Database Info

After Stand-By Omapclock reset standard frequency:HELP!!

Hi,
I use Omapclock+MemMaid 1.6 for overclock (240Mhz) my Jamin,but
after StandBy the frequency return on standard value(180Mhz)!!
You can Help me??
Tank You
Hamleto

When you added the file to the "notification queue" did you put "the device woke up" in the "event" box? Though personally I would just use smartskey http://forum.xda-developers.com/viewtopic.php?t=41060&highlight=smartskey and set the speed in the ini file.

make sure your not running omapclock.exe of memory card, copy to windows and point all shortcuts to this.
Solved it for me.

I put Omapclock.exe in /windows and omaplock.lnk (frequency240Mhz) in /windows/startup but after standby the frequency return to 180Mhz and the link in notification queue there's not!!!
I follow this procedure:
1.) Copy the program to anywhere you like
(e.g. Program Files\OmapClock.exe) In Pocket PC
2.) Copy the file and paste shortcut to anywhere you like
(e.g. Windows\start menu\OmapClock) In Pocket PC (Must use shortcut)
3.) Connect your computer with ActiveSync, copy the shorcut file that store in Pocket PC to your computer.
4.) Use the Window XP software, "Notepad" to open the shortcut file >
Change the content to "\Program Files\OmapClock\OmapClock.exe" -clock 216 (Attention :-clock 216 means the speed of overclock is 216. Suggust you use 264 or below.)
5.) After make change the shortcut file, copy this file from computer to replace that shortcut file in the PDA.
6.) Open MemMaid program, select "Notification Queue"
(Second Icon that from left to right)
7.) click "Add" and select Program choose the shortcut file > select Event and choose "The device woke up" and click "Add"
8.) Select "Start Up Program" (Forth Icon that from left to right)
9.) click "Add", find the shortcut file.
10.) Close MemMaid 1.5 program and soft reset.
The problem is that the link in notification queue after standby are delete!
Help!!
Tanks

How 'bout if you go to the \Windows\startup folder, how many omapclock shortcut entries are there? seems to me you would be creating 2 if you first put in a shortcut manually and afterwards put another one in with memmaid, after you edit the shortcut and place it in the startup folder you should use memmaid only to set it to run "When the device woke up", as far as I remember you don't need to add another startup shortcut. I could be wrong. Try it out and post back, you seem to be doing everything correctly except for that, so let's hope it is only that and that you'll get it to work. Good luck!

masr1979 said:
How 'bout if you go to the \Windows\startup folder, how many omapclock shortcut entries are there? seems to me you would be creating 2 if you first put in a shortcut manually and afterwards put another one in with memmaid, after you edit the shortcut and place it in the startup folder you should use memmaid only to set it to run "When the device woke up", as far as I remember you don't need to add another startup shortcut. I could be wrong. Try it out and post back, you seem to be doing everything correctly except for that, so let's hope it is only that and that you'll get it to work. Good luck!
Click to expand...
Click to collapse
I have only one shortcut in MemMaid StartPrograms!
I have also try to locate shortcut in /windows,but the problem is the same:
AFTER SOFT RESET OMAPCLOCK'S NOTIFICATION QUEUE ARE DELETE IN MEMMAID and clock return to standard value

Well I've got two suggestions. 1- Delete all shortcuts, soft-reset your device, and repeat the process. Only this time place the shortcut in the \Windows\startup folder manually and only use memmaid to set it to "when de device woke up", soft-reset and verify. 2- download smartkey from http://forum.xda-developers.com/viewtopic.php?t=41060&highlight=smartskey place smartskey.exe and smartskey.ini in the same folder as you put omapclock.exe, before you do that though, you need to open up smartskey.ini with notepad and edit it. I'm not 100% sure smartskey is compatible with the prophet, but I don't see why not, read thru the thread a bit to make sure in any case, here is the part you need to edit
; set OMAPCLOCK to the clock if you want to use omapclock and automatically
; set the clock speed after wakeup, you should put OmapClock.exe in the same
; directory of smartskey.exe
; REMEMBER TO REMOVE ';' BEFORE THE LINE TO ENABLE IT
OMAPCLOCK=264 <------ Put your speed here and delete the semicolon ( ; ) hamleto, and of course delete this little line
;REMOVEDUPSDDAEMON=0
;STARTMENUMETHOD=0
;DUP=0
;DDOWN=0
;DRIGHT=0
;DLEFT=0
...........
Well again good luck, I'm at my wits end, but let me know if it worked out for you. Later!

How to check the o/c speed
How to check the speed after o/c? I check on setting the speed still same.
thanks

Help
I Have some problem, do you have a omapclock .
I put another rom ... go to 180 MHZ ...
My Phone is Opal , sorry if write here
Regwards
Nuno Rodrigues

Iphone Toturial

1. Windows XP
2. WinRAR
3. Microsoft ActiveSync 4.5 ...
http://www.download.com/ActiveSync/3000-2178_4-10714484.html?tag=lst-0-1
Now, download my iP***ne Mod Pack from Here.
Now This is Where it Begins
A. The Today Screen
1. Start by removing everything from your home screen.
*Settings>Today
*Remove everything from your Today Screen
2. Copy iPhone3B\Skin\Today Theme\black.tsk to your My Documents folder on your phone.
3. Go to Settings>Personal>Today and apply the theme.
B. Installing TxtMan
1. The cab is located in: iPhone3B\Programs\TxtMan\TxtMan.cab
2. Drag the Cab into the “My Documents” folder on your phone using sync software.
3. Navigate to the cab on your phone and install it onto your phone by clicking on it.
4. Navigate to the Windows\Startup directory on your phone and delete the “TxtMan.ink”
C. Installing Slide2Unlock
1. The cab is located in: iPhone3B\Programs\Slide2Unlock\Slide2Unlock1.17-WM5.cab
2. Drag the Cab into the “My Documents” folder on your phone using sync software.
3. Navigate to the cab on your phone and install it onto your phone by clicking on it.
4. After software is installed, go to: iPhone3B\Programs\Slide2Unlock\Slide2Unlock Patch\ on your PC and copy slide.exe to: \Program Files\Slide2Unlock on your PDA replacing the old file.
D. Installing the .NET Framework
1. The cab is located in: iPhone3B\Programs\NetFramework\netframework.cab
2. Drag the Cab into the “My Documents” folder on your phone using sync software.
3. Navigate to the cab on your phone and install it onto your phone by clicking on it.
4. You must restart your device to complete the installation. Hit ok.
E. Installing Google Maps
1. Use your built in web browser, Internet Explorer, to navigate to: www.google.com/gmm
2. Select “Download Google Maps”
3. Select “Open File after Download”
F: Installing Weather Watcher
1. The cab is located in: iPhone3B\Programs\WeatherWatcher\WWM105.cab
2. Drag the Cab into the “My Documents” folder on your phone using sync software.
3. Navigate to the cab on your phone and install it onto your phone by clicking on it.
G. Installing rLToday
1. The cab is located in: iPhone3B\Skin\rlToday\rlToday.cab
2. Drag the Cab into the “My Documents” folder on your phone using sync software.
3. Navigate to the cab on your phone and install it onto your phone by clicking on it.
4. Now there is an iPhone folder on the rlToday directory. Copy the entire folder to: YourPhone\Program Files\rlToday\Themes
5. rlToday should now be on the home screen. Click and hold on the home screen until an “Option” button appears. Click on it.
6. Select iPhone as your skin.
7. Select Applications Tab and delete all current applications that are there.
G. Installing Wisbar Advance 2
1. The cab is located in: iPhone3B\Skin\Wisbar Advance 2\WisbarAdvance2.cab
2. Drag the Cab into the “My Documents” folder on your phone using sync software.
3. Navigate to the cab on your phone and install it onto your phone by clicking on it.
4. Copy the the included theme (entire folder) from: iPhone\Skin\Wisbar Advance 2\iPhone to the Wisbar themes folder in: \Program Files\Lakeridge\Wisbar Advance\
5. Go to Start>Programs>Wisbar Advance and open up the settings. Apply the theme and exit out of the settings manager.
H. Installing iContacts (The Flick-to-Scroll Contacts)
1. The cab is located in: iPhone3B\Programs\iContacts\iContact.cab
2. Drag the Cab into the “My Documents” folder on your phone using sync software.
3. Navigate to the cab on your phone and install it onto your phone by clicking on it.
*Note: This only works with contacts on your phone. So if you have any contacts on your sim, move them to your phone.
I. Revoming the Toggle Keys
1. The cab is located in: iPhone3B\Skin\VJToggleToday\VJToggleToday.cab
2. Drag the Cab into the “My Documents” folder on your phone using sync software.
3. Navigate to the cab on your phone and install it onto your phone by clicking on it.
4. Do a soft reset to see results.
J. Removing the System Tray
1. The cab is located in: iPhone3B\Programs\TrayDisplay\Tray.cab
2. Drag the Cab into the “My Documents” folder on your phone using sync software.
3. Navigate to the cab on your phone and install it onto your phone by clicking on it.
4. Click on Start Menu and Choose Hide Tray.
K. Installing the Dialer
1. The cab is located in: iPhone3B\Skin\Dialpad\iphone.cab
2. Drag the Cab into the “My Documents” folder on your phone using sync software.
3. Navigate to the cab on your phone and install it onto your phone by clicking on it.
4. You must restart your device to complete the installation. Hit ok.
L. Customizing the Home Screen
1. On your Today Screem, click and hold on the home screen until an “Option” button appears. Click on it.
2. Select Applications Tab.
3. Now, create a new set of applications in the exact order as the following:
*Note: Don’t type this in, navigate and select the files.
* SMS
Program: \Program Files\TxtMan\TxtMan.exe
Icon: \Program Files\rlToday\Themes\iPhone\blank.png,
* Photos
Program: \Windows\pimg.exe
Icon: \Program Files\rlToday\Themes\iPhone\l_photo.png
* Camera
Program: \Windows\Camera.exe
Icon: \Program Files\rlToday\Themes\iPhone\rl_cam.png
* Calculator
Program: \Program Files\gCalc\gCalc.exe
Icon: \Program Files\rlToday\Themes\iPhone\rl_cal.png
* Finder
Program: \Windows\fexplore.exe
Icon: \Program Files\rlToday\Themes\iPhone\rl_finder.png
* Maps
Program: \Program Files\GoogleMaps\GoogleMaps.exe
Icon: \Program Files\rlToday\Themes\iPhone\
* Weather
Program: \Program Files\Weather Watcher\WeatherWatcher.exe
Icon: \Program Files\rlToday\Themes\iPhone\
* Lock
Program: \Program Files\Slide2Unlock\slide.exe
Icon: \Program Files\rlToday\Themes\iPhone\
* Word
Program: \Windows\pword.exe
Icon: \Program Files\rlToday\Themes\iPhone\
* Excel
Program: \Windows\pxl.exe
Icon: \Program Files\rlToday\Themes\iPhone\
* Phone
Program: \Program Files\iContacts\iContacts.exe
Icon: \Program Files\rlToday\Themes\iPhone\blank.png
* Mail
Program: \Windows\tmail.exe
Icon: \Program Files\rlToday\Themes\iPhone\rl_mail.png
* Navigator
Program: \Windows\iexplore.exe
Icon: \Program Files\rlToday\Themes\iPhone\rl_navi.png
* Media
Program: \Windows\wmplayer.exe
Icon: \Program Files\rlToday\Themes\iPhone\rl_ipod.png
M. Windows Media Player iPod Skin
1. Navigate to: iPhone\Skin\WMPlayer\uPod
2. Copy all files to: \Program Files\Windows Media Player\ on your phone.
3. Open Windows Media Player and goto options
4. Choose Skins TAB.
5. Windows Media Player will automatically search for skins. Choose the iPod one.
N. The Final Tweak
1. Goto: iPhone3B\Skin\Background\
2. Copy tdywater_240_320.gif to: \Windows\
3. Confirm replace file
*Note: To see the Windows folder in your activesync explorer, you need to click choose View>Show All Files

no dl link :-(
can we have some pics?

icezar said:
no dl link :-(
can we have some pics?
Click to expand...
Click to collapse
You will find plenty of pics in the ORIGINAL articles which he has stolen, cut & pasted and now claimed as his own.
http://hackaddict.blogspot.com/2007/06/tutorial-iphone-windows-mobile-skin.html

sry i dont have any pics put i put it on mine it worked has everything

no my friend gave this to me i just posted it

cujo316 said:
no my friend gave this to me i just posted it
Click to expand...
Click to collapse
Yes and you didn't even manage to do THAT right since you didnt include the IPHONE mod pack thats needed.
To anyone that actually wants to TRY this, the article I posted has links to all the software as well as two methods you can use to accomplish it including one method that doesn't required that you use PIRATED software to accomplish it.

famewolf said:
Yes and you didn't even manage to do THAT right since you didnt include the IPHONE mod pack thats needed.
To anyone that actually wants to TRY this, the article I posted has links to all the software as well as two methods you can use to accomplish it including one method that doesn't required that you use PIRATED software to accomplish it.
Click to expand...
Click to collapse
fllllllllllllllllamed lol

Thanks Cujo, you rock man! (just kidding...)

How do you do it again?
/search

how do you do what

I dont think he's realized he totally ripped someone's work off... =P

cujo316 needs to be banned or at least banned from posting for a couple of months so he can read up, learn some things, and quit being an idiotic thief.

I'm being serious though, he honestly hasn't realized it.

I was being sarcastic. It's pretty simple. If you're on this forum, you aren't here by accident. And you're other places as well. I'm suprised someone else hasn't tried to take credit for the iMDA.
If you're going to steal the work, at least get the topic spelling correct. Jeez.

I got this running the hard way...works nice.
I ran into one issue. my mail works, but I can no longer tell which account I am in. it used to put the mailbox name in the title menu, and now it show "inbox" no matter what account I am in.
does anyone know how to fix that?

Maybe it's a nice idea to implement all these steps into a pre-cooked ROM? Anybody who can do this with a clean WM6-rom for example?

Maartuhh said:
Maybe it's a nice idea to implement all these steps into a pre-cooked ROM? Anybody who can do this with a clean WM6-rom for example?
Click to expand...
Click to collapse
that would be
well AMAZING
trying now, it says i should have a my midlet folder under my documents but i dont have such a folder. hmm

cool keep us updated

wow. thats a lot of work. my rom is pretty slow coz it has a memory leak and so i thought I would try this on before i reflashed the phone to a different rom. it takes me on average, 25 to 40 seconds to access my windows folder. setting up the applications was a pain. is there any way someone could make a cab file or an installer of this? it would make everyones life a loooot easier. excellent mod though. who needs an iPhone? the wizard rocks!!!

slod said:
I'm being serious though, he honestly hasn't realized it.
Click to expand...
Click to collapse
yeah the fact he said he got the post from his friend and he just cut and pasted it here. Really shows he didnt realize it. Maybe you just didnt realize it?

Help with adding icon/link to files

OKay I know windows but mobile Windows got me....
Have files and program on a memory card, and I want to create a shortcut/link to that file ...how in the hell do I do that.
I want to be able to start my program from say the start menu and going to programs and seeing my icon there...
Is there a tool or registery hack for mobile 6 that might do this?
Thanks

Use either the built in file explorer or something like Resco file explorer,go to the file or exe. you want to make a shortcut of and click and hold your stylus on it,when you get the menu choose "copy",now go to your Windows,Start menu,Programs,scroll to the bottom of the page and click and hold your stylus,choose" create shortcut" from the dropdown menu,you have your shortcut.

wm programs or folder from softkey

Hello guys,
I've been searching a lot, yet could not find the answer.
I would like to be able to open either programs (meaning path start/programs) or just a specific folder from softkey or hardware key.
Is there any way to open the specified folder. Do I need to create a shortcut to this folder? I have tried something like /fexplore.exe /My Documents (which works) but I would need to be able to open them not in list view yet as the programs do apear.
Is there any specific command to at least run the programs, where I would just click the specific folder?
Thank you in advance,
tampiss

I guess a workaround would be a similar apporach to your, /fexplore.exe /My Documents (which works).
Find a file manger that will display in icon view, rather than list, or details... then make a shortcut using that.
Any ideas?
Resco Explorer look promising,
http://www.resco.net/pocketpc/explorer/indepth.asp

Total Commander CE does an Icon View.
Now... does it respond to command line switches, so I can get it to start in a specified folder?

managing program folders

I am flabbergasted: I can't find a way to manage the folders in Programs. How do I create an application sub folder and how do I move applications into it? This should be intuitive but I just don't find it. Thanks for your help

Using a file explorer (I use Resco), navigate to Windows>Start Manu>Programs. Then Menu>New Folder. You can then move or copy shortcuts as you wish. If you're going to be doing a lot of this, you can also just do it from your PC via Activesync>Exlplore or by using a remote control program like Pocket Controller.

thanks emesbe, but I probably wasn't clear: what I am trying to manage is the icons in "Programs" (e.g. Media, Tools, Games...). How do I move applications in or out? How do I create a new folder of applications?

We may be ships passing in the night here, but I think the answer I gave you is what you are looking for. "Programs" is in the Start Menu subdirectory in Windows. You can rename, move or create new folders in Programs and then put whatever shortcuts you want into them.

It took me a while to figure out what you meant. I still find the process very unintuitive. But thanks a lot

Consider Using A PC
If you have a PC configured with Activesync, why not use it to make the changes. It's a lot easier using a mouse and keyboard, and the familiar Windows interface over Resco or Total Commander.
If you don't want to sync your Fuze to the PC, that's OK, just click cancel on the first PC popup, and you can still "explore" the device from your PC.
Then, from the Activesync window on the PC, click explore, navigate to Windows (takes a while to load) / Start Menu, and move things around to your heart's content using your mouse.
Some files or folders may be marked read only or system. You can sometimes change this from the PC using right-click/properties. Sometimes, you will need to use Resco or TC from the device to change these attributes, but you can then drag/drop from the PC.