Related
I just noticed that the today items messaging and device lock disappeared from my today screen on my Atom. I would like to get them back. anybody know how? The don't show up in start>setting>today>items however, they are visible in the registery (and enabled) and visible with memmaid.
Please let me know if there is an other solution than to hrad reset my device.
Thanks in advance
there are limits of how many today items you can have
forgot how many
but the today item list is limited to 13
if you remove some in the reg the ones you are missing will show up
in today items
Hi Rul,
The other thing to check in your registry is the value of the Reg_DWord called "Order" for each of your plug-ins. Occassionally my plugins will play hide and seek if I've installed a new one and its default order number clashes with any of the other plugins. They do however still show up in the today settings. I'll post my reg settings so you can check yours are ok and then double chekc that the dll's for each are where they are supposed to be.
Good luck - Mallow1
Oops, forgot to mention that for me I have the Device Lock disabled anyway (so just ref to the other reg settings) as I have it in the sys tray instread to save Today Screen space, thanks to an excellent cab writen by armstrom http://buzzdev.net/component/option,com_simpleboard/Itemid,59/func,view/catid,27/id,17285/#17285 which uses the underlying Device Lock but via an exe which you can then assign to the sys tray using any of the tray launcher programs out there.
Regards - Mallow1
PS I swapped the icon out to be the same as Device Lock (armstrom's exe uses a different one if you happen to go down this route).
Thanks for you reply's.
With the messaging and device lock items I have 13 today items. (now 11 since these two don't show up anymore).
I have checked the Reg_DWord called "Order" and there are no clashes...
Any other solution?
Thanks for the device lock thingy in the sys tray, very useful.
What have you done differently since the last time you could see your missing items? Loaded anything else? Reflashed etc? It may help us track down what has gone wrong if Rudegar's suggestion didn't work and you have no clashes when you checked my suggestion.
Of all your 13 items do you run/ wish to run all of them or are some disabled (and unlikely to be used again). If some are redundnat, did you try Rudegar's suggestion of removing them from the registry?
On a side note, and without wishing to get side tracked or complicate your issue have you tried "MoreTodays" to see if that helps at all if all your 13 items are "must haves" but you are only seeing 11. It allows you to have multiple Today Screens each showing different plug ins. Depending upon how it works it may allow for >11 (or >=13) whatever the formal limit is, plugins to operate. See http://www.jgui.net/moretodays/index.html
Regards - Mallow1
Some of the today Items are disabled, in fact 5 of the 13. So I deleted a couple of them. Still not showing ion my todayscreen.
Well, as far as I know I have installed some programs, don't know exactly which I have installed, so that's not really helping.
I tried the program you've suggested and I can select messaging and device lock. But they still don't show up on my todayscreen.
I think I will have to learn to live with it, which is not that hard though, or I will have to hard reset my device.
Thanks for your help and suggestions.
After you deleted some from your registry did you try a simple soft reset (rather than having to resort to the horror of a hard one)?
yep, did that after every change I've made. No results though.
Sounds basic but have you checked that the dll files concerned are still present. If they are present it may be that a path is wrong in the registry (try adding an explicit path/double checking path matches location), else we can resort to simply replacing them just in case they have been corrupted.
On that last point did you try the Device Lock exe I highlighted. If that works it means that the underlying device lock dll works too (as the exe uses it rather than emulates it) and it is therefore a Today Screen issue we are facing not a corrupted dll.
Now that you removed your unwanted dll refs from the registry, how many Today Items are there left there? I have at the back of my mind that there is also an upper limit to the number of resources WM can handle at any one time (think I recall this causing problems with Wisbar not being able to skin a few things simply because too much was already loaded and the required dll file scould therfore not be used).... but we can save broadening the issues until we've eliminated the simpler more direct ones.
Regards - Mallow1
PS FYI I have 9 Today items in my registry and 7 that are enabled. If you delete your unused 5 items out of 13 that would at least bring you down to within the same range loaded in my registry and we could eliminate the "number in registry" from the list of possible issues.
Ooh, another quick one to try (I use it when I have items checked in the Today settings that have failled to show in the Today Screen), is try running this little app which simply refreshesd the Today Screen. See if your missing items appear afterwards.
Regards - Mallow1
Mallow1 said:
Oops, forgot to mention that for me I have the Device Lock disabled anyway (so just ref to the other reg settings) as I have it in the sys tray instread to save Today Screen space, thanks to an excellent cab writen by armstrom http://buzzdev.net/component/option,com_simpleboard/Itemid,59/func,view/catid,27/id,17285/#17285 which uses the underlying Device Lock but via an exe which you can then assign to the sys tray using any of the tray launcher programs out there.
Regards - Mallow1
PS I swapped the icon out to be the same as Device Lock (armstrom's exe uses a different one if you happen to go down this route).
Click to expand...
Click to collapse
Hi, i love your today screen! Tidy but functional! Could you please tell me what apps/plugins etc you've got going on there?
Hi fuel925,
Thanks. There's something like 30-40 packages making up the entire screen and functionality. Rather than clutter this thread with an off topic reply I'll see what I can knock up and post in a separate thread to give you an insight and post a link here afterwards.
Regards - Mallow1
Hi fuel925,
Just follow the link...http://forum.xda-developers.com/viewtopic.php?t=46855&highlight=forgot+mention
Regards - Mallow1
Hi. Mallow1
I've tried everything, nothing is working. I rest my case. Thanks for your help anyway.
regards,
Rul
Hi Rul,
Sorry to hear that. I've heard that theAtom has had a chequered start. Sounds like hard reset time (and I did hear somewhere that since so many of the early Atoms were having problems that an updated ROM had been relased quite quickly post launch). If yours was an early one you may find searching or checking for the updated ROm and reflashing helps (I want to say I think I saw this with respect to Aussie Atoms but can't swerar to it).
Anyway. Good luck - Mallow1
When I got my Atom I imediately put the "leaked" ROM on it. So it is not the case of an old ROM or something.
I just noticed that it is not showing the smartdailing plugin from the Treo 700w I just installed on it. So I guess there is something seriously wrong with the today plugins.
Regards, Rul
Hi!
New to this forum and new to the wonderful world of Windows Mobile.
Coming from a palm-world where most things just tend to work, this has been somewhat of a reminder of the early Windows desktop days.
I'm having some issues (One of these issues made me choose this forum, if this was in error, I apologize in advance).
1. Active sync worked once, but never again.
It seems the mp3-files I added (251 of them), makes active sync just time-out in the media stage. I have not found a way to remove media from active sync either to confirm this. I cannot access settings since it times out with the sync. Edit: The media-row in the active-sync window also states that the installation has to be completed first. Which it already has.
2. Media player does not add files to library.
I do the file-search and it finds 251 files on the SD-card, makes a slight paus and finds 4 more files. Then it adds only those 4 files. accessing the storage card in the library and my music only produces an unexpected error. I have not tried to empty and reformat, or a lower file-count just yet. But to me this seems like a bug that not only scans the storage-card but also the device and then only adds what's on the device. What is added is 4 ring-tones.
3. A2DP...
Well, I read the instructions on the two threads dedicated to this, but it does me no good since I find no files in either of them. I am willing to host those files for you if needed by the way. I really want A2DP since I already got the Jabra BT-620s.
4. Not a real important one but, overclocking.
I ran the OMAP_TI_Overclock thingie, but absolutely nothing changes. Still 195 Mhz whatever I do. I find people have fall-backs in a few minutes or after reset, but this is immediate. The utility says it sets the clock and that the current clock has changed, but as soon as I go to the system-info it says 195. And starting the utility again it says it set as 180 (which according to the system obviously equals 195 ).
These are the current obstacles to overcome before I turn to media-control from the headset, and other more daily handling stuff that obviously already works fine (Voice-control, and contacts and stuff)
There was something more, but I forgot. I'll return to that. Now I'm off to the golf course hoping for some good advice to start pouring in...
Best Regards
Bo Eriksson
1. Buy a card-reader. They're cheap and save your nerves as AS 4.1 is EXTREMELY unstable comparing to 3.8 one
2. Dunno.
3. Try reading again. Works just fine
4. In the ABOUT info you'kk never see the change as it's not a monitor of CPU but the info contained like plain TXT. as for the program use action-set clock - and then action-exit. If you do load it before you turn Prophet off you'll see the clock is still in there
About #1:
Yes, I have several. More than I have computers actually, which is a lot!
Not that more helps in this case. I got my S200 Yesterday so I am really only starting out to get things going. This is just my initial small problems. I just find it frustrating that I cannot change what will be synced with Active sync until a sync is successfully completed, which is never. So We'll see how I solve that one...
About #4:
Is there a real system info utility around?
About #3:
I am sure it works fine. I just cannot find the needed files. They're nowhere around for download. At least not in the threads:
http://forum.xda-developers.com/viewtopic.php?t=43992&postdays=0&postorder=asc&start=225
And:
http://forum.xda-developers.com/viewtopic.php?p=275438#275438
So if you know where they are (Especially the one talked about in the first thread), please direct me towards them.
Best regards
Bo Eriksson
1. I just mean uploading thru AS WAS ALWAYS laggy and still is unles you do upload small files.
4. Why would you want one, you just see it working faster.
3. I attached both files zipped for you.
Ok, I got A2DP working now, Great, and thanks. I didn't realize the files only were visible while logged in , yup real newbie-alert .
And I installed Resco Explorer to do things more easily.
What remains is the problem with my Media library.
I cannot fathom what's going on. It's like this. I have 221 files on the storage card, and the system has 4 on the device itself. It scans both and lists 225 as found, then it takes a good 3 minutes adding files. Then it reports 4 files added. And only the library on my device shows anything (The four ringtones) trying to access the storage card library only results in an error.
Still, I can just click any of the files in the explorer and it plays perfectly (now in glorious wireless stereo!)... So there's nothing wrong with the card and the files. It's just the Library update thingy that fails me.
Best Regards
Bo Eriksson
I solved the Media Library thing.
I started deleting albums and doing new updates, but still no luck even down to one single MP3. So then I remembered something someone said in a thread somewhere about the MSMETADATA folder containing the library, so I simply removed it from the storage card and updated the library again. Voila! Now it works!
From now on I will only add a smaller number of files at a time, doing new library updates...
So now it's only the Active Sync problem remaining.
I just can't get it to work anymore. I tried reinstalling it late yesterday, but no luck...
Best Regards
Bo Eriksson
Hi everybody
Ive been around thousand of threads on xda-dev and couldn't find any official one for Anti-Virus. That's the main reason why I'm starting this new thread and also because Anti-Virus on Pocket PC are growing more and more. Actually we are not safe but we don't care until we get infected and that will be too late, with most of the time the only solution a hard reset.
Let's discuss and compare in this thread the different Anti-Virus SW available on the market today, and bring out positive/negative points based on our experience. It will be benifit for everybody ...
I know everyone hates Norton/Symantec but I was on the beta testing team for Norton Smartphone Security Premier Edition since day one and it is very friendly and easy to use.
http://www.symantec.com/home_homeoffice/beta/overview.jsp?pvid=nssp1beta
Actually I was using Symanter antivirus for handheld on my QTEK 2020i WM2003SE and that's true it is user friendly and worked fine, with virus definitions updates very ofently.
I was unable to install it on my HTC Athena WM6
Do you know is there is any version coming for WM6 Pumpiron?
I checked you link and it's different from what I used to have on my old device.
Ill download this beta and try it.
I'll let you know what I think about it, if it slow down the machine etc ...
It did not on mine and when I uninstalled it, it was gone...no traces..part of the beta testing. I did uninstall from my desktop, not my PPC
I am curios, how does this effect your device speed and performance?
What is the CPU and memory usage (in reality, not what stated on the site)?
I have Symantec on my XP PC and it sucks big time (does the job for the most part, but very slow and heavy).
eTrust came pre-installed on my Jamin, but that is an even bigger atrocity!
Another question - do they have a list for PPC viruses on their site like they do for PC ones?
The only PPC virus I heard of was a harmless proof of concept that could make files display a pop-up message and did not reproduce.
If real viruses for WM systems are already out there (I know its a only matter of time) I would be interested in reading up on them to know what I am facing.
Also, anyone actually caught a virus on a WM machine and can share the experience?
Here are my first impressions:
1 - The Startup time of my Athen after a soft reset has increased by around 20 sec, this because Symantec is loading on the startup.
2 - I didn't noticed a slow down during normal utilization of the device, but it's really early before concluding on that point because I need to try different applications.
3 - When I first connected to the Internet via WiFi, even the connection were established, could not load the pages having an error "page not found"
but after 15sec everything is back to normal and connections to Internet was not a problem at all.
4 - I just suffered a Freeze but not sure it is due to Symantec, because i've been suffering frequent daily freezes on my Athena since I upgraded to WM6.
But the freeze came this time while using the Antivirus SW
5 - The package is composed by an AntiVirus, a Firewall, a Norton Secure Folders utility and a Norton Tools utility.
6 - Also note that after finish installing it, it force you to set a pin code that you will have to enter everytime you soft reset your device. I tried to disable it but it won't let you do it
I'll give more details about the package in a different post after some testing
levenum said:
I am curios, how does this effect your device Another question - do they have a list for PPC viruses on their site like they do for PC ones?
Click to expand...
Click to collapse
You can check the list from the SW installed on the PPC
Just applied live update over WiFi and basically there are 5 in the list:
EICAR-TEST-FILE
WinCE.Duts.A
Backdoor.Brador.A
Trojan.Redbrowser.A!jar
MSIL.Cxover.A
Definitions : 04/06/07 ver 2.0
As promised, here is my feedback on the tools provided in the package:
1 - Norton Antivirus
Very friendly and easy to use, from the menu u can access the options for the Antivirus, the Scans, the AntiSpam, Updates and Proxy config. You can also access the quanrantined files, the activity log and the virus definitions list. Manual scan and automatic scan can be performed.
2 - Norton Firewall
I didn't really understood how we use the Firewall function. Basically when you start it you have a tab showing the security level. It is have different security levels for World (the highest), Office, Home and Open Sapce Networks (the lowest). Also you can not modify them at all. You can access a second tab called Events by severity in last and a third tab "Event list" which show in details all the events that happened on your device, like soft reset, login success .... very weird as we can not reset this list, also we can not change any parameter in the Norton Firewall, everything is set by default
3 - Norton Secure Folders
from what I guessed, this utility allow you to choose folders on your device and set them as secure. I don't know what it does exactly but I think it should encrypt the data inside the folder so it's protected in case you have been attacked by a trojan who collects your data and send it to the pirate.
You click on menu->Add->then you choose from the list Device, Mircrodrive or Storage Card if you have one. Then you type the name of the folder you want to secure.
I did a test, I choosed Device, and kept the folder name blank and clicked on ok. It added the "secure folder" under device. if you try to remove it you will have this warning "Removing the secure folder will destroy all data in the folder. do you really want to remove it?"
4 - Norton Tools
It contains 2 utilities, GetUUID and Lock
GetUUID will display on the screen 2 series of digites
the first one don't know what it is and second one is your IMEI
I guess this info is needed when the final version is released and
you need to register the SW
Lock utility display the following message when u click on it
Encryption may take several minutes. Pls wait for the device to power off.
If you need to soft reset, pls wait until encryption is completed and the
device powers itself off.
I clicked on yes, so the device start encrypting something .... then the screen turned off. I turned it on using the power button and it displayed to me the password screen which I entered. then it displayed the message decrypting for about 30 sec, then I had my normal today screen ...
Im wondering if it does not encrypt/decrypt the secure folders you
already chosen using the "Norton Secure Folders" utility.
Ive wrote to Symantec asking them for a manual or user guide, hopefully they will reply.
I have rated this SW 3/5 on their site, mainly because it is not clear what all utilities does and because Firewall is set by default and noting can be changed.
Hope my feedback will be usefull, and I hope other users will bring to us their experiences with the different Anti-Virus SW they have used on their Pocket PCs.
Just as I suspected, no real viruses just a nice proof of concept that asks you if you want to try it:
WinCE.Duts.A
A back door that needs to be run and does not spread:
Backdoor.Brador.A plus it would be useless if you are on GPRS/EDGE/UMTS or behind a NUT router.
This one seems like it could actually be trouble, if:
a) you leave in Russia
b) you are stupid enough to believe you can get WAP pages through SMS and that it would be cheaper than GPRS
c) you can get it to work on PPC.
Trojan.Redbrowser.A!jar
This one though, I have to admit is rather clever - using .NET to run both on PC and PPC amd is fairly destructive:
MSIL.Cxover.A
It is still unclear, however how its spreads from PC to PC (presumably you have to download and install / run it).
Of course given the fact that many people save their docs on SD and not the default My documents folder and that they do not disable security completely on their WM 5 and up devices (which are becoming majority these days) the effectiveness of this worm is more than questionable.
Well I still think it is too early to actually by this kind of apps. Also I think that as with many other programs the same "heavy" approach that works on PCs with many resources will not work well on PPC (not the way they are today). A different solution to virus protection needs to be found to be useful.
But hey - thats just my opinion...
So from what ive read its still to early to be using a resource draining av on the ppc? If this is the case, how about Spybot S&D? Is spyware more of a threat than viruses? are they really that much different? I find that spybot updates more regularly(when i connnect wifi).
as with virus's i believe that have to be made to support ppc's
in which case maybe due to spyware makers lack of innovation
that market have yet to take off
WingChan: whether to use the software or not is a personal decision - my belief is: given the list of threats it is too early. Also I believe that the method used to protect against viruses on PC is not suitable for PPC because of the resource requirement. Something more efficient needs to be invented, perhaps taking advantage of difference in architecture between WM and desktop - like the fact that system files can not be corrupted but only hidden.
Note that BigDede preformed the test on HTC Advantage which has a 600+ MHz processor if I am not mistaken. I doubt the app would be as unnoticeable on my 200MHz Prophet.
But it is only a matter of time before someone writes a real and damaging virus for this platform as it becomes more and more common. So if you really value the info you have on there you might want to get protection already - although a good and frequent backup would be much better.
I haven't heard of spyware for Windows Mobile, only major one for BB - any one got any news on this?
There is a major difference between spyware and viruses:
Viruses try to cause as much damage as possible and their effects always become visible sooner or later, in many cases almost immediately after infection.
Spyware on the other hand, needs to hide and tries not to interfere in device operation as much as possible and show no sign of activity.
levenum said:
WingChan:
There is a major difference between spyware and viruses:
Viruses try to cause as much damage as possible and their effects always become visible sooner or later, in many cases almost immediately after infection.
Spyware on the other hand, needs to hide and tries not to interfere in device operation as much as possible and show no sign of activity.
Click to expand...
Click to collapse
Very good explanation of the differences between Viruses and Spywares.
I agree also that it is too early today to really worry about having protection, but I prefer to be ready instead of regretting and wishing I had some protection.
Very good remark as well regarding the frequent backup ...
Need Help
Hello Everyone,
I'm not a developer, but I found your thread on this subject via Google and was hoping I could ask a question...
I'm able to download the Norton Smartphone Security Premier Edition Beta version, but when I try to install it (which I assume must be done first to my laptop, followed by sync'ing my laptop with my 8525) a "Self-Extracting Archive" window comes up that says: "Warning, one or more files skipped". This occurs when the installation process reaches "Extracting: SUPPORT\START.ICO 100%".
Does anyone know what I'm doing wrong?
Many thanks for your time!
A. J.
ajbt said:
Hello Everyone,
I'm not a developer, but I found your thread on this subject via Google and was hoping I could ask a question...
I'm able to download the Norton Smartphone Security Premier Edition Beta version, but when I try to install it (which I assume must be done first to my laptop, followed by sync'ing my laptop with my 8525) a "Self-Extracting Archive" window comes up that says: "Warning, one or more files skipped". This occurs when the installation process reaches "Extracting: SUPPORT\START.ICO 100%".
Does anyone know what I'm doing wrong?
Many thanks for your time!
A. J.
Click to expand...
Click to collapse
Hi
Maybe this warning is not a big deal, have you tried to install it by double clicking on the start.exe file ???
G.S./BigDede,
Thanks for the reply. I really appreciate it.
If I understand your recommendation, I don't think that gets me where I need to be. However, it could always be user error on my part.
When I try to "Setup" the file I downloaded (called "NSSPB.exe") from Symantec, a window comes up that contains a button that says "Install". However, after I click on it, it gets to a point in the installation process that shows "Extracting: SUPPORT\START.ICO 100%", and the process simply stops and a small window comes up that says: "Warning, one or more files skipped".
In essence, it appears I have recieved the entire 4.04 MB of program files I downloaded, but something goes askew when I try to extract/install them.
I'm stumped...
Thanks again, A.J.
I'll extract the files and will zip them for you.
Send me via PM your email adress so I can send you the zip file
Cheers
Hello,
I am a new AT&T Fuze owner and new in general to Windows Mobile "Professional". (Had a Symbian 60 Device Previously) I have been doing extensive reading and researching to figure out how to accomplish my goals but I keep running into dead ends. I have been searching forums and Google but I find that most information is formatted for people that have been in the community for a long time and understand all of the jargon. There seems to be so many flavors of windows and platforms that it makes my head spin and I also find that words like Smartphone, Pocket PC, Window CE, etc.. are thrown around very loosely.
Sorry for the preamble. Here is what I know so far.
Device = AT&T Fuze
CE OS 5.2.19971 (Build 19971.1.2.6)
CID = HTC_P4600 (Not listed in the WIKI here)
ROM = 1.95.502..5 WWE (10/20/08)
Radio = 1.02.25.32
Protocol = 52.39c.25.22h
First I was wondering if there was a positive way of knowing if a certain piece of software will work with my device and what that spec would be. Like does it go by windows version, phone version, both? Or at least some general rules of thumb what to take note of before trying a piece of software. (If it was designed for or works on other flavors of Raphael is it safe to try?)
My biggest problem at the moment is I can't seem to install anything anymore. I am getting a message about unsigned cabs or files missing. I'm hoping this wasn't something I did but it's a possibility. Some software "PPCPimBackup.exe" will still install but most won't like "Advanced_Configuration_Tool_v3.3.cab". I even tried to make a simple .cab using CeRegEditor to adjust the city string for the weather tab in TF3D. Any help here would be most appreciated. I am very weary of all these so called "unlockers" out there and even read a thread here where someone bricked their device by installing the wrong software for the device.
Is the Fuze the same as the Diamond? (They look identical)
What is the preferred way to back up the entire device or is it even possible with standard software? Most of what I found backs up PIM info.
When a program (Taskmanager 3.1) says to minimize, where does it go? How do you bring it back to the foreground or do you have to install a taskbar manager?
I actually have more I want to ask but that probably wouldn't be prudent. I think if I could help myself better once I understand what software I can and can't use with my phone.
Many thanks in advance and apologize for noobing up your forum =P
Eidolen
I'll try to answer some of your questions.
1) Normally, software will say windows mobile 5 or 6 as a requirement along with maybe .Net Framework. If it's for Windows Mobile most likely it'll work. Just have to try it and see.
2) Your programs are probably not installing because you may not have the required .Net Framework. I know Advance Config requires .Net Framework 3.5. So if you don't have it, install it. You can find it here or from Microsoft's website. You need the Windows CE or Compact version.
3) The Fuze is similar to the Diamond but don't go trying to install ROMs that are made for the Diamond. Use the ones in the Raphael forums.
4) If you want to backup your entire device, use a program such as Sprite Backup. This will make a full backup of entire system excluding ROM. However, if you want to do a restore, you need to make sure you have the same ROM installed, if not, it will create a lot of problems.
5) With TaskManager, when you minimize it just continues to run in the background. Program is still loaded and taking up memory/etc. Similar to when you minimize something in Windows. To bring it back, you can view the TaskManager and restore to foreground.
Hope that helps somewhat.
Wow,
Thanks you for the quick and non condescending reply. I've been surfing more since I posted and hopefully I could get you to elaborate on a few things.
2) Your programs are probably not installing because you may not have the required .Net Framework. I know Advance Config requires .Net Framework 3.5. So if you don't have it, install it. You can find it here or from Microsoft's website. You need the Windows CE or Compact version.
Click to expand...
Click to collapse
I did the .Net install and it went without a hitch but still no joy. I noticed on the authors support forums that others are having the same problem but no clear solution has been posted. /Sigh
I was thinking I needed to follow a procedure similar to the one listed here where you have to install a certificate and make some policy changes in the registry but since I can't find any info specifically for the Fuze I haven't done anything yet other than download the certificate that was linked in that post.
I should mention I am not a complete computer illiterate, and am fully comfortable with the registry and even more advanced techniques if necessary. I should also mention that I don't plan on replacing my rom at all. Just want to keep it to basic reg hacks, software installs, and some theming once I get things working the way I want.
I did already change one registry policy key (0000101a) to "1" from a thread I found on these forums, as it is something easily changed back but of course it did not help.
4) If you want to backup your entire device, use a program such as Sprite Backup. This will make a full backup of entire system excluding ROM. However, if you want to do a restore, you need to make sure you have the same ROM installed, if not, it will create a lot of problems.
Click to expand...
Click to collapse
Thanks, I will check this out. Sounds like exactly what I was looking for.
5) With TaskManager, when you minimize it just continues to run in the background. Program is still loaded and taking up memory/etc. Similar to when you minimize something in Windows. To bring it back, you can view the TaskManager and restore to foreground.
Click to expand...
Click to collapse
I understand what you said but what I was trying to figure out is how to recall it from the background. It doesn't show up in the TF3D task list when it's minimized so I was wondering if you had to click on the task bar or do some certain trick to bring it to the fore-front. The ability to move between programs easily is my biggest gripe so far as I seem to have to open and close the keyboard, hit home or back a lot to move around. I would love the ability to hit some hot key or some secret spot on the screen to launch taskmanager and then I could use it to go to whatever program I wanted.
I have seen a few bugs in TM_3.1 that cause crashes, but it is an awesome program and hopefully the developer will keep working out the bugs. If there is another program you would recommend that accomplished the same type of functionality I'd be interested in trying it out.
Thanks again for your friendly help.
Eidolen
Just looked at the contents of that cab referenced from that link I posted. It is just a Setup.xml file with the following contents.
<wap-provisioningdoc>
<characteristic type="SecurityPolicy">
<parm name="4119" value="144"/>
</characteristic>
</wap-provisioningdoc>
Any thoughts?
As for .Net, the following is from Modaco, and I found that it worked like a charm:
How to install and use .NET Compact Framework 3.5
If you're a developer or have knowledge of .net Compact Framework, you'll be aware that version 3.5 has shipped. You'll be aware that it offers a number of enhancements in features, stability and performance, and you'll likely also know that it provides full backwards compatability with previous versions of the Compact Framework. What you may NOT know is that when CF 3.5 is installed on a device, applications that target previous versions of the Compact Framework will continue to run against the old versions, and 3.5 and previous versions will live side by side on the device. Only when new devices come along will we see ONLY 3.5 on a device.
This presents a number of problems, namely
• Users who deploy CF 3.5 to their device but use applications targeting older versions will not benefit from the 3.5 performance improvements
• Developers who develop apps for pre CF 3.5 frameworks cannot easily test their applications ready for when 3.5 only devices come along
Thankfully, help is at hand in the form of a little known Compact Framework 3.5 powertoy named '.Net Configuration'. The application, which is available at Microsoft, provides the user with full granularity of control over the .net CF on their device. You can see installed versions, change the used CF version for a particular application or change the used CF version for all applications run on your device! Perfect!
Sadly in Microsoft's infinite wisdom the application in question is tucked away in simple EXE inside the 6.2MB download and somewhat hard to find, so i've taken the liberty of packaging it up into a CAB here that installs it with it's own Start Menu shortcut.
- Run '.Net Configuration' from your Start Menu
- Navigate to the 'Device Policy' tab and select version 3.5
- Select 'Apply' then 'OK'
That's it, you're done!
Thanks kindly but I'm guessing now that myself or a piece of software I've installed has borked my ability to install software. It seems I can install exe files but no cabs, including the one you posted will install.
As I've stated I have not made any attempts to unlock anything yet but have installed some software and made some registry tweaks. I wish I could see what exactly is happening like Procmon does for windows to pinpoint the problem, but I might just have to resort to a hard reset if I can't figure it out.
I'm open to any ideas but if I don't figure it out tonight I guess I'll reset tomorrow. Thanks for the guidance and help.
Cheers,
Eidolen
@eidolen
You have a SD card?
Gimme some time and I write you a little 101 how to deal with the Fuze.
eidolen said:
Thanks kindly but I'm guessing now that myself or a piece of software I've installed has borked my ability to install software. It seems I can install exe files but no cabs, including the one you posted will install.
Click to expand...
Click to collapse
eidolen said:
I did already change one registry policy key (0000101a) to "1" from a thread I found on these forums, as it is something easily changed back but of course it did not help.
Click to expand...
Click to collapse
You might want to double-check that registry hack to make sure it's correct. Seems like a big coincidence that the one registry hack you've made so far is to allow unsigned cabs to install and the biggest problem you seem to be having is that you can't get unsigned cabs to install....
eidolen
You have a SD card?
Gimme some time and I write you a little 101 how to deal with the Fuze.
Click to expand...
Click to collapse
I ordered my SD card yesterday =/ Hopefully be here soon. Still very interested in the 101 though!
You might want to double-check that registry hack to make sure it's correct. Seems like a big coincidence that the one registry hack you've made so far is to allow unsigned cabs to install and the biggest problem you seem to be having is that you can't get unsigned cabs to install....
Click to expand...
Click to collapse
Yeah I gave that a shot but no joy. That wasn't the only reg hack I did but the only relating to "Unlocking". I haven't touched anything I wasn't pretty sure about. For instance I have looked at all the tweaks for speeding up the TF3D using cache setting but the numbers don't match so I never tried it. If I didn't understand what the tweak was I stayed away.
I did the PTT button tweak for voice/camera and played around with the cities for the weather app. Other than that I can't think of anything else I touched in the registry but I did a lot of looking.
On the other hand I have installed a good bit of software to try out. I have also rearranged my menu items by deleting shortcuts in the start menu folder. Even though I've done a good bit to the phone I think it might be best to start from scratch with a hard reset and start again with the knowledge I've gained in the past few days. My Opera browser has been getting a real workout with 40+ tabs going =P
I did find another thread here that has someone with a similar problem but the way it happened was entirely different. His fix was to wipe the phone and use the same software I was trying to install when I found this problem.
http://forum.xda-developers.com/showthread.php?p=3038792#post3038792
I took ecltech's advice and got Sprite Backup and made a backup already. I would rather fix the problem but it sounds like it might be difficult tracking it down so I'm prepared to start again. What would be great is finding some guide or general direction in what programs and or tweaks I should install and in what order and any other pertinent information regarding starting from scratch. "The Must Have" utilities and programs.
I can't believe how helpful everyone's been so far considering this is a developers board. I figured it was worth the risk to get chewed in the hopes of getting the best advice. With all the info surfing I've been doing it's clear that this is the site where it all happens.
Cheers and thanks again,
Eidolen
OMG!
I'm almost too afraid to admit it but at least I feel good that I figured it out on my own. I was smart enough to make a backup of the registry with CeRedEditor before doing anything major and remembered it had a compare feature. After loading it up It immediately occurred to me to look at HKCR\cabfile and that's where I found my answer.
I had downloaded a little free utility from SKTools called Cabinstaller that allows you to choose where programs get installed. Somehow the registry entry it made didn't correctly point to the executable. In any case I think I installed it late the other night and forgot about it because the exe files I installed after that installed fine. I should have tested it immediately and I wouldn't have had this problem. /sigh
Thank you everyone for the help and ideas and even though I've fixed this problem I still might do a full reset and start from scratch now that I got all mentally prepared to do it and start over feeling a little more confident in what I'm doing.
While it's on my mind right now and since I never got a solution for the question in my first post, is there a hack or small little program that will allow you to put a shortcut in either the top bar where the start menu is or in the bottom where the shortcut for the on screen keyboard is so I can invoke the Task Manager easily to help with navigating? I wouldn't even be opposed to a shortcut in the TF3D pop-up you get when clicking on the top right bar. It would be great if this could be done with a bloated program but not opposed to it if the program is useful.
Thanks again everyone. I guess I'll start a new post for any new questions. (I have lots but will try and figure out as much as I can by myself first.)
Cheers,
Eidolen
eidolen said:
I
I took ecltech's advice and got Sprite Backup and made a backup already. I would rather fix the problem but it sounds like it might be difficult tracking it down so I'm prepared to start again. What would be great is finding some guide or general direction in what programs and or tweaks I should install and in what order and any other pertinent information regarding starting from scratch. "The Must Have" utilities and programs.
Click to expand...
Click to collapse
I think you're probably right about starting again from scratch. It would probably be less work than tracking down what's causing your problem and then you'll be starting with a cleaner slate for installing everything going forward.
There are a few different threads on here about what constitutes "must have" apps for the Fuze and the one thing I can say is that no two people agree on the list! Your best bet is to seach out those threads and see which ones you think would be most useful to you. A great place to get started is at http://www.blownfuze.org using username and password 'xda' (without the quotes)
My suggestions for the generic must haves are:
Total Commander
PHM Registry Editor (or whichever reg editor you prefer)
Diamond Tweak
Diamond TF3D Config
Other basic programs that might be worth checking out depending on what you do on your fuze are:
PocketShield or S2U2 for locking the phone
TCPMP Core Media Player
TorchButton for using the LED flash as a flashlight
BeyondPod or pRSS Reader for RSS feeds and podcasts
GoogleMaps and/or Live Search
Good luck!
Sprite backup is included in your Fuze as original software. I always keep a full backup copy on my Sd card of a good clean WM 6.1 install with all the must have tweaks done already. You will find it saves alot of headaches when you mess something up trying things out. After that I do a weekly backup as I add more and more stuff over time.
does diamond TF3D Config or diamond tweak work with this ROM version?
Thanks yzf750, I am preparing to do just that. I am getting prepared for a hard reset now once I notate what I want to keep that's on my phone already. Hopefully I can get it set up by the time my SD card arrives this coming week and can do the backup to it for keeps.
I read a blog post about doing a soft reset after a hard reset to prevent the ATT software from installing and I think I really want to try that. I just need to make sure I install the stuff I want to keep like TF3D manually afterwards. I'm hoping to find a more detailed guide for the procedure than what was posted though.
I'll post back and report if the smoke genie escapes or not.
Eidolen
some n00b guidance
Ok so i have been looking at these forums for a few days now doing homework before i even get the phone(its ordered). So my questions are
1. if i have AT&T unlock the phone(i know someone who works there so i hope they can help out) do i still need to do the hardspl to change radios etc?
2. Whats really the difference between all these roms built by users and just using BuildOS(im assuming this works on GSM phones and not just CDMA because its from PPC) to build your own ROM? and do most of these tweeks come prebuilt into these roms or do u still need to to other stuff? i.e reg tweaks etc, like i think it would be better for me to just build a rom with BuildOS with the apps i want etc and not keep flashing all the time
3. Is GPS still a problem for people?, i think ill just use tomtom or garmin and hope for the best as its not a huge concern. After looking around i guess its just a matter of finding the radio that works best for the individual, so anyone in the .US new england area have any recommendations of the best radio in the northeast like NYC area?
4. whats a good order to do this stuff?, i plan on using the phone for a couple days or so as stock just to get the general feel of the OS in general. then prolly flash the ROM with a custom BuildOS ROM(unless someone can provide the difference between BuildOS and say PROven ROM), then do w.e else needs to be done. ive seen the recommeded tweaks, just not sure if they still need to be done with a flashed ROM. not really looking for a game phone more office apps like RDP and irc etc, sys admin tools
Basically i think theres just a ton of info on here which is a good thing but im just getting started on Winmo although flashing etc dosent intimidate me so im eager to get started just a little unclear on some things and cant seem to find the answer just surfing, so any help or links to some stuff i might have missed is appreciated. Pretty much just want a smooth runnin ROM thats not stock of course, decent gps reception and the apps i want. thanks all
Look here, I made a little write-up for the basics using a stock ATT ROM. I ran this routine actually twice on my phone (ROM flashing junkie) so it should be fairly complete.
I have to note that, in most cases at least, I know what I do and can "recover" from a ROM flash within ~ 30 minutes, having all software, tweaks and contacts restored.
Regarding ROMs
That's an open can of worms with two next to it waiting. Read the threads and read the problems and decide later if you want to flash or not. If you are not used to WinMo phones it's perhaps better to hold back a week or two.
Some ROMs are built from original Raphael builts others are based on WinMo 6.1 but contain partially applications and tweaks from other HTC devices. The latest build # need not to be the best. For example RRE's ROM is based on the original ATT ROM and he created a really nice good performing ROM while other Chefs rip out first all guts and basics of a ROM (making it "naked") adding features and programs later. That's a more or less political discussion what's better and what's not and you have to decide yourself based on what you read and/or experience. For MY part I know Monx/HT from the Tilt times and always appreciated his work and speedy ROMs and he continued the same line on the Raphael/Fuze though it took him some time to come where he is right now.
As said all political in that regards, almost all ROMs out there ARE GOOD and have advantages in the one or the other area.
Tweaks
Yes the tweaks work even for a stock ATT ROM with ATT's TouchFlo/Manila (though I think it's plain ugly).
GPS
Again a difficult subject. For example the stock GPS (enabled or disabled assisted GPS settings) works kinda well with google maps BUT doesn't perform as expected with 3rd party GPS apps (TomTom, iGO). Keep in mind a lot came from other devices and for example iGO on the Tilt rocked down to the street number with no lag at all where the Fuze is doing more "guesstimating" than performing (compared to the Tilt).
Backup
Do a PIM backup once or twice a week and do a FULL backup once a week or if you installed new software after you confirm that you like it. If you wreck your phone for whatever reason AND you stay with the SAME ROM a full restore will work.
Just Wow!
That's an impressive piece of work there. I haven't stopped reading or poking around while I'm waiting for my SD card to get here and had quite some experience today. I did read the thread regarding doing a "Non-Bloat" Install and actually started to do it but stopped when I realized there still seems to be some residual bugs to the process. I figured for now even with the little bit of confidence I've gained I'd wait on that a little longer.
I did jot some info down while it was still "Bloat-Free" for anyone interested:
Bloatfree Services:
App Service APP1:
USSD APP8:
Push to Talk PTT0:
EnlargeStartMenuEMX0:
HTC IMS service IMS0:
STK Service AP15:
LargeTitleBar AP21:
HtcServices HSV2:
Keypad KBD1:
Bluetooth Audio Gateway BAG0:
Software Disable Dialog Service SDD0:
Sync Bluetooth Server ASV0:
Software Management Service SWM0:
Certificate Enroll Engine CES0:
SNApi SNA0:
DPT DPY0:
LAS LAS0:
Credential Manager CRD0:
Notify NFY0:
OBEX OBX0:
Bluetooth HID Loader BHL0:
SqmUpload SQM0:
Click to expand...
Click to collapse
Bloatfree Processes:
NK.exe
RegistryCSPTool.exe
OperaPreL.exe
poutlook.exe
sapsettings.exe
opera9.exe
htcimssvc.exe
tmail.exe
cecmd.exe <--Total Commander
conmgr.exe
TaskMgr.exe <--duh
rapiclnt.exe
repllog.exe <--activesync
biotouch.exe
shell32.exe
QuickGPS.exe
VoiceCMD.exe
SIPGT_app.exe
services.exe
filesys.exe
gwes.exe
manilla.exe
device.exe
cprog.exe
Click to expand...
Click to collapse
I forgot to check the memory and storage readings sadly but I figured this list could be checked against the full bloat version to see what processes and services could be killed. I figured I'd play with a full working install so if anything didn't work I would know it was from myself or software I installed instead of guessing if it was a side effect of the no bloat process. Also I could learn what the bloat was and strip it away.
Once I decided on Bloat I started a Log/Diary of everything I did for my own reference and thought it might be useful for troubleshooting later. Everything was going smooth until I decided to take on the behemoth named RealVGA.
Luckily I made a full Sprite backup previous to playing with it and am reinstalling that backup as I write this.
If there is one piece of advice I could give from the little knowledge I've gained so far is that most of the upper-end hacks/tweaks software that is available are living breathing complex entities and are not to be taken lightly. Each one needs to be thoroughly researched and understood before using unless you have an older device that has been supported for a long time. I find very little information on using most software regarding the Fuze even though it is very similar to other devices. Truth is, it is not identical which can make things hairy at times. Anyway the more you fail, the more you learn.
For other Fuze owners out there I'll post my personal log so you have an idea what programs I had trouble with and what I tried to do to resolve them. For sure I had huge problems with RealVGA as well as PocketCM and PocketCm Keyboard. It's a shame too as they all are outstanding upgrades.
Well I think I'll be ready for your tutorial when my card gets here so I will be sure to report back to let you know how it went. I already learned a lot just from reading it. For one I didn't know you could do anything over usb if you cancelled the ActiveSync. I just used that trick while restoring my phone and still haven't done a sync. I'm sure that guide will be a huge help to many like myself.
Huge Thanks!
Eidolen
PHP:
Diary of a Blown Fuze (Blown Attempt that is)
Just a stream of consisnous, sorry if some doesn't make sense
Log got more vebose as I went.
"Fresh Bloated Install"
Boot
Set Weather City
Configure WiFi
Calibrate G-Sensor
==================================
Memory:
Storage======Program
Total 294.53 || Total 200.99
In Use 74.05 || In Use 70.93
Free 220.48 || Free 130.06
==================================
Turn off Auto Backlight - Adjusted Settings
Removed Programs - I Play Jewel
Configured all settings under "All Settings" tab
=====================================================
Having keyboard problems where it is unresponsive. Had to use on-screen KB
to write user information. Also had KB lag a few times afterwards but not
as severe.
=====================================================
SYNC (Merged 89 file items)
Install NETCFSetupv35.msi
Install netcfcfg.cab
Install tcmdpocketarm.cab
Configured .Net to use 3.5
Installed Advanced_Configuration_Tool_v3.3.cab
Create Sprite Backup "Fresh Install" ACT3.3 not config yet
=========================================================
Phone supplied Sprite backup software reported "backing up 85mb" but when finished
the file is only 144kb! Not sure what happened. Will try to initiate
a backup from the desktop software.
=========================================================
Initiated Full Desktop Version backup "Fresh Install 2 FULL" 93.03M
Ended with file size of 60.3M
**********************************************************
Configure Advanced Config Tool:
User Interface ->
Horizontal Icon Spacing: 150
Vertical Icon Spacing: 140
Icon title font size: 8
Popup Menu Font Size: 800
Power Management ->
All either default or "Advised" setting if applicable
Screen ->
Show Orientation: Yes (default)
Keyboard Backlight Timeout: 15sec
Suggested Words: 3
Network ->
Device friendly Name: #####
Phone ->
Show All Call History: Yes
Call History Clean: Never
Show Battery Icon: Yes
Show Band: Yes
Bluetooth ->
BT Device Name: #####
GPS ->
Logfile Size: 32K
Internet Explorer ->
4 Way Navigation: Disabled
Clear Type: Enabled
Search Page: Google
Max Connections Per Server: 8
Messaging ->
SMS Delivery Notification: Yes
Use Unicode Support: Yes
Symc Sent Items: Yes
Show Roaming: Yes
Calendar ->
Show Lunar: Yes
Show Events in Week View: Yes
Camera ->
Capture Key Delay: Enabled
Key Delay: Enabled
HTC Animation ->
Volume: 90
HTC Camera Album ->
OK Button: Close
Misc:
Auto Daylight Savings Switch: Yes
Show Daylight Savings Notification: Yes
<<<<<<<<<<<<<<<<Noticed lots of options missing from last time I used this program before the hard reset like more font sizes among other things>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
**************************************************************
Sprite Resore "PIM_2008-12-13.exe" PIM info Only
Contacts Restored but no TF3D settings were retained
(No contacts in TF3D, Messages, etc..)
Set up both email accounts
Set Up online AB LDAP
Adjusted Camera Settings
Copied My Pictures,Notes, Ringtones, PTT shortcuts and other "Files" back to device using Sprite Explorer File=2008-12-14.exe
Extracted "Browser Favorites" From Sprite Explorer /System Settings 2008-12-14.exe
Hand Edit Opera.ini
Transferred Some opera files (wand.dat, cookies, images) using Sprite Explorer 2008-12-14.exe
Transferred a pantload of s/w to be installed
Installed Diamond_TF3D_Config_Setup_v0.6.7.cab
(Made speed adjustments and removed Worldcard and "Unknown" TAB. Also "Unlocked" Noticed program launcher shows a ton of empty entries.)
Install ResPack128dpi.ARM.CAB
Install ResPack96dpi.ARM.CAB
(Sprite backup crashed on reboot from ResPack96dpi.ARM.CAB)
InstallRealVGA_11.CAB
Install missing ipxxx.dll's and screen went black then rebooted
**** my Pants *chant* no-brick no-brick no-brick
Watched it reboot. Something crashed but then TF3D loaded with tiny fonts!! (128dpi)
Modified Menu Icon spacing for 4 in a row. (Want to tweak further if I keep RealVGA)
=================================================================================
HKLM\Software\Microsoft\Shell\
Add New Key "IconConfig"
In there Add DWORD Value:
"HorizontalIconSpacing" Dec value="112"
"VerticalIconSpacing" Dec value="115"
"IconTitleFontSize" Dec value="6"
==================================================================================
Notice a small black band on TF3D screens at the bottom. Acts as part of the tabs
Total commander toggle icon bar does not fully open up.
Contact all people link does not work
Contacts from Start Menu does not Work
Phone does not work
Installed respack96outlookfix.cab and Changed to 96 DPI now contacts and phone works!!
Adding Contacts in TF3D very buggy, auto puts in a picture somehow and have to go back and change it.
NVM...It selects the pics I had assigned before the reset somehow. Cool!
On Screen Keyboards Very Borked (Only Partially Visiable) Trying PocketCM Keyboard for VGA *Crosses Fingers*
It works but no colors, just plain Gray *humph!*
===============================================================
Config Fonts in Advanced config tool
UI ->
H Scroll Width: 25
V Scroll Width: 25
H Arrow Size: 32
V Arrow Size: 32
Icon Title Font Size: 16 (Was 6)
Menu Bar Font: Large
Popup Menu Font Size: Large
===============================================================
Reset
Home TF3D Screen buggy, Tabs at bottom are doubled up. Clears when used to scroll but large black bar at bottom now
Wow! TF3D Communtications screen is really toast! It shows in upper left screen and at least it works but it's almost unreadable.
Not noticing any change in fonts so far
"All Settings" Won't Launch. Ouch!
Umm, System Locked up hard
Tried sliding keyboard and heard sound and title bars appreared but no luck, home and back not work either
It let me reboot with switch at least, not reset button
Tried Unticking "Disable Skin" in RealVGA
Reboot
"All Settings" Still Borked
reboot
Start Menu -> settings locks up too *cry*
Reboot!
Maybe result of font settings in ACT?
Might be time to do a restore =(
===============================================================
Config Fonts in Advanced config tool
UI ->
H Scroll Width: 19
V Scroll Width: 19
H Arrow Size: 20 (default)
V Arrow Size: 20 (default)
Icon Title Font Size: 10 (Was 16)
Menu Bar Font: Large
Popup Menu Font Size: Large
===============================================================
Reboot
RealVGA is nice but not sure it's worth this effort. Just too many problems.
Noticed graphics in TF3D are much slower and laggy now as well.
"All Settings" still borked Not sure what else to try at this point.
Good info on this subject is hard to come by. Most ppl seem to have good luck with this app.
Went to re-tick the skin option in RealVGA but it was still ticked. hmmm
What I think is needed is an app that could swap resolutions on the fly with a hotkey. ( Prolly not technically possible)
At least you could have normal usage and only use for certain apps that really benefit from it.
After another reboot the "Disable phone skin" is checked again. Guess it can't be unticked.
Un-ticked "No enlarge title Bar" in Diamond TF3D Config
I am able to open the "Programs" link from the start menu, wonder why settings is screwed.
Tried settings again, no joy, was able to use home key though this time. Not locked up.
Start menu does not work now though. Yikes, had to use reset this time.
Throws arms in the air!
Hard Reset =(
You are funny eidolen.
If you want copy the files I provided to your device (since you don't have a DS yet) and play with it.
You'll hard reset anyway when the SD arrives - LOL
Your also going to find at some point that the more and more tweaks and modifications you make,more problems will start sufacing. I was a rom flashing junkie like many on this forum for 2 years. Since I replaced my prior phone with the Fuze I am running just the stock rom without bloatware and a FEW select tweaks (includes radio change). It runs fast, works good and I dont have to soft reset it all the time.
Take a look at every custom rom, Im not putting any of them down, but after time the threads on them become 100 plus pages long, the number of other fixes to get them running right become impossible to keep track of. It becomes a daily job of just trying to keep that rom working without breaking some other feature or getting it to work right. They put out weekly fixes on most custom roms. They start out with the right intention, but it soon becomes just a bloated non oem rom after time.
Its addicting and fun, but at some point a person just wants to use the phone instead of hard resetting it all the time, flashing roms nightly and trying to figure out how to fix stuff in each rom.
I reached that point now and my fuze is outstanding without having to spend days tinkering with it. It is snappy, reponsive and ALL the software I have installed on it works, and the GPS works flawlessly even inside my house.
But again, your "hands on" approch as your doing now, is probaly the best way to learn
teh bestest
between these last few posts and my little chat with our neighbors PPC on there irc channel i am pretty confident i know what the deal is now, you guys have been a great help, i think im going to play a bit with some roms of course but eventually land on a bloat free standard rom with some added apps like putty and irc etc for sysadmin work, on that note yzf750 could u tell me exactally what u have running on yours sounds like its what im looking for.
I got my new HD2 and was delighted, but then tried to get the software that I have been using previously to work on it.
As I travel around and look in second hand book and record shops, I am never totally sure from memory whether i have a particular book or cd. Publishers keep changing the covers and synopses.
On my Psion, it had as standard a lovely card database / rolodex type of program. It was easy to input, easy to search.
When I moved to the hx4700 on windows 2003SE I lost that. Eventually I found Data On The Run which is fully access compatible. So I've converted all of my lists to access, and was happy enough. It wasn't great as it tries to get too much on, and portrait only.
Now on the HD2, the software does not like fingers, only styluses. Scrolling is virtually impossible, as it won't drag to scroll. The pop out scroll bar helper does not show. The developer is one guy and hasn't time to continue developing.
I've looked at stuff like Bookbag plus and someone mentioned "My Collection" but I cannot find it anywhere on the net. There are serious commercial pieces of software that are in effect full database programs, but that is a sledgehammer to crack a walnut.
I know this may only help in the short term, and doesn't solve the software issue.
Have you changed the original theme on the device? If so the Pop out function on the theme is lost in order to return it without going back to the original theme you could try this. please remember to backup
Hope this helps in the short term.
Try this
Try ListPro.. it's a great application..
Neville.Holland said:
I know this may only help in the short term, and doesn't solve the software issue.
Have you changed the original theme on the device? If so the Pop out function on the theme is lost in order to return it without going back to the original theme you could try this. please remember to backup
Hope this helps in the short term.
Click to expand...
Click to collapse
Thanks for hte idea, but Nope, original theme. Pop out scroll is there for other apps.
Klaus1960 said:
Try ListPro.. it's a great application..
Click to expand...
Click to collapse
THanks. I had seen Collectorz which has templates for this, but had not found listpro. It looks a fairly steep learning curve, and I need to import my existing lists. However, its great advantage is that it is only one program that covers a multitude of lists, so i won;t be paying out twice or three times for basically the same thing.
I've installed and imported my book list, so can now try and get it synchronised. I had to install the cab file separately. I can set up the synchronisation in the Windows MObile Device Centre, but that has to be done through "files" and unless i have missed something that only lets me synchronise to the machine, not the storage card. That is no damn good.