Hi guys
i got a big problem i was trying to update my rom using onyx_ult_4.1.3,so i connected my htc to a usb cable then did all the steps but when the program started to transfer suddenly my htc disconnets from usb and stop i did softreset and now whe a turn on appears an colored
screenwith this msg:IPl 1.14.0002 RUU
SPL 1.14.000
see the attachments
what should I do to return to work again its urgent help pls
sorry for my English
go to the Touch section and look for a thread concerning how to rescue the phone.
maybe you can flash a new rom (you're already in bootloader menu) .. or restore something.
there is a LOT of information in the forum.
Related
Hello,
can everbody help me my Pda Compact 2 fails after softupdate with
wrong Update (qtec)
Now after start the device, the display is flashing short and than nothing !!
with plug in AC-Power I come in Bootloadermode(without usb or seriell shown) but with usb cable nothing.
The bootmenu does not work !!! What can i do ??? (before flashing bootmenu ok)
are there tools for flashing rom directly or a other way to come in bootmenu ???
without bootmenu i can not boot from SD or ???
please help !!
sorry my bad english !!!
thanks !!
I Have the same problem
My sad story is…..
I purchased MDA Compact II a month ago. I changed its ROM with JAMin’s ROM (after unlocking with LOKIWIZ). The device was OK but camera was not working, so I updated it again with K JAM’s ROM process started 10% to100% as usual & massage appeared congratulation your device is updated successfully. The process was also running on my device as usual. But after that my device (I mean MDA Compact II) refused to start normally it just blinks LED & so LCD. (It is dead now) The PC doesn’t detect it no boot loader is available to update it with its original ROM that I got now. So if you find any thing plz help me & if I get any thing I promise I'll inform you my email adres is [email protected] plz mail me to have your email adress to comunicate
bye
azhar
Re: I Have the same problem
azhar63 said:
I changed its ROM with JAMin’s ROM
Click to expand...
Click to collapse
Why? :?
jun36 said:
Hello,
can everbody help me my Pda Compact 2 fails after softupdate with
wrong Update (qtec)
Now after start the device, the display is flashing short and than nothing !!
with plug in AC-Power I come in Bootloadermode(without usb or seriell shown) but with usb cable nothing.
The bootmenu does not work !!! What can i do ??? (before flashing bootmenu ok)
are there tools for flashing rom directly or a other way to come in bootmenu ???
without bootmenu i can not boot from SD or ???
please help !!
sorry my bad english !!!
thanks !!
Click to expand...
Click to collapse
if you say you can get into the bootloader with the AC cable then you should beable to download a SD card image on to the phone.
When plugged in it is not bootloader. Same thing happened to me and i tried the sd image rom. The screen looks like the bootloader but it is not. There are 3 colors and no mention of serial 1.x or whatever it is. I am going to send my unit in 4 repair. Look in the prophet forums there are 2 threads. One is titled upgraded prophet with wizard rom and the other thread is Can anyone help fix my brick. If anyone knows a fix it would be great but I think it has to be repaired by disributor.
Try this
Plz try this link u may fine something http://forum.xda-developers.com/viewtopic.php?t=37386&highlight=awizard
help... i downloaded smart1's (normal, not clean) update, and launched UPGRADE_ROM.DAT from PC... it said initializing and everything... and then it reached to "copying something.dll' ... i waited 10 minutes or so then i got something like:
"error cant copy ....... because connection closed from remote... something like that."
i did NOT touch the imate during the process
and now when i turn on my imate i get the HTC with white background for a second but then it freezes on the blue "i-mate" screen... displaying:
IPL 2.13.0001
SPL 2.13.0001
GSM 02.20.21
OS 10.1.0.811
when i connect it to pc, windows does recognise and install my device but ActiveSync doesnt connect.
i tried removing the battery then putting it back in then pressing and holding the conn. button along with the power button and i DO get to the bootloader screen (with three colors) and then when i plug in the usb i get a small 'usb' word at the bottom of the screen, but still, ActiveSync doesnt connect... i tried installing the update again... but the program doesnt find my device
how can i make it work again ??? plz help me
thx in advance
Now you need to find a rom that will install from bootloader mode and not an update........
I don't think you phone is dead
JD
johnnyduk said:
Now you need to find a rom that will install from bootloader mode and not an update........
I don't think you phone is dead
JD
Click to expand...
Click to collapse
i read in another topic what u said above... thx for ur reply...
btw, i'm currently downloading a 56 mb file called:
JAMin_WWE_2130923_21309112_020720_ship.zip
it can be downloaded from:
ftp://ftp.clubimate.com/JAMin_WWE_2130923_21309112_020720_ship.zip
or (better direct link)
http://www.clubimate.com/support/JAMMIN/ROM/JAMin_WWE_2130923_21309112_020720_ship.zip
i suppose this is the file i shoudl install right now using bootleader mode ? right ?
my previous rom version was 2.13.9.23 (same as name of file)
so is this the file i shud be downloading right now ?
thx a lot in advance
Just BEWARE that the rom you download is for your phone, it will be for a G3 or a G4, if you get it wrong, your phone is DEAD.
Please read the wiki and stickies....................................
JD
please. my phone doesnt move. it stuck on login screen.:
any way to restore it? i tried to hard reset, soft reset...nothing..
i tried to install smart 1 and after this happened
Problem solved
Same problem for me, but I solved today:
I connected the phone to pc in bootloader mode, the pc see the phone and says ppc usb sync, but the activesync not started.
I tried to install a qtek official rom by dangaard (you can find it here: http://www.megaupload.com/it/?d=4ELWL078 ) and I solded the problem !
Thanks god!!!!
Please i have the same issue with my O2 XDA Neo - G4, i checked the official site but i don't understand german. Pls someone paste me a link to official Rom.
Twinsis said:
Please i have the same issue with my O2 XDA Neo - G4, i checked the official site but i don't understand german. Pls someone paste me a link to official Rom.
Click to expand...
Click to collapse
ftp://ftp.clubimate.com/JAMin_WWE_213923_2139123_022021_ship.zip
here is the official link for O2 xda or Imate Jamin
Same problem!
I had same problem but in my case with downgrade from WM6 to ASERG rom, i have downloaded RUU_Prophet_220734_2207114_024721_NVID.exe and that fixed my problem.
Guys,
I wonder if you can help. I have trawled this and many other forums and found many people that are having problems with their HTC Prophet or variations of the same device.
I have the Orange SPV M600, it was in my pocket and when I took it out to turn it on, it was displaying the bootloader screen after seemingly soft resetting itself. It is displaying the tri-colour bootloader with the following IPL/SPL
- IPL 2.10.0001 - SPL 2.10.0001
I have tried the following things that I have found in the forums:
1. Taking the battery out for 10 minutes ~ Still the same.
2. Hard Reset ~ I get the "Press SEND button to factory restore" message
but nothing happens when I push the call button.
3. Reflashing the ROM ~ I am unable to do this. I only have Vista and
WMDC does not see the phone in bootloader mode.
Is the phone dead? If so how could this have happened?
If anyone could help I would be eternally greatful. Oh and to add another complication the phone is still CID Locked
Thanks in advance
Barry
well if you where is south africa i would of helped you im sure if you have it runing on xp it will work my jamin did the same and all i did was push the camera button and reseted it got into tri colour mode and reflashed it
sorry that i could not help you but like i said if you in SA we could of tried it on my mashine
Any progress ?
did you ever get this sorted out ? Surely all you're gonna need is a PC with XP and active sync....
If I was closer you could have sent the phone to me and I would have had a go at reflashing the rom, but I'm at the other end of the country....
Hello guy here is a solution to flash under vista i have too a orange m600 and it works fine
http://www.modaco.com/RUU-Vista-done-u-t252977.html
help stuck on the bootlader screen?
guyz i have a jamin.. my cousin was flashin it and flashed the wrong software.. if i reset the phone it shows the boat loader screen!! and i cnat do anythin..caz u tell me which slftware to flash..and how to do it?? My freind told me all solution to my problem's will be solved here
hopin i will get my solution
First of all, download the NVID (no vender) AKU2.2 from here. http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exe
Then, open activesync, select connection settings and UNCHECK the connect through USB option.
Then run the NVID file. It will take a while, and may seem to get stuck at 80% or 95%. Just leave it alone.
When that's done, you can either use it as it is, or load anyother ROM you want.
i have a bit similar problem
can some one plese guide me how to flash it with xp?????
Regards
First get a version of ActiveSync, any will do, but more recent is probably better. Then download the ROM (see above). In ActiveSync>Connection Settings uncheck the Connect through USB option. Then connect the Prophet.
Next Unzip the NVID file, and run RUU_PROPHET... This will flash your Prophet with a very basic ROM. If you then want to upgrade to a different ROM follow these steps: http://forum.xda-developers.com/showthread.php?t=310452
hello guys! i have a WIZA200. i'm was flashing it to wizflo2d ROm. at 99% my PC suddenly rebooted. my MDA is stucked with the red,green,blue screen. with IPL 2.26 SPL 2.26. activesync cannot detect it. how can i revive my MDA? please help...
BTW, i'm using TNT's new released ROM when i was flashing it to WizFlo2D.
thanks in advance
OmenCheppy said:
hello guys! i have a WIZA200. i'm was flashing it to wizflo2d ROm. at 99% my PC suddenly rebooted. my MDA is stucked with the red,green,blue screen. with IPL 2.26 SPL 2.26. activesync cannot detect it. how can i revive my MDA? please help...
BTW, i'm using TNT's new released ROM when i was flashing it to WizFlo2D.
thanks in advance
Click to expand...
Click to collapse
Hi,
No problem, be cool. Few months ago I had this problem and was solved.
Just connect the device with bootloader onscreen (RGB). You will see USB on bottom. Flash the official ROM.
After your device is stable, you can flash to any custom ROM.
Thanking You
I've just posted this in another thread but I'll give you the same reply..
---
Try starting in bootloader mode then flashing the Wizard Love rom using the included RUU, or failing that Mun's RUU (included with WizFlo).
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
You need to start the phone in bootloader mode without the usb cable plugged in, give it a few seconds, then plug the cable in.. wait for the USB icon to appear in the bottom left corner, then start your RUU. I've found that the order is very important when dealing with unflashable wizards.
I've unbricked my phone twice with this method.. You could flash Wizard Love to a loaf of bread if you could get the cable to stick in it.
---
I used this to recover a flash that died at 10%, when I couldnt even get the official rom to work, so hopefully it should help you.
I accidently HardSPL my Qtek 9100 phone with PProphet LF Xtreme BLUE V2
and now my phone is getting hung after showing first boot screen HTC INOVATION and comes to the blue page imate where it shows the IPL , SPL, GSM and OS information.
what will i do now please help me to revert my OS
by searching xda developers forum i come to reach at this URL http://forum.xda-developers.com/archive/index.php/t-275350.html
by pressing and hold camera button and turning on the qtek 9100 it comes to the multicolor boot screen here i connect my phone with usb and it shows usb at bottom of the screen of phone.. but now what should i do to revert back or to make my phone use able as i HardSPL my phone with wrong ROM
please help me, i will be very thankful to you guys.
waiting for replies, kindly reply me asap, i know you guys can do help me.
What IPL/SPL...? it displays? What exactly you mean by 'as i HardSPL my phone with wrong ROM' ?, Did you actually apply HardSPL (Patched IPL/SPL),does it show IPL 2.21.0001 and SPL 2.21.olip ? or it shows original official IPL/SPL.If its still with Official Bootloaders,then download the Official Qtek rom and flash it in Bootloaders (MultiColor Screen),when you get it and usb appears at the bottom of the Bootloader Screen,hope it'll work.
You can download the official Qtek rom from this link :-
http://s131209249.online.de/vodafone_software/9100.htm
Good luck!
Thanks zabardast_1
I solved my problem by the help of xda-developers I found another thread where i found the solution i was doing a little mistake that i wasn't disabling the Active Sync now I am happy and looking for some more custom roms
Thanks