Database Info

[Q] How can I backup/restore my data in the ext2 partition?

Hi,
I am now using a 8GB SD card for my phone (around 6GB FAT32 and 1GB EXT2).
Now I am going to change into a new 16GB SD card (that I will create 1GB EXT2 partition soon)
Can anybody tell me how I can move the EXT2 partition from the old card to new new one using my pc?Thanks!

The only way I know of to do it with a pc would be to use a Linux distro, live or otherwise, then read the data from the ext partitions and copy it over manually if you can have both cards hooked in at the same time (one in a reader one in the phone).

Thanks but my Desktop is running Windows 7,
is there any alternative solutions?

[Q] Creating ext2 partition on micro sd card

Hi,
I have a 16GB Micro SD card that I want to create a 1GB exts partition on.
I have the free versions of Paragon and Acronis, but it would seem I need the full version to create a partition on an SD card?
I therefore got minitools partition manager and I was able to create a partition, but it is unallocated and it's status is NONE.
The FAT32 partition is Primary and the unallocated one is logical.
If I click on this partition almost everything is grayed out so I cannot format to ext2.
Please help.
I am running this on a cheap card reader from ebay on Windows XP.

PoshCat1 said:
Hi,
I have a 16GB Micro SD card that I want to create a 1GB exts partition on.
I have the free versions of Paragon and Acronis, but it would seem I need the full version to create a partition on an SD card?
I therefore got minitools partition manager and I was able to create a partition, but it is unallocated and it's status is NONE.
The FAT32 partition is Primary and the unallocated one is logical.
If I click on this partition almost everything is grayed out so I cannot format to ext2.
Please help.
I am running this on a cheap card reader from ebay on Windows XP.
Click to expand...
Click to collapse
Ext2 obviously
If it helps the card has a 4 on it, so does that mean it's class 4?

I think I'm a bit dumb !!!
I'd resized the partition only, so it was simply unallocated.
Are there any free partition software downloads that allow me to create a partition please?

It is MiniTool Partition Wizard Home Edition from partitionwizard.com

sanelh said:
It is MiniTool Partition Wizard Home Edition from partitionwizard.com
Click to expand...
Click to collapse
Cheers, I managed that and now I have another problem.
Thread to follow.

Hi, I`ve got the same problem. Have you found out how to do it?

flash608 said:
Hi, I`ve got the same problem. Have you found out how to do it?
Click to expand...
Click to collapse
I did, I think I used ROM Manager in the end.
It didn't work to begin with, I played with the Partition software above, then I went back to ROM Manager and it worked.

help
I got class 4 4gb memory card and has used minitool partition wizard to create 3.5gb fat32 partition and 500mb ext2 partition. but when i connected to my SE x10mini and it says 'damaged memory card'. but then i format the memory card via my phone and the ext2 partition has been erase. may i know any suggestion to create 2 partition and make the phone able to recognise the memory card??
one more question, may i know what is the next step to make ext2 partition to be apart of system's space??

I`ve managed to make two partitions using Gparted (win).

[Q] Link2SD and Partitions

I have an HTC Hero rooted with stock 2.1 firmware
I installed Link2SD and read through the development post on this forum but encountered and issue I cannot figure out how to resolve.
I reformatted my SD card with 2 primary partitions using MiniTool. I re-sized my standard partition to allow for an additional 400MB partition then formatted the unallocated memory to ext3 format.
So now I have 2 partitions that look like this in MiniTool (4GB SD card):
Partition FileSystem Size Status Type
-SDCard FAT32 3.30GB Active Primary
-AppsPartition ext3 400.06MB None Primary
(sorry cant get more spaces between words, dont use forums often)
I thought that was all I needed to do but when I put the SD Card into my Hero it just tells me I have a damaged SD Card. What do I do to fix this?

I just wanted to say I figured this out on my own. I don't know what the problem was but I reformatted the SD card from the Hero and it only formatted the SDCard partition and then I had to reformat the AppsPartition to FAT32 file system in order to be usable by link2sd and it worked.
No idea what caused the problem to begin with but got it resolved, that's all that matters right?

I had problems too until I formatted partition 1 as FAT (aka FAT16 - NOT FAT32), and the second as FAT32 or Ext2/3.
The key for me was the first partition being FAT.

[Q] SD Card Not Detected

Hi,
I have just bought a 32GB SD Card from Amazon. Komputerbay Class 10.
I have been running Sandvold's ICS ROM for the last month and all was fine, but I wanted a faster SD card.
I used Easeus Partition Manager using Windows XP and I created a 1GB ext2 partition after a FAT32 Partition.
However, I made it logical and wasn't able to change it to Primary, so I created another ext2 partition, this time Primary.
So, FAT32 partition of 28GB ish Primary, ext2 of 1GB Primary then ext3 of 1GB logical.
However, although my PC can see the FAT32 partition, my Desire cannot.
It can however see it in recovery which allowed me to flash the ROM etc.
Any ideas please?
Cheers

Perhaps you can format the card from the recovery, using 'Partition SD' option.

Josse125 said:
Perhaps you can format the card from the recovery, using 'Partition SD' option.
Click to expand...
Click to collapse
I read that it was not a safe thing to do to partition that way, but there shouldn't be a problem formatting that way?

But unfortunately not.
Still undetected.
I can put the old one in and it is found, so pretty sure it's not the phone.

As an update, I've just tried formatting to NTFS then back to FAT32 without joy.
Also, the ext2 does work as I had 988 MB of internal memory at one stage yesterday.

GPart Live worked a treat. All sorted.
The drivers on the laptop I used rendered the screen almost unreadable whilst using it, but at home it was fine.

I had a very similar problem: i create an ext3 partition and a fat32 one, but when i plugged the phone o the pc i cannot see any memory... After several tryouts, i made both the partition primary, BUT i place the fat32 at the beginning. And everything works fine xD

SD Card - partition problem / 1st partition FAT is not mounting, only 2nd ext2 works

Hi @all.
I wanna use Link2SD to increase the device storage.
I tried thousands of tutorials to partition the SD-card with all possibilities (as recommended 1st primary FAT32 and 2nd primary ext2/3/4)
Finally Link2SD works with the 2nd partition and is able to link the apps to this partition, BUT my phone does not find the first partition FAT32 anymore and is not able to mount it. Even in link2sd it only shows partition 2 available, and the first one not.
I have a 32GB card and tried FAT32 - 20GB & EXT2/3/4 - 10GB but also FAT32 - 28GB & EXT2/3/4 - 1GB - nothing worked.
only when there is just one partition with FAT32 and whole 32 GB at all than the phone mounts the sd-card
I tried also with a smaller 8 GB card, still the same.
It is nice that link2sd works now after rooting and also using the rootfix and Init.d Toggler (to not have the bootloop anymore), but the only problem is that I cannot use the bigger part of the sd-card for normal files.
Anyone got solving ideas for this problem? big thanks in advance

Solution
Some SD cards after creating two partitions, the first partition cannot be mounted.
The second partition, used in Link2SD, works fine.
So you'll need to format the first partition -and ONLY the first- to NTFS filesystem.
Also you will need "Paragon UFSD Root Mounter":
https://play.google.com/store/apps/details?id=com.paragon.mounter&hl=en
After you install the app, run it. it should mount the new NTFS partition and it will be totally usable in the system.
Click to expand...
Click to collapse
Thanks to user DJPRMF for this method