Related
Hi everybody
please test WM6 the fisrt for Universal. I tested but can't fix SMS Vibrate when we have a new message. Please fix to help me. Thanks.
[links removed by V]
__________________________________________________
RUMOUR CONTROL:
V speaking here:
Guys, the contents does appear to be Crossbow. I haven't flashed, just decompiled. However, it appears to be a custom rom, ie contains custom 3rd party apps like WM5NewMenu, so this isn't stock AFAIK.
It is a HTC branded rom.
However, the moderators have previously discussed, and given the increasing legal attention this board is getting, I've deleted it for the time being.
Please don't re-upload it without speaking to a moderator. This isn't about being clever, it's about staying legal.
Those who want it know who's got it.... [please don't PM me for a copy, I can't give it to you!]
It may be permitted, let me discuss with the other mods first.
PLEASE DO NOT UPLOAD OR LINK to this file for now.
This will be a bannable offence, 1 warning only
Also, please be aware.
There are crossbow roms out there that will permanently lock your phone radio and cause potential bricking. Use caution.
V
_______________________________________
15 January 2007 - 14:14:00: We have now let this rom be posted. Have fun. Contact an administrator if you want it removed!
V
just saw it by accident on ftp, and flashed my Qtek9000 with it. I didn't even now it was that for sure and took the plounge. LOL
What a nice surprise
Just after flashing I saw your post.
Looking at it now.
Thnx
Does this CB built, hv video call enable?
New Windows 6...Should we try it????
helmi_c said:
Does this CB built, hv video call enable?
Click to expand...
Click to collapse
Hi Helmi,
Please tell us we should try it....and it is not a mistake!!!!
Hello Helmi, Nice to meet u
helmi_c said:
Does this CB built, hv video call enable?
Click to expand...
Click to collapse
Helmi, please help me. Please fix all error of new rom. Thanks
iluainu said:
Helmi, please help me. Please fix all error of new rom. Thanks
Click to expand...
Click to collapse
moeaboelela said:
Hi Helmi,
Please tell us we should try it....and it is not a mistake!!!!
Click to expand...
Click to collapse
by the built this is a RTM version, so it should safe...but maybe this release is a earlier built... it wont do UMTS/3G, and a lot of registry missing, and a lot of bug....
We should not try it ....!!!
helmi_c said:
by the built this is a RTM version, so it should safe...but maybe this release is a earlier built... it wont do UMTS/3G, and a lot of registry missing, and a lot of bug....
Click to expand...
Click to collapse
So, we should not even try it huh????
I will switch my SIM from my Tytn back to my Qtek9000 to see if umts works
Please try to fix error Helmi
helmi_c said:
by the built this is a RTM version, so it should safe...but maybe this release is a earlier built... it wont do UMTS/3G, and a lot of registry missing, and a lot of bug....
Click to expand...
Click to collapse
Please help us. I expected only u.
Got 3G icon and its connecting (I'm on Tmobile NL).
I'm on the net now and it seems to work (FYI) (testing at home.versatel.nl/c.pootjes05/tvs.htm) watching de goudenkooi stream right now
A wizard version of WM6 is said to be unable to be reflashed to old versions(WM5), how about this one?
Any major problems!!
djslash said:
Got 3G icon and its connecting (I'm on Tmobile NL).
I'm on the net now and it seems to work (FYI) (testing at home.versatel.nl/c.pootjes05/tvs.htm) watching de goudenkooi stream right now
Click to expand...
Click to collapse
Any major problems!!
Guys, I've taken it off the ftp
Guys, the contents does appear to be Crossbow. I haven't flashed, just decompiled. However, it appears to be a custom rom, ie contains custom 3rd party apps like WM5NewMenu, so this isn't stock AFAIK.
It is a HTC branded rom.
However, the moderators have previously discussed, and given the increasing legal attention this board is getting, I've deleted it for the time being.
Please don't re-upload it without speaking to a moderator. This isn't about being clever, it's about staying legal.
Those who want it know who's got it....
It may be permitted, let me discuss with the other mods first.
V
GUYS - please be aware.
There are crossbow roms out there that will permanently lock your phone and cause potential bricking. Use caution.
hold on, I will try to reflash to wm5, let you know
djslash said:
hold on, I will try to reflash to wm5, let you know
Click to expand...
Click to collapse
Its safe..
Reflashing to an older ROM (Helmi for exemple) is indeed possible, and it does appear to be a self made ROM indeed (lots of apps)
Activesync 4.5 is needed to sync
NEWS????? WHERE THIS ROM???? i'm italian........
wow, theese informations sounds good! We are waiting for this
Can someone summarise what the main benefits of WM6 are on the Universal please?
ok guys, i don't know alot about HTC, i don't know that i can do more until i saw my friend's HTC. ok, i have keisar (8900 series), what i want do is:
"download the dual touch".
How can i go that? i saw the thread, and everytime i tried to download it , i would bring me to website (i don't know what).
please give me the link and things that i need to do or click.
by the way i have downloaded the hard-spl, something like that. thank you
steven
Try one of Duttys Rom... V3 or V4b(which should be out today)..
http://www.cinetsystems.com/xda/TouchFlo/
Avoid V4 32mb version and read the Wiki at hte bottom of my post
Make sure you install the hard-spl as well - just downloading it isn't enough .
Have a look at this thread:
http://forum.xda-developers.com/showthread.php?t=356895
Read up as much as you can before flashing so that you're sure you know what you're doing. It'll be more worthwhile than just flashing blind and then doing a lot of reading on how to fix your phone.
collinssc said:
Try one of Duttys Rom... V3 or V4b(which should be out today)..
http://www.cinetsystems.com/xda/TouchFlo/
Avoid V4 32mb version and read the Wiki at hte bottom of my post
Click to expand...
Click to collapse
the link doens't work. i got frustrated because i couldn't get into the link. i don't know what's going on. can you guys tell me. sorry, but i have been reading, and i got the link, but i couldn't get into the link to download the ROM. thank you for the help
njhtc said:
the link doens't work. i got frustrated because i couldn't get into the link. i don't know what's going on. can you guys tell me. sorry, but i have been reading, and i got the link, but i couldn't get into the link to download the ROM. thank you for the help
Click to expand...
Click to collapse
Dutty FTp has had some issues as of late try.... here
Hope this works better for you
collinssc said:
Dutty FTp has had some issues as of late try.... here
Hope this works better for you
Click to expand...
Click to collapse
i can download it and will try later on, thank u very much
any body, i have a question again....
if you read this collinssc, you might be able to help me.it seems that people ignore regular questions. i think they are tired of answering questions. i feel it.
question:
i have downloaded dutty's Rom, but teh problem is:
when i want to type "@" it becomes "!", and "=" becomes "*".
can anybody tell me what is the problem with this? it seems that everything is switched around....
thank you for everybody's help
njhtc
You need to disable the XT9 functionality. There is a CAB around here somewhere for it.
njhtc said:
any body, i have a question again....
if you read this collinssc, you might be able to help me.it seems that people ignore regular questions. i think they are tired of answering questions. i feel it.
question:
i have downloaded dutty's Rom, but teh problem is:
when i want to type "@" it becomes "!", and "=" becomes "*".
can anybody tell me what is the problem with this? it seems that everything is switched around....
thank you for everybody's help
njhtc
Click to expand...
Click to collapse
the reason everyone is tired of answering this question is because there is a search feature.
Here is the cab to install to disable the XT9.
http://forum.xda-developers.com/attachment.php?attachmentid=63520&d=1198925369
this rom is real!
i just flashed it!
i'm playing with it now to see what' the improvments and what' works and what' dont work.
http://forums.imate.com/m_2823/mpage_1/key_/tm.htm#2828
Does it work with USA versions with say... AT&T..?
there is a USA version of Imate 9502?
if u talking if internet works in USA, yes it works!
wm6.1 seems alot faster or maybe cus i havnt installed any other programs on it yet! haha
Ah, Ok, I meant to say unlocked version with the Telsa logo. Mine is fully unlocked with no carrier's attached but if it works in USA, who cares right! Very nice!!
damn! this is cool!
now there is a option for HSPA setting!!
Economy Mode (up to 3.6 Mbps)
and
Turbo Mode (up to 7.2Mbps)
thats great news!
is the original ROM available to reflash it, if needed?
I haven't found anything yet.
bommel0815 said:
thats great news!
is the original ROM available to reflash it, if needed?
I haven't found anything yet.
Click to expand...
Click to collapse
no original rom, but who need it!
everything just works on wm6.1, havnt find anything to complain yet!
Wow this is great news...but what about the 6150?
Any news on that?
netnerd, how can you say you won't need it after just a few days of usage.
also, i think about selling the device, and i am not sure potential buyers would be happy with a beta rom
About to flash mine now!
The official I-Mate Rom update is scheduled for mid-August. I hope they get the video drivers sorted properly (I hear this update makes little difference to video performance).
I bet the Flame users are excited aboutt he SDHC support. Hopefully some clever person will be able to use our ROM to help them out.
Well I've run into a problem installing already:
"SFX v2.0 can not support Windows Vista system"
what do I need to do?
mike freegan said:
"SFX v2.0 can not support Windows Vista system"
what do I need to do?
Click to expand...
Click to collapse
make your pc dual-boot! with XP and vista!
netnerd said:
this rom is real!
http://forums.imate.com/m_2823/mpage_1/key_/tm.htm#2828
Click to expand...
Click to collapse
The download link is now broken - can anyone point out an alternative or a repost?
mike freegan said:
Well I've run into a problem installing already:
"SFX v2.0 can not support Windows Vista system"
what do I need to do?
Click to expand...
Click to collapse
maybe you can use this to extract it?
http://www.downloadtopc.com/get/9/37589/File2Pack_SFX.html
Upgrade process started fine... at the final stage it says congratulation on the PC screen, but the device says EUM update fail: Please reconnect tp PC and run the upgrade again... Tried it again and msg changes to "Get Battery status fail"... Any clu.. Any way to use mtty?
is this different to the ROM found at http://forum.xda-developers.com/showthread.php?t=407336?
man2003 said:
Tried it again and msg changes to "Get Battery status fail"... Any clu.. Any way to use mtty?
Click to expand...
Click to collapse
I remember the upgrade required the battery to be at least 50% charged to begin - might wanna check your battery level & recharge.
imate 9502 original rom ?
hey guy s any one have the original rom i need to go back on 6.0 wm goes my phone is defective and i can t shipped to imate with 6.1 telstra firmware i m in canada thanks
It would be very nice to have the original ROM, as I-Mate does not provide it... I had the same problem with my device and now it's dead (Ok, It was already dead before, with all its problems)...
Isbrasil, have you tried switching to maintenance mode and reflash it?
Has anyone got this installed on there 6700 and working? Im using a 6.1 rom and cant get it to work. if so what rom are you using??
thank you!
gofawkurself said:
Has anyone got this installed on there 6700 and working? Im using a 6.1 rom and cant get it to work. if so what rom are you using??
thank you!
Click to expand...
Click to collapse
I had replied in the main thread, but it's getting a little crowded. I can't get it to work on mine either. I know that's not what you wanted to hear though.
I'm running LennySh 6.1 build 20273. I've tried installing update 7 several times, once after a hard reset. All it says each time is "Tap here to launch TouchFLO" and after taping it says "Launching TouchFLO" then it goes back to "Tap here to launch TouchFLO". Tried update 8 and I still get the same result.
same here, im trying the newest update later today. If anyone out there has this running on 6700 PLEASE tell us what rom your using k thx!
ARI
yea, i got that sneaky feeling it's got nothing to do with the updates and more with the outdated phone. I've seen a few 6700's on the main thread saying the same thing. and w all have different roms. I even flashed 6.0 to try and to no avail. so i went back to 6.1.
the mogul with the same hardware and ram has no problems though. bummer..
hmm, same hardware makes no senese
ari
Well if anyone tries cooking it in a rom. Let us know the out come..
gofawkurself said:
Well if anyone tries cooking it in a rom. Let us know the out come..
Click to expand...
Click to collapse
Did it yesterday, doesn't work. I also tried installing each of the 11 updates and 4 of the betas, none of them work on Apache w/ WM6.1
Man...I really thought it would work...installed the Omnia D2D driver and everything...even almost bricked the stinkin phone.
But, just like everyone else...Tap here to launch...over and over...nothing!
well thanks for everyone trying it out on there different roms. Atleast we know without a doubt that it will not work on our devices. Maybe its time to trade our old timers phones in and catch up with the rest of the world
http://www.truveo.com/PPC-6700-with-Windows-Mobile-61-and-TouchFlo/id/547185311
tis guy got it to work somehow.
minsk said:
http://www.truveo.com/PPC-6700-with-Windows-Mobile-61-and-TouchFlo/id/547185311
tis guy got it to work somehow.
Click to expand...
Click to collapse
dude that was just regular touchflo...
You guys need a proper ROM build that supports Manilla2d. Many of the more up to date phone forums(kaiser, hermes etc) are all using the latest builds. That's why you're getting screwed. Ask for a fresh build from a chef.
Macgyvec3 said:
You guys need a proper ROM build that supports Manilla2d. Many of the more up to date phone forums(kaiser, hermes etc) are all using the latest builds. That's why you're getting screwed. Ask for a fresh build from a chef.
Click to expand...
Click to collapse
Then what build should we be using? I have tried M2D on 19213, 19588, 19716, 20273, and 20748. It doesn't work on ANY of them.
add build 20755 to list
I also tried 20755 tried cooking it in ROM and installing after the fact nothing seems to work, at least cooking it gets the same results you are seeing the step by step approach however reveals to me that task manager is not installing on my appache
Got it working on my XV6700
Runs Flawless a little lag once and a while but other then that it rocks, i will post a video in a min but you need to download "[UPDATE 17]M2D 0.10 Files" that's the ones that worked for me http://forum.xda-developers.com/showthread.php?t=398173
DL-Link http://rs432.rapidshare.com/files/149290739/m2dinstall.rar
hey everyone,
i just updates my desire s with a new rom (not mentioning the name) and my phone is acting kinda crazy... as in the calls are not getting connected properly and half the time people complain they arent able to contact me either... the problem is im not much familiar about this stuff... bt, have a feeling it might be the problem with the radio. i tried restoring to older backups. no difference and realised that the radio doesnt get backed up.
i need help... does anyone know what to do about this...???
thank you in advance...
aji4032 said:
hey everyone,
i just updates my desire s with a new rom (not mentioning the name) and my phone is acting kinda crazy... as in the calls are not getting connected properly and half the time people complain they arent able to contact me either... the problem is im not much familiar about this stuff... bt, have a feeling it might be the problem with the radio. i tried restoring to older backups. no difference and realised that the radio doesnt get backed up.
i need help... does anyone know what to do about this...???
thank you in advance...
Click to expand...
Click to collapse
Relax.
And stop with the sad smileys...
The radio is not affected by a ROM flash, it is on a separate partition and you don't have to fiddle around with it if the problem has presented itself only after flashing a new ROM and was working alright previously.
Also, there is no disgrace in mentioning the ROM name, so please do tell us the following details:
Are you Revolutionary S-off or did you unlock using HTC Dev site?
What ROM are you currently using? Is this the first ROM you have flashed, coming from the stock one, or have you tried out other custom ROMs before this?
Let us know the answers to the above questions and we'll try our best to help.
Yeah, please tell us the name of the ROM, we'll be able to give you better help. Some AOSP ROMs (Oxygen, BlackICE) have calling issues. Also, as enimaamit said, a ROM does not change the Radio, it needs to be flashed separately (something i don't recommend you do). The problem is probably in the ROM
shrome99 said:
Yeah, please tell us the name of the ROM, we'll be able to give you better help. Some AOSP ROMs (Oxygen, BlackICE) have calling issues. Also, as enimaamit said, a ROM does not change the Radio, it needs to be flashed separately (something i don't recommend you do). The problem is probably in the ROM
Click to expand...
Click to collapse
Yup. And thanks for that additional bit of info about Oxygen and BlackIce.
And another possibility is that this could be his first custom ROM (based on an official Sense ROM), and he might be coming from a stock ROM which he just unlocked using HTC Dev, so the kernel could still be stock... (if he didn't flash boot.img separately), and this might be allowing him to boot, but causing other issues like the one he just described.... I have an uncanny feeling that might be it!
I don't know, just letting loose the Sherlock inside
well, this wasnt my first custom rom... i have flashed from stock rom->cm nightly builds->oxygen->icecream sandwich 4.0 alpha builds to the current wp 7.0.4 rom by mmmcfc... i used to use his previous version-wp7.0.2 which was awesome and gave me no problems but, ever since i updated it, i have been having this problem. i tried flashing back to other roms as well and still kinda the same issue. and im on revolutionary s-off...
hope these answers are helpful... thanks for the reply guys...
EDIT: also, i used to have similar issues when i was in the stock rom at the very beginning which got solved later when i recieved an official update...i.e. before i s-off'd my phone...
aji4032 said:
well, this wasnt my first custom rom... i have flashed from stock rom->cm nightly builds->oxygen->icecream sandwich 4.0 alpha builds to the current wp 7.0.4 rom by mmmcfc... i used to use his previous version-wp7.0.2 which was awesome and gave me no problems but, ever since i updated it, i have been having this problem. i tried flashing back to other roms as well and still kinda the same issue. and im on revolutionary s-off...
hope these answers are helpful... thanks for the reply guys...
Click to expand...
Click to collapse
He He He... guess i'm not much of a sleuth then!!
Are you sure the call drop issue is not a network provider problem {since it is happening on other ROMs as well, and it wasn't there before (your radio has been the same all along BTW)}
Have you tried putting your SIM in a basic phone and trying out whether the problem persists....this could indicate a network problem. I remember a few months ago Airtel service had gone to the dogs and everyone on Airtel (especially in Delhi) was writhing in agony...
Secondly, try using another carrier's SIM card in your DS and see if the problem still persists...
sry...i think u got me wrong der... i used to face the same problem on stock rom while i purchased the phone but, after updating it,it was pretty much and i never faced any problems until now. and i dont think its the carriers problem as im able to use the same sim card on a basic phone without any issues... and other users on the same carrier around me aint facing any problems with the network either... so, i guess im pretty much stuck and back to square one... :S