Ok, a question that needs answering that has popped up in my mind from time to time is about resolution.
#1. If a person buys a Asus P565, or Touch Diamond with 640x480 VGA res display, will the games and programs that used to run in 320x240 on my TYTN res be now a small square on the screen?
#2. Or again, If a person buys a Sony Xperia X1 or the Asus P835 (Glaxy 7) and is running a program that used to run on a 320x240 display but now it is running on the Xperia that has a 800x480 will it be in a small square, or will it be full screen and all distorted, will it be cut off on the sides, what happens?
Basically, what happens? Will everything be screwed?
The answer to the problem?
Doesn't anyone know what will happen?
there r some apps which are auto resolution or use force mode.Also there are few progs developed here by the developers for resolving the resolution.So no need to b panicky
HEHEEHH
I was actually a little nervous, so when you wrote panicky i laughed ehehheeh.. Thank man!
Problem with my resolution.
I am having a problem running some games and apps that were designed for 320x240 rez, now that I have a device running at 640x480. Does anyone know what is available that could help me?
Related
Hi there,
I was watching yesterday a divx movie (320 X 240) using Coreplayer on my new IPAQ 614c.
1) I was surprised to see kind of stripes (evidenced in the black background (top right panel), see attached file). I have to say that I do not have this pattern on other devices (tested on a Dell and Eten PPC) using the same software and movie.
2) Changing the color profile (to native) helped. So is it the reason for this difference observed an other devices.
3) This does not happen for all movies. As such, some other movies (also in 640X480) just run very nicely. Therefore, I believe this has nothing to do with the hardware.
Do U also experience this?
Any feedback appreciated
Nobody?
Thanks
never heard about or seen the issue but then i dont watch movies really on my device
but in TCPMP the free version of coreplayer one can choose different drivers for play back i if i were you would try and see if changing the driver in coreplayer had any effect
I watched wanted on my Athena (VGA) on a plane last week and it was fine, no jaggediness, or black lines, and that is a pretty dark film too.
Rory
I've watched a few TV episodes and some Bourne, really good quality though. Only thing I'm trying to work out is the A/V offset.
Thanks for the answers...
I will try to play with the drivers.
Anyway, I was looking at the same episode in 640X480 and had no black line at all...
So strange
Looks like it is better choosing IntelXScale as a driver...
Also the benckmarks are better with these drivers...
Will put later this afternoon the different benchmarks.
Thanks again
Discussion over
I do not know why but I did not have IntelXscale selected (I think I was playing a bit too much with the options).
Anyway, the problem is solved now using this driver.
Also, a benchmark with the well-known Matrix trailer (640X352, Bitrate: 127 kb/s) gives nice results:
DirectDraw: 94.93%
IntelXscale: 216.58%
GDI: 106.57%
i just got the new coreplayer and it only shows the tytn2 driver..
is this better or is there somewere i could get this interxscale driver?
just playd a video that comes allong with the xperia, as a video sample
benchmark results were
Average speed 62,50%
Original data rate = 922 kbit/s
Bench. data rate = 576 kbit/s
maybe the IntelXscale dont show up because you dont have an intel xscale cpu
but an qualcomm ?
I have done a quick search here and on google and found a couple of apps that are freeware that allow to force a certain resolution downwards from the native resolution.
This is my issue. I have a couple of old apps that come from WM2003 times that where specifically written for QVGA and on there they don't look right. Is there a registry hack or any software out there that will force the screen to display 240x320 by default.
I know this is kinda silly to run the phone in a lesser resolution it was designed to do, but I hope someone might have a solution to this?
Thx
I think there was an app for switching between 640x480 (VGA) 480x800 and 480x480, but not for lower resos im afraid
Hey,
I copy three resolutions of an image to my surface: 6099x4066, 1152x768 and 1366x911
The full resolution picture is not as sharp as the other two pictures. Why? Also if I zoom in and zoom out in the full resolution picture, the image looks horrible. I need to go to the overview and then click on the picture again to the it normal (but not so sharp). Whats the problem?
I want to convert my photos to a tablet resolution but 768px is to small for the future and the full resolutions makes problems now.
Best regards,
neon
Hi, I dont have one and was just trolling on this section of the Forum as I was thinking of buying one, but it might be due to the picture having to resize and optimize to fit the screen? It might be but its just a guess.
Ok, but the other versions must also be resized and ony the really big version has this problem.
It could be because the Big one has to either decompress or compress to fit, can remember which. >.<
Hi !
Is the 2560x1080 21/9 sceen resolution compatible with the nvidia shield tablet and the futur shield console?
I'd like to know before buying it..
Thanks
Nobody knows about that?
I'm not sure what you mean. Are you plugging it in to an external monitor with that resolution or trying to play video at that resolution? Either should work, though on the monitor you're likely to get a 1920x1080 image with black columns on the sides. If anyone has tested it, it would be good to know. The kernel source may also show if the device would natively support that resolution vs just sending out 1920x1080.
Exactly what I want to know, if we will have the black columns on the sides or the full screen without loosing the image quality.
It would be good if the 2560x1080 is fully supported or other 21/9 format, now there is a lot of choice with 1080p, 2k screen.
Has anyone got the answer to this question?
fabjazz said:
Hi !
Is the 2560x1080 21/9 sceen resolution compatible with the nvidia shield tablet and the futur shield console?
I'd like to know before buying it..
Thanks
Click to expand...
Click to collapse
I did some testing a while back, some pics here: https://twitter.com/ACharLuk/status/863033689873186817 and https://twitter.com/ACharLuk/status/863034904065572868
I had to tinker with adb wm.size settings to get it working and put the TV/monitor in zoom mode. I don't think there is a "plug & play" method, so you can do the same as me.
Run "adb shell wm.size 2560x1080" through adb and tinker with your monitor settings, hope you get it working
Sorry: Ignore. I posted this in wrong thread.
Hi guys. I have a Sony Xperia Z5 Premium phone with a 4k display. This display is potentially awesome for VR apps. But its down to the apps/games to use the display.
What I want is to determine what PPI or resolution an app is running in. Is there a way I can do this? Maybe an overlay app or script available such as those FPS benchmark utilities. (I could have used such a utility but unfortunately, I havent seent any that display the actual resolution.
Thanks