Heya guys,
I'm having some major issues with the default ms bt stack in regards to connecting my dell bh200 stereo bluetooth headset. I can connect to it to play stereo music but it refuses to pick up calls, the moment a call comes it, it disconnects itself immediately. I'm wondering if this is an issue with the MS stack. Is there a way for me to change the bt stack into widcomm's or something like that? anyways, drop a message if you know something. thankyou very much!
I'm having a bit of trouble with the bluetooth on my unit as well. Are you able to send files to your device using a bluetooth dongle on your PC? or files from other phones to your Touch Pro?
hi i'm trying to pair my bluetooth headset (Samsung WEP200) but everytime i put the pin number (that is given by the bluetooth headset) it always said "Your Device did not connect with Samsung WEP200. The connection Failed or the passcode is incorrect".
how to install the hotfix (the hot fix from HTC website) on my HTC Touch Pro? everytime i copy the .exe file into my device, and run it, i always got an error box. Incorrect Device, "Please use the correct Device to Install This Hotfix program!" i don't know how it happen, i download this from HTC support page. i select the phone (HTC Touch Pro) and in the "Software Download" tab it show that there are 3 available download, the Hotfix, the Rom and Application.
i really need help....... pls, someone that have the same proble with theit HTC Touch Pro bluetooth connection.....
I can send files to my PC, the bluetooth connection in general is ok, but when it comes to having the the stereo bt headset to pick up a call, it freaks out and the headset turns itself off. any ideas on that?
/bump to page one for help
what do you mean bump to page 1 for help?? i post a thread before, but no one help me to solve the problem... i'm really frustrating to paired my bkuetooth headset.... =(
i just wish people who have the same problem and already solve it can help me....
what I mean is that you need to stop posting help me replies to every single post there is about bluetooth in effort to get others to help you rather than the original poster. what it also means is that stalking every bt related post and copy/pasting your problems for the same reason (as mentioned above) is also pretty rude. if you would like help, make a thread or search for it while having a separate thread.
there are people on xda that are well versed in wm6.1, but it's a matter of being lucky enough to have them notice it or happen to have one that knows about this stuff deciding to help.
p.s if you need help w a specific issue, start a thread, not derail it for your own personal benefit please.
p.p.s i'm not trying to be a jerk, it may sound like it but i'm not in the mood to be one
Are there any other bt stack options for wm6.1 or am I short out of luck?
Pushhh to page one.
Related
In reviewing the forums, I am unable to find a "straight" answer (at least one I can understand), about whether *ANY* BT headset with caller ID will fully work with the XDA II (or in my case, the IMATE PPC).
My configuration:
Imate PPC (XDA II)
ROM: 1.72.00WWE (3/15/04)
Radio: 1.14.00
Protocol: 1337.24
ExtROM: 1.72.800
I am running Pocket Bluetooth Tools V1012 (also tried 1100).
Can anyone tell me if the Sony-Ericsson HBH-660 or any other caller-ID enabled BT headset will properly display the caller number and/or name with the above hardware/software profile?
I know for sure that the Jabra BT800 will NOT. The headset works (actually, works great... good reception!), but the caller ID does not work.
Thanks in advance!
-Kevin.
Hi,
There are many ways to get the Bluetooth with Caller ID works on the PPC. The trick is that the Caller ID needs a Hands Free profile, which is not standard in the PPC. After using one of these ways, you will end up having the the caller number only appears, but no names. If this is what you want, I can tell you how it could be done.
Hi Waladany,
Yes, I would be very interested in knowing how to get it to work. A number (without name), is perfectly acceptable. I still have the Jabra BT800 headset for about 6 more days before I must return it for a refund, so I can use it to test.
Thanks in advance.
-Kevin.
Jabra BT800 and Caller ID and XDAII WM2003SE
I would also be VERY interested in how to get this to work... Thx...
Ok Guys, here are what i got.
You have two ways:
1- Install the merged rom made by sin (you can find it in the forum), as it includes the bluetooth fix. ( This is what I tried)
2-a- Install the Bluetooth Handsfree fix, I will attach it for you. After installing both updates, you should try to bond with the Headset. you should be receiving the message telling you that this is a Hands Free Device (Yes or No). You better say yes. If you said No, another message pop up twice asking if it is a Handset Device.
2-b- As a test, if you already have the headset bonded, you can go to the devices screen in bluetooth. Click and hold on the device, you should see a shortcut menu with the option "set as Hand Free". Try to select and test the Hands Free
waladany said:
1- Install the merged rom made by sin (you can find it in the forum), as it includes the bluetooth fix. ( This is what I tried)
Click to expand...
Click to collapse
I have the merged ROM by Sin, but still experience the same microphone issues. The CallerID works great, but the microphone on the headset is not active. Both the speaker and microphone on the XDA-II are operating.
waladany said:
2-a- Install the Bluetooth Handsfree fix, I will attach it for you. After installing both updates, you should try to bond with the Headset. you should be receiving the message telling you that this is a Hands Free Device (Yes or No). You better say yes. If you said No, another message pop up twice asking if it is a Handset Device.
Click to expand...
Click to collapse
Are you referring to the registry fix? I think that just makes you able to select hands-free at all. It doesn't fix the microphone problem.
The only thing I've heard that works is the 2.20 Chinese version. But I'm pretty happy with the Sin version. I wish we could find a quick fix for it.
If I've missed a new BT fix from Sin, please post the link here.
Thanks
bt
no way no how will BT CID work fully on even 2.20!! It sucks.
On 2005 it works FLAWLESSLY. But there are bugs on 2005, lack of mem, contacts and email database are new so will not work with many third party software, etc.
Even if you add the reg key "HadsfreeProfileOn", (Sins fix), or have any BT stack or even pray to the bluetooth God, your ****ed on 2.02 - 2.06.
2.20 is ****ty.. If I receive another call while using handsfree, even if I do not answer it, I loose all sound and mic ON BOTH until I click on Tools, Hands free off and then again tools hands free on.
Sometimes the mic - duel speaker things comes back and you have to reboot.
I wrote more here http://forum.xda-developers.com/vie...ghlight=&sid=a355793d319af7acb15784f153f9d7f1
Also, stay posted here, http://forum.xda-developers.com/viewtopic.php?t=19128 we may get help.
Hi there,
I have recently upgraded my Himalaya device to WM5 but just found out yesterday that the audio does not go via the carkit, but just uses the internal speaker.
With the 2003 version, all audio (music, TomTom, phone) went through the carkit to the external speaker. Now, with the same carkit, only the phone audio goes via the external speaker.
I use the pro-install active carkit, together with a GPS receiver attached to it.
Anyone have any info to get this working again?
Thanx.
Same problem here only with a different wayfinder (I use Alturion)
The support of Alturion told me to use WM2003 but that's not I want to.
Hi,
I have been searching for a solution to this for some time.
After several posts arround the place, i have this ducsision going on at buzzdev forum hopfully we will be able to help.
PLEASE come and join us there, and help with our investigation into the problem
http://buzzdev.net/component/option,com_simpleboard/Itemid,108/func,view/id,17740/catid,26/
this is the thread that i hope will come up with a solution when the "cleaver" guys get started...
the more people with car kits that can help the faster this might get resolved....
Acuum
ps sorry rushed post before leaving work, so no spell check.
[sum peeple kant spel butt i kan]
Hi if someone can help me it would be much appreciated. I just bought a Touch Pro and everything is working fine....except for one really annoying issue.
Whenever I connect my bluetooth to a headset, it shows connected but no sound is coming out. The sound is muted. when connected to my Audi, I see that the phone has bars (shows connected and I can dial the phone), but when I make a call no sound. Similarly on my SE HBH-DS970 headset. The A2DP works perfectly, but when I make a call nothing.....I've searched google and through XDA and no solution.
Can someone suggest a solution? I've soft/hard reset the device already. If I should change Radio ROM which one would someone suggest that's stable? Thanks
If no one else has this problem, can anyone at least suggest to me if this sounds like a Hardware or software issue? If hardware I will return it, but if software I will try to find a solution. Like I said the phone connects to BT, but I just can't get handsfree to work. File transfers and A2DP work. Thanks
Just flashed to UK ROM and still no help....I've read some people having the same problems over at the Diamond thread...I'm the only one answering my own thread here hahaha....if anyone can help I'd greatly appreciate it. Thanks.
Hi,
I occasionally had such an issue with my Parrot CK3100, but I did not get the time yet to investigate further. After the call was connected I did not hear anything, and I am not sure whether the other party could hear me.
On another day, the handsfree was working perfectly OK.
Cheers
Michael
Thanks for replying Michael....I'm at a loss and I tried all the suggestions posted. I hope it's a software issue...I'm going to buy a bluetooth headset tomorrow and see if that works. It's not the end of the world, but annoying since all my ppc, s60, BB, and UIQ phones prior to the TP have not had any such issues.
Do you think it's a software issue?
have you tried playing music?
Yes.....A2DP works perfectly....no problems whatsoever with file transfers either....I'm guessing either it's a software problem or the phone has a new bluetooth software that's not agreeing with my older SE headset, but the car is another issue. The Car is 2007 and I'm sure the Bluetooth software is not that old. I've tried Euro WWE and Asian WWE ROM and no go.....I'm going to try the Cingular ROM and see what happens.
Just another quick update....I tried 2 other different bluetooth headsets and still the same problem... for some reason the sound for handsfree will not come through...anyone know of registry hack possibly that will allow sound to come through?
May not be entirely related to your problem...
Mine is worst...whenever I have paired my Jabra or iTech BT headset, when the phone rings, 8/10 times the phone will auto pickup (and no I did not setup the phone to auto pickup) and the it will NOT connect to the bluetooth. Instead it will be just like an auto pickup and the sound will come thru the phone headset. This is driving me nuts!!!!
I have a SonyEricsson HCB-150 bluetooth carkit in use with my G1. The carkit has a special function with text to speech. So it can speak the name out when somebody calls and it can also access your phonebook of your mobile. The phonebook-function is compatible with most of the new Sony Ericssons. I tried it with a Samsung I900 and it works also, but with my G1 it doesn't work.
So my question is, can someone modify or is it possible to change some settings that I can use it with my G1.
Thanks in advance!!
Your bluetooth carkit is probably using something other than just the basic handset/headset protocall. Since bluetooth on the G1 is extremely basic right now you will have to wait till they get the other protocalls coded (A2DP, etc.).
Dharkaron said:
Your bluetooth carkit is probably using something other than just the basic handset/headset protocall. Since bluetooth on the G1 is extremely basic right now you will have to wait till they get the other protocalls coded (A2DP, etc.).
Click to expand...
Click to collapse
so sad
thx for the answer anyway
M3 SMGII said:
I have a SonyEricsson HCB-150 bluetooth carkit in use with my G1. The carkit has a special function with text to speech. So it can speak the name out when somebody calls and it can also access your phonebook of your mobile. The phonebook-function is compatible with most of the new Sony Ericssons. I tried it with a Samsung I900 and it works also, but with my G1 it doesn't work.
So my question is, can someone modify or is it possible to change some settings that I can use it with my G1.
Thanks in advance!!
Click to expand...
Click to collapse
I'm in the same situation - the bluetooth will pair and momentarily connect with my bluetooth carkit - then it shows "loading..." on my car - then immediately disconnects.
If you get a fix on this - I'd appreciate knowing what it is too. thanks!
I am having multiple issues with Bluetooth on TouchPro2:
Issue # 1 with no solution
When trying to end calls using the end button of Jawbone Prime, it does not work, you must end call using the handset.
Issue # 2 (New)
When ending calls with any Bluetooth device (in my case built in Bluetooth in Nissan Altima) the calls will not terminate, have to press end button many time before calls ends
Are there any Bluetooth registry hacks that may solve either one of these issue?
golfman32 said:
I am having multiple issues with Bluetooth on TouchPro2:
Issue # 1 with no solution
When trying to end calls using the end button of Jawbone Prime, it does not work, you must end call using the handset.
Issue # 2 (New)
When ending calls with any Bluetooth device (in my case built in Bluetooth in Nissan Altima) the calls will not terminate, have to press end button many time before calls ends
Are there any Bluetooth registry hacks that may solve either one of these issue?
Click to expand...
Click to collapse
I see the same issue. Sorry no solution.
I confirm same end issue ....although until reading above i didnt know it stemed outside of the plagued nissan vehicles with navigation.
I have a lot of confidence that this will be fixed sooner rather than later since it is now affecting everyday bt headsets vs. one isolated group of nissan / infinity vehciles.
For those who own this phone and a nissan / infinity. we will take this partial victory as it has been a long two years since the last known phone from htc that worked correctly with our cars was a mogul with WM5 / before that the apache.
Its nice to have a working touchpro 2 and nissan ...even if its not 110% with the disconnect issue.
I have an 08 Nissan with the Bose/Communications/convenience package, and my bluetooth worked fine with my i760, xv6800, and Touch Pro. But I experience the disconnect issue as well now with my TP2. Must be the new HTC drivers.
We'll standby for a patch. But I'm pretty sure even though the time keeps running on the radio, that the call still disconnects. In any case, it isn't right, and I doubt we'll see it when we get patched to 6.5.
FYI, from my research this is the widcom stack on the TP2. I thought i read that in the tmobile TP2 forum.
That would explain why it works because microsoft rarely fixes things on windows mobile.
If so it only more confirms ms at fault and not nissan.
The nav radio was always different than the non nav bose radio in the nissans. Different BT modules i believe.
That would explain why you didnt have the problems that so many others did.
I might be wrong on the widcom stack but I woudl think the tmobile and cdma variety are using same chipsets and drivers. for the BT radio
BMW bluetooth
Same issues on BMW bluetooth
Having simmular problems with an JVC BT1 specielly if i use AD2P at the same time.. phone can lag for like 10-20-30 sec someethimes even more....
Getting VERY tired of this!
several BT issues
I seem to be having the same issue as most of the post on this thread ...my headset, and my Infiniti will not end my call , but has anyone else had a problem just trying to get the bluetooth to open from comm manager or settings ? When I try to turn on Bluetooth through my comm manager it says cant turn on bluetooth , and when I try trough settings it says cannot start the Blutooth stack ???? If i do a soft reset BT will work but if i disabale and try to connect again im having the same issue ....some one help me out
TP2 sprint
have exact same issue with my parrot MK6100
have to press end call many time on the remote to end the call sucessfully
Me too, also using Parrot 6100
The bluetooth is a nightmare. I have a Pioneer AVIC-F90BT with v3 software and I can't even answer the phone when it rings. I even sent to phone to automatically answer after 1 ring and when BT is connected it just freezes the dialer. Then when I hang up a call the phone freezes for about 20 seconds. It sucks so bad.
verizon tp2, jawbone prime.
from prime: I can initiate voicecalling. I can answer a call. I just cannot end a call from the headset.
I think the blue tooth issues are due to the locking of the fm raido they reside on the same chip they talk about this on ppcgeeks
I have issues with my Ford Sync as well. If bluetooth is on and I want to use the Sync system I have to turn off bluetooth then turn it back on to get it to work. Quite annoying. I never had any issues with my XV6800 so it must be the bluetooth radio in the phone. Hopefully they come out with an update or when 6.5 is out it gets fixed.
WITHOUT DOUBT THE BLUETOOTH on the TP2. I have the same issue with Parrot 3200. It may be that different drivers would help.
Anyone been brave enough to try anything else?
Ditto here, but I'll take it a step farther:
I'm using a Jawbone Prime with my Verizon Touch Pro2 and it's not only unable to end calls from the headset, but it will disconnect the headset at random in the middle of calls. The only way I figure it out is to pick up the phone when I can't hear anything, only to find the "headset disconnected, place the handset to your ear" message.
Annoying.
arche3 said:
verizon tp2, jawbone prime.
from prime: I can initiate voicecalling. I can answer a call. I just cannot end a call from the headset.
Click to expand...
Click to collapse
Same setup and results here, and additionally the redial last number feature is spotty at best.
When HardSPL comes out, I'm going to offer a bounty for $50 for whoever can get the MS stack working correctly on our devices with all profiles. Anyone else in with me?
Ohiowa said:
Ditto here, but I'll take it a step farther:
I'm using a Jawbone Prime with my Verizon Touch Pro2 and it's not only unable to end calls from the headset, but it will disconnect the headset at random in the middle of calls. The only way I figure it out is to pick up the phone when I can't hear anything, only to find the "headset disconnected, place the handset to your ear" message.
Annoying.
Click to expand...
Click to collapse
Seeing exact same random disconnect issue with my jawbone prime and my sprint touch pro 2. It happened twice today. One time I was speaking and didn't even realize it had happened for several minutes! Any fix for this?
I contacted HTC over this. The more people that complain about it to HTC, the quicker they will release a fix.
MS BT Stack on TP2
helix139 said:
Same setup and results here, and additionally the redial last number feature is spotty at best.
When HardSPL comes out, I'm going to offer a bounty for $50 for whoever can get the MS stack working correctly on our devices with all profiles. Anyone else in with me?
Click to expand...
Click to collapse
I am in. I need the MS stack for my wireless keyboard and mouse.