Hi!
I have a problem with my LG KS20 and Activesync on Win XP. When I plug the device, pops up a hardware wizard installer (I don't have any drivers), so when I cancel this there pops up a notification that can be problems with this hardware. How to connect with ActiveSync?
English only. Please translate and change your post.
ok this will happen the first time you try to sync on your computer. Dont cancel it, let it install properly.
I asume your service packs are upto date on your computer (must have at least sp1 i think but you should update to sp3 if you ask me) and ensure you have latest version of active sync (4.5xxxx).
If you have all this it should work
Related
Hi!
I want to sync my HTC Artemis with my Vista Laptop.
The problem is that I cannot open Windows Mobile Device Center on Windows Vista.
When I run it, theres only this Connection settings dialog appearing... everytime i open it! Normally there should pop up this bigger green nice designed window with many function (one of them the connection settings)
So I can nothing do!!
Though I can connect to my phone by USB and Bluetooth (I can browse the files on the device) I cannot set up WM Device Center to pair for a Sync connection.
It is also strange that all my contacts, etc. were gone when I tried this first.
I think this is because I had my device still paired but installed Vista new on my Laptop.
Can anybody help me?
you should search first grasshopper, or atleast check the second page of this forum.
http://forum.xda-developers.com/showthread.php?t=321275
i'm sorry that thread didnt help me too... that was the reason why i started this one! its a different problem now... i realized now that i wont get my contacts back so I'm collecting them wrom my freinds' phones.
the Sync problem still exists!
Have you tried downloading and installing WMDC 6.1?
http://www.microsoft.com/downloads/...F1-E46A-4A5F-A791-09F07AAA1914&displaylang=en (Vista x86)
http://www.microsoft.com/downloads/...56-7825-43B2-AC89-2030ED98ED95&displaylang=en (Vista x64)
you have to have outlook installed on you computer...vista does not come with it there for you can not sync your numbers...now outlook is expensive though...i also have a windows xp computer as well so i just keep syncing with that one...search for ns contacts as well...lets you back up all your #s to desktop then back to phone...google search it..
I have outlook installed
new installation of WMDC helped! thank you very much!!
hi i need help with syncing my wm6 smartphone to my windows me please help me if you can
sorry for that i have put it in the general but i was searshing in the in it and forgot that i wasnt in the tornado forum and put it and i dodnt no how to remove it sorry
You must use ActiveSync 4.5 or higher
i now but 4.5 dont work for windows me thats the problem can i do it another way or make it work
Activesync problem
bestever said:
i now but 4.5 dont work for windows me thats the problem can i do it another way or make it work
Click to expand...
Click to collapse
- plug the mobile.
- Go to Device manager
- Delete "Microsoft Windows Mobile Remote adapter"
- Unplug and replug your mobile
It will works....
but wich proogram will i use
bestever said:
but wich proogram will i use
Click to expand...
Click to collapse
in windows XP : Activesync 4.5
In windows Vista : Windows Mobile Device Center
but i have to computers one is xp no problem with conection and the other is windows me and thats the problem i tested thats you told me but didnt work
activesync
try Active sync 4.2
Other solution :
- install the original activesync (for WM2003 or WM5)
- Modify connection settings in WM6 and disable "Advanced network functionality"
- reconnect your smartphone on windows ME
i did everything and used usb switch and the active sync is connecting but i think its the phone thats stopping it becose it come an erorr thats says need activesync 4.5 or higher
maybe i must change something in the registryedit
I recently flashed my ROM from WM5 to WM 6. Thank you XDA. The problem I am having is now my Vista Computer won't connect with my MDA. Before the Flash it snyc fine. I uninstalled WMDC and reinstalled it and nothing. WMDC is aweful, Active Sync is great. Help maybe it is some kind of trick to get Vista to recognize it again with the new flashed WM6.
make sure you are using Active Sync. ver 4.5.....?
with some roms you have to uncheck the box "USB-PC" Found in settings/system/or sometimes found in connections,"USB-PC" and uncheck Enable advanced Network functionality. Then try and Sync
I can't use Active Sync with Win Vista. Any other suggestions..?
Then restore Vista to when it was working.
I'm also having trouble with Vista Ultimate (x64 and x32) and my Wizard (Octavoi's ROM)
It sees my device for a few seconds and then it closes.. The WMDC doesn't see my device at all...
The Event Viewer shows the following:
Windows Mobile-based USB device is plugged in but is unable to make a network connection to the desktop.
Click to expand...
Click to collapse
Windows Mobile-based device failed to connect due to communication (0x80072745) failure (see data for failure code).
Click to expand...
Click to collapse
Does anybody know how to solve this?
I've tried to uncheck the 'Advanced Network Functionality', but that also doesn't seem to work.....
Firewall could be the culprit.
Check your settings in your firewall. If you have Windows OneCare that would also interupt your connection with WMDC. But with any firewall program make sure that it allows or is in the trusted mode for any Windows Mobile Device.
I have Windows Live One Care but I don't think that's the problem.
I turned it off and tried to connect... without succes
But I'll give it a try again this afternoon.
i'm the other way, i went from vista to xp at work because of stupid autocad 2008 problems (don't get me started) and i prefer wmdc over activesync.. i have ver 4.5 and i have issues like it sometimes will randomly disconnect or won't complete a sync. other times i have no issue though. I never had a problem on vista with wmdc.
when i first hooked up my pda in vista it would load the driver in vista but, wouldn't connect, turned out it was loading an older driver and i manually updated to the newest one and just like that it was connecting, later i downgraded the driver to be able to update the rom and it was still working.
pyrorob said:
when i first hooked up my pda in vista it would load the driver in vista but, wouldn't connect, turned out it was loading an older driver and i manually updated to the newest one and just like that it was connecting, later i downgraded the driver to be able to update the rom and it was still working.
Click to expand...
Click to collapse
Where did you get the newer drivers from?
Try this :
Go to device manager in Vista
While connecting your wizard the device manager should refresh and add a 'MS Windows Mobile Remote Adapter'
Now right-click that adapter and choose 'uninstall'.
Vista will add the device again and soon after WMDC should connect.
At least it worked for me...
sysarck
sysarck said:
Go to device manager in Vista
While connecting your wizard the device manager should refresh and add a 'MS Windows Mobile Remote Adapter'
Now right-click that adapter and choose 'uninstall'.
Vista will add the device again and soon after WMDC should connect.
At least it worked for me...
sysarck
Click to expand...
Click to collapse
I tried the same, but without luck.
Ok, I've flashed my phone and now it seems to work with Octaivoi 6.3!!
Hello,
After I created a new install of Windows 7, I'm not able to sync my Touch Pro.
If I boot on my previous Windows 7 installation (I kept it on the same computer), sync is OK.
I uninstalled (and reinstalled) many times WMDC, "PocketPC USB sync" and "Windows Mobile Remote Adapter" drivers.
There is some trouble : obviously WMDC doesn't recognize my device.
Both "USB to PC" modes are not able to start WMDC.
Any help?
If you have the Pro version, you should be able to run a virtualized instance of XP, and therefore set it up under as ActiveSync in XP. That is with the official release from what we trained on, 22nd is that date... This allows ANY program to run that was supported by XP 100%
I'm using Windows 7 on my laptop and PC, sync with TP no problem at all. I've done installation on few computers too and they are all good. Things that you might check:
- Check your USB Sync cables and/or your USB port, just to make sure
- Open Windows Mobile Device Center and delete all partnership, then reconnect back
- If possible, try to change your TP ID, so that Windows recognize different device.
Hope it helps.
To supratt93 :
Good idea I'm going to try this
To u2pop :
- I've 2 Win7 installed with a boot selector. Sync works with the forst one and not with the other one, so the cables and USB ports are OK.
- I have never been able to create a partnership. Win7 installed the drivers and WMDC never started. Something goes wrong with the installation of the drivers
- Sometimes I receive a message telling me about a problem with installed drivers (nothing about which device is concerned)
I solved my problem today:
After a reinstallation of the last chipset drivers of my Asus P5k motherboard and a reboot, WMDC started and allowed me to sync my Touch Pro.
I hope that will help someone!
I know that this is solved, however I had the same problem.
I reinstalled WMDC, etc.
In the end a simple swap of the usb port that the USB cable was plugged into and it solved the problem.
Hi, I bought a HD2 through Ebay and didn't get the getting started CD. I installed activesync 4.5 on my XP and WMDC 6.1.6965 on my vista. Both computer do not recognize htc device thru USB saying unknown device for a few minutes then stops, tab says "one of the usb devies attached to comp has malfunctioned (USB not recognized)
Have tried :
1) USB to PC - unclicking faster data sync, hard resets, reinstalling WMDC and active sync
2) changing power options to usb to disable selective suspend
3) close zone alarm and window firewalls
4) taken out SD card
5) tried WMDC 6.0, active sync 4.2
5) followed this website hxxp:/pocketpcfaq.com/faqs/wmdc/services.htm and trialled the batch.
Batch said UPnP service name invalid so I installed uPnP tester from:
hxxp://download.cnet.com/Universal-Plug-and-Play-Tester/3000-2651_4-10504740.html
Batch file continues to say Windows mobile 2003-based device connectivity and windows mobile-based device connectivity as invalid, but i cant find a way to install/update these from microsoft website or through the web.
Note: when i install WMDC driver software installation successfully, under unidentified device.
Version T-mobile: OS 5.2.21892 (21892.5.0.89) ROm 2.13.531.1. (im in Australia if that makes any difference)
I want to be able to sync to a computer either xp or vista. Could it be my device or is my setup wrong? Thanks for help in advance
I'm having the exact same problem except with my Fuze running Tael Rom.
Help, anyone?