Hello to everyone, I'm new on the forum, and I hope this is the right section to my problem:
I have installed Vito Astronavigator 2.02 on my ppc, but this program don't find my gps, and in the software there are no option to choose the com port.
I've a Qtek 2020 with wm6 (tofclock, I don't know what it is), and my gps is an Holux 236 bluetooth.
I thank everyone who can help, hello!
GPS Test
Hi
Use GPS Test (attached) to find out whether or not you can get GPS data. If you can then it is the software you need to configure. If not, then you will need to configure the port your phone receives the GPS data from. Have a go at that and post how you get on. From memory you need to set up a Bluetooth Serial Port to your GPS device in the bluetooth settings and then mirror this port in the GPS settings.
Cheers
andrew-in-woking
Hi, thanks to the answer. I use the gps bluetooth for tom tom, and it works well, so I think that the problem is in the software. I've configured my qtek to use the com port5, but in astronavigator there are no option to choose the port! However now I try to use your program and later I'll do know to you. Thanks hello!
gps test
Hello, I've used yuor program, this is the results (attached).
Means that it works, right?
new test
I've tried again gps test, this is the result (attached)
qtek2020wm6 said:
Hello to everyone, I'm new on the forum, and I hope this is the right section to my problem:
I have installed Vito Astronavigator 2.02 on my ppc, but this program don't find my gps, and in the software there are no option to choose the com port.
I've a Qtek 2020 with wm6 (tofclock, I don't know what it is), and my gps is an Holux 236 bluetooth.
I thank everyone who can help, hello!
Click to expand...
Click to collapse
RTFM It's all in there ....
Dirk
Thanks to everybody, now astronavigator works fine, thank you very much to andrew-in-woking and to dirlan2001!!!
I also have the same problem, can tell me how to fix it ?
But I can use GPS for the astronavigator Version 1. !!
Thanks!
Related
I am not able to use the receiver with Autoroute 2004(pocket streets). The manual suggests that I ensure a virtual COM port is established before connecting the receiver, which I am not able to get around. I am lost and stuck with an expensive receiver. Can some help, please? ASAP
Daz, when you try to run the program does it give the option to choose your gps/com port?
no, nothing came up on the screen. Fortunately I have been able to resolve the problem. Need to disable to incoming beam option in connection setting
I currently have the same problem with rakaline 6031-x7 and tomtom navigator. I use to connect the gps reciever via blutooth manager as slave and then set it up in tomtom on my ipaq. now I can't find any options in bluetooth settings on my xda2. Any chance of a little help?
:?
gavcha, the xda2 is braindead where bluetooth is concerned, are you running the latest gps 2.09 from tomtom? If you are using that and it still isnt working, download towas patch, remove the gps from the bonding on your bluetooth, install towas patch, run tomtom wizard, gps manager in discoverable mode, add device in bt manager by choosing "new", choose the gps, ok everything, towas patch should then come up and give you the serial option, choose that. When finished go to tomtom gps, choose tomtom bluetooth and in the second drop down your gps should be available, choose that and it should work.
Cheers mate. me being the impatient ba£$%rd that I am found this site
http://bluetooth.i-networx.de/index_e.html
Very usefull, up and running in no time. Seems to be in the same vein as your suggestion. Thanks for all your help I am slowly getting use to this xda milarky! Finaly I can sell the Ipaq!!!!
Cheers again.
Good to know it works, when O2 release the update it should get better, by the way that link you posted has been a pain in the ass for me, I have clicked that link in numerous posts and NEVER been able to connect, I have the patch now but does anybody else have problems linking to the above link.?
yeah i had problems going back to it when i was checking it to put it in my last post. try googling xda2 bluetooth manager. thats what took me to another forum with the link to this. worth a try. :idea:
Previously i had TomTom3.0 with BTHTools and a Holux BT GR230 GPS
and it worked fine.
I recently upgraded to ROM 1.72.00 WWE so i no longer needed BTHTools and it still works fine.
EXCEPT : When the GPS receiver is not found (BT turned off or GPS off or out of range), TomTom freezes or slows down terribly. This didn't happened with my previous rom/BTHTools)
upgraded to TT Navigator 3.03 and TT GPS 3.03 but that didn't help.
I found others reporting the same problem in other threads,( see Kim71 in http://forum.xda-developers.com/viewtopic.php?t=3341&start=350 ) but this specific problem was lost in the mainstream of those threads.
anything usefull will be greatly appreciated
The only way I found to get over this was to deselect the gps in tomtom before closing down each time, it would then need selecting if you wish to use bluetooth gps. If this wasnt done and bluetooth gps was switched off when starting tomtom the pda would slow to a crawl, I know it isnt a perfect fix but seemed to work ok for me.
the problem is you have selected the wrong com port in the gps setting (i have 3 to choose from on mine!) first uncheck the box on the left. then drop the menu and select 'bluetooth gps'. Then turn on the receiver and the check the box again
that should sort it.
Regards
The Pilgrim
Right now i have NMEA 0183V2 Bluetooth / COM5:
Tried to uncheck : OK
Tried choosing Bluetooth GPS : OK
Tried to check : NOK it simply will not check :?
is the reciever switched on?
As I have posted earlier in other threads and other sites, I have the exact same issue.
However there seem to be people that have got it to work without any extras installed.
Only port to get TomTom to work with my DConnex DC-230 (=rebadged Holux GR-230) is COM5.
I cant tick the blue box with 'Bluetooth GPS' in the lower combo=box.
To get by for now by I digged into the registry.
I created 2 CAB's that do the following:
Set the registry value of TomTom GPS to enabled or disabled.
By starting one of these CAB's I can easily enable of disable the GPS. Would be nice to have a Today Plugin that toggles the TomTom GPS Enabled value (any volunteers???)
BUT I see this solution only as a work-around.
The solution MUST be in selecting 'Bluetooth GPS' instead of 'COM5'.
The task is to find out on how to achieve that.
Any help appreciated.
Hi
i still have rom 1.66.00wwe. and BTTools installed
i run the latest tt gps v3.3 (?) and a fortuna bt clipon.
I can check the box with 'bluetooth gps' without any problems.
You might want to visit www.pocketgps.co.uk
The forums are excellant
i hope this is of use
Regards
The Pilgrim
Pilgrim,
I allready noticed the excellent forums on pocketgps.co.uk, but until now I only got the advise to select Bluetooth GPS instead of COM5. And that is just what is not possible with my 1.72 rom . . .
:idea: Like I said: any suggestions are more than welcom, as is an offer to creat a small program (Today plugin!) that toggles the Enabled registry value of TomTom GPS.
If anyone wants to write that pgm, he might consider simultaneously turning bluetooth on / off.
State 1 : Bluetooth on / TT GPS enabled
State 2 : Bluetooth off / TT GPS Disabled
even better: Make that configurable (via registry setting or whatever lean & mean) for both states
I have been investigating this annoying issue with "ronald2oo2".
He does not have any issues like we do with his 1.72.00WWE ROM.
We did notice some interesting differences between his and my device-behaviour. Also the registry settings between him and me are quite different.
The biggest difference between the two devices is the origin of the OS rom. He uses the iMate based rom, I use the Qtek based rom.
Could anyone with 1.72.00WWE OS ROM, BT GPS and TT3 please post:
1. If (s)he has the possibility of checking the blue--ish box in TomTom GPS when the post is set to 'Bluetooth GPS': YES / NO and with what protocol (NMEA, SiRF, GPS specific)
2. What the origin of the 1.72.00WWE (OS!) rom is: QTEK, IMATE, T_MOBILE beta, . ....
I experienced the same problem for several months now and hoped that it would dissapear when I upgraded to TT3.07 and TT GPS 3.07 but it still didn't work.
Then I came across this post and started playing myself with these settings and found a solution. I can now use TomTom Navigator 3.07 with a bluetooth connection with my Rikaline 6030 GPS receiver
I have a Qtek 2020 with 1.72.00WWE OS ROM and Rikaline 6030 BT GPS and TT3.07
I was able to check the blue-ish checkbox with Bluetooth GPS setting after choosing 'NMEA 0183v2 Bluetooth' in the drop down list above 'Bluetooth GPS' and after unchecking 'Outbound COM port: COM5' in my Bleutooth Settings (Start -> Settings -> System).
I hope I am helping a lot of people who have the same problem as I did for months and didn't find a solution for it.
Cheers,
Gino
The sentence: 'I can now use TomTom Navigator 3.07 with a bluetooth connection with my Rikaline 6030 GPS receiver' should read 'I can now use TomTom Navigator 3.07 with a bluetooth connection without my Rikaline 6030 GPS receiver'
Or without bluetooth turned on at all. Sorry for the confusion. Must be getting tired
Gino
Did you have to delete the existing bonds?
Because i tried your solution and it still won't let me choose "Bluetooth GPS". Am i doing something wrong? or is it some else different between our xdaII?
I don't know exactly where the bluetooth drivers come from. Can you check if you have OEM_WWE_04071402.sa.CAB in your ExtROM?
or another OEM_WWE_04???????.sa.CAB.
No I didn't have to remove the existing bond(s). I just first unchecked the Outbound COM5 setting in Bluetooth settings, then I removed the checkmark in the GPS Settings so I could select the NMEA 0183v2 Bluetooth option and then I selected Bluetooth GPS. Checked the check box again and closed all open windows and everything was working fine with or without bluetooth/GPS receiver .
Regarding your other question, where can I find this info about the OEM_WWE_04??????.sa.CAB file. I remember looking in the extROM but I forgot where to find it. I'll do a quick search to see if I can find it again.
Cheers,
Gino
you have to install extendedromunlocker
http://forum.xda-developers.com/viewtopic.php?t=8422&highlight=extendedromunlocker
and then unhide it, and then you would be able to see what's in there.
I also have OEM_WWE_04071402.sa.CAB in my ExtROM. I remember that my Bluetooth connection was not turned on when I tried to change the settings.
Gino
I have Radio version 1.14.00. Is this different from your version? I see that in your profile you pur 1.12.00 but I have noticed that 1.14.00 is not available.
I allready heard from 'ronald2oo2' that he is able to choose the Bluetooth GPS 'port' in TomTom GPS. I went thru all the options with him but still I cant select the 'Bluetooth GPS'. Also TomTom could not provide me with an answer, they eventualy offered to test my MDAII, but thats not an option since I rely on my MDAII.
BUT: I ams till using TomTom GPS 3.03. I will try the update tomorrow since maybe this version has some changes specific for Himalaya . . .
Hello,
I've the following problem. I've a MDA Pro with WM6. It's a german Maxstegi 4.7, but I tried 2 differnt ROMs from your board but my problem persists.
Bluetooth is activated and working. This I checked with a Siemens HHB-750 A2DP Audiotransmitter. Then I tried to connect my i747
http://www.transystem.com.tw/p-gps-iblue747.htm
and googlemaps, wififofum and Tomtom can't find it, regardless of every combination of settings in external GPS and Bluetooth. The funny thing is that Navigon detected the GPS on COM1: serial cable but wasn't running because of memory problems. I checked the gps mouse with my laptop and it's running fine.
My question now: Has anyone this gps running on a Universal with WM6 or does anyone know about problems with the bluetooth stack and how to correct it, or which GPS via Bluetooth works somewhere with Tomtom?
Thanks
Alsaya
I have 727 and universall and WM6.0 (but french FLA242). no problme just have to do partenership and open a com port (for tomtom and universal it's com4. uncheck secure connect
@stephane.papin
Hello Stephane, I tried com4 with and without external GPS - no success. Secure connection is unchecked. Any more suggestions, please.
Alsaya
I've Radio 1.17. Is Bluetooth a function of radio? Will 1.18 help?
Thanks
Alsaya
hello ...
I have a polaris with windows mobile 6.1 ptg (official), and each time that I configure the gps settings are not saved...
when you enter in "definitions">"System">"external GPS".
After entering the software gps port to "COM4" and then I set the the gps hardware port to "com7" (for example) and speed of the port to "115200", after I click "ok" to save the settings back to come and see that the software GPS port "COM4" and the hardware gps port in set to "(none)" and speed of transmission is in "4800" ...
will be some flaw in the Windows registry? I tried again to install the windows mobile and radio but remains the same ...
that someone help me
sorry my english
Mine does the same as your's, however with the built in GPS reciever and set to automatically manage GPS, why would you need to worry about external GPS?
see this post: http://forum.xda-developers.com/showthread.php?t=330235
wviegas said:
hello ...
I have a polaris with windows mobile 6.1 ptg (official), and each time that I configure the gps settings are not saved...
when you enter in "definitions">"System">"external GPS".
After entering the software gps port to "COM4" and then I set the the gps hardware port to "com7" (for example) and speed of the port to "115200", after I click "ok" to save the settings back to come and see that the software GPS port "COM4" and the hardware gps port in set to "(none)" and speed of transmission is in "4800" ...
will be some flaw in the Windows registry? I tried again to install the windows mobile and radio but remains the same ...
that someone help me
sorry my english
Click to expand...
Click to collapse
i have ptg too..hello brother
what gps software are you using? try to use another
translating:
que gps as a utilizar? tenta utilizar outro..sim e ja agora pq externo?
my original tomtom is 6.033 and its built in on the rom wen i make a hard-reset... but i want to use tomtom7 and i cant get any signal or detect the internal gps because this problem... and i dont want to use tt 6.033 because i dont have activation code to use other tt6 maps...
EDIT:
i see this post
http://forum.xda-developers.com/showthread.php?t=330235
and this
http://www.modaco.com/content/kaiser-kaiser-modaco-com/258943/a-word-of-warning-re-gps-settings/
anf i have see a part of the problem...
"*** Warning! Do not change the external GPS setting!
You should see "external GPS" icon in the Settings->System, do not change anything there.
You might need to hard-reset your device..."
i make a hard reset on my polaris and go back to original tomtom 6.033 (8358), search on google and find a map activator do tomtom maps v660.1219 and worked fine to me!!! now i have "Mpas PT_ES v660.1219" and "Western Europe 660.1256" working fine and activated in my polaris
Tanks for the help guys!
hi,
im using mda compact(htc magician and 05 64mb rom cotulla ) i have tomtom 7 with new maps demo works great ,only problem is can not get tomtom to see my bluetooth gps!
(gps works with a program called sky traq only settings i needed to set up is find bluetooth device and then connects, picks satellites up in a split second )
my question is there a program that will tell me what port my gps device using? is there away maybe with a registry editor to find out what port tomtom 7 is using?and possibly if needed a program to see what com port my bt 541 gps device uses or needs??
bluetooth setting
do i pair(i imagine i need to so i have
secure connection tick or untick?
bt com port?
only have choice com 6 com 7!
what are the recommended settings in external gps ?
program port?
hardware port?
manage gps automatically do i tick or untick? i have tried lots of settings i got as far as seeing no gps device in tomtom but with satellites greyed out like its stuck but i cant remember settings i used
hope some one can help me out ?????thanks for taking the time to read my post