Hi there,
I bought a Qtek S200 and I tried to do a ROM upgrade. I followed the instructions given in the website http://kimpeacocke.blogspot.com/2006/06/how-to-perform-rom-upgrade-on-your-i.html
I got the upgrade from this site at ftp://xda:[email protected]_022021_Dopod_PDAMobizEdition_v101.zip
I followed the procedure given in the website given above. After I upgraded successfully the phone has become locked in the boot loader screen. I have done both soft reset and hard reset. Nothing works. The phone gets locked in the boot loader screen. Need help.
Thanks,
Julian
Try to reflash with Qtek ROM instead...
Why you said that it's locked on the Bootloader screen?
Is it frozen or locked?
Hi Rayan,
I tried flashing with the Qtek ROM. I cannot active sync as it does not connect to the device. So I cannot flash. As soon as I powerup, I get the Qtek screen and then it goes to the bootloader screen and stays there. Nothing else happens. I have sent the device back to the guy from whom I bought it.
I got the same problem as Julian - I tried to upgrade with the mentioned ROM and now my device are stucked at the boot screen :?
Some help here ? I'm in same situation
I have an O2 with Dopod rom, after I instaled some software I must to restart and then my O2 are stucked/frozen on Windows Mobile splash screen
Only if I remove the battery I can stop the pda.
I can't do nothing to make him to start. Some ideea ?
:shock:
Later Edit :
solved with http://forum.xda-developers.com/viewtopic.php?t=49298&sid=35f5c1e9e165997b4634ea0c7700ac76
Same issue here with a O2 Xda Neo with German Rom.
Applied the procedure of the prophet wiki : How to CID unlock and Upgrade your Prophet (SPL 2.09 & 2.15)
After step 6 and a soft rest it is stuck in bootloader and will not do anything else, not even off or hard reset...battey has to be removed in order to shut it off....
Any ideas?
Remind me to find the guy who wrote the wiki page on unlocking CID in Prophet......good job pal......
Aaaaarggghhhh %^*^%*^%*^%*
Problem solved..
Hi everyone,
Good news at last. I sent my Qtek S200 to the guy from whom I bought the phone. He fixed it and now I am a happy man. You can check with him if everything else fails. Email him at E gadget Depot ( [email protected]).
All the best..
i tried to upgrade my QTEK S200 with this RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip it got to 95% and then it gives me nbf file cannot work with your PDA. Please help.
I have this problem too, i know only one exit from this situation - i have flash my s200 with RUU_215737_2157135_023021_QTEK_s200_RUS ROM, now it work fine.
you find it her
bootloader issue
I have the same problem too, If anybody know method to fix this problem please help us.
I cannot active sync as it does not connect to the device. So I cannot flash. As soon as I powerup, I get the Qtek screen and then it goes to the bootloader screen and stays there.
THX in advance for you help
Robert
have same prob but solved thanx to this post
http://forum.xda-developers.com/viewtopic.php?t=58892&highlight=boot
and remember First off all, to enter in Boot Loader Mode is:
Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.
Then upgrade using a ROM
Please, the links to the solution does not exists anymore.
I need help!!
Qtek S200 stuck in tri-color screen, all flashing so far still does not make it work..
When doing a hard reset I get format failed.
/Jonas
I have same problem!
Anyone can help?
TJSM said:
I have same problem!
Anyone can help?
Click to expand...
Click to collapse
Go to HMA4's upgrade guide or my thread in my signature...
same problem
i have exactly same problem and i couldnt solve it too.So can someone help us?
Please someone explain completely what should we do.
i can not active sync and waiting on the bootloader screen
bacardilima said:
have same prob but solved thanx to this post
http://forum.xda-developers.com/viewtopic.php?t=58892&highlight=boot
and remember First off all, to enter in Boot Loader Mode is:
Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.
Then upgrade using a ROM
Click to expand...
Click to collapse
daelee,
you can get normal state, follow the bolded attention at above quote.after entering the 3 colour screen connect USB and you can load the original WM5 ROM on your device. after that, upgrade to any wm6 by the rules and active sync.
the link is dead on that message..
i went to the that page and the link for solution is dead.
http://forum.xda-developers.com/showthread.php?t=376561
find out is there anything that can help!
Hey guys ive been trying to fix my problem for hours and cant seem to figure out what is wrong. I try to flash and get stuck at 1% the the connection is lost apparently. Im stuck on bootloader with:
KAIS1*0 MFG
SPL-1.0 OliPof
CPLD-8
I am trying to restore my ATT Tilt to factory settings again using RUU_Kaiser_CINGULAR_WWE_ . I can get back to the OS using MTTY but it doesnt help the same crap keeps happening. Ive also tried to use HardSPL with no luck. Im new to flashing this phone so I may have screwed up somewhere. Any help would be appreciated. Thanks in advance.
PS - When "Updating rom" screen ( the % bar) pops up after the device goes to bootload the usb connection is lost for some reason during most rom flashes... any ideas?
Hi All,
Pls help me on this issue. I am using Spl3.56 to flash my kaiser rom and i encounter the following issue:
I am able to reach the stage of tri-color and also the 0%-100% screen but later an error message appear and this occurs many times.
anyone can help me solve this
And the error message is...?
Have you read the Wiki, etc...?
hello guys
my magician is stuck/freeze while i was installing cotullo rom wwe R1.
the phone is stuck in bootloader mode. No hard resetting is working. i also tried to go back to original rom 1.12, which i got from clubimate.com, but it still no working, same error coming.
bootloder version is 1.02 . i am using vista but windows mobile device center is not picking the phone. what should i do????
please help guys. i am worried.
now i want to go back to original settings. help guys. waiting for responses.
please help guys...
me counting on you
Hi guys,
My Imate SP5 is stuck at the first screen where the IMATE logo (clubimate.com) comes up and then it does proceed any further ....and after about a minute it becomes blank.
I tried to do a hard reset but even that ended up in the blue screen .
I got it into the bootloader mode and tried to load a fresh rom . However the tera term pro says that it cannot open the device.
I am stuck at this point and cant proceed further ...
Please help
Farhan
Did you disable USB in Active Sync?