Help onlangs heb ik een Htc diamond gekocht bij vodafone niet wetende dat dit soort toestellen "branded" waren. Hier zou ik graag vanaf willen en het schijnt te kunnen maar ik weet niet hoe. Wie kan en wil mij helpen???
Help, I have a branded Htc diamond by vodafone (the Netherlands) so i've heard that it is possible to make my htc unbranded but i don't know how.
Is there someone who can help me out???
PLEASE i like the newest updates
get reading
all you need is in the diamond rom threads.... http://forum.xda-developers.com/forumdisplay.php?f=430
good luck
tnx
liamhere said:
all you need is in the diamond rom threads.... http://forum.xda-developers.com/forumdisplay.php?f=430
good luck
Click to expand...
Click to collapse
Hi liamhere tnx a lot for the link when you are a noob like me it is hard to find.
I read almost al the threads but there are stil a lot of ?????? in my head.
Like: is it usefull to update spl to hard spl?
do i loose warrenty?(i realy do think so)
I am a little scared to update after reading al those threads.
regards,
arjan
Here more info
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
Yes you loose your warranty, but you can always go back to the opriginal ROM to make it valid
Related
wizard crossbow update failed at 95% help ipl 1.03 spl 1.03
i have installed WindowsMobileCrossbow_Most_Beautiful_Edition_OS_v1010811
i have tried to reflash another ROM but i can't even start the bootloader (3 colors screen)
ipl 1.03
spl 1.03
usb
i have tried the orginal file from qtec site
fout 326 invalid command.
this nbf file cannot be used for you pda phone please check your nbf file.
I will try again with cid unlocking
qtec 9100
PLEASE HELP
leothuis said:
wizard crossbow update failed at 95% help ipl 1.03 spl 1.03
i have installed WindowsMobileCrossbow_Most_Beautiful_Edition_OS_v1010811
i have tried to reflash another ROM but i can't even start the bootloader (3 colors screen)
ipl 1.03
spl 1.03
usb
i have tried the orginal file from qtec site
fout 326 invalid command.
this nbf file cannot be used for you pda phone please check your nbf file.
I will try again with cid unlocking
qtec 9100
PLEASE HELP
Click to expand...
Click to collapse
Just curious as to why you would try flashing a WM6 rom with a 1.03 bootloader.
EVERYTHING posted on this site and in the wiki tells you to upgrade to an AKU2.x carrier rom before flashing aku3 or WM6.
You will have all kinds of problems if you don't do this.
we need a MB WM6 ROM wiki page
hanmin said:
we need a MB WM6 ROM wiki page
Click to expand...
Click to collapse
I dont think we need to go that far, but i do think we need more people who read the forums. This user apparently didnt read that he needs to have at least 2.xx IPL and SPL and judging by the ipl and spl this user is trying on a non wizard phone.
edit: number of posts kinda shows lack of reading too.
hanmin said:
we need a MB WM6 ROM wiki page
Click to expand...
Click to collapse
would it have been read if it were there?
I don't think so. 1 post and flashing wm6 into 1.03 bootloader.
I don't think this person read much of anything other than finding a link to download something that they had to have but didn't want to take the time to figure out how to properly install. It's a good thing the Wizard is pretty forgiving on flashing issues.
Zzan said:
would it have been read if it were there?
I don't think so. 1 post and flashing wm6 into 1.03 bootloader.
I don't think this person read much of anything other than finding a link to download something that they had to have but didn't want to take the time to figure out how to properly install. It's a good thing the Wizard is pretty forgiving on flashing issues.
Click to expand...
Click to collapse
Hammer - meet nail.
Smack that right on the head.
Zzan said:
Just curious as to why you would try flashing a WM6 rom with a 1.03 bootloader.
EVERYTHING posted on this site and in the wiki tells you to upgrade to an AKU2.x carrier rom before flashing aku3 or WM6.
You will have all kinds of problems if you don't do this.
Click to expand...
Click to collapse
I have resistant the gedownload of news server and thereby stood that it was for my qtec for that on this forum had never been.
leothuis said:
I have resistant the gedownload of news server and thereby stood that it was for my qtec for that on this forum had never been.
Click to expand...
Click to collapse
Huh? I dont understand
leothuis said:
I have resistant the gedownload of news server and thereby stood that it was for my qtec for that on this forum had never been.
Click to expand...
Click to collapse
Wow, you're English is very bad! Let me translate this dutch/english combination to something more readable:
He downloaded the rom from the newsgroups which said the rom was for his device. He never heard of this forum before he got into troubles (AKA didn't do any research before flashing ).
Well Leo.... download the original rom from you're carrier and flash this from the bootloader screen.
thanks for translate Vippie
now in dutch
Ik heb alles al geprobeerd van de originele site van qtec maar helaas niks wil meer lukken alles loopt vast op 95% bedankt.
What do you mean by everything get's stuck at 95%? Flashing usually hangs for a few minutes around 95%... give it some time. Does it give an error? I don't think you're device has a qtec CID-lock (it told you it wasn't for your device), but a vodafone CID-lock. Did you purchase it from vodafone? You should look for a rom on their site.
Send me a PM if you want to be helped in dutch!
revive his babe
I see we havent answered the initial post. read b4 or not, he is in trouble. does anyone know how he can revive his babe?
stad4real said:
I see we havent answered the initial post. read b4 or not, he is in trouble. does anyone know how he can revive his babe?
Click to expand...
Click to collapse
yes. He must flash a carrier rom from his carrier into his device to recover it.
Once that is done and his device is again working properly and has bootloader (IPL/SPL) both 2.xx then he can reflash with his WM6 rom and will be fine.
Provided he is CID unlocked of course, which I am 99.9% sure that he is still CID locked, and further steps will be required before he can flash the WM6 rom.
I will not list those steps in this thread as there are multiple stickies that will direct him through the necessary steps.
Step 1 read.
Step 2 read some more.
Step 3 read even more.
Step 4 ask questions about the things you don't understand.
Step 5 PLAN your flash, have a recovery plan before you need it.
Step 6 go over your plan and make sure you didn't skip steps or forget any.
Step 7 read all pertinent threads again just to make sure.
Step 8 flash your device.
Step 9 enjoy.
working
my device is working now tanks you all
help me in het nederlands
heej ik las net toevallig van de cid unlock ik heb dat probleem ook bij de 95% dat hij vast loopt en niks meer doet ik ben er mee naar pda parts geweest in breda noord braband maar die kunnen er ook niks meer mee ze zeggen dat alleen deze rom er op ken
* Romversion 1.6.7.1. WWE
* Romdate 11/28/05
* RadioVersion 02.19.11
* ProtocolVersion 4.1.13.09
deze staat er nu op maar ik wil de nieuwst rom wat kan ik doen en ben je bereid mij te helpen ik word er gek van!!
Gr. Arthur
tuurtje123 said:
heej ik las net toevallig van de cid unlock ik heb dat probleem ook bij de 95% dat hij vast loopt en niks meer doet ik ben er mee naar pda parts geweest in breda noord braband maar die kunnen er ook niks meer mee ze zeggen dat alleen deze rom er op ken
* Romversion 1.6.7.1. WWE
* Romdate 11/28/05
* RadioVersion 02.19.11
* ProtocolVersion 4.1.13.09
deze staat er nu op maar ik wil de nieuwst rom wat kan ik doen en ben je bereid mij te helpen ik word er gek van!!
Gr. Arthur
Click to expand...
Click to collapse
anyone translating that ?
wooow , do you see how many words in a single sentence ?
no offence
dar ce am face daca fiecare ar vorbi in limba lui ? hehe
anichillus said:
anyone translating that ?
Click to expand...
Click to collapse
I'm assuming they are having a problem with it getting stuck at 95% (but thats a pure guess). But whatever it is, they need to read and follow this:
http://forum.xda-developers.com/showthread.php?t=298613
mfrazzz said:
I'm assuming they are having a problem with it getting stuck at 95% (but thats a pure guess). But whatever it is, they need to read and follow this:
http://forum.xda-developers.com/showthread.php?t=298613
Click to expand...
Click to collapse
That's like the absolute trouth )
The answer to all questions .
tuurtje123 said:
heej ik las net toevallig van de cid unlock ik heb dat probleem ook bij de 95% dat hij vast loopt en niks meer doet ik ben er mee naar pda parts geweest in breda noord braband maar die kunnen er ook niks meer mee ze zeggen dat alleen deze rom er op ken
* Romversion 1.6.7.1. WWE
* Romdate 11/28/05
* RadioVersion 02.19.11
* ProtocolVersion 4.1.13.09
deze staat er nu op maar ik wil de nieuwst rom wat kan ik doen en ben je bereid mij te helpen ik word er gek van!!
Gr. Arthur
Click to expand...
Click to collapse
Kan je wel een beetje Engels? Want wat je moet doen is deze link stapje voor stapje volgen: http://forum.xda-developers.com/showthread.php?t=298613
Als je er niet uitkomt stuur mij dan een private message!
Translated into something we all understand :
Can you read a little bit of English at all? Because all you got to do is go through this link step by step: http://forum.xda-developers.com/showthread.php?t=298613
If you have questions.... PM me!
Hello i can not flash any rom i would like to flash the orginal htc 6.1 udate(dutch)
i flashed many roms but yesterday the troubles started. some times flashing thing stopped. i found a solution to recover from bad flashes (THANKS XDA FRIENDS!! for doing so much work for a stupid phone) but today igive a new try but i got an error 226 flash write or something(i forgot because i am angry) someone can help me and tell me whats wrong?? i used spl... 3.29 or do i need hard-spl 1?
Tool i used to recover from bad flash :KAISIMG.NBH and KAISDIAG.NBH
extra tool to flash and chanche pagepool: PagePool Changer.exe(it is in a kaiser kitchen i found here on xda)
this things make me mad.
is there a tutorial to flash from SD card?
can someone help me please???
sorry for my bad English
wiebenik said:
Hello i can not flash any rom i would like to flash the orginal htc 6.1 udate(dutch)
i flashed many roms but yesterday the troubles started. some times flashing thing stopped. i found a solution to recover from bad flashes (THANKS XDA FRIENDS!! for doing so much work for a stupid phone) but today igive a new try but i got an error 226 flash write or something(i forgot because i am angry) someone can help me and tell me whats wrong?? i used spl... 3.29 or do i need hard-spl 1?
Tool i used to recover from bad flash :KAISIMG.NBH and KAISDIAG.NBH
extra tool to flash and chanche pagepool: PagePool Changer.exe(it is in a kaiser kitchen i found here on xda)
this things make me mad.
is there a tutorial to flash from SD card?
can someone help me please???
sorry for my bad English
Click to expand...
Click to collapse
hello
if you have buy from ebay or from somewhere else your mobile and not from your country is deferent language so you must unlocked first..
you must found super CID
after unlock you must flash the "Hard SPL 3.29"
now if you have stuck now with no windows try your solution with KAISIMG.NBH and KAISDIAG.NBH or try to flash HTC 3.28 WWE
here is super cid:
http://forum.xda-developers.com/showthread.php?t=361236
and here hard spl:
http://forum.xda-developers.com/showthread.php?t=396922
try looking here:
http://mbarvian.freehostia.com/2008/09/10/flashing-your-first-rom/
i had that yesterday.
just flash a rom
i flashed Solace V1.5 and it's all working
rohithathie said:
i had that yesterday.
just flash a rom
i flashed Solace V1.5 and it's all working
Click to expand...
Click to collapse
but, the poster mentioned he wants to flash back ( or forward i.d.c. ) to the orginal htc rom in his case( dutch, eq. Nederlands ) and he has flashed a few roms as stated also. so plz help this poor guy to fix/unbrick his kaiser phone
and also try to read his post before comment.
ill hope you can work it out dude.
ps. veel succes
je kan proberen op je sd kaart te zetten.
noem de NBH file : KAISIMG.nbh
zet hem in de root van je sd kaart, zorg wel dat je sd kaart Fat 32 is en nie 16.
als je dat hebt gedaan, druk je de camera knop in en tegelijkertijd reset je hem houd de camera knop in totdat hij vanzelf zegt druk powerknop in om te flashen
door de camera knop inte houden bij een reset kom je in de bootloader, hier is ook info over de spl te zien.
als je in de buurt van eindhoven woont, kan ik hem ook wel fixen voor je als het je echt niet lukt (hoop ik)
als dit allemaal niet werkt, probeer gewoon een custom rom te flashen, zodat je kaiser tenminste weer kan gebruiken.
succes!
----------------------------------------------------------------------------
you can try on your sd card
call the NBH file: KAISIMG.nbh
put him in the root of your sd card, make sure to format your sd card to FAT32 not FAT16
if you've done, you press the camera button and hold it reset it and wait for the message to press power button to flash
if all this does not work, try just a custom Flash ROM, so you can use your kaiser.
good luck!
May sound dumb but try this........When the updater just starts and right when your phone turns to the bootloader mode (the 3 color screen) unplug your USB cord from the phone wait a 10-30 seconds (usually mine will work if i wait only 5 seconds) and plug it back in and wait and see if it starts.
Is your device Security Unlocked or have you recently done so?
When you get this error did the update progress go to 100% or stay at 0%??
rohithathie said:
je kan proberen op je sd kaart te zetten.
noem de NBH file : KAISIMG.nbh
zet hem in de root van je sd kaart, zorg wel dat je sd kaart Fat 32 is en nie 16.
als je dat hebt gedaan, druk je de camera knop in en tegelijkertijd reset je hem houd de camera knop in totdat hij vanzelf zegt druk powerknop in om te flashen
door de camera knop inte houden bij een reset kom je in de bootloader, hier is ook info over de spl te zien.
als je in de buurt van eindhoven woont, kan ik hem ook wel fixen voor je als het je echt niet lukt (hoop ik)
als dit allemaal niet werkt, probeer gewoon een custom rom te flashen, zodat je kaiser tenminste weer kan gebruiken.
succes!
Click to expand...
Click to collapse
Please post in English, it is the agreed forum language.
Thanks
Dave
i can see that he is dutch, he write's his post in bad english, so i help him in dutch, so he can understand it better!
rohithathie said:
i can see that he is dutch, he write's his post in bad english, so i help him in dutch, so he can understand it better!
Click to expand...
Click to collapse
Thats OK, but please post a translation also as per the forum rules: http://forum.xda-developers.com/showthread.php?t=221545
Thanks
Dave
ok google translate will do the work
rohithathie said:
ok google translate will do the work
Click to expand...
Click to collapse
Originally Posted by rohithathie View Post
translation:
You can also try to put the file on youre SD card, rename the NBH file --> KAISIMG.nbg
Put the file into the root of your SD card. MAke sure that your sd card is fat 32 formatted and not 16.
When your done with that, hold and press the camera button and at the same time hit the reset button, keep holding down the camere button until you see the tri-color screen, you will enter the bootloader mode, you can also find information about your already installed SPL.
( rest is a bit dutch news: if you live in the neigbourhood( near eindhoven ) i want to fix this problem for you, if you like to let me do it. )
as last he stated: if this stuff aint working try to flash a custom rom so you can use ur kaiser again, ( its better than nothing )
Goodluck!
zet hem in de root van je sd kaart, zorg wel dat je sd kaart Fat 32 is en nie 16.
als je dat hebt gedaan, druk je de camera knop in en tegelijkertijd reset je hem houd de camera knop in totdat hij vanzelf zegt druk powerknop in om te flashen
door de camera knop inte houden bij een reset kom je in de bootloader, hier is ook info over de spl te zien.
als je in de buurt van eindhoven woont, kan ik hem ook wel fixen voor je als het je echt niet lukt (hoop ik)
als dit allemaal niet werkt, probeer gewoon een custom rom te flashen, zodat je kaiser tenminste weer kan gebruiken.
succes!
nothing worked for me
hello thanks for your attention for me.
a tried all the things here.
in the past few months iflashed allot of roms and no problems until i flashed...
throttle diamond 2 rom. i still not able to flash something.
even from sd card.
some text light up in red telling me that something is wrong(grmmbl)
i unchecked the option on my phone: advanced network connection in connections tab USB TO PC connecton.
i can boot up and use my phone thats not the problem. i cannot flash back to the official rom update 6.1 because i would try Navigon 7.
it give me installation errors so i thought it is better to get an orginal rom...right?
hope you have more tips.
bedankt nederlandse vrienden voor jullie hulp
wiebenik said:
hello thanks for your attention for me.
a tried all the things here.
in the past few months iflashed allot of roms and no problems until i flashed...
throttle diamond 2 rom. i still not able to flash something.
even from sd card.
some text light up in red telling me that something is wrong(grmmbl)
i unchecked the option on my phone: advanced network connection in connections tab USB TO PC connecton.
i can boot up and use my phone thats not the problem. i cannot flash back to the official rom update 6.1 because i would try Navigon 7.
it give me installation errors so i thought it is better to get an orginal rom...right?
hope you have more tips.
bedankt nederlandse vrienden voor jullie hulp
Click to expand...
Click to collapse
What the rom you have on your phone right now?
wich rom i use
throttle diamond 2
Hi,
I have a dutch T-Mobile ROM on my MDA Vario IV (HTC Touch Pro). I want to have a normal HTC stock-ROM installed, because I hate the pink touchflo stuff and I've tried some other themes with the TF3D tool, but they just don't work right and slow the phone down.
I've searched all over the forums but I just can't seem to find a step by step tutorial on flashing my phone. I did find something on the web. Can somebody confirm this is the way to go?
First I backed up all my data and did the HardSPL thing, that worked (checked it with the reset to the three color-screen).
Then I wanted to flash my ROM to the stock Dutch HTC ROM. I downloaded two files from the wiki page. But with both files, the ROM I'm going to put on is older than the new one. Is that right? Is there anyone here who might have flashed his/her dutch T-mobile branded Touch Pro maybe who can tell me which files were used? What is the latest dutch stock HTC Pro ROM? Is that the one in the Wiki?
Sorry for all those questions, I'm a Touch Pro flashingvirgin
All help appreciated!
Thanks in advance
Casper
Hmm, got impatient and started trying stuff. Have a flashed one now, but found out I messed up my backup
Anyhow, this thread can be closed.
AuB help!
Beste Sparce,
Ik heb ook T-Mobile en ik heb hun recente update met widgets uitgevoerd. Hier baal ik enorm van, want er zijn veel te weinig widgets en andere programma's zoals Weather is er uit gehaald.
Ik zou graag zoals jij naar de originele versie van htc terug willen. Hoe heb jij dit gedaan?
Waar heb je de bestanden vandaan gehaald?
Krijg je met het netwerk, zoals GPRS en mms etc. geen problemen? Zo ja hoe heb je dit dan opgelost?
Thanks voor je reactie.
Groeten
Daniel
Het zit zo dat ik geen bepaalde films kan afspelen omdat mijn ram geheugen te klein is.
Ik het bevoorbeeld mogelijk om een app te download om mijn ram geheugen te verhogen?
XDA Visitor said:
Het zit zo dat ik geen bepaalde films kan afspelen omdat mijn ram geheugen te klein is.
Ik het bevoorbeeld mogelijk om een app te download om mijn ram geheugen te verhogen?
Click to expand...
Click to collapse
1. This is an international forum where we have to use English language. So please post in English. You can use an online translator (e.g. Google translate).
2. As far as I understood, you have some storage issues when downloading videos. Maybe the [APP][MOD]OGYouTube Beta v0.9 Downloader, Popup/Background/ScreenOff Playback by OGMods can help.
3. For general questions about your device, best to register on xda and ask in the Xperia Z2 Tablet Q&A, Help & Troubleshooting forum.
There you will get answers and advices from users having the same device like you.
Good luck / succes !
Thread closed. Thank you!
Sorry that i bring this Problem here again, but i have no Answer: How can i bring to work the Google Assistant on GW4?? i see, the Assistant is on the Watch, but, when i connect to the Phone, it says : ""Your Language is not suported on this device"..I live in Austria and my Watch is German Version. My Phone: Oppo Find x3 Pro. PLC Help
Bobyroby said:
Sorry dat ik dit probleem hier opnieuw breng, maar ik heb geen antwoord: hoe kan ik de Google Assistent op GW4 aan het werk zetten?? Ik zie dat de Assistent op het horloge staat, maar als ik verbinding maak met de telefoon, staat er: ""Uw taal wordt niet ondersteund op dit apparaat". Ik woon in Oostenrijk en mijn horloge is een Duitse versie. Mijn telefoon: Oppo Vind x3 Pro.PLC Help
Click to expand...
Click to collapse
erst engels instellen kijk of het werkt daarna eiegen taal instellen
Mod translation via GT: seriousness set english see if it works then set own language
dont work. sono disperato...
Set English language. Only 1 not a second!
Then setup the app and after finishing choose the language you want.
anonymous-_ said:
Set English language. Only 1 not a second!
Then setup the app and after finishing choose the language you want.
Click to expand...
Click to collapse
Set English on the Phone?
Bobyroby said:
Set English on the Phone?
Click to expand...
Click to collapse
Yes. After you get it work add your language as secondary