J dont think that it is posted here,so from Diamond forum the file below makes Raphael sounds louder.Test it to mine & works, BUT it's a little disorted (with .wav files j use) ,maybe someone with enough knowledge fix it.
Media player now its loud, havent test it in incoming ringtones or bluetooth.
It doesnt sound well when SRSWOW is on.
The problem is that there is not enough power available from the audio amplifier. This can't be corrected with software.
What this .cab does is probably that it tries to increase the amplification beoynd the capabilities of the device. This may make the sound seem louder, but as you have noticed, it also increases distortion. There is no workaround for the laws of physics...
So we are really really stuck with a very inferior product.
I installed SRSWOW but lost all sounds
illi said:
So we are really really stuck with a very inferior product.
I installed SRSWOW but lost all sounds
Click to expand...
Click to collapse
Did you change the dll file in the registry so that if points at the right one? Its been written a couple of times the the SRSWOW cab going about set the wrong values in the reg. So I think this should be an easy fix if you do a bit of searching. Try the Daimond forums.
Either this problem varies from device to device, or then Ijust dont understand how loud you guys need...
When my wife calls, she shouts so loud I even have to tone done volume
@WizP: I'll do a search for the fix.
@Taajuus: The sound must be decent enough....
Taajuus said:
Either this problem varies from device to device, or then Ijust dont understand how loud you guys need...
When my wife calls, she shouts so loud I even have to tone done volume
Click to expand...
Click to collapse
I have my volume set to the halfway mark. I'm talking about the conversation volume, only settable while in a call, not the system or ringer volumes.
Those that are reporting low volume, is it the ringer, system, or call volume you are complaining about? In other words, is it the front or the rear speaker that's producing low volume?
The ring volume is more than fine, it's just the speaker volume when in a call, when outsuide you can hardly hear it
Yes, I concur.
I've got my in call volume at maximum and you can still barely hear the other person.
Before you ask, I don't have a screen protector covering the earpiece.
I still wonder - I havent had any problems with incall voice. Can hear person very clearly even outside in traffic noise.
Could this really be single device problem, or maybe operator dependant?
With that audiopara file in my raphael (ROMeOS V.1.05) the speakerphone volume is now hugh,the music playback is loud, but a little disorted, but j think that there was no serious change in incoming ringtones (though j use only wav files-that are much louder from mp3's.
As far as the disortion a new modified audiopara file that suits well with Raphael should make the difference.
J will try some mods with SRSWOW..
Worked here... But the sound is VERY distorted..
Couldn't find a way around it with SRS (Tried treble reducer) and no luck.
I can´t even here when I´m talking to somebody, but I still have that plastic over the earpiece but still! There´s NO sound at all through it (well really really low), I have max volume, will it get better with the screenprotecter that doesn´t block the small speaker?
Mr.Sir said:
I can´t even here when I´m talking to somebody, but I still have that plastic over the earpiece but still! There´s NO sound at all through it (well really really low), I have max volume, will it get better with the screenprotecter that doesn´t block the small speaker?
Click to expand...
Click to collapse
REMOVE THAT. It's the same thing if I tried to yell to you with a wall in between us. Sound has difficulty traveling through a medium, specially a piece of plastic.
Dear Taajuus,
Could this really be single device problem
Click to expand...
Click to collapse
Well... yes sit can because:
1. There are several related problems that are not seen in all devices.
2. Not all Raphaels [Touch Pro] are the same model, make or version.
or maybe operator dependant
Click to expand...
Click to collapse
It can never be related to the operator because:
1. The operator's interaction with the device is the one of a comm carrier.
2. It's only possible influence would be with/thorough the radio, never the ROM.
3. The operator cannot directly interact with the hardware.
Cheers.
xenkato said:
J dont think that it is posted here,so from Diamond forum the file below makes Raphael sounds louder.Test it to mine & works, BUT it's a little disorted (with .wav files j use) ,maybe someone with enough knowledge fix it.
Media player now its loud, havent test it in incoming ringtones or bluetooth.
It doesnt sound well when SRSWOW is on.
Click to expand...
Click to collapse
how do you install this?
The sound is distored cause tripp modified the values of the gain but put it too high. If some one could put lower values it would be great. I tried but didn't manage . I also tried to put the values of the HTC NIKE but it resulted in a lower sound that the original one.
How to install audiopara (to 'ekerbuddyeker")
Get in /Windows,search for audiopara3.csv, MAKE A BACKUP, use resco exp. and copy the new audiopara to /Windows, soft reset and done.
xenkato said:
Get in /Windows,search for audiopara3.csv, MAKE A BACKUP, use resco exp. and copy the new audiopara to /Windows, soft reset and done.
Click to expand...
Click to collapse
Ah, so that's how you install it ololol better write this on the first post...
Well for me this file really fixed the sound of my device, specially the earspeaker!! Now I have to lower the system sound so I don't get deft
I recommend everyone to use it...
So do u actually mean that this cab file has increased the volume on a call or just the general sound???
Hi,
I'm using the default headset that came with Raphael. It is extremely loud - I need to set the music to the lowest level so it doesn't tear my ears apart.
Is there any way to make the quieter?
Hi all,
Exactly the same problem here!
Even if I put the music volume at 1% it's really too lourd.
The TouchFlo 3D embed music player is unusable as is...
Any registry hack to fix this?
Thanks
Try using the Advanced Config Tool (posted a couple places on this board). Scroll down to Touch Flow 3d sound settings and bump the volume all the way down to like 20 (i'm testing 10 right now, will update with how that goes).
Actually, 10 works very well. I'd keep it there...
Great! It works fine thanks
Bumped the "Music player volume" down to 20, but I left my earphones at home - will let you know how that works.
Strange.. because mine even set at 100 isn't quite loud..
Hey,
I have had a HTC Touch sins 5th of December and i have found a problem I'm not sure if anyone is aware but its quite annoying. The sound through headphones and even to the extent of through the speakers is very quite and I'm not sure what i can do to improve that. Is there some kind of update or something. I could understand the phone speaker being quite and i don't partiuclly mind that but when trying to use it to listen to music or watch a film i find i can't even make out what there saying.
I don't have bad hearing so it can't be that.
Thanks for any help you can provide in advance
Did you make sure that your device volume is turned up all the way? Also make sure that your media player volume is turned up all the way.
It may also be that the media files you are playing have very low volume. Compare this by playing these files on your computer - do you have to turn your computer speakers up high just to hear? this would confirm low sound right in media file.
Do you have wow or srswow or whatever it is called installed. I have heard others having problems with this installed on their devices. this could be the problem. Uninstaling did not work in their case and they had to perform a hard reset (possibly because it had changed registry settings) I don't know if there is any other explanation or solution to your problem. The only time I have ever experienced low sound volume was when my volume settings were set low and I forgot to turn them back up.
to my knowledge there's no way of increasing hardware volume..
you can amplify the media using Goldwave or something.. and check that the volume meter is up all the way both in your media player and on your device.
hi i ve searched this forum about this problem but no solution were found
like titel said, the sound of my touch pro is realy loud even with 1 bar...
is there a solution to lower the sound ?
i know with windows media player i can lower the sound to 5% but it use alots of battery, my phone will be empty in 4 or 5 hours..
so anyone help me ?
if you are looking for an mp3 player i use htc audio manager, should be able to find a .cab for this floating around. you can use its volume control in 5% increments while on lowest system volume increment. I had the same problem, losing my hearing heh.
Hey Guys,
what I am planing to do is to use my Topaz for navigation on my bike.
Generally it works as I want it to work but I have one problem left. The sound is not as loud as it should be.
What I did so far:
- Install TomTom 7 on my Topaz
- Install a bluetooth headset in my helmet
- Redirect system sound to BT headset via BTA
- Set system volume to max as well as TomTom volume
So far everthing works great but when I am riding my bike its pretty hard to understand anything. So I have to get the sound louder somehow.
The Tool AudioBooster just says "No Headset Connected" when I am trying to start it.
Any idea how I could boost the sound output via BT?
Greetz Topaza
Unzip attachment and copy to your Windows folder overwriting original and your max volume level will be increased.
BTW, this is a common question and solution is readily available with a simple google search. No need to open a new thread for this.
thanks for your reply. The file you provided increases the volume via. the Topaz speaker and via. (cable) headset a lot.
Unfortunately the sound via bluetooth stays the same or is increased a little but i cant recognice a difference...
any other ways?
topaza said:
thanks for your reply. The file you provided increases the volume via. the Topaz speaker and via. (cable) headset a lot.
Unfortunately the sound via bluetooth stays the same or is increased a little but i cant recognice a difference...
any other ways?
Click to expand...
Click to collapse
I don't use BT so I cannot confirm if it increases with this file but opening the .cvs show settings for BT, so I would assume it should increase BT as well.
I have an Extra loud one if you want to try it, however you will need to adjust your speakers to a lower level to avoid distortion.
Please let me know if you notice an increase in BT vol.
still cannot recognize any signifficant change in volume via BT
Thanks for the confirmation.
Personally I think BT allows for too much background noise and your best option would be earbuds to cancel excess noise...
Unless you're on a Harley, then there's no way to hear anything but your motor...
Sorry man...
damn, the idea was so great and everything works perfect except this ****ing BT headset - whose integration into the helmet was hard work btw...
There HAS to be a solution. Still don´t know how but i will get this thing working somehow...
Maybe I have to tune the hardware... a better speaker, a small amp or somewhat ^^
Anyway, if someone has an idea how to boost the sound, please let me know!