Touch Cruise/XDA Orbit2 - Hardreset/Rom Flash.....

Hi everybody,
i got a XDA Orbit 2 and today i tried to install SPB Phone Suite.
During install it asked for a Softreset, which i did...
After that i refused to boot and keeps hanging at the o2 Bootscreen.
It totally freezes, regardless if i pull any cable, remove the sd-card etc..
So i thought i'd a hardreset once again, but that one didnt work at all.
The Restore lasts maybe 10 secs (with and without sc-card), then asks for another boot and im again where i startet, the o2 bootscreen.
Any chance i get it working again?
Like somebody else recommended flashing it with either another rom or the original one, which i might d/l somewhere.
Then again, any Flash-HowTo starts with an ActiveSync Connection.
Since my Device wont boot at all, the ActiveSync Connection wont be established...
Any helpful Advise highly appreciated :-/
regards...

You should be able to manually put it into the boot loader. I'm not familiar with you phone so you will need to research that.
***Update**** Try this; "turn your phone on press and hold the two buttons on the upper left and right side from your naviwheel and press the resetbutton with your stylus"
http://forum.xda-developers.com/showthread.php?t=366303

hrm, pressing the upper left/right buttons and reseting it doesnt do anything.
regarding google im the first human ever trying to get the htc touch cruise into bootloader mode.
i keep researching, thx for ur effort tho

Manually getting into the boot loader will allow to establish a link to your PC in order to re-flash. Like I said, I'm not familiar with your phone....

yup, i noticed some more users here own an Orbit2.
So i hope somebody is able to enlighten me, before i brake my fingers while trying to press all buttons same time and then somehow hit the reset button, hehe.

ok, i managed to get into bootloader.
some more detailed research helped me there, actually inside this board :-/
now lets see if HardSPL makes me happy.
tx again for ur time

I have an Orbit 2,
To Hard reset and delete everything from your phone and then let the rom reload everything back to factory settings, do the following.
1. Remove SD card
2. Hold down the 'Windows Icon' Button and the 'OK' button at the same time and keep them held in.
3. While still holding in the above 2 buttons, use the stylus and press the reset button in and then release it but you must still keep the 'Windows' button and the 'OK' button still in until you are prompted with a menu.
4. Once the menu appears: press 'Send' button to reset and reload rom or any other button to cancel.
I have done this procedure a few times now and is quite safe, especially after loading a crap piece of software that totally knackers up my Orbit 2.
I hope this helps you out........
Good luck

Tried that before and it worked out before also.
This Time the complete recover-process lasts only 10 seconds and then the Boot doesnt work anymore either.
Dunno why the hardreset aint working anymore.
Regarding the Flashing:
I managed to get into Bootloader and see the following Information:
POLA200
SPL-1.25.0000
CPLD-2
Serial.
Then i plug in the USB-Cable and start the Update-Utility.
After following each step i get the following error:
Error 262: Update Error
Saying it has encountered communication Errors and asks me if i want to recover...
Im running VistaSP1, maybe thats a reason?

Try this for your Vista issue. It worked for me the first time. Although I don't know if SP1 has any effect.
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27 This was for Hermes also....

Updating the USB-Driver didnt help .
Using a XP VirtualPC didnt work out either, hehe.
Ill try tomorrow on a XP Machine, thanks for ur time once more.
Im not that desperate anymore, hehe.

Damn, now im using a Windows XP Machine (incl. all Updates) with ActiveSync 4.5, and still get the [262] Update Error.
Seems its seriously damaged :-(

One Question:
Did you installl phone-suite on a cooked rom, or on the original o2 rom?
i got the same freezing problem on my touch with a cooked rom. with the original rom i got no problems.
..
ploep said:
Hi everybody,
i got a XDA Orbit 2 and today i tried to install SPB Phone Suite.
During install it asked for a Softreset, which i did...
After that i refused to boot and keeps hanging at the o2 Bootscreen.
It totally freezes, regardless if i pull any cable, remove the sd-card etc..
So i thought i'd a hardreset once again, but that one didnt work at all.
The Restore lasts maybe 10 secs (with and without sc-card), then asks for another boot and im again where i startet, the o2 bootscreen.
Any chance i get it working again?
Like somebody else recommended flashing it with either another rom or the original one, which i might d/l somewhere.
Then again, any Flash-HowTo starts with an ActiveSync Connection.
Since my Device wont boot at all, the ActiveSync Connection wont be established...
Any helpful Advise highly appreciated :-/
regards...
Click to expand...
Click to collapse

how did you get it in to boodloader mode please

HTC Touch Cruise ROM on O2 Orbit 2
Hi,
Sorry for posting on this thread which might be the wrong place but hope someone ccan help.
Can I install an HTC Cruise ROM (WM 6.1 from HTC website) on my Orbit 2 ?

Flashed with new ROM by mistake

Hi,
and this is not the right way to start a thread in a new forum
a few days ago i bought a used TytnII with english ROM and last night I decided to organize my phone with tools and programms and then a bad thing happened....
I accidentally flashed a ROM in my phone, the file was marked HTC_TYTNII_UPDATES. The file was installed without giving any warning about ROM or non-compatibility issues. After rebooting i get a message that i used illegal ROM and a DeviceLocked message. and the phone reboots.
Any hope to bring it back to normal?
Stergios

Was it a cab file you installed?
Or did you run the file from your computer while your phone was connected through activesync?

StergiosKLM said:
I accidentally flashed a ROM in my phone, the file was marked HTC_TYTNII_UPDATES. The file was installed without giving any warning about ROM or non-compatibility issues. After rebooting i get a message that i used illegal ROM and a DeviceLocked message.
Click to expand...
Click to collapse
1. I don't think you flashed a rom.
2. There is no illegal rom.
3. Maybe it is a good idea to do a clean rom install on your Kaiser, especially since it is a SH device.
Either install cmonex' hard2 spl (3.29 for Kaiser or 3.56 for Tilt) and any rom of your choice, or flash the official rom for your device which will probably work with any spl you may have.

dani31 said:
1. I don't think you flashed a rom.
2. There is no illegal rom.
3. Maybe it is a good idea to do a clean rom install on your Kaiser, especially since it is a SH device.
Either install cmonex' hard2 spl (3.29 for Kaiser or 3.56 for Tilt) and any rom of your choice, or flash the official rom for your device which will probably work with any spl you may have.
Click to expand...
Click to collapse
loooool
why do you hate your kaiser!
anyways, there is no way a rom got installed without you knowing stergiosKLM...you would get many steps to click on if you were installing a rom.
format the device...install hard spl (whatever kind except 1.0) and flash your custom rom

StergiosKLM said:
Hi,
and this is not the right way to start a thread in a new forum
a few days ago i bought a used TytnII with english ROM and last night I decided to organize my phone with tools and programms and then a bad thing happened....
I accidentally flashed a ROM in my phone, the file was marked HTC_TYTNII_UPDATES. The file was installed without giving any warning about ROM or non-compatibility issues. After rebooting i get a message that i used illegal ROM and a DeviceLocked message. and the phone reboots.
Any hope to bring it back to normal?
Stergios
Click to expand...
Click to collapse
Your best bet is to do a hard reset. Go to start, settings, system, clear storage.
Write 1234 and press yes. It will start you from scratch. That should help.

anyway you could upload the file you installed so we could take a look at it

I am on trip right now but as soon as i get back I will send the file.
Thank you all

Problem update
my kaiser has eng version and the file i executed from my pc and installed in kaiser memory (not card), is a localization program from the Greek distributor of HTC that installs two programs, the first in the localization program and the second is a lock program.
After a hard reset (soft keys and reset key), i get the screen alignment, time and date etc, then i tap the screen to start using the device. and then ii installing the customization program.
the file is "HTC_TyTN_II-0.4.2.6GR-9.0.0.25.Installer.zip" and is a RUU_ExtendedPKG program....

Try hard reset by poking the soft reset hole and hold two softkey simultaniously...
look here for proper instruction to reset (kaiser wiki)...

Hard reset.
tugas2khas said:
Try hard reset by poking the soft reset hole and hold two softkey simultaniously...
look here for proper instruction to reset (kaiser wiki)...
Click to expand...
Click to collapse
This is the best idea I read in the thread. Just think about if this poor person throught that he/she had flashed a rom. Why even send them though the confusion of (hard spl, and flashing a custom rom)when he/she has no idea on what they are doing anyway. Just hard reset your device and this will fix your issue plain and simple.

i already tried that. plus, i do not know how, the device booted, i uninstalled both programs, then did a reset and still it keeps autoruning the file.
Should i record a video so you get an idea of what is happening? How can i upload the file so someone can check it out?
BTW i am a he. 8)

StergiosKLM said:
i already tried that. plus, i do not know how, the device booted, i uninstalled both programs, then did a reset and still it keeps autoruning the file.
Should i record a video so you get an idea of what is happening? How can i upload the file so someone can check it out?
BTW i am a he. 8)
Click to expand...
Click to collapse
You try to hard reset you phone?? I not talking about a soft reset. To perform a hard reset hold down to 2 line keys located between the send call and end call buttons and press and hold in the reset button with your stylist(this is located right next to the charge/usb port) til you see a white screen with blue writing and fellow the on screen instructions. I hope that this helps

i did that many times. all goes well up to the point where i get the message "setup is complete. tap the screen to begin using your device". I tap the screen and I get a windowed message "customization. It will automatically customize your device in 3 seconds" and the device shows a progress bar which says "Loading...." then "Loading AutoShortcut...." then "Installing...." after it finishes it reboots and it loads with the greek customization. as soon as it loads i get another windowed message which notes "DeviceLock. you have illegaly aquiered this ROM! This ROM is only for phones sold by ACE-Hellas and their distribution channel!" and after 3 seconds the device reboots and it keeps doing that.

The best solution is to go to HTC's website and download a new ROM/Radio directly from them. This will 100% fix your problem.
This should be what you need.... Pick one that matches your area/carrier

How to solve until you get home
StergiosKLM said:
i did that many times. all goes well up to the point where i get the message "setup is complete. tap the screen to begin using your device". I tap the screen and I get a windowed message "customization. It will automatically customize your device in 3 seconds" and the device shows a progress bar which says "Loading...." then "Loading AutoShortcut...." then "Installing...." after it finishes it reboots and it loads with the greek customization. as soon as it loads i get another windowed message which notes "DeviceLock. you have illegaly aquiered this ROM! This ROM is only for phones sold by ACE-Hellas and their distribution channel!" and after 3 seconds the device reboots and it keeps doing that.
Click to expand...
Click to collapse
Ok here's the deal. Do a hard reset and when it flashes to the customizing in 3 seconds button, do a soft reset by pushing in the reset button. That will stop customization from happening. Then you can use your phone, but will have to run connection manager to get your connection settings. This is the way to stop customization from running. It only runs one time after a hard reset.
When you get back off your trip, start with the thread mentioned above and work your way through the hardspl process and select a rom that you think has what you want then flash it.

parleyp said:
Ok here's the deal. Do a hard reset and when it flashes to the customizing in 3 seconds button, do a soft reset by pushing in the reset button. That will stop customization from happening. Then you can use your phone, but will have to run connection manager to get your connection settings. This is the way to stop customization from running. It only runs one time after a hard reset.
When you get back off your trip, start with the thread mentioned above and work your way through the hardspl process and select a rom that you think has what you want then flash it.
Click to expand...
Click to collapse
thank you, i appreciate that. One last question for the proper rom, i have to match rom version and radio version only, right?
have a happy new year. thank you all again

HardSPL must be matched too, but you probably won't have any problems regarding this if you install HardSPL 3.29.

victorpak said:
HardSPL must be matched too, but you probably won't have any problems regarding this if you install HardSPL 3.29.
Click to expand...
Click to collapse
spl3.28.0000, it shows in the 3color screen, i d/l this file Kaiser-HardSPL-3.28.zip. I suppose is right.

StergiosKLM said:
spl3.28.0000, it shows in the 3color screen, i d/l this file Kaiser-HardSPL-3.28.zip. I suppose is right.
Click to expand...
Click to collapse
That should work with most custom roms out there. If you have a freeze issue where the screen momentarily freezes, then you will need to flash a different hard spl. Most roms, tell you which hardspl and radio are compatible.