Anyone has a dumped 1.69 Stock SPL T-Mobile Germany ?
The only Stock SPL which I found here is 1.90 right now ?
If no one has dumped it so far...
Can someone tell me how to dump it ?
(Just for warranty reasons...)
Greets !
http://forum.xda-developers.com/showthread.php?t=462141&highlight=stock+spl
No Answers...?
fubsle said:
http://forum.xda-developers.com/showthread.php?t=462141&highlight=stock+spl
Click to expand...
Click to collapse
There is no (approved) file to download and no answer to my question...
No one can help me with this problem ?
No one has a working 1.69 SPL ???
I do own a device with the SPL 1.69 but extracting it does not work.
See my post in a different thread :
http://forum.xda-developers.com/showpost.php?p=3370041&postcount=163
Can someone PLEASE upload a stock SPL 1.69 or tell me how to dump it ? (and make it flashable then)
Greets !
Push
Pushing again
I think I have solution. I needed spl 1.69 too, but I found only one which didn't worked (phone gone to black screen and later flashing ended with error message).
So I just flashed stock spl 1.90 (it worked) and then reflashed original rom (including spl) and I had 1.69
Related
Hey guys,
I tried the WWE-ROM with BigStorage now, but I just want to go back to the original TMO Germany ROM, cuz I don't have big advantages of it but I lose my warranty...
Now my Problem:
Upgrading to WWE was just easy as described in the Procedure.doc on the ftp. But what do I have to do to get the original ROM back?
I saved it as a German.nb1. D I have to use ntrw write German.nb1 h: ? (h: is my sd-card-slot)
That way it doesnt work, the Bootloader doesnt even recognize the ROM. When I backup my WWE-ROM to the SD-card and the use that ntrw command from above, the ROM is recognized, but after having updated it, I can't bot anymore.
Hope anybody can help
greetz Stefan
Shipped rom?
Hi Stefan,
Seems like there's something wrong with your original rom-dump. Had it myself & it's a pain in the ***. Why not download the original German TMO shipped-rom & try it with the normal usb upgrade method?
Since your magician won't boot the software will probably tell you're upgrading from version blank, but that's no problem it will work. just put it into bootloader, connect usb & start the update program.
Success, M
seems to work, I'm just upgrading it, just had to put it in bootloader-mode again and start the update-utility from t-mobile.de...
will report if it really worked later on
Hi! you would do me a great favour by putting the rom on the ftp! i would really need it!
Please!
are you from germany or from austria?
greets
I don't need to upload it, its not even the most recent version (my original ROM was never, but I didn't find the original from TMO in a newer version :-( )
Just download it from t-mobile.de, I'm from Germany anyway...
greetz Stefan
Hi Everybody,
First of all let me thank in advance any help and expertise provided.
So the problem i need to solve is the following. I have the S200 (bought in germany, so it's the O2 XDA NEO), and as soon as i bought it, as it was in german, i managed to flash it with a rom in English (1.5 years ago)
Now, i tried to flash it with a Touch rom (don't remember which. PDA VIET? maybe) and it didn't work and now i'm stuck at the bootload with the current message:
IPL 2.20.0001
SPL 2.20
I've tried several roms and some (apparently) flash but then get back to this bootload screen, others don't flash at all.
Anyone can help me then solving this? I'd like to install one of the Touch roms, if not possible just bring it back to life with any WM5 roms...
Thanks in advance again
Cheers
L
Search for an official WM5 ROM like from o2 or Qtek! Connect your Neo via USB to your PC and start the update process! That#s all to bring your device back to live!
Thanks for the quick reply, but i tried this already but it doesn't work as well. I did somehing to the SPL (i was doing it a bit blindfolded as i'm quite newbie in this) and i think that's why i cannot flash anything anymore, not sure.
Is it normal to have SPL 2.20 (no other digitis after the 20)?
ANd to bring it back to life, do i have to install one of the original roms? can't i simply install the Touch versions?
Thanks again
Cheers
Try a really official WM5 ROM, like from o2 Germany! And when I correctly understand which Touch ROM you mean, it can't be used to recover your Phone!
Ok, tried as suggested but got
error 296
This NBF file cannot be used for you PDA phone. Please newer NBF file
Suggestions?
Thanks in advance
Hmm, also tried with RUU_Prophet_220739_2207119_021921_QTEK_GER_Ship_NO_IPL_SPL.exe
from List of Available Original Shipped ROM Versions, and got Error [300]. This Update Utility cannot be used of your PDA. Get Newer Update utility.
Also tried with this one
RUU_Prophet_220739_2207119_024721_QTEK_GER_Ship.exe
From the same place,
Error [294] Invalid Vendor ID
Help?
find for o2 neo rom, from o2, thats the only way, coz in bootloader u cant bypass CID, so go for google.. or PM me...i willl give u the link!!
or go on the following link.. there is a rar file with no vendor ID.. use that.. u will have ur phone back...
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/
malhaar said:
or go on the following link.. there is a rar file with no vendor ID.. use that.. u will have ur phone back...
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/
Click to expand...
Click to collapse
thank you for your reply, i tried from that link several roms including this one RUU_Prophet_215738_2157127_023021_QTEK_FRE_Ship_NoVendorID.rar
No vendor ID. This was the only one that started the flashing process, but stopped at 80% with the error [326] This nbf cannot be used for your PDA phone. Please check your nbf file...
Anyone, tips?
How to proceed. Thanks in advance for the help provided.
Try PDA Viet Step 1
Try PDA Viet Step 1 Temp
hi
my htc prophet got into boot mode too and wondering how to recover it ...does this method I mean full charge with an original charger work for anyone ....can you please what you got by this exiting experiment .
regards
Try this.
If that fails post again but be more specific e.g. what did you do before this happened?
Having the same problem too, try to flash many rom on my 818 pro, but once the process done, it stucks on boot loader screen
can anyone solve this problem? i have the same
but i can install (flash)rom after flash end and prophet restart it stuk on bootloader plz help me
Try and flash the QTEK NVID WM5 AKU2.2 ROM. I'll find a link soon, but I think there's a copy on skyn3ts FTP.
Try this: ftp://xda:[email protected]/Roms...'s/RUU_Prophet_220734_2207114_024721_NVID.exe
hi the link dosent work pls help us
more info
i have t-com tc 500 wich before i want to upgrade it ,has prophet touch rom version7
sorry i can use the link
downloading
saied 1 said:
hi the link dosent work pls help us
more info
i have t-com tc 500 wich before i want to upgrade it ,has prophet touch rom version7
Click to expand...
Click to collapse
That means it is unlocked. Try the ROM I linked earlier just to get the device usable.
hi thanks for yor fast reply but i download the rom that you link and run it in 80 percent of flashing the new rom i have wait few minutes and in device the process bar become red after afew minutes it goes blue(green) and continue but again in 95 percent get red and after minutes i recive the eror that tell : ERROR [320~328] : INVALID COMMAND please chek your nbf file idont know what should i do
and i found this on read me file that comes with rom you linked above
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
my bouth spl and ipl is 2.58.0001
please help me
2.58.0001
Click to expand...
Click to collapse
Never seen that before...
hi everyone,
i got an O2 neo aka htc prophet and long time ago I flashed my room (no idea which version and from whom)
now I need to send it back to get it repaired and I cant install the original room, because downgrading just doesnt work. (I get a message like:
the nbf files cannot be used for your pda phone, please get newer nbf files)
What can I do?
I really would like to use the warrenty and get it repaired. So please someone with knowledge help me out.
thanks
Liu
just found out that my
rom version is: 2.20.7.34 WWE
extrom version: 2.20.7.114
and the original image version is 2.15.4.140.
anyway to dowgrade that ****?
maybe unlock extrom or something? (I have no idea what im talking about, so please please help me out )
Same problem here...did you find away...did it previously but cant seem to find the right one...
Guys check the posts their is a link to the original prophet Roms, then after that follow the upgrade manual ok any doubts send me a message.
look in the wiki the orig roms are there and how to flash them
Hello All,
Firstly let me apologize if this has been answered already, but after hours and hours of reading I am still unclear on a few points.
I want to be able to take a complete backup of my Stellar before I update anything in case of any future problems, so that if need be I can revert it back to the same state as it is in now before sending it back to O2.
1 - Is this feasible / possible?
2 - I know I can unpack and repackage the OS ROM, but what about the radio / spash logo & SPL?
3 - Can all the CID, Security and SIM locks be replaced if required?
Can anyone recommend the best course of action for me to take, so that I can dump everything first, in a format that can be easily re-flashed, before I start to load HardSPL etc and then suddenly find I am S.O.L and cant return one component to the original version..
If anyone would like copies of the original Firmware / Logo / Radio etc after I manage to dump them.. I'll be more than willing to share - provided you dont mind giving me hand with dumping etc
FYI - Here are the Versions on my device:
Radio: 1.27.12.32
Protocol: 22.45.88.07H
ROM Version (from Bootscreen): 1.82.00.00
ROM Version (from Device Info): 1.82.206.1 WWE
ROM Date: 10/04/2007 (Not sure if thats 10 April or 4 Oct)
WM6 Pro. CE 5.2.1622 (Build 18128.0.4.4)
Model No.: Kaiser
Thanks in advance...
you could try searching, someone has probably done all the dirty work in dumping and reconstructing the o2 rom already
XtreMe_G said:
you could try searching, someone has probably done all the dirty work in dumping and reconstructing the o2 rom already
Click to expand...
Click to collapse
From what I can tell, but I may be mistaken, this ROM is a different version to the Shipped / Reconstructed ones on the Kaiser Wiki...
Also, the splash logo on my Stellar, is definately different to the O2 splash logo that is available via download... Mine shows a 'wireframe landscape' while the other is the same bubbles splash that I had on my Wizard (O2 Xda Mini-S)...
I have a Stellar and would love a copy of the O2 ROM as I have flashed without backing up so if you manage it I'd be in the queue for a copy.
there is a rom available, but it doesnt restore the spl or the front splash screen. anyway these could be extracted?
hi
where is the rom located?
O2 Stellar ROM
seconded! I too now need the ROM, but have searched the site and the FTP to no avail, anyone have a dumped ROM that they can point me too please...
TIA
Try
http://forum.xda-developers.com/showthread.php?t=349123&highlight=stellar&page=2
THANKS!
... you are a lifesaver
(not too sure why I could not find that myself tho )
Does anybody have this rom ?
i have the english version, but i need the NL version.
thanks in advance !
it was on here :
http://rapidshare.de/files/35062662/OrangeRom_Original_Dutch.rar
but not anymore !
EDIT :
seems its not on any ftp.
I have seen a qtek NL rom ... that would be aweome too ...
EDIT 2 :
trying this one...
http://www.qtek.nl/S200_updates.asp
Dane_sober said:
Does anybody have this rom ?
i have the english version, but i need the NL version.
thanks in advance !
Click to expand...
Click to collapse
Unless it's here: http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs or on the Orange NL site, you'll have some trouble finding it...
bah
the qtek version wont install ( wrong vendor ID )
is there a way to CID unlock G4 models ????
Dane_sober said:
bah
the qtek version wont install ( wrong vendor ID )
is there a way to CID unlock G4 models ????
Click to expand...
Click to collapse
HardSPL/SoftSPL will. (I'd recommend SoftSPL as an official ROM will overwrite the SPL any way).
I tried softSPL and had some errors in the pop-up command box.
I'll try again tomorrow.
Dane_sober said:
I tried softSPL and had some errors in the pop-up command box.
I'll try again tomorrow.
Click to expand...
Click to collapse
If all else fails, I'd suggest unpacking the ROM download file (right click on your PC and select "UnZip/UnPack here") and then copy the nk.nbf file from that into a folder with the "NEW" RUUs and flash it as though it were a new WM6.1 ROM (including the Hard/Soft SPL)...
I tried that ( also with prophet tools ) but it didnt work for me :S
I'll try later and post the updates here.
Thanks for thinking with me !
Dane_sober said:
I tried that ( also with prophet tools ) but it didnt work for me :S
I'll try later and post the updates here.
Thanks for thinking with me !
Click to expand...
Click to collapse
Can your device boot up? (is it stuck in bootloader?)
I managed to install a wm 6.1 rom
sucessfully
Thanks l3v5y !!!
But still no dice with TOMTOM NAVIGATOR 6
the program hangs after the splash, but when I boot without the SD card, it says no maps found. So there might be a conflict on the SD.
TTN 7 does not work either ( just tried to install the diamond .cab to see if it worked)
But the prophet device is not compatible.
Sillyness is that is used to work perfect.
I'm going to try to find a solution for this, if else I'll FW-down back to WM5 or 6.
Which is a bit more familiar for the original owner.