I have just read on this forum many people with my identical problem: i did upgrade to my gmsart i64 with the rom of i128 (only because i didn't know that my phone is a i64!).
Many of us made a lot of test to resolve this problem (now the phone dont' start and if i repeat the upgrade with the original firmware, during the installation i have this error: FORMAT DSK2 ---FAIL)
I would know, if you are so kind, if you have a solution.
Have i to put in the trash my phone??
THANKS A LOT FOR ALL!
I dont think so,you just need to do more reading in this forum.Dont be sad,man.
Nobody have a suggest?
Is there a method to format DSK2?
Thnaks
LongJohn, http://forum.xda-developers.com/showthread.php?t=273825&page=36
you did the same mistake as many others, so the only solution is to send your phone for repair to Gigabyte or some service centre.
yes...
I read that thread!
In the next day, i'll bring my phone to Gigabyte Center in Italy.
thanks for all
help
LongJohn said:
yes...
I read that thread!
In the next day, i'll bring my phone to Gigabyte Center in Italy.
thanks for all
Click to expand...
Click to collapse
Can u share with me how does the service centre resolve your format dsk2 problem please? as I had trhe same issue but no service centre in singapore.
Ok!
In the next day I'll bring the phone to assistant center.
I'll tell you about the problem.
Thanks.
@VincTAN:
did you do any type of test to solve the problem?
Do you have FORMAT DSK2 FAIL problem also?
A question: after blue block the FORMAT procedure goes on FAILS??
Just to know.
thanks.
LongJohn said:
@VincTAN:
did you do any type of test to solve the problem?
Do you have FORMAT DSK2 FAIL problem also?
A question: after blue block the FORMAT procedure goes on FAILS??
Just to know.
thanks.
Click to expand...
Click to collapse
Hi LongJohn,
Yes, after checking the image successfully and the screen display FORMAT DSK2, just run about 2 BLUE bar then stopped, and show FAIL.
Please help to check is there any software can refresh the ROM so that i do not need to send it back to Taiwan.
Yes.....just the same my problem! Only two blue bar and...FAIL....
Even I found a sw to refresh the rom...but nothing...now...
I hope to say you good news soon.
youre in a good position guys my device never turns on after a lot of problem
Hi!
My PDA is on a Assistant Center (www.wsc.net in Italy).
I'm waiting....but they told me that there is a ROM "burned"....
:|
It's can be possible.....They want 80euro to repair the PDA....
I'll say you news as soon as....
@cybertronics: when the firmware is wrong, the charger don't load the battery!
Even the light is on when the charger connector is plug on.
Hi!
I'm wainting yet my gsmart from the official Italian Service Center (www.wsc.net), but I have just had good notice.
My gsmart is repaired!
They replaced the Matherboard (this is what they told me).
When I'll have here the phone, I'll notice you about the last news and informations.
Bye...
LongJohn said:
Hi!
I'm wainting yet my gsmart from the official Italian Service Center (www.wsc.net), but I have just had good notice.
My gsmart is repaired!
Click to expand...
Click to collapse
Great news, happy for you!
Thanks!
gsmart i -> gsmart i128
I made the same mistake and I had to take my bricked phone to assistance in italy.
They repaired it totally free in 3 weeks and gave me back the gsmart i with a new i128 mother board inside!
So... now I am happy of the wrong updating procedure I made!
thank you Gigabyte!
ahah lucky
Even I, after 4 weeks of assistance, now i have the PDA repaired and with a wonderful mainboard of gsmart i128! And all this...free!!
Thanks a lot GIGABYTE!
I have a Smart i 64 died because of wrong when i tried upgrade rom ( rom upgrade of g smart i128),i have read relating topics of forum ,i see that can not repair by myself.
I wonder to get your advice for my GIGABYTE G-smart i64.( I am Vietnamese).
waiting for your's.
Thank a lot!!!
Hello,
I just started using HTC Tytn II and when I was out of UK, I needed to unlock the phone from Orange to enable me using it. I then sent it to a shop via a friend. Then I just realised when it got back to me, the software is a bit different - on turning the phone on it reads "HTC touch dual".
I suspect the person from the shop put the touch software in my Tytn.
So that was fine. I do not really have problem with it, in fact i get used to the function already. but i have problem to have my gps working. i could get the map on the phone, but the receiver doesnt work.
I wonder if anybody could help me, in plain term (i am not good with gadgets, softwares etc) direct me towards solving this problem.
do i need to change it back to the original software,and if so, how?
or how can i make my gps working?
thank you very much in advance =)
Start here:
http://forum.xda-developers.com/showthread.php?t=433835
This isn't rocket science you can do it.
I do not think that this is a Rom issue, but a Radio issue, if you can check what radio you are using and make sure it matches the Rom, the instructions are there in the link that Fifa provided..
Hi,
I'm new to this forum and i hope somebody will be able to help me.
I have an ACER N3, old model i know, but a great work horse. I use it for my courier business as it provides all my delivery notes etc with this great software.
HOWEVER, for some reason and i honestly cannot fathom it, my ACER has completley lost everything, so much so that Windows mobile 5 start even come up any more. The only thing i see now is the white screen with the blue pda picture.
I have hard reset it several time each time with no success and getting no further than the white screen.
I hope (without causing offence) this has happend to someone before who can give me an answer of how to reinstall Windows Mobile 5 (the rest of the stuff i lost i can retrieve)
I have searched through everything i received when i bought it and there is no cd or anything. Apparently i only need the rom image of WM5 and it should work again or if ian get some kind of windows mobile 5 updater, maybe this will work?
I hope someone can help.
Thanks in adavance
Chris
i would connect it to usb and run the firmware install i'm sure acer got on their support page
Thanks for your quick respnse. However i have looked all over the acer website and the only thing they have on their support site is a USB driver update.
I hope there is a way of resolving this cause i could really do with not having to buy a new new PDA.
Thanks again for your help.
acer removed it from their ftp.... i was also searchin for it to reflash my rom...
finally was able to find it.. thanks to google....
Hi,
I need your suggestions. I have a T Mobile MDA Vario IV whose digitizer has given up on me. It basically doesnt register the correct input and sometimes it doesnt register anything at all. I have tried all the possible software tricks on it, to no avail.
The phone gave up on me after the first time I installed WM6.5 from NRG.
I cant replace the hardware as it is not available locally in Riyadh and any other way would be too expensive.
So now, I still want to make use of this phone which I used for hardly 3 months. Any suggestions other than using to assault HTC engineers.
OK, I have looked through the forum and threads but cannot yet see my solution so I need help!
Problem.... I have a second hand HTC Orbit 2 running Windows but .... it has car ID and password log-on that I think is a TOM TOM addition and I cannot get passed it and I need to get rid of it....if possible!
I have tried all the listed hard re-sets and they do not work.
If someone suggest re-installing Windows and deleting everything that would be fine by me, but I will need help doing that!
I would just prefer to get rid of the log-on. It is not my main phone it is just a project, I have a XDA Orbit (nice reliable phone)
So lets get the ball rolling ... can you help me?