Need Help installizing themes - G1 Android Development

When i try installing the ubuntu or blue star theme it gets installed but when i boot up it gets stuck on the modified glowing boot screen
i tried reflashing it, wiped data even reflashed the whole system from the start RC29.nbh
So any idea why this happens and any solution ???

I believe in the original post on the Blue Star theme it states something about if this happens to pull the battery out, put it back in, boot into recovery and do a wipe (alt w) this will get the theme working.
Have you tried this yet?

Related

HELP- Stuck at splash, recovery is working, but does not detect sdcard

So im pretty much f-ed
i was running CynogenMod 4.2.9.1 with Darkstar theme
when i updated the bootscreen with Alternate Boot Screen Stericson Lockscreen Update 0.6.9 **** hit the fan.
first it booted until the bootscreen where it just went blank
after a few restarts it went from the bootscreen to black with errors popping up, basicly every app was forced closed.
is there a way that i can use to get the phone working again?
thks
Try different recovery versions and wait 1 min for the sd card to be detected.

Problem with RCMix3D KINGDOM v2.0 Evolutionary Sense! THE ORIGINAL SENSE 3.0 DHD ROM

I recently installed this ROM and I thought it was working fine. I did a restart of the device and now I seem stuck at a android screen that it doesn't see to be going pass. The android word just display as a light goes across the screen and then it seems to cycle again.
I can't seem to boot into recovery either to put restore the back up I made, because when I get to the white fast boot screen the selection won't scroll down to recovery when I hit the down volume button. It just stays there and then tries to install a patch for a radio I believe.
Any thoughts on why this is stuck at the android word screen or how I can get back to my back up and restore that. Thanks
verseman said:
I recently installed this ROM and I thought it was working fine. I did a restart of the device and now I seem stuck at a android screen that it doesn't see to be going pass. The android word just display as a light goes across the screen and then it seems to cycle again.
I can't seem to boot into recovery either to put restore the back up I made, because when I get to the white fast boot screen the selection won't scroll down to recovery when I hit the down volume button. It just stays there and then tries to install a patch for a radio I believe.
Any thoughts on why this is stuck at the android word screen or how I can get back to my back up and restore that. Thanks
Click to expand...
Click to collapse
Try removing your sd card and then vol down and power. Then once you're past fastboot white page pop it back in in time for recovery, and do your thing. Try clearing caches first. If not then restore a backup.
Sent from my Inspire 4G using Tapatalk
Yup I think I seen that in another forum to a similar type problem, I removed the SD card and was able to get back into clockwork recovery. I wipes all data/settings, cache partition and then loaded the rom again.
First thing I did was do a reboot so. So far it didn't get stuck and booted back up. Will do another reboot later tonight to see if it holds. Thanks for the tip
I'd reccomenf going to the dhd forum and getting the latest version (new one coming out soon)
Sent from my Desire HD using XDA App

[Q] bricked after install CM9 on xperia S ?

Hello There!
Being anything but an expert I carefully read instructions on how to unlock my SONY XPERIA S (LT26i) as I wanted to install CM9. This worked, but installing cm9 I f...ed up.... All seemed to go well, but after the final boot nothing happened, the screen stayed black.
When I try to unzip the file with cm9 from root again I get: 'installation aborted', '(status 7)' and the anouncement that the zip.file has an error in it.
If I try to start in normal mode (after a hard reset) i get freexperia logo for a short while, then the small led turns purple (i think) and the bottom, bar lights up for a sec or two. Then everything turns black again...
The led turns red all right when i try fastboot mode, but my computer no longer recognizes the phone.
Help me please!
Hey,
flash a new firmware with fastboot (up volume key + start button) at boot
VincentKnife said:
Hello There!
Being anything but an expert I carefully read instructions on how to unlock my SONY XPERIA S (LT26i) as I wanted to install CM9. This worked, but installing cm9 I f...ed up.... All seemed to go well, but after the final boot nothing happened, the screen stayed black.
When I try to unzip the file with cm9 from root again I get: 'installation aborted', '(status 7)' and the anouncement that the zip.file has an error in it.
If I try to start in normal mode (after a hard reset) i get freexperia logo for a short while, then the small led turns purple (i think) and the bottom, bar lights up for a sec or two. Then everything turns black again...
The led turns red all right when i try fastboot mode, but my computer no longer recognizes the phone.
Help me please!
Click to expand...
Click to collapse
Hello!
I have an identical problem. Is there a working version of [FXP117_update-cm-9.0.0-RC0-nozomi-UNOFFICIAL-signed.zip]? There appears to be no access to the phone's SD storage, so how do i flash it?
Have you tried wiping/flashing new firmware from windows, using for example Fastboot Commander? Maybe this will work
I had similar promlem with CM9 on my xperia pro. I solved it with total reinstall of phone. so I wiped cache, Dalvik cache, factory reset (through Clockwork recovery), flashed stock kernel, then stock firmware..after I saw, that phone is working and my heart slowed back to normal, i did the same steps, but with CM9 kernel and CM9 ROM and it is working like charm now..

[Q] boot logo issue after re-odex

Hi
Ive just "successfully " re-odexed themen JPU, but even all looks like properly done, I get boot logo issue :
I see Samsung logo in the middle of display as normally, but above this logo, there are another one blinking Samsung logo too
It wont happen before re-odex.
After I wiped dalvik cache it does not helped.So I tried make full reset at my phone , it rebooted and it looks like it was solved, but at next restart it happened again :-(
I had definitelly enough space at system folder (45 MB free) , no error message while re-odexing
I know there were some COOKING where I can change boot logo to a lot of nicer , but I am sure it worked upto JPS :cyclops:, not JPU :-(
any tips how to solve it ?
noone ? :crying::crying::crying::crying::crying::crying::crying::crying::crying:
ok, I tried delete stock bootanim file and replace it by bootanimation.zip, looks like working, but i will have to reboot phone moretimes to see if it is solved or not
That happened to me before, just delete "/system/media/bootani.qmg" or just change the bootanimation

P6200 bricked - but sometimes boots and CWM OK?

Hi guys,
Really sorry to ask about this but tearing my hair out!
I have a P6200 UK model. I installed CWM v6.0.1.0 and it worked fine. The intention was to install Galaxy ROM HD (build #06), so I downloaded it, put it on my SD card, and installed from CWM recovery. The install got stuck on "Flashing boot" - so after around 15 mins I reset it.
It went into a boot loop on the initial Samsung logo. Luckily I'd previously re-flashed stock HC with Odin (to cure a dead Wifi problem caused by, I think, an errant install of Busybox) so I did this again, rebooted, and the system came up, text started scrolling up the screen, followed by a red error message (see picture) and a reboot. I was then once again stuck on the initial Samsung Tab 7.0 Plus log. I repeated the process and it didn't even get past the Samsung logo.
So I thought I'd try the newly released ICS Rom (GT-P6200_ATO_P6200XXLQ1_P6200OXALQ1) - this seemed to install OK, then half booted, did some text type installation stuff with the blue Android, then rebooted again, finally getting stuck on the Samsung logo with blue pulsating behind it. It never gets any further than that.
I tried flashing HC back - same result as earlier. I can also reflash CWM and sometimes it works, sometimes it doesn't. It seems I've run out of options.
So - question is - where (if anywhere!) can I go from here?
Help greatly appreciated, many thanks!
have you tried a system wipe in cwm? if not do a system wipe and reflash HC using odin.. same thing happen to me 2 days ago.. I think something is up with HD rom

Categories

Resources