HTC Touch Hd external SD card reader - General Questions and Answers

Hello there,
i´m new here, an i need your help.
is possible to have an external sd or CF card reader connected by USB port on the HTC touch HD?
many thanks

No.
The Usb Host function which is on the cpu is NOT integrated in the OS (Win Mobile 6.1)
Greets !

unfortunately all these new devices don't even supply the power needed to connect anything to the USB port

Related

Connecting an XDAII to digital cameras, PC's, etc

Is it possible to connect an XDAII t a digital camera to allow me to download images on the move? Or how about connecting to any PC using a USB cable to transfer files, images, etc? I read somewhere theat the XDAII chipset doesn't support this type of connection, is this correct?
No, it's not possible. For any PDA (and our xda, too) the chipset is configured as a slave usb which doesn't allow you to use "normal" usb functions. thats also the reason because activesync exists.
You have a digital camera already in your xda 2, you can transfer files to any pc as long as activesync is installed, just click explore and you can drag and drop. Alernatively you can use a card reader, this will plug into any usb enable pc and allow transferring of files both ways.
I do not think that you can connect it bu usb - probably you need special drivers for it...
99% of htc devices don't support usb host
and can as such only be used by a host
not use other usb devices itself
some things are possible...
With the software WM5torage you can hook up your Hima or any other HTC device to any PC with no Activesync installed and it behaves like any other mass storage device. So if your camera has SD cards you can easily transfer pictures.
If you still use WM2003 on your Hima you can use accessory called Backpack to read CF cards or use a CF to any other card converter.
You can use IR or Bluetooth for wireless control of robots and other devices.
There is also RS232 on the Hima connector.

PC <-> PDA USB transfer rate?

Just a general question. Seems that my HTC Prophet transfers data to the SD card much slower than using a card reader. I guess it's USB 1.1.. Is there any device that can transfer as fast as the card allows? Hopefully HTC P3600i ?
sd interface on pda dont use usb as few pda can usb host
there is a native sd interface in the cpu's
which is kinda slow compared to pc sdcard readers
not sure if P3600i will help much

Plug external USB devices on HTC S730?

Hi,
I was wondering if it is possible to plug external USB devices on the HTC S730 (with adapter). E.g. external hard drive or cardreader?
Would be amazing
I have not seen a program yet which can do this.
The Fujitsu Siemens Pocket Loox T830 was able to do that.
You were able to switch between client / host in the USB settings.
But I think if this function really exists, then it is rather hardware dependend than software dependend.
Anyways, maybe someone has an USB adapter to test this for us
This is interesting:
http://en.wikipedia.org/wiki/HTC_ExtUSB

Raphael - USB Host?

I am wondering whether or not the Raphael has USB Host functionality? I read this on some internet sites, but searching the Wiki and other avaliable informative websites couldn't bring light to this issue. I know that HTCs ExtUSB only is a proprietary connector, enhancing the USB Port with audio and video functionality. This is not what I'm talking about!
Host USB allows devices to act as an USB host (like a computer) and as such access USB-Devices like harddrives or USB sticks, which is more than convinient. As some other Pocket PC have it, I'm hoping deeply my future playmate has it also.
Maybe some of the lucky users could verify?
Thanks!
Doesn't look like it'll have any host facility no. The only HTC device ive seen with host are the bigger HTC Advantage's which have a normal USB port. I dont think the Qualcomm chipset offers USB host either.
This would be a nice thing to have...
I am still owner of a PocketLoox 720 which is capable of accessing USB sticks and USB HD.
It'd be nice. But I guess it would eat the battery.
I think I saw somewhere a USB bluetooth thingy that enables you to read USB sticks via Bluetooth.
well to be precise both the diamond and raphael have some interesting host ability - in SPL you can set usb host to read NBH file off usb. however you need the right adapter cable, so I haven't tried that yet on the diamond (and no raphael yet).
cmonex said:
well to be precise both the diamond and raphael have some interesting host ability - in SPL you can set usb host to read NBH file off usb. however you need the right adapter cable, so I haven't tried that yet on the diamond (and no raphael yet).
Click to expand...
Click to collapse
What an interesting feature... Maybe it's for service centres to unbrick warranty returns easily?
Rory
cmonex said:
well to be precise both the diamond and raphael have some interesting host ability - in SPL you can set usb host to read NBH file off usb. however you need the right adapter cable, so I haven't tried that yet on the diamond (and no raphael yet).
Click to expand...
Click to collapse
Have you tried with the Athena USB host cable?
Pantaloonie said:
Have you tried with the Athena USB host cable?
Click to expand...
Click to collapse
oh hmm. does that cable plug in the miniusb port of the athena?
cmonex said:
oh hmm. does that cable plug in the miniusb port of the athena?
Click to expand...
Click to collapse
Yes it does, I was hoping it would work with the Diamond and Raphael.
Pantaloonie said:
Yes it does, I was hoping it would work with the Diamond and Raphael.
Click to expand...
Click to collapse
mm, thought it plugged in the other port on the athena...because it also handles vga out (the 4 in 1 cable). and this other port (beside the miniusb sync port) has the icons vga out and usb host.
that is clearly not the same socket as the miniusb (i.e. the sync port).
the diamond & raphael unfortunately only have this miniusb (which is for the sync on athena).
You're right - It's been so long since I used the USB host on the Athena I'd forgotten which port it uses.
Back to the drawing board on that one I guess.
Pantaloonie said:
You're right - It's been so long since I used the USB host on the Athena I'd forgotten which port it uses.
Back to the drawing board on that one I guess.
Click to expand...
Click to collapse
yeah, I also have the 4 in 1 somewhere in the drawer
I only got it to have all cool accessories for my Athena.
anyway, I'll update the thread if I find out more about the cable needed for diamond/raphael
I read in the Diamond service manual (foeund somewhere on the forum here) about using an USB SD-card reader on the sync port on the Diamond. It is used when servicing the phone to upload firmware and test software to the internal storage.
On the picture it looks just like a normal sd card reader that is plugged into a standard USB port on one of the ends on the cable. it is a Y cable where one end is power, one USB and one mini usb to plug in the phone.
I am just doing some tests on this now. I made a usb cable with mini usb in one end and normal usb in the other end. On the on ememstick I have here in the office nothing happens.I will continue to look into this matter.
holy moses. I got something working here!!!!!!!!!!!!!
I had to rebuild my cable a little bit here to get this working.
The new external USB port is now powered from a 5Volts source. I have cut the 5 volts connection between my Diamond and my USB memory.
I am using a standard USB flash memory which i got at some commercial stuff long time ago.
I formatted the USB stick to FAT32 on my computer first.
The thing I tried was:
downloade a custom firmware.
copied the xxx.nbh file to the flash
renamed it to "DIAMIMG.NBH" Capital letters!!
Started up the phone holding VOLUME DOWN and RIGHT button down while giving the power button a short push.
It fired up the Olimex boot scene and asked me to push power button to confirm flashing.
After that it flashed my phone for about 10 minutes (from the USB flash memory)
So there is NO DOUBT, the Diamond has USB master capabilities!!!!!!!!!!!!!!!
When I am in file explorer I still can't get in contact with the memory.
Anyone that has the USB drivers from som larger HTC device????
Can anyone try to flash a phone with an un signed firmware or a firmware from wrong region on a phone that has the original bootloader using this method?
Does anyone know how to use external memory by usb hosting
zeb crs said:
holy moses. I got something working here!!!!!!!!!!!!!
I had to rebuild my cable a little bit here to get this working.
The new external USB port is now powered from a 5Volts source. I have cut the 5 volts connection between my Diamond and my USB memory.
I am using a standard USB flash memory which i got at some commercial stuff long time ago.
I formatted the USB stick to FAT32 on my computer first.
The thing I tried was:
downloade a custom firmware.
copied the xxx.nbh file to the flash
renamed it to "DIAMIMG.NBH" Capital letters!!
Started up the phone holding VOLUME DOWN and RIGHT button down while giving the power button a short push.
It fired up the Olimex boot scene and asked me to push power button to confirm flashing.
After that it flashed my phone for about 10 minutes (from the USB flash memory)
So there is NO DOUBT, the Diamond has USB master capabilities!!!!!!!!!!!!!!!
When I am in file explorer I still can't get in contact with the memory.
Anyone that has the USB drivers from som larger HTC device????
Can anyone try to flash a phone with an un signed firmware or a firmware from wrong region on a phone that has the original bootloader using this method?
Click to expand...
Click to collapse
heh, you were faster at building the cable congrats.
btw, what special modifications did you need to make? just the 5V source?
anyway, this just confirms what i found in bootloader disassembly then.
not sure on the availability of usb host drivers. maybe we will need to implement it ourselves
and sorry, but i do not understand the question about flashing unsigned stuff. the stock bootloader will not accept unsigned NBH, no matter where it comes from, sorry to disappoint you.
EDIT: I downloaded the service manual now, thanks. wasn't aware this was out in the open
anyway, the text mentions you must plug in AC power for the USB host. what a shame.
zeb crs said:
When I am in file explorer I still can't get in contact with the memory.
Anyone that has the USB drivers from som larger HTC device????
Click to expand...
Click to collapse
Just an idea, have you tried to start WM5torage on Diamond ?
It lists the MovieNAND and the system partition. OK, you can't take access to it, but maybe WM5torage recognizes the USB stick from OS.
If it does, maybe a modified version of WM5torage can do these job ?
For short test download here:
WM5torage
Ok, WM5torage isn't the right way to test the access from OS, because it needs at last a running driver.
Qualcomm was running Oxford Semiconductor solutions, maybe the integrated USB OTG is a license from this company ?
@cmonex:
Is it possible to adapt the integrated bootloader driver to WM ?
USB drive is HTC supported
I just read through the US user manual and Section 1.13 Using you Device as a USB Drive. http://member.america.htc.com/downl...al/HTC_Touch_Pro/HTC_Touch_Pro_English_UM.pdf
Quote:
To easily carry media and other files with you, you can use your device’s storage
card as a USB flash drive. Touch Start > Settings > Connections tab > USB to PC
and then select Disk Drive mode. This allows you to copy files from your computer
to the device’s storage card and vice versa faster.
Note You need to have a storage card installed on your device to be able to use your device
as a disk drive.
When Disk Drive mode is used:
You will not be able to use your device to access files from the storage card
or run applications that are installed on the storage card while the device is
connected to your PC.
Your PC will only connect to the device’s storage card. When you access your
device from the PC, you will only see the contents of the device’s storage card.
Remember to change back to ActiveSync mode when you need to synchronize
data between your device and your PC.
USB Host is different.
Mechanicaldan said:
I just read through the US user manual and Section 1.13 Using you Device as a USB Drive. http://member.america.htc.com/downl...al/HTC_Touch_Pro/HTC_Touch_Pro_English_UM.pdf
Quote:
To easily carry media and other files with you, you can use your device’s storage
card as a USB flash drive. Touch Start > Settings > Connections tab > USB to PC
and then select Disk Drive mode. This allows you to copy files from your computer
to the device’s storage card and vice versa faster.
Note You need to have a storage card installed on your device to be able to use your device
as a disk drive.
When Disk Drive mode is used:
You will not be able to use your device to access files from the storage card
or run applications that are installed on the storage card while the device is
connected to your PC.
Your PC will only connect to the device’s storage card. When you access your
device from the PC, you will only see the contents of the device’s storage card.
Remember to change back to ActiveSync mode when you need to synchronize
data between your device and your PC.
Click to expand...
Click to collapse
Sorry to dissapoint you, but this is just the other way arround. This enables you to use your phone as a flash drive from a PC. In this thread they want to access a flash drive (USB stick/HD etc) from their phone

external device

Hi
Does anyone try to connect an external device (like an portable hard disk or an flash memory stick) to diamond?
Hi.
This question has been answered a number of times...
The diamond does not provide any USB Host capability. Thus, it's not possible to attach external devices to its ExtUSB port.
Some attempts have been done using special 'home made' cables, but today to no avail.
Cheers

Categories

Resources