Database Info

You think you BRICKED your phone...Post here!!!

oh no, oh no, what have i done??
I've created a little problem for myself. While at work I performed a wipe/restore on my phone. I have modified rc30 jf 1.3 and when my phone is booting up now I get stuck at the android screen. The green light near the ear piece comes on and a ringing can be heard from the speaker. I have tried to wipe again to no avail. Has anyone heard of this happening? Is it because I have a theme file on my sd card named update.zip? I know I can't be the only one to brick their phone!

blehman said:
I've created a little problem for myself. While at work I performed a wipe/restore on my phone. I have modified rc30 jf 1.3 and when my phone is booting up now I get stuck at the android screen. The green light near the ear piece comes on and a ringing can be heard from the speaker. I have tried to wipe again to no avail. Has anyone heard of this happening? Is it because I have a theme file on my sd card named update.zip? I know I can't be the only one to brick their phone!
Click to expand...
Click to collapse
Try reflashing JF 1.3. Did u create a backup?

I did not backup. I will reflash when I get home.

blehman said:
I did not backup. I will reflash when I get home.
Click to expand...
Click to collapse
That should work. I had the same problem.

thanks, i need to hear that.

how would i go about using hard spl to bring it back from the dead?

Foolproof solution would be to use RC29 DREAIMG.NBH. More intricate solution is to fastboot flash your nand backups (provided you had the foresight to make backups in the first place).

What jashsu said. I nearly bricked my phone once but reflashing with RC29 was the quick and easy way of saving it.

i need help think that i am bricked
I was on 1.1 ADP JF with the mac 2.2 theme for 1.1 ADP i wanted to get back to the original theme so first i installed the restore theme thing on the fourms after this i have been stuck at the android screen when booting. i have tried to the wipe alt W but right now i am downloading the image file to get back to the original rc 30... can anyone help me out??? i really need to my phone tommorow and help would be much appreciated thank you

Assuming that you have the JF recovery utility, you should be able to copy the update.zip for RC30 to the sdcard (take the sd card out of the phone and copy update.zip to it), and apply the update from the JF recovery utility. You can get into the recovery utility by holding home+power when booting the G1. I hope this helps.

assuming if the above post don't get you up and running you will want to donwload the stock rc29 dreamimg file and copy that manually to your memory card and with the phone off. Hold down the camera button while turning on and you will get a grey screen the and should let you flash back to the original rc29 if you can't to an alt w whipe this would be the next thing I would recomend.

Just to clarify you said your phone is the adp - android developer phone, a phone that allows you to restore the phone to earlier states?
If this is the case you just need to grab a recovery image and reflash your phone by depressing camera on boot or using fastboot to restore your phone to an earlier backed up configuration.
If you don't have the developer phone, and infact have a rooted handset with a custom firmware such as JF your best bet would be as above to roll back to rc29 or rc07 if you're uk based using RC29 DREAMING.nbh -steps can be found here http://android-dls.com/wiki/index.php?title=Root_For_RC30
The downside is this will require you to reroot your phone. May i suggest in future if you do NOT have a developed phone you install Nandroid and do regular backups before playing with your phone -details here http://androidcommunity.com/forums/f28/nandroid-v2-0-full-nand-backup-and-restore-tool-9336/
Let us know hopw you get on and if we can offer any further assistance.

ok thanks guys
i installed rc 30's official image to my g1 by power+camera and everything is fine besides being unrooted i think i will root back to ADP again because of its advantages but if i am the flash a theme once again how do i get back to original theme because im sorry but i still dont understand the steps needed to do this from a ADP 1.1 jf build ty

You should have tried updating back to the 1.1 ADP JF version you were on first, would have saved you alot of time.

Hey! I assume for the purposes of this post and on accout of your having dev phon firmware you know how to use fast boot. if not go to http://androidcommunity.com/forums/f28/nandroid-v2-0-full-nand-backup-and-restore-tool-9336/
Anyway if you restart your phone with the home button depressed alt b makes a back up, use fastboot to flash this to your phone and restore it to an earlier state!!!!

Can the G1 officially be bricked?
I know you can screw up and update or 2...but with the PWR + Camera thing and the Home + PWR update method...is there a way to officially brick the G1? or is it relatively brick-proof?

I wouldn't think any phone is brick-proof. Then again, the G1 does seem more "mod" friendly than others.

Flash a corrupt SPL and you will have a brick really fast

AbsoluteDesignz said:
I know you can screw up and update or 2...but with the PWR + Camera thing and the Home + PWR update method...is there a way to officially brick the G1? or is it relatively brick-proof?
Click to expand...
Click to collapse
Try it really quick and please post your results lol

I might be wrong, but I think as long as we don't mess with the boot loader, it should always be able to start with camera-power

The G1 Night Light (READ FIRST IF YOU BRICKED YOUR PHONE)

Many people complain that they have "bricked" their phones when they really haven't. This thread will hopefully help reduce the questions on all of our useful threads.
How to tell if your phone is bricked:
1.) When you try to turn it on, nothing happens?
2.) Camera+Power does nothing.
3.) Home+Power does nothing.
4.) You flashed the SPL BEFORE the radio
If you answered yes to any of the above 4, you are bricked. You probably need a new board in the phone. Read more here: http://forum.xda-developers.com/showthread.php?t=516440 It has been confirmed that you WILL brick your phone if you attempt to downgrade your radio after flashing the new SPL. Not sure why you would want to anyways...
How to tell if you just need to re-flash:
1.) Your phone is stuck on the g1 logo
2.) Your phone is stuck in a boot loop
3.) Home+Power boots into recovery
If you answered yes to the above then you are NOT bricked. You have the G1 Night Light. This is (usually) a very easy fix.
The usual scenario is: You just upgraded your radio and/or the SPL on your phone and now you are trying to turn it on with no luck.
How to fix: After you upgrade your radio and/or SPL, you need to wipe a rom on the phone. For a plain almost stock feeling rom, checkout http://jf.andblogs.net/2009/05/24/jfv151-images-are-out/ if you are looking for hero, checkout the tutorial at g1upgrade.com.
I have also noticed when you flash hero, it will stay on the g1 logo for 5 or 6 minutes and then it'll finally start loading. Make sure your not being impatient and give it several minutes if you have just flashed a rom.
Last step:
If you have installed a new radio, then spl, then a new rom and you STILL get the g1 screen. Try it all over again. You probably didn't do something right. You don't need to ask questions in 30 different threads, your issue is not unique. You just need to search for some answers.

*Saved for future posts*

Edit:

Thanks! Updated.

I flashed the SPL before the radio whenever Haykuro released the Hero ROM and I didn't brick my device. Guess that I just got lucky. Thank goodness I know better now. haha

it's possible you flashed the radio prior to the SPL, only a loooong ways back.

Another thing to try if you are having issues is:
su
rm -r /system/sd/*
I was stuck in a boot loop and a quick ext3 wipe did the trick. The command should be able to be ran from console or terminal. You may need to mount /system with:
mount -t -rw,remount -o yaffs2 /dev/block/mtdblock3 /system
You would need to type that in between the commands above . I ran across this in another post but i think this is a good spot for it too .

Duplicate post...

thanx
At least I know now how to tell if I bricked my phone or just flashed it badly thanks for this.

youneek said:
How to tell if you just need to re-flash:
1.) Your phone is stuck on the g1 logo
Click to expand...
Click to collapse
many people who flashed the new SPL before the radio are stuck at the G1 splash logo, but cannot get to recovery or spl bootloader / fastboot mode regardless of what they do, so this bit might be misleading...
they aren't technically "bricked" b/c it's loading the radio rom, but it never hands off to the SPL, so there is currently no way of reloading either of those to make the device do anything useful -- essentially a brick

alapapa said:
many people who flashed the new SPL before the radio are stuck at the G1 splash logo, but cannot get to recovery or spl bootloader / fastboot mode regardless of what they do, so this bit might be misleading...
they aren't technically "bricked" b/c it's loading the radio rom, but it never hands off to the SPL, so there is currently no way of reloading either of those to make the device do anything useful -- essentially a brick
Click to expand...
Click to collapse
This is exactly what happened to me, it was a brick, sent for repair and they replaced the mainboard.

I have fixed 2 phones that had no recovery and stuck at the g1 screen. If someone has this problem message me and I'll help you fix.

Good Job
Sorry this is off topic. But...
Thank you for this thread!
Ok,
By the way, has anyone figured out what The difference in the baseband is?? I have a U in mine...

youneek said:
I have fixed 2 phones that had no recovery and stuck at the g1 screen. If someone has this problem message me and I'll help you fix.
Click to expand...
Click to collapse
really? if it can't get to recovery / fastboot mode nobody has published a fix w/o a hardware swap.
what's your method?

I will buy a bricked one off ebay and post the steps I do to get it back. I can only fix the "Night Light", I can't fix a truly bricked phone (yet).

digital006 said:
This is exactly what happened to me, it was a brick, sent for repair and they replaced the mainboard.
Click to expand...
Click to collapse
How and where did you sent for repair and how much does it cost? I have a bricked MyTouch3G at this moment. Did HTC took it?

not bricked just weird!
ok been reading on here ,not sure if i need to just reflash everything or sd issuse?i put the new raidio,then spl on !then put jacxrom on my phone worked great!then ran for a day.then tryed cyanogenmod 4.0 and loaded fine but got force closed issues at the google sign in so i wipe and went to jachero 1.2 loaded fine went to logo android and then htc ,but then the screen went to blank .like the as said g1 night light .so i went back to jacxrom 1.3 it loaded fine got stuck in t mobile g1 screen .ok i flashed again same thing. but this is the part if i take my memory card out it will boot up just fine!then put memory card back in but lol all apps are missing have reinstall them. i wipe every time.i have the latest raidio 22.19.26I).,spl 1.33.2005 .also the jacxrom is running fine when phones on .so any help please thanks .also when i put the spl on it loaded then said reboot so i did. after went back to recovery at the bottom it said formatting cach... but was setting there for a while so took battery out then booted phone .was it suposse to say done or not ! hope dont make any mad thanks for the info

bump

hey help me plz i have big problem
i forget hit alt+w when i install SPL then i press alt+s when SPL install i out battery then i put it my mobile don’t want open and when i holding down the Home and Power button don’t open recovery mode and i holding the End key and the Camera button don’t open boot loader plz help me plz

You aren't going to get any help with sentences that atrocious. Can you be more clear?

How 2 Root 1.33.0006 SPL & Flash SPL || MyTouch3G / 32B Magic || Without Goldcard ||

How 2 Root 1.33.0006 SPL & Flash SPL || MyTouch3G / 32B Magic || Without Goldcard ||
Tutorial : Rooting the "perfect" 1.33.0006 SPL & Flashing a new SPL
Newb Difficulty Level: 5/10 (A learning android newb)
Advanced Root User Difficulty Level: EASY!
GIVE CREDIT WHEN ITS DUE!
Note to readers:
I actually found a easy fix for 1.33.0006 for 32B Magic or MYTouch3G phones
KEEP IN MIND THAT I AM USING A MERLOT MYTOUCH3G, Stock 4GB SD card & BROKEN "Market" Application SO MAKE SURE YOUR DOWNLOADING THE FILES THAT WORK BEST FOR YOUR DEVICE and I am only providing steps used to bypass the "PERFECT SPL 1.33.0006" & YOUR RESPONSIBLE FOR THE RESULT OF YOUR DEVICE!
FILES I USED:
*ADB is a MUST so make sure to watch this video to safely install ADB
(NOTE: The video is using 1.6 donut spk... the steps are the same but use the 1.5 r3 spk on the same page given on the video.)
*flashrec-20090815.apk
MAKE SURE YOU USE THIS VERSION...!
* "Rooted" Recovery Image
I am using Amon_Ra's recovery-RA-magic-v1.2.3G which in my opinion is the best as it has flashed every rom perfectly if you know what your doing but it depends on what rom you will be flashing in some cases.
* A NEW SPL!
I am currently using Engineering-SPL-HBOOT-1.33.2009-signed by Amon_RA (BIG UPs TO Amon_RA for these files) on my T-Mo MyTouch3G but it depends on your device.
NOW TO WORK!
Step One - Enable USB Debug/Development Mode:
*Load up your device till you reach your home screen. Once your device is up and running hold menu and go to settings>applications>development then enable "USB Debugging" then press home & plug the device up to your PC & DONT MOUNT.
Step Two - Install Recovery Image Loader via ADB:
*Open CMD and as the video above stated you must navigate to your ADB folder. Once that is done you should install flashrec-20090815.apk (Recovery Image Loader) though CMD by placing it on both your SDCARD & the ADB Tools Folder (For me its C:\android\tools\).
~Now type these commands within CMD:
cd c:\android\tools (press enter)
adb install flashrec-20090815.apk (press enter)
*Now you have installed Recovery Image Loader and you may now close CMD but dont restart your device
Step Three - Rooting the unrootable (Sorta):
*Now find your recovery image ( Example : Recovery-RA-Magic-v1.2.3G.img or Recovery.img). Once found rename it as "cm-recovery-1.4.img"! Save this file to the root of your SDcard & delete the "flashrec-20090815.apk". now press backup recovery image and wait till its done (quick 2secs) then erase everything but "cm-recovery-1.4.img" within the text box. Now type " /sdcard/cm-recovery-1.4.img ". Now press FLASH RECOVERY IMAGE and wait till its done. Once its done restart the device and be aware that you will lose everything that isnt saved to your google account or backed up to your PC.
SMART COMMENT: WOW DID I JUST ROOT THE UNROOTABLE? I guess I did lol
Step Four - Change SPL to Prevent this issue in the future:
*Move the SPL ( & the ROM if you want to start installing it right away ) you downloaded earlier to your SD card and delete everything else if you want. Now select "WIPE/FACTORY SETTINGS" and follow on screen instructions and then do this a additional 2 times to be safe. Now flash the SPL and once it starts to reboot on its own (after it shows the picture of a box and a device) hold the home button and then FLASH YOUR ROM
THATS IT! YOUR DONE AND YES I DID SHOW YOU HOW TO ROOT 1.33.0006 but it doesnt run properly so make sure you flashed a new SPL before flashing any new "Radio" or "ROM" images or you could brick your device.
HOPE THIS HELPED MANY WHO HAD PROBLEMS ROOTING THE DEVICE!​

isn't this just the same as the one click root? cuz on the one click root you don't need adb. It just seems like you are adding necessary steps to it. Please correct me if I am wrong. I don't mean to bash your work by any means.

I don't see why no one else has congratulated you on compiling one of these for those people that might eventually NEED THIS GUIDE! Lol.
Great work. Simple.
I had the "perfected SPL" when I picked up my MT3G on the release date. Pretty unfortunate...but I rooted it like two days later. Lol.

I never got an answer in the other SPL thread so here it goes...
Can we safely go from one SPL to another?? The reason I ask is I have the problem with the blurry screen at boot but I only encountered it when I flashed a new SPL. Now I have read up on it & it looks like some people running the same ROM with different SPL's don't have the blurry screen.
Seeing how so many people had problems bricking with haykuro's DangerSPL, the SPL is something I don't wanna mess with unless I have a definate answer. So anyone wanna chime in on this?

Beast84 said:
I never got an answer in the other SPL thread so here it goes...
Can we safely go from one SPL to another?? The reason I ask is I have the problem with the blurry screen at boot but I only encountered it when I flashed a new SPL. Now I have read up on it & it looks like some people running the same ROM with different SPL's don't have the blurry screen.
Seeing how so many people had problems bricking with haykuro's DangerSPL, the SPL is something I don't wanna mess with unless I have a definate answer. So anyone wanna chime in on this?
Click to expand...
Click to collapse
yea... could i go from 2005 one to the 2009 one? any help there?

bogdi1988 said:
yea... could i go from 2005 one to the 2009 one? any help there?
Click to expand...
Click to collapse
@Everyone above (excluding Reignzone)
Lol really? okay try flashing 1.33.0006 haha
It wont be as easy as you all think
@Reignzone
Thanks

Azuske said:
@Everyone above (excluding Reignzone)
Lol really? okay try flashing 1.33.0006 haha
It wont be as easy as you all think
@Reignzone
Thanks
Click to expand...
Click to collapse
No, you are right it won't be, but if you downgrade back to cupcake, you can one click again. Anyway, nice post man. Great job.

Thanks
Thats exactly why I posted this because I had a hard time getting back to cupcake because of the spl

Hello there, thanks for the guide.
I try to follow your guide to root my HTC Magic and I have some questions.
1. I run the command "adb install flashrec-20090815.apk " and it installed the flashrec to "/data/local/tmp" directory. Is this correct?
2. I copied the recovery image to the sd card and insert into the phone. then based on you guide. I should delete the flashrec I installed while ago. But I cannot delete the file. Can you give us more details regarding this one? Thanks.
3. Sorry but I have some hard time to sollow the step three. Can you give us more details about this.
thank you and good day
Steven

To be 100% honest im not sure where it is saved... i just happened to run into a working solution at random.
I do know that the older version i tried (Recovery Image app) didnt want to install

Reignzone said:
I don't see why no one else has congratulated you on compiling one of these for those people that might eventually NEED THIS GUIDE! Lol.
.
Click to expand...
Click to collapse
Umm because it doesn't do anything. flashrec ANY VERSION does NOT work on a phone with 1.33.0006

scrufy Originally Posted by Reignzone I don't see why no one else has congratulated y for those people that might eventually NEED TH. Umm because it doesn't do anything. flashrec ANY VERSIO phone with 1.33.0006 Today 03:28 Pm. Yes it did for me. at least in cupcake.I'm not sure in donut.guess you have to downgrade to cupcake.

scrufy said:
Umm because it doesn't do anything. flashrec ANY VERSION does NOT work on a phone with 1.33.0006
Click to expand...
Click to collapse
LOL WOW he had the same problems dude and he is a developer...
Maybe you did something wrong when installing it

Azuske said:
@Everyone above (excluding Reignzone)
Lol really? okay try flashing 1.33.0006 haha
It wont be as easy as you all think
@Reignzone
Thanks
Click to expand...
Click to collapse
So basically what you're saying is you don't know?? If you don't, that's cool. But don't laugh & then not give an answer. Just makes you seem arrogant, like you feel better than us. Which, by the way, YOU AREN'T!

Beast84 said:
So basically what you're saying is you don't know?? If you don't, that's cool. But don't laugh & then not give an answer. Just makes you seem arrogant, like you feel better than us. Which, by the way, YOU AREN'T!
Click to expand...
Click to collapse
Sorry if you took it that way but that isn't what runs through my head when I laugh or anything... My bad -_-
ANYWAY I only know what I posted... I am a learning newb and I am getting better at this stuff as I go. My tutorial explains exactly what I did.
EDIT:
P.S. My smartass comment was for the people that was calling this useless just because they didn't experience this issue

Azuske said:
Sorry if you took it that way but that isn't what runs through my head when I laugh or anything... My bad -_-
ANYWAY I only know what I posted... I am a learning newb and I am getting better at this stuff as I go. My tutorial explains exactly what I did.
EDIT:
P.S. My smartass comment was for the people that was calling this useless just because they didn't experience this issue
Click to expand...
Click to collapse
Eh no hard feelings, I was just looking for a straight answer. I just wanna get rid of that damn blurry screen, thats all. Thanks for the step by step tho. I did it the easy way with one click root but I did my G1 the hard way so I know how frustrating things can get. Thanks again

i was able to flash SPL 1.33.0006
I had rooted my MYTOUCH 3G in August using the one-click method. I have been running several ROMS since then. But I never tried to flash a new SPL. However, after reading this post I decided to give it a try. I booted into recovery mode/ wiped and then flash 1.33.2009 SPL. It loaded and rebooted into recovery again. I then wiped and loaded a ROM. everything is fine.
Later I checked and I now have 1.33.2009 SPL the perfect SPL 1.33.0006 is gone.

so im on a rooted mt3g, i have been running different roms, cyan, hero, dwang, i am at dwang 1.13. so to flash the 1.33.2009 spl do i have to wipe and flash to dwang 1.12 then flash the spl then dwang 1.13?
also what are the advantages/disadvantage?
which spl should i use?
thanks

Hi
I have 1.33.0004 on my 32B Sapphire and Android 1.6. Will this method help me root my phone? If not then is there an easy way to root my phone?
Thanks in advance

Rooting Mytouch Fender LE 32a/ Mytouch 1.2 UNIVERSAL ANDROOT CONFIRMED WORKING!!!

Universal Androot confirmed working. This method is no longer needed and is to dangourous for some people so please use universal androot 1.5.3+
IF READ CORRECTLY YOU WILL NOT BRICK. BUT, Since a few of you dont have that ability, I AM NOT RESPONSIBLE FOR YOU BRICKING YOUR PHONE. There are no pros to rooting this phone yet, leave it alone if you dont know what your doing PLEASE. I beg you. You are in essence almost bricking your phone in order to root it in the first place. These arent fun and games, It is dangerous to rush this stuff
Listen.. Im more then happy to help people. BUt I fully understand why so many devs have left this place. Some of you are so utterly ridiculous with your questions, wanting someone to hold your hand. I cant sit on gtalk for hours helping you go through what should take 10 min , I have a life and kids and other things to do. I did this because I was bored and wanted to see if I could. There is not point in rooting it yet, there are no roms, nor will there be for at least a month. Please, if you cant even understand simple questions, have never rooted or even used an android phone before, please.. do not bother me. This place is insane with stupidity. I will change the tutorial in a little more detail later, but fo rnow, DO NOT DO THIS IF YOU DONT KNOW WHAT YORU DOING. IF YOUR BREAK YOUR CRAP< I DONT CARE, BECAUSE IT WASNT MY FAULT.
I am in no way an angry or mean person, but you people have given me a migraine. I see why all the rom devs hide from here so much
THERE IS NO POINT IN ROOTING THIS PHONE YET PEOPLE, SO STOP.. OMG PLEASE STOP LOL
IT HAS BEEN DONE!!! lol
After 3 days, sleepless night and 5 min from returning the phone, Together with the Awesome Cursordroid We have achieved full root of the fender mytouch/ Mytouch 1.2 revision.
Now.. Understand.. not many will have the fender Mytouch.. but this is the hardware they WILL be using in the fully confirmed Mytouch 1.2
If you do not follow my instructions fully, NOTHING WILL WORK.
Start by making a working gold card, pay VERY CLOSE attention to what the instructions for making a gold card say
http://theunlockr.com/2009/08/14/how-to-root-your-mytouch-3g/
READ READ READ. DO NOT download the SAPPimg.zip file it says on that page.
Get the top fixed SPL file 2010 from here
http://forum.xda-developers.com/showpost.php?p=4332591&postcount=1
Once you have you working goldcard (remember, apply to PHYSICAL not LOGICAL) rename the fixed SPL/rom you just downloaded to SAPPIMG.img
Put that file on your gold card
Hold volume down while hitting power
You will boot into Hboot, and if goldcard was made correcly and file is in root, it will begin to read. MAke sure battery is full or chargeing. follow on screen directions for flashing. Reboot into Hboot.
You are now screwed with a downgraded SPL and radio that do not work on this phone YAAAAAAY.
Now grab the stock radio and SPL from Cursordroid here http://forum.xda-developers.com/showthread.php?p=5451898&posted=1#post5451898
From there on follow hiw directions for reupdating your radio and spl, plus give yourself a new recovery making ROOT.
Im not good at tutorials or typing on a tiny netbook keyboard so please forgive. Anyquestions please ask and I will go into more detail
In order
Goldcard
Amen ras fixed spl rom renamed SAPPIMG.img
Boot into Hboot volume down/power
let rom install saying yes to what it says. If it works..
Now boot into your recovery through fastboot
Flash phone with stock fender rom
reboot into fastboot
back out of update when it asks and flash STOCK radio and SPL back, now reboot
your splash screen for fender IS GONE, get over it. You can make a new one later if you realllly need to.

if you build the thread they will come, oh yes, they will come.

thebluecoat said:
if you build the thread they will come, oh yes, they will come.
Click to expand...
Click to collapse
lol.. I figured if I could get a thread up with all our info, maybe I could get more people interested just for the fact hat nothing now works... which means this could be the same build in the coming Mytouch 1.2 that is basicly the same exact phone as the fender.

hey, im new here but i have a rooted g1. and i've been skimming thru the fender pages.
I also work at tmobile and used my discount to snag the fender. but as of now im still using my rooted g1 which currently has a tiny scratch on it which i cant stand "hence why i got a fender".
seems to me once the new mytouches come out with the 32a and 3.5 mm jack there will be more attempting to pwn his phone.
im still fairly new to all of this soo im tryin to soak up as much knowledge as i can.
but still w/o the root. the fender still is a sweet phone haha.
idk what to do with it, it just sits in my room i havent even put my sim into it yet. im deciding either to sell it or just let it sit until it can be rooted.
i use the wireless tether too much to switch to the mytouch.
in the mean time g'luck! kinda rough for us LE owners cuz only few people have it to play around with.

This might be noob as I am not 100% sure what perfected SPL means, but I had a SPL that gave the fastboot "no remote" error.
I used an official SEA RUU that comes with a ENG SPL, then I could update change what ever I wanted.
Thought I would just through it out there.
My phone is a model A6161.

Make a goldcard.
Then try to find an official HTC RUU with version higher than 2.08.531.1 but which has an open SPL or is only Cupcake so 1-click-root will work.
If that doesn't work just try a regular sappimg.nbh, but with goldcard too.

maxisma said:
Make a goldcard.
Then try to find an official HTC RUU with version higher than 2.08.531.1 but which has an open SPL or is only Cupcake so 1-click-root will work.
If that doesn't work just try a regular sappimg.nbh, but with goldcard too.
Click to expand...
Click to collapse
The problem is after days of reading and trying 5 different sapp.img every file gets the same device id failure. But I do understand having to find a higher number rom so Ill start on that quest.
So basicly what you saying is I need to find a pre rooted "offcial" rom that has and eng SPL allready or a 1.5 rom with open spl?
Ill try the 1.5 cupcake idea because the goldcard methos so far doesnt seem to work but that would make sense if we are trying to use to old a versions to root.
Looks like I have a new project for the day lol

crypysmoker said:
The problem is after days of reading and trying 5 different sapp.img every file gets the same device id failure. But I do understand having to find a higher number rom so Ill start on that quest.
So basicly what you saying is I need to find a pre rooted "offcial" rom that has and eng SPL allready or a 1.5 rom with open spl?
Ill try the 1.5 cupcake idea because the goldcard methos so far doesnt seem to work but that would make sense if we are trying to use to old a versions to root.
Looks like I have a new project for the day lol
Click to expand...
Click to collapse
I've already tried that, didnt work for me, got "Invalid device ID" however, I cannot make a gold-card because I always get "damaged sd card" or windows says I need to format it right. I'm 100% sure I did it right to three different SD cards, and I still got the same error.
--edit-- if you successfully make a goldcard for this phone, Ill pm you for shipping info LOL!

crypysmoker said:
The problem is after days of reading and trying 5 different sapp.img every file gets the same device id failure. But I do understand having to find a higher number rom so Ill start on that quest.
So basicly what you saying is I need to find a pre rooted "offcial" rom that has and eng SPL allready or a 1.5 rom with open spl?
Ill try the 1.5 cupcake idea because the goldcard methos so far doesnt seem to work but that would make sense if we are trying to use to old a versions to root.
Looks like I have a new project for the day lol
Click to expand...
Click to collapse
I think, your current way will not end with success.
Wrong model id or device id means, that HTC decided pick out Fender in another serie. Yes, i agree, that Fender has same SPL as Magics, but trying flash anything, that has another model id like trying flash Hero's ROM to Tattoo.
SPL ia like a computer's BIOS. SO if you flash foreign bios - your comp will probably die....
Saddened by the fact that Fender is limited edition. So it will not have big knowledgebase like Magic.

5[Strogino] said:
I think, your current way will not end with success.
Wrong model id or device id means, that HTC decided pick out Fender in another serie. Yes, i agree, that Fender has same SPL as Magics, but trying flash anything, that has another model id like trying flash Hero's ROM to Tattoo.
SPL ia like a computer's BIOS. SO if you flash foreign bios - your comp will probably die....
Saddened by the fact that Fender is limited edition. So it will not have big knowledgebase like Magic.
Click to expand...
Click to collapse
While the Fender is le, the mt3g 1.2 is the same hardware, so hopefully someone will get it figured out.

chrys9989 said:
While the Fender is le, the mt3g 1.2 is the same hardware, so hopefully someone will get it figured out.
Click to expand...
Click to collapse
Oh. Chances growing up.

I'm new here, but typically how do people go about getting the attention of devs? Is it just create a thread an hope enough people show interest? Should we do a roll call of how many actually are interested in rooting this phone?

thebluecoat said:
I've already tried that, didnt work for me, got "Invalid device ID" however, I cannot make a gold-card because I always get "damaged sd card" or windows says I need to format it right. I'm 100% sure I did it right to three different SD cards, and I still got the same error.
--edit-- if you successfully make a goldcard for this phone, Ill pm you for shipping info LOL!
Click to expand...
Click to collapse
No.. I got the gold card made. The only reason it ever comes up as damged or reformat is because you applied the goldimg to the logical drive which is at top of list as opposed to Physical REMOVABLE DISK at the bottm. Its the only time I can get the error. but if I apply the goldimg to the logical drive it makes a perfect goldcard everytime. I tested it on aspar g1. So... its not a godl card problem lol

maxisma said:
Make a goldcard.
Then try to find an official HTC RUU with version higher than 2.08.531.1 but which has an open SPL or is only Cupcake so 1-click-root will work.
If that doesn't work just try a regular sappimg.nbh, but with goldcard too.
Click to expand...
Click to collapse
Looking through here for HTC RUU roms I seem to keep geeting dragged to the hero and WinMob forums which I dont think I should be. Where exactly would I find this?
My ideas are..
Find a rom of higher version that is rooted see if it works.
Find an older 1.5 build (which is proving hard) and go from there
Try and flash the rooted fender donut over it and see the results.
My main problem with this is, I dont think its able to be downgraded past 1.6.. Just like newer PSP's cant be downgraded to 1.5

After formatiing my 2gb sandisk (which may be the problem) now when using the 98mb SAPPIMG.zip I get "Main version is older" instead of "Device id failed"
Is this a good sign to on the right track? Im going to try the 62mb SappIMG.zip from amon ra's tut as soon as its done downloading and see if theres a difference.
Now.. what does main version is older mean? The firmware or the spl/radio. if so... is there a newer version i can use/or substitute a file for the Sappimg.nbh to just install a higher version rom.
Man.. The G1 is so much easier to do all this with lol

YEEEEES. Ok. I freaking fracking diddley did it. OMG i was sooo scared.
Wooo So happy now.
I unable to update my OP and thread title if a mod can help me with that.
If noone minds I am going to post my first ever tutorial on something. this was a real pain but I am up and running on Amon ras latest rom for now. On to the recovery....
EDIT-- Got a fully functioning Manups 2.1 1.5 going. THEBLUECOAT if you want to know how to do it PM me... Otherwise give me about an hour or so and I will have a full tut posted
AHHH.. EVEN worse.. I noticed now that it says I have a 32b board NOOOO
EDIT2- Such a dumbass I didnt make a backup of the orignal. Poop.. I liked the boot image and music apps. I just wish I could figure out why all roms so far dont recognize the touch screen as being there and want me to use the track ball. Even power button has 1 option Power off lol
UMMM touch screen not working. What didnt I do?

How do I get my SDCARD to not show up under logical, its under logical but the drive says "removable disk" all I have are phones to use, would this not be possible or would I need a driver replacement

thebluecoat said:
How do I get my SDCARD to not show up under logical, its under logical but the drive says "removable disk" all I have are phones to use, would this not be possible or would I need a driver replacement
Click to expand...
Click to collapse
you HAVE to use a card reader. thats where your problem has been. You have to use a card reader so that it sees the reader AND the card seperatly. So in hex, you dont see Logical drive then a row and then Physical and a row?
Im not pissed... I had the 2010 eng spl... trying to flash roms. No rom would use touch screen. so started over and ened up with a 32 b board now and a perfected spl again.... lol Argh... trying through it again now.

crypysmoker said:
you HAVE to use a card reader. thats where your problem has been. You have to use a card reader so that it sees the reader AND the card seperatly. So in hex, you dont see Logical drive then a row and then Physical and a row?
Im not pissed... I had the 2010 eng spl... trying to flash roms. No rom would use touch screen. so started over and ened up with a 32 b board now and a perfected spl again.... lol Argh... trying through it again now.
Click to expand...
Click to collapse
Ok, so how did you get the spl changed? and what did you flash that was 32b?

chrys9989 said:
Ok, so how did you get the spl changed? and what did you flash that was 32b?
Click to expand...
Click to collapse
I used Amen ras newest Fixed spl fix 1.33.2010, made my gold card, renamed that file to SAPPIMG.zip, went into Hboot and it flashed without a problem.
I then rebooted into Hboot seeing the new Info.. Didnt look at the 32a/32b part yet so not sure if it happened there.
It then rebooted into whatever rom that file came with (look for Amen ras Fixed spl thread) the rom came up, with no tocu screen. only the track ball worked.
I rebooted and stupidly jumped right into flashing a couple of the new clair builds from king and.. the othe rguy lol. neither had touch support. I then went back to update to manups newest and used the 32a port file, and no touch screen...
I then rebooted and flashed the amen ra rom and rebooted into a Mytouch boot loop... went into Hboot and had a perfected spl and S-on. ARGH.
Just started from scratch again. Im really wondering why i loose touch screen support and why in the hell it say 32b now

[HOW-TO] Haykuro SPL, Danger SPL, Death SPL FOR DREAM/G1

***MOD EDIT***
PLEASE READ THIS THREAD FOR UP TO DATE INFORMATION : http://forum.xda-developers.com/showthread.php?t=655097
***O.P. EDIT***
The link above does contain some more detailed information but the guide below has yet to cause a brick.
IF YOU PLAN TO FLASH THIS SPL PLEASE READ THIS WHOLE POST
This is for the Dream/G1 ONLY. If you have a Sapphire/MT3G this SPL is not needed.
If you have no idea what a SPL is or you are looking for info on other SPLs please read this page http://code.google.com/p/android-roms/wiki/SPL
Let me start off by saying that I have nothing to do with the actual development of the SPL. I also take no responsibility if you do decide to flash this SPL and brick your phone. That being said I decided to create a "How To" for the SPL for the simple fact that I would have switched to it long ago if I knew how easy and safe it was.
The SPL that you need for many of the new Eclair ROMs along with Hero ROMs and some Donut ROMs like Super D is a special SPL created by Haykuro that basically gives you more space to flash larger ROMs. When Haykuro first released the SPL there were reports of people bricking their phones. It turned out that the reason for the SPL causing a brick was because the SPL needed to be flashed over the latest radio and requires a PVT board. If the SPL is flashed over a radio version prior to "2.22.19.26I" or on a DVT board it will cause a brick. After people heard about this SPL causing bricks it became known as the Danger or Death SPL because of the danger that it can cause death to a G1.
A lot of people including my self were very worried about flashing the SPL in fear of a bricked phone. The result being many people not wanting to flash certain ROMs because they do not want to brick their phone. Some devs have actually changed their ROMs just to make them small enough to flash with out the Danger SPL so that more people will use their ROM.
Well if you are reading this and you don't have the Danger SPL because of the fear of a brick well then don't worry its ok to be scared but this "How To" will get you through it safe and sound.
IMPORTANT: Before going any further make sure that you have PVT board. You can do this by rebooting your phone and holding the camera button. The first line should say "PVT" if you see "DVT" then DO NOT flash this because odds are you will get a brick but If it says "PVT" then you are good to go.
First you are going to need to download the latest radio and the SPL. both can be found here http://code.google.com/p/sapphire-port-dream/ There is also a new radio that is compatible that can be found here http://forum.xda-developers.com/showthread.php?t=640535
Prior to starting the installation process please make sure that your battery has a good charge. Also DO NOT pull your battery out at anytime during the installation process. I know it seems like common sense but I read a thread where someone had pulled their battery in the middle of the installation process and they ended up with a brick.
Now that all that's out of the way lets get started!
1. Copy "ota-radio-2_22_19_26I.zip" or "G1-radio-2_22_23_02.zip" and "spl-signed.zip" onto the root of your SD card.
2. Reboot into recovery. I suggest using the RA-dream recovery you can download it here http://forum.xda-developers.com/showthread.php?t=566669
3. Wipe your phone "factory data reset" (this step isnt really necessary since your phone is wiped after flashing the SPL but I always like to wipe before flashing anything)
DO NOT SKIP THIS NEXT STEP OR YOU WILL BRICK YOUR PHONE
You must have the latest radio "2_22_19_26I" or "2_22_23_02" to flash this SPL if you already have the latest radio you should not have to flash it again but it will not hurt if you do flash it again. When in doubt flash it anyway.
4. Flash the Radio "ota-radio-2_22_19_26I.zip" or "G1-radio-2_22_23_02.zip" it will install and then it will ask you to reboot to finish the installation, so reboot, it will then finish installing and then reboot back into recovery.
5. Flash the SPL "spl-signed.zip" it will install and then ask you to reboot to finish the installation, so reboot, it will then finish installing and reboot into recovery so you can flash your ROM
A simple way to make sure that the SPL flashed correctly is when you reboot to the boot loader screen by holding the camera button you will see HBOOT-1.33.2005. You can also see that it flashed correctly by checking your system size it will now be 89mb a very easy was to check this is with the My Account app available in the Market.

Great idea to post this again, since so many people are asking about it.
I flashed mine way back when Haykuro first posted it, and I seem to remember that you had to have a PVT board as well. Is this still the case? I can't remember whether or not anyone found out otherwise.

kathi17 said:
Great idea to post this again, since so many people are asking about it.
I flashed mine way back when Haykuro first posted it, and I seem to remember that you had to have a PVT board as well. Is this still the case? I can't remember whether or not anyone found out otherwise.
Click to expand...
Click to collapse
PVT = a must have.
Also forgot to mention that when you reboot after flashing the SPL, you have to reboot with Home+Back

kathi17 said:
Great idea to post this again, since so many people are asking about it.
I flashed mine way back when Haykuro first posted it, and I seem to remember that you had to have a PVT board as well. Is this still the case? I can't remember whether or not anyone found out otherwise.
Click to expand...
Click to collapse
Yeah thats a big reason I decided to post this, so many ROMs now say they require Death/Danger SPL and only a couple actually provide a link or some type of simple instructions. I figure with a dedicated "How To" we can eliminate questions about the SPL in ROM threads and make people feel a little more comfortable with flashing it. I dont believe anyone actually tested it without a PVT board. I havent even seen anyone one here that doesnt have PVT board. Just in case though I will edit the OP, thanks for remembering that because I completely forgot that it has only been tested on a PVT board as far as I know.

also you should include how to know which spl you have. i was about to flash the danger spl again because i forgot i already had it

xsnipuhx said:
PVT = a must have.
Also forgot to mention that when you reboot after flashing the SPL, you have to reboot with Home+Back
Click to expand...
Click to collapse
I rebooted with the reboot option in the recovery with out an issue.

Joe333x said:
I dont believe anyone actually tested it without a PVT board. I havent even seen anyone one here that doesnt have PVT board. Just in case though I will edit the OP, thanks for remembering that because I completely forgot that it has only been tested on a PVT board as far as I know.
Click to expand...
Click to collapse
If I remember right, some people flashed the radio first, and still bricked, and the difference was that they didn't have a PVT board.
Maybe you should also put in big red letters at the beginning about flashing the radio first. You can tell by reading all the questions on here that at least half of the people don't read the instructions, they just flash away in any order they feel like flashing!

kathi17 said:
If I remember right, some people flashed the radio first, and still bricked, and the difference was that they didn't have a PVT board.
Maybe you should also put in big red letters at the beginning about flashing the radio first. You can tell by reading all the questions on here that at least half of the people don't read the instructions, they just flash away in any order they feel like flashing!
Click to expand...
Click to collapse
Very true red letter warning has been added.
Please if anyone has suggestions for this "How To". Dont hesitate to post. I made this to help people out so if you have an idea that will help let me know.

When I first got a G1 as a test phone I tried to flash the radio/spl and it failed repeatedly. I'll try it again as I have had the phone for awhile and I want to try some of the newer ROMs
EDIT: Still getting fails on the radio flash.
it says:
Install from sdcard
Finding update package
Opening update package
E: Can't open /sdcard/ota-radio-2_22_19_26I.zip (bad)
Installation aborted
could it be my sd card?

It looks good now!
I remembered right:
Ok if u press the camera button + power to power the phone up and if u see "PVT" then ur good to go if u see "DVT-1 or 2" then u should defenetly not flash cuz almost every1 with dvt gets "bricked".
Click to expand...
Click to collapse
form this thread:
http://forum.xda-developers.com/showthread.php?t=517593&page=9

So, where can I get the Haykuro/ Death SPL ? Do it same way like Danger SPL ?

MaDaFGG said:
So, where can I get the Haykuro/ Death SPL ? Do it same way like Danger SPL ?
Click to expand...
Click to collapse
The Haykuro/Death SPL IS the Danger SPL.

MaDaFGG said:
So, where can I get the Haykuro/ Death SPL ? Do it same way like Danger SPL ?
Click to expand...
Click to collapse
it is called Haykuro SP: .2005 you guys have to get your facts straight.Haykuro is the person that ported the Magic's SPL to the Dream to allow larger roms to be installed.
Both the Radio & SPL are here:
http://code.google.com/p/sapphire-port-dream/

So does SPL flashing only apply to G1's? I have a mt3g. I can safely flash any rom w/o flashing an SPL first?

kathi17 said:
It looks good now!
I remembered right:
form this thread:
http://forum.xda-developers.com/showthread.php?t=517593&page=9
Click to expand...
Click to collapse
Thank for finding that I just edited it again

I'm snowed in tonight, so I'm gonna try this out. I hope everything I need to know is here. If I do a Nandroid+EXT backup before, will I be able to Nandroid Restore after the SPL upgrade?

So I tried to flash the spl yesterday cuz i wanted to try out some new roms, but I kept on getting errors everytime I flashed the spl and it aborted. So after a while i just gave up and went back to cyanogen. Does anybody know why there would be errors when installing the spl. and yes I did flash the radio first.

rizocreations said:
So does SPL flashing only apply to G1's? I have a mt3g. I can safely flash any rom w/o flashing an SPL first?
Click to expand...
Click to collapse
That is correct. This SPL actually is the one that if for your mt3g but edited for the G1 so that it can flash larger ROMs.

rizocreations said:
So does SPL flashing only apply to G1's? I have a mt3g. I can safely flash any rom w/o flashing an SPL first?
Click to expand...
Click to collapse
Its called Sapphire to dream port for a reason.You can use the .2004 or .2010 SPL or whatever its called instead.

If I already have the correct radio, do I have to re-flash the radio again before flashing the SPL?
The reason I am asking is that I have 2 G1's.. the first I unknowingly did everything right and have the danger SPL without any problems. When I went to root the second one a couple of months later, I bricked it even though I thought I did everything right. Now my "new" phone has the correct radio, but only the engineer's SPL and I want to try some of the newer ROMs but am afraid to brick the phone again.
Thanks