Database Info

Can't Uninstall

When I try to uninstall any software from my jamin (prophet) i get the following message: "this program was not completely removed. do u want to remove it from the list of installed programs."
And in fact the program is not removed at all and I have to delete the files manually, then go to the registry etc...
If i try to uninstall from activesync on the pc, the uninstall windows will simply shut, and uninstall would not proceed.
On the "first days" of my jamin this odd behavior never happened.
Any clue about this?
Thanks all

Have you moved things around? Manually changed program directories?
Usually there are 2 possible causes for the problem:
1) The program is running so the files are in use and cannot be deleted.
2) The files are located in a different directory then the one they were installed to, so uninstall can't find them.
You could try using MemMaid to get read of unused files and registry settings.

levenum said:
Have you moved things around? Manually changed program directories?
Usually there are 2 possible causes for the problem:
1) The program is running so the files are in use and cannot be deleted.
2) The files are located in a different directory then the one they were installed to, so uninstall can't find them.
You could try using MemMaid to get read of unused files and registry settings.
Click to expand...
Click to collapse
Thanks for ur reply. But it is not due to either of the 2 causes u mention...

Same happening to me and it's driving me crazy!
please someone help!

You're problems may not be from device side but from software side...
I also had this problem as a developer when i used releases for 2003 devices on 2005 devices (they work well no doubt about it but the message error ocures constantly). The main problem comes with softwares that have a customised setup.
Cheers,
Raul

xusso said:
Same happening to me and it's driving me crazy!
please someone help!
Click to expand...
Click to collapse
Whenever I have had this a soft reset normally solves it.
In other words when you see the error message "not successfully uninstalled do you want to remove the files in the installed list" answer NO then soft reset and try again.
BTW if the program has a today plugin - this should be unchecked before doing the soft reset.
Matt

his has hapened to me also with my Qtek S200 WWE.
But if I soft reset my device and once it boot's up (after quite some time Evil or Very Mad ) I unistall whatever I need to uninstall, then it works just fine.
I have also noticed that by using "Freeup Ram" (part of SKTools) then I'm able to unistall without problems.
Best regards,
Rayan

Activesync error message

Since upgrading to AS 4.5, I can no longer install applications on my htc Touch.
The error message reads:
"Application Manager cannot intall this application on your mobile device due to an error in the setup file. Reinstall and try again"
Happens with all .exe files and I have re-installed AS4.5 several times and tried "Repair".
Don't think it's an issue with programs that weren't designed for WM6 because I can't install the Sprite and spbGPRS programs from the htcTouch CD
I'm running XP Home SP2 and log on with Administrator privilages
The files install OK on my work PC which runs XP2 Prof SP2 with no Administrator privilages.
Any ideas anybody?

Anybody else...
...having this problem?

http://support.microsoft.com/kb/256020
http://www.google.com/search?source...an+error+in+the+setup+file&btnG=Google+Search
maybe

Been there, done that
no answers anywhere I can see.
The Microsoft site only applies to specific programs, like the Media Player one you pointed to or Powerpoint.
Only thing I can find is possibly the .ini file doesn't have the correct version notation for instance it states version 1 instead of version 1.0
That still doesn't explain why they all install on the PC at work though.
Both PCs running AS4.5, both running Windows XP

i dont really thing activesycn is good at cleaning up after itself when reinstalled and or uninstalled
i've seen lots of files in it's dir
and lots of registrys it leave behind
a good cause would go and hunt them down and make sure
that a reinstall is really a reinstall

AvantGo problem...

Hi! I used to read a channel called ARUP Consult from Avantgo without any problem without going into Avantgo and clicking on Arup, I mean, it had its own icon in Programs root. As soon as I installed the latest rom on my treo 750, now it says 2 different messages:
1.- The file "Avantgo" cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.
2.- ARUP Consult requires M-Businnes CLient to be installed. Please install M-Bussiness Client.
I have reinstalled Avantgo without any improvement, any hel would be appreciated.
Thanks in advance

[Q] .NET CF Install issues

I've got a Vogue with Sprint running the official 6.1 OS.
Lately I've been having issues running certain apps. The new Facebook app and ComicReader 1.5.2 are the latest examples. Launching the application gets me this error message:
The application failed to load required components. If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation of the .NET Compact Framework is recommended. Support info: -2147479552 (80001000).
I have uninstalled .NET CF 3.5 through Remove Programs, but when I try to re-install, the device gives me the message:
The .NET Compact Framework version you are attempting to install already exists in ROM.
Then the installer exits.
Any thoughts on how I can get this fixed?

When you install the .net compact framework it sets a registry setting saying it is enabled and i think this is that it looks for when trying to install.
Try deleting this from the registry:
"\local machine\software\microsoft\netcompactframework"
after deleting, reinstall

joel2009 said:
When you install the .net compact framework it sets a registry setting saying it is enabled and i think this is that it looks for when trying to install.
Try deleting this from the registry:
"\local machine\software\microsoft\netcompactframework"
Click to expand...
Click to collapse
That did the trick! Thanks!
AJ

ajbopp said:
That did the trick! Thanks!
AJ
Click to expand...
Click to collapse
Well, it sort of did the trick. It worked for the two apps mentioned (facebook and comicreader) but now fails with the same error message when I try to launch FSD dialer which I just downloaded and re-installed.
sigh
~~Update: I've also discovered that I get 4 of these errors pop up on a soft reset now. I have no idea what's throwing them because so far I haven't noticed any startup items that do not work. It could be a latency issue I suppose, but I did install .NET on the device, not a storage card.

Well this is getting serious. I've uninstalled and reinstalled .NET but it's not helping. Although some programs that didn't work now do, several others like GWatch, GAlarm, DiamondTV, PianoNM, and a notepad application now do not work, and I get the same error. I find two of these missing component errors on the phone every morning, and four of them on every soft reset.
Please someone tell me I'm not looking at a hard reset...
AJ

Try this:
There is a Compact Framework 3.5 powertoy named '.Net Configuration' (see cab below). The application provides control over the .net CF on your device. Here's what you do:
- Install the CAB below (to internal memory!)
- Run '.Net Configuration' from your Start Menu
- Navigate to the 'Device Policy' tab and select version 3.5
- Select 'Apply' then 'OK'
This has worked for other issues like yours.

Yay! All better now. Thanks!

If you have problems after that config it may be your rom. Some roms have registry settings built into them and restorethem on a softreset.... just a heads up

i was having the same problem with proven 1.12 rom for touch pro and following your above advised solved the problem.
Thanks Joel once again.

Run \Windows\cgacutil.exe on your device and it will pop up a window that lists the version(s) of the .NET CF installed on your device. I assume it stands for CompactGlobalAssemblyCacheUtility, and probably reads the stuff straight out of the registry. Easier than hacking about in the there anyway.

cannot install .netconfig
stephj said:
Run \Windows\cgacutil.exe on your device and it will pop up a window that lists the version(s) of the .NET CF installed on your device. I assume it stands for CompactGlobalAssemblyCacheUtility, and probably reads the stuff straight out of the registry. Easier than hacking about in the there anyway.
Click to expand...
Click to collapse
dear forum - unfortunately i cannot install the .netconfig.cab - device keeps saying "installation failed" tried to install it on both, device and than sd-card" - so cant fix the problem?
any advice?

.net - problem
dear forum - any ideas? - need help, urgent, please

clrcad.exe not working

clrcad.exe not working when I try to use it before starting android 2.2 on my htc hd2. need help thanks

I had the same problem as well, hoping for a solution

+1
Same here, I run it before launching linux but still have teh same audio problem.

bump.
Anybody know what problem is?

bumpin...
same problem here.

hm. No help huh...
I've got the same problem.

ditto... i think we need some support over here lol

I can't run it any more - it says "CLRCAD cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found... blah blah" I've tried deleting it and copying over a new copy but it still doesn't work - it worked the first couple of times though?

I have the same problem. And even more: after trying run clrcad.exe now I can't run any exe from sd card!

Solution to CLRCAD.exe will not execute.
I have an HTC HD2. I have been playing around with different android builds for the last week. About two days ago CLRCAD.exe stopped working for me. I ignored it and continued to load. It was only when I got an extemely garbbled called that I realized how important it was to have CLRCAD.exe working. I tried reformatting my SD Card with not luck in getting it to work. Tried searching the forum and gave up and googled the problem which in turn lead me to this post and it seems a lot of people have this issue. I don't know the cause yet....but in a flash I thought about doing a factory restore for the windows 6.5. Eureaka!!!!! that solved my problem !!!!!

I done the same thing thinking a factory restore would solve the problem - but no..., it's not recognised on me pc nor my device - keep gettin the error "This is not a windows 32bit application."

same problem here.
Winmob does simply nothing if I click on clrcad.exe. No question if I want to run it or something.
Anybody got any idea what the problem could be?
Hellbanan

edgasket said:
I can't run it any more - it says "CLRCAD cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found... blah blah" I've tried deleting it and copying over a new copy but it still doesn't work - it worked the first couple of times though?
Click to expand...
Click to collapse
Did you resolve this issue? I have the same problem and have searched for the resolution but have not found anything. Help!

Hard Reset worked for me - but still now I have to deal with black-outs (no wake-up screen up)...

Raman HTC hd2
Hi have installed successfully android on htc hd2,but having problem with calls.
i will not able to hear voice of others.
have run the clrad.exe even after, any suggestions ?

This is quite strange, because I have had Froyostone Sense V3.1 running on my stock HD2 for nearly a month without any issues. Then out of the blue, the screen went blank yesterday, so I rebooted, and then tried to run CLRCAD from the Android folder.
I then got "CLRCAD cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found" message. So I downloaded the latest Froyosense, and copied over the system.ext2 and the zImage files, and a clean CLRCAD and HARET. But still I get the same thing. And I get that message on HARET as well.
Does anyone know the cause and best resolution, preferably without the factory reset?

Same issue here too. Interestingly, when I run CLRCAD, i get the same interference on the WMOS as well as ANDROID.

same here.....the exe simply does nothing when i click it.
and i cannot load android at all...............after loading the kernel for a while , the phone rebooted back to WM!!!

I am able to run CLRAD.exe and I know that is normal that nothing happens but I have problem that after loading ANDROID there is no any sound. I also tried to reset factory settings... So is there any solution to this or not?
SOLVED by Kwbr_HD2 ROM, but again stopped working after few reboots!

The first time i excecuted clrcad.exe a message appeared "do you really.. bla bla bla" (u know what i mean) which ich answered with YES. Then some days later i did a reboot and since this time the message didn't appear. But Android works also great without the message. I tryed to figure out if there is running clrcad.exe in wm but i cant see it. So, i have no clue if clrcad.exe is running, but Android works. The Sound is good!