this rom is real!
i just flashed it!
i'm playing with it now to see what' the improvments and what' works and what' dont work.
http://forums.imate.com/m_2823/mpage_1/key_/tm.htm#2828
Does it work with USA versions with say... AT&T..?
there is a USA version of Imate 9502?
if u talking if internet works in USA, yes it works!
wm6.1 seems alot faster or maybe cus i havnt installed any other programs on it yet! haha
Ah, Ok, I meant to say unlocked version with the Telsa logo. Mine is fully unlocked with no carrier's attached but if it works in USA, who cares right! Very nice!!
damn! this is cool!
now there is a option for HSPA setting!!
Economy Mode (up to 3.6 Mbps)
and
Turbo Mode (up to 7.2Mbps)
thats great news!
is the original ROM available to reflash it, if needed?
I haven't found anything yet.
bommel0815 said:
thats great news!
is the original ROM available to reflash it, if needed?
I haven't found anything yet.
Click to expand...
Click to collapse
no original rom, but who need it!
everything just works on wm6.1, havnt find anything to complain yet!
Wow this is great news...but what about the 6150?
Any news on that?
netnerd, how can you say you won't need it after just a few days of usage.
also, i think about selling the device, and i am not sure potential buyers would be happy with a beta rom
About to flash mine now!
The official I-Mate Rom update is scheduled for mid-August. I hope they get the video drivers sorted properly (I hear this update makes little difference to video performance).
I bet the Flame users are excited aboutt he SDHC support. Hopefully some clever person will be able to use our ROM to help them out.
Well I've run into a problem installing already:
"SFX v2.0 can not support Windows Vista system"
what do I need to do?
mike freegan said:
"SFX v2.0 can not support Windows Vista system"
what do I need to do?
Click to expand...
Click to collapse
make your pc dual-boot! with XP and vista!
netnerd said:
this rom is real!
http://forums.imate.com/m_2823/mpage_1/key_/tm.htm#2828
Click to expand...
Click to collapse
The download link is now broken - can anyone point out an alternative or a repost?
mike freegan said:
Well I've run into a problem installing already:
"SFX v2.0 can not support Windows Vista system"
what do I need to do?
Click to expand...
Click to collapse
maybe you can use this to extract it?
http://www.downloadtopc.com/get/9/37589/File2Pack_SFX.html
Upgrade process started fine... at the final stage it says congratulation on the PC screen, but the device says EUM update fail: Please reconnect tp PC and run the upgrade again... Tried it again and msg changes to "Get Battery status fail"... Any clu.. Any way to use mtty?
is this different to the ROM found at http://forum.xda-developers.com/showthread.php?t=407336?
man2003 said:
Tried it again and msg changes to "Get Battery status fail"... Any clu.. Any way to use mtty?
Click to expand...
Click to collapse
I remember the upgrade required the battery to be at least 50% charged to begin - might wanna check your battery level & recharge.
imate 9502 original rom ?
hey guy s any one have the original rom i need to go back on 6.0 wm goes my phone is defective and i can t shipped to imate with 6.1 telstra firmware i m in canada thanks
It would be very nice to have the original ROM, as I-Mate does not provide it... I had the same problem with my device and now it's dead (Ok, It was already dead before, with all its problems)...
Isbrasil, have you tried switching to maintenance mode and reflash it?
Related
http://www.pdamobiz.com/show_news.asp?NewsID=72203&PN=1
Because downloads are slow as hell at pdamobiz, I'll post this later on the xda-developers FTP.
If somebody could translate, it would be nice *waves to chan*
Update:
I've uploaded them onto the FTP site here.
AKU 2.3
ftp://xda:[email protected]/PDAMobiz_Prophet_WM5AKU2.3_v2320.rar
AKU 3.2
ftp://xda:[email protected]/PDAMobiz_Prophet_WM5AKU3.2_v3220.rar
Jesterz said:
http://www.pdamobiz.com/show_news.asp?NewsID=72203&PN=1
Because downloads are slow as hell at pdamobiz, I'll post this later on the xda-developers FTP.
If somebody could translate, it would be nice *waves to chan*
Click to expand...
Click to collapse
Where I can download "clean" FINAL AKU3.2?
pdamobiz really do overfill what could be a good rom with junk.
is it all in the ext rom or built into the actual rom itself?
Omg.
Whay a nice rom.
Waiting for uploading on our ftp
dannyoneill said:
pdamobiz really do overfill what could be a good rom with junk.
is it all in the ext rom or built into the actual rom itself?
Click to expand...
Click to collapse
In previous roms "Junk-soft" was build into ROM
please upload this rom, because looks incredible
still downloading....will up as soon as it's done and post the ftp link here
as already said, junk was in the ROM last time, I've contacted some people over the pdamobiz to have them release a clean version, if not, I will have a look to see what I can hack together
I'm downloading too. (over 40 hours already) 32 MB so far.
lvsw said:
In previous roms "Junk-soft" was build into ROM
Click to expand...
Click to collapse
if the "Junk-soft" was built in the Ext-ROM, this release would be a PERFECT ROM
felixqu said:
if the "Junk-soft" was built in the Ext-ROM, this release would be a PERFECT ROM
Click to expand...
Click to collapse
It's always up to you to upgrade your device with other people's ROM or not. If you feel it's full of junks, then just don't upgrade your device or just do it yourself.
hello,
are all the "junk-soft" in the extrom or in the ROM? is it possible to "debranded" the ROM whith making a soft reset after align the screnn? Will all this software (many unusefull for my using) don't install and we can choose afterwards what we want to install then?
sorry for my bad english.
John
Yeah, sorry Kuanchai (and I speak for many people...)
I'm currently using the RUU_Prophet_G3_2151327_AKU23_023021_P16MB_PDAMobiz_v2307 ROM that "is full of junk built into the ROM". I'm not complaining even though it is not 100% to my liking. I thank the people over at PDAMobiz for giving us this ROM and showing us the trick to CID unlock our devices.
I think in our zealousness to tinker constantly with our devices, we have become greedy Uncle SCROOGEs... always asking & asking and forgetting to say thanks.
And thank u Jesterz for notifying the rest of us. Let us have your review ok? Maybe some of our Thai friends can give a breakdown of the info on the site...?
Take it easy...
Khuanchai said:
It's always up to you to upgrade your device with other people's ROM or not. If you feel it's full of junks, then just don't upgrade your device or just do it yourself.
Click to expand...
Click to collapse
Hi guys!
Please be calm. First we should say THANKS for the effort, whatever our liking or not.
Then, we could suggest things to improuve. I myself might dislike many of the things included in someone's else cooked ROM, but suggesting to move them to another file and then allowing us to install them "one at a time" from, let's say, an SD card, is not a bitter complain.
BTW, as soon as an easy "ROM kitchen cooking" tool becomes available for Prophet I'm sure there will be no more complains in that matter....
Don't you?
Radio ROM?
does this 3.2 upgrade require a Radio ROM upgrade too?
I'm using Radio 2.30.21, not very happy at this time, since battery depletes at at astonishing rate and my prophet disconnects itself overnight. Are the different versions compatible with the new AKU?
Wich Radio versions are recomended?
Tanks!
Pfff that took long enough.
I've uploaded them onto the FTP site here.
AKU 2.3
ftp://xda:[email protected]/PDAMobiz_Prophet_WM5AKU2.3_v2320.rar
AKU 3.2
ftp://xda:[email protected]/PDAMobiz_Prophet_WM5AKU3.2_v3220.rar
Thanks, Putra and Looking Glass. Sorry if my previous post might be a little offending. I'm not in the PDAMobiz team but always respect them for their constant effort to make new ROMs for our use and never asked for anything. I also know that all of us here are also pleased to help each other without asking for any reward.
In fact, I also don't like some softwares in the PDAMobiz customized ROM but never complaint that those are junks. I agree that we could suggest things to improve and I think they are welcome any comments or suggestions. I think it would be great if our requests are more friendly. It might take time though to make a new ROM after our suggestions.
By the mean time, if you don't want to use any software in that ROM, just delete their shortcuts from /Windows/Start Menu/Programs. Their existence in your ROM doesn't make any harm to your device. If you have time to learn how to modify ROM image, then you could delete those softwares from the ROM and add any other things in. Then you will get your completely customized ROM.
Looking Glass said:
does this 3.2 upgrade require a Radio ROM upgrade too?
I'm using Radio 2.30.21, not very happy at this time, since battery depletes at at astonishing rate and my prophet disconnects itself overnight. Are the different versions compatible with the new AKU?
Wich Radio versions are recomended?
Tanks!
Click to expand...
Click to collapse
These 2 new ROMs will downgrade your Radio ROM back to 2.19.21. You could, however, upgrade it back to whatever you like. The developer suggested version 2.20.21 because it's more stable and less battery drained:
http://files.pdamobiz.com/ROMs/XDA/Prophet/PDAMobiz_Prophet_G3_RadioRom_v2.20.21.exe
http://files.pdamobiz.com/ROMs/XDA/Prophet/PDAMobiz_Prophet_G4_RadioRom_v2.20.21.exe
Please be cautious if you want to upgrade to 3.2 ROM, from the forum, there are still some bugs:
1. The battery is not charged during the sync. You need the wall charge. Someone said soft resetting the device while charging will help.
2. MSN is still not working.
3. A few people said their device hung up when enter the camera.
Khuanchai said:
These 2 new ROMs will downgrade your Radio ROM back to 2.19.21. You could, however, upgrade it back to whatever you like. The developer suggested version 2.20.21 because it's more stable and less battery drained:
http://files.pdamobiz.com/ROMs/XDA/Prophet/PDAMobiz_Prophet_G3_RadioRom_v2.20.21.exe
http://files.pdamobiz.com/ROMs/XDA/Prophet/PDAMobiz_Prophet_G4_RadioRom_v2.20.21.exe
Please be cautious if you want to upgrade to 3.2 ROM, from the forum, there are still some bugs:
1. The battery is not charged during the sync. You need the wall charge. Someone said soft resetting the device while charging will help.
2. MSN is still not working.
3. A few people said their device hung up when enter the camera.
Click to expand...
Click to collapse
The above files are on the FTP server, the speeds are very slow from pdamobiz
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/RadioRom/
Thanks
Many thanks for info, will post my findings through the trial...
BTW just cancelled the endless download from the pdamobiz congested site.
;-)
BTW, can anyone confirm what pagepool size these 2 new ROMs use? I glanced the PDAMobiz site, but couldn't find any info.
Hi,
I've got a HTC Tytn 2 bought in the netherlands and it's shipped rom version 1.56.404.6 and radio version 1.27.1.32
I've searched and tried 3 different roms:
Ruu_Signed_Duttys_WM6.1_Hybrid_1.64.08.21__RTM_
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid_V2_1_65.14.06_CubeV2_
NoThrills_WM61_NLD_V3.exe
They all give error [262]
I've disabled the windows firewall.
Did a clean XP install and activesync 4.5
None works.
Anyone can point me in the right direction? as i'm new here.
ps. what mean these terms?
Cube, No_Cube, Lite and Hybrid?
Thanks
arjanv said:
Hi,
I've got a HTC Tytn 2 bought in the netherlands and it's shipped rom version 1.56.404.6 and radio version 1.27.1.32
I've searched and tried 3 different roms:
Ruu_Signed_Duttys_WM6.1_Hybrid_1.64.08.21__RTM_
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid_V2_1_65.14.06_CubeV2_
NoThrills_WM61_NLD_V3.exe
They all give error [262]
I've disabled the windows firewall.
Did a clean XP install and activesync 4.5
None works.
Anyone can point me in the right direction? as i'm new here.
ps. what mean these terms?
Cube, No_Cube, Lite and Hybrid?
Thanks
Click to expand...
Click to collapse
Oh for the love of GOD man. You must really want to brick that thing. Read the sticky at the top of the forum. Start there. Don't pass go and dont collect $200.
P1Tater said:
Oh for the love of GOD man. You must really want to brick that thing. Read the sticky at the top of the forum. Start there. Don't pass go and dont collect $200.
Click to expand...
Click to collapse
thanks for the blurry answer. Now I got even more questions.
Is'it possible to update my phone to windows mobile 6.1?
can someone tell me which rom i should use.
search for duttys roms they are the best XD and remember before you upgrade download and install hard spl or you can brick your phone
arjanv said:
thanks for the blurry answer. Now I got even more questions.
Is'it possible to update my phone to windows mobile 6.1?
can someone tell me which rom i should use.
Click to expand...
Click to collapse
Its not blurry. Start with the sticky and read. Hardspl, how to flash, sd or usb, there is alot of info to read before you flash.
arjanv said:
thanks for the blurry answer. Now I got even more questions.
Is'it possible to update my phone to windows mobile 6.1?
can someone tell me which rom i should use.
Click to expand...
Click to collapse
Like P1tater said before start on the first sticky of the forum or just click on the Link in my signature labeled "Flashing virgins click here". That will reveal all pertinent information. And like stated above this post for the love of God, Allah, Flying Spaghetti Monster, or whoever HardSPL first.
arjanv said:
thanks for the blurry answer. Now I got even more questions.
Is'it possible to update my phone to windows mobile 6.1?
can someone tell me which rom i should use.
Click to expand...
Click to collapse
How is it blurry? There's a huge link with nice big red letters in that sticky that even a pile of freshly shaven wool covered in alfredo sauce would know addresses your question:
ROM Upgrading Wiki (top three links below) <--- Want a new ROM? Don't know what a ROM is? Start here with this 6 step guide.
I can only assume that by blurry you mean you read his response without your glasses and therefore the text wasn't in focus. Otherwise, I have to worry about wool being sentient and taking over the world.
jarek91 said:
I can only assume that by blurry you mean you read his response without your glasses and therefore the text wasn't in focus. Otherwise, I have to worry about wool being sentient and taking over the world.
Click to expand...
Click to collapse
Good thing I got a new pair of clippers!
arjanv said:
Hi,
I've got a HTC Tytn 2 bought in the netherlands and it's shipped rom version 1.56.404.6 and radio version 1.27.1.32
I've searched and tried 3 different roms:
Ruu_Signed_Duttys_WM6.1_Hybrid_1.64.08.21__RTM_
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid_V2_1_65.14.06_CubeV2_
NoThrills_WM61_NLD_V3.exe
They all give error [262]
I've disabled the windows firewall.
Did a clean XP install and activesync 4.5
None works.
Anyone can point me in the right direction? as i'm new here.
ps. what mean these terms?
Cube, No_Cube, Lite and Hybrid?
Thanks
Click to expand...
Click to collapse
HAHAHAHAHA
arjanv said:
thanks for the blurry answer. Now I got even more questions.
Is'it possible to update my phone to windows mobile 6.1?
can someone tell me which rom i should use.
Click to expand...
Click to collapse
MUHAHAHAHHAHAHAHAHAHHAHAHAHAHAH
I hate to say this but I never had to ask how to flash a ROM to my TytnII (AT&T Tilt). Every question on flashing ROMs has been answered time and time again. It doesn't matter what phone (Pocket PC, Smart phone, or other), you need to unlock it before you can change the OS, built-in OEM software, or the entire ROM on the device. You will only be able to update the device with the manufacturer's or cellphone comany's software updates if you do not unlock the phone.
As for updating to WM6.1, there is no update method that I know of. You will have to flash an entire 6.1 ROM to your phone. If your cell phone company releases an "update" to 6.1, it will most likely be a complete ROM and not an update like they might say.
Due to European law, most all phones are unlocked for use on different networks. That does not mean you can just flash any ROM to your phone, it still has to be software unlocked.
HINT: look up "HardSPL" or use the XDA-Wiki link at the top of your screen.
Dangerously said:
I hate to say this but I never had to ask how to flash a ROM to my TytnII (AT&T Tilt). Every question on flashing ROMs has been answered time and time again. It doesn't matter what phone (Pocket PC, Smart phone, or other), you need to unlock it before you can change the OS, built-in OEM software, or the entire ROM on the device. You will only be able to update the device with the manufacturer's or cellphone comany's software updates if you do not unlock the phone.
As for updating to WM6.1, there is no update method that I know of. You will have to flash an entire 6.1 ROM to your phone. If your cell phone company releases an "update" to 6.1, it will most likely be a complete ROM and not an update like they might say.
Due to European law, most all phones are unlocked for use on different networks. That does not mean you can just flash any ROM to your phone, it still has to be software unlocked.
HINT: look up "HardSPL" or use the XDA-Wiki link at the top of your screen.
Click to expand...
Click to collapse
Finally some human on the f..... phone. Thanks
I did not notice that i've first need to unlock the htc.(i did not find it in the faq)
This is what i did:
1] kaiser-HardSPLv1
2] Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid_V2_1_65.14.06_No_CubeV2_
Now to figure out how to set the thing to 24hours clock.
Thanks Dangerously
I can't update the Rom of my Htc Tilt to wm 6.1 (Duttys Non cube 1.65.14 and Hybrid 1.64.08-tried both). The update process is starting and stays at 0% for 2-3 mins , then showing an error message-"ERROR 262 UPDATE ERROR:..........
I attached a pic of the error message.
Now what shld i do? PLS PLS HELP and REP ASAP.
Did you follow all directions, including Hard SPL first?
Check the Wiki for answers to this error. And use Firefox to post so it will correct all your punctuation and grammatical errors.
ithehappy said:
I can't update the Rom of my Htc Tilt to wm 6.1 (Duttys Non cube 1.65.14 and Hybrid 1.64.08-tried both). The update process is starting and stays at 0% for 2-3 mins , then showing an error message-"ERROR 262 UPDATE ERROR:..........
I attached a pic of the error message.
Now what shld i do? PLS PLS HELP and REP ASAP.
Click to expand...
Click to collapse
for your sake i sure hope you flashed hardspl onto your tilt before deciding to flash a rom .. If you did make sure you read the information relevant to your phone and the procedure you were atempting than you are not in too much trouble. All you probably need to do is make sure your phone is synced to the pc and give the flash another shot.
If however you were feeling lazy and didn't bother reading any of the instructions and just flashed the rom after downloading it off of the thread than my friend you are royally screwed. I don't know what to tell you to do next if you didn't flash hardspl first as i don't know (nor hope to) the consequences for not doing that. You need to get in touch with the senior members (be nice in your request) like gsleon3 and see if they can help you solve your issue.
good luck
Yes i got it. Thanks guys. Actually i didn't do the hardspl. Now one last question- Which is best ROM by Dutty? and what is the difference between a cube and a non cube version?
Thanks again for supporting me.
Things you say before you brick your device...
ithehappy said:
Actually i didn't do the hardspl.
Click to expand...
Click to collapse
I think you may want to read the wiki's and do the HardSPL, it may save you from paying money for a new device. IMO
best rom
ithehappy said:
Yes i got it. Thanks guys. Actually i didn't do the hardspl. Now one last question- Which is best ROM by Dutty? and what is the difference between a cube and a non cube version?
Thanks again for supporting me.
Click to expand...
Click to collapse
best rom is a matter of opinion, try a few see what you like, personally i don't like dutty's roms, i prefer a fully loaded multimedia gaming rom like movile vista 1.3, and as far as your CUBE question search
ithehappy said:
Yes i got it. Thanks guys. Actually i didn't do the hardspl. Now one last question- Which is best ROM by Dutty? and what is the difference between a cube and a non cube version?
Thanks again for supporting me.
Click to expand...
Click to collapse
Here is all the files you will need.
http://www.4shared.com/file/4644747...rdSPL_-_SuperCID.html?dirPwdVerified=4118e38c
includes the CID unlocker.
I highly recommend that you do both the HardSPL and the security unlocker.
copy this file do you device.
http://www.4shared.com/file/45993740/de01ecfe/JumpSPL193-KAIS.html?dirPwdVerified=4118e38c
then run the .exe from your phone. Unplug your USB, then reconnect it.
Then disable USB connections in ActiveSync.
Run the HardSPL w/ AT.
After that is completed follow the instructions to CID unlock your phone
AllTheWay said:
Here is all the files you will need.
http://www.4shared.com/file/4644747...rdSPL_-_SuperCID.html?dirPwdVerified=4118e38c
includes the CID unlocker.
I highly recommend that you do both the HardSPL and the security unlocker.
copy this file do you device.
http://www.4shared.com/file/45993740/de01ecfe/JumpSPL193-KAIS.html?dirPwdVerified=4118e38c
then run the .exe from your phone. Unplug your USB, then reconnect it.
Then disable USB connections in ActiveSync.
Run the HardSPL w/ AT.
After that is completed follow the instructions to CID unlock your phone
Click to expand...
Click to collapse
Thank you very much. Finally i flashed the tilt with dutty's 1.65.14.06 radio version, but i can't find the radio anywhere in my device. Where is it located?
ithehappy said:
Thank you very much. Finally i flashed the tilt with dutty's 1.65.14.06 radio version, but i can't find the radio anywhere in my device. Where is it located?
Click to expand...
Click to collapse
Hidden Away in a magic "lockbox" The only indication you see is next to the "R:" on startup.
JimmyMcGee said:
Hidden Away in a magic "lockbox" The only indication you see is next to the "R:" on startup.
Click to expand...
Click to collapse
Please clear this thing....i can't understand.
Please, oh please....don't do another thing to that phone until you have read GWENI. People here have broken a lot of devices and compiled an unbelievable amount of information so that newcomers won't have to make the same destructive mistakes or ask the same old tired questions. It is oh so very frustrating to contribute this work just so somebody can drop in and deftly avoid all of these attempts at shoving information into them. Everybody is being very nice and calm while doing what we call spoonfeeding you. Show that you respect and appreciate the patience by using the resources that the members here have worked so diligently on providing. Trust me, it is time well spent and will keep you from making one of the many mistakes out there that will render your device the most expensive paperweight you own.
Remember, we have forums, threads, Wikis, and stickies. The purpose of all of these is to share our knowledge. Do not walk through this forest blindfolded or you'll find yourself sitting on your backside picking bark out of your teeth.
ithehappy said:
Please clear this thing....i can't understand.
Click to expand...
Click to collapse
There is no such thing of FM or AM radios in this PDA phone...
That radio is a ROM extension that manages the cellular/wifi/bluetooth radio frequency emissions and audio.
Please read the WIKI in full...
ithehappy said:
Thank you very much. Finally i flashed the tilt with dutty's 1.65.14.06 radio version, but i can't find the radio anywhere in my device. Where is it located?
Click to expand...
Click to collapse
Well Well Well... I understand that you are new to this thread as I am and try to get help from people. Just a bit of advice, you might need as least to read the sticky on this thread before giving out any questions
To answer your question, you might need to go to Start->Setting->System->Device Information, then you will see basic information on your device
remember dutty
svcglobal said:
There is no such thing of FM or AM radios in this PDA phone...
That radio is a ROM extension that manages the cellular/wifi/bluetooth radio frequency emissions and audio.
Please read the WIKI in full...
Click to expand...
Click to collapse
ah ah ah remember... dutty being the god that he is has gotten an FM radio to work (sorta) and we can download that cab but we need a wired headset to use the FM radio and personally i can't see spending $400 on a phone if you are unwilling to shell out a few more bucks to get a bt headset so i don't have the wired headset to use the FM radio
ithehappy said:
Please clear this thing....i can't understand.
Click to expand...
Click to collapse
I mean If you are talking about the Phone Radio You won't "find it."
However others have brought up a good point, if you mean FM radio. You won't find one either. It doesn't work.
Looks like RuffRuff has dumped the HTC Raphael ROM
http://forum.xda-developers.com/showthread.php?t=406943
Is it possible to create a new rom for the Kaiser from it?
In the post he say's that device felt very fast compared to the Diamond.
Maybe we could benefit from it also.
OMG, this is what i'm waiting for
Oh man, thats gonna be hottest topic i think, and hottest awaiting for a new rom!
hang.tuah said:
OMG, this is what i'm waiting for
Click to expand...
Click to collapse
Perhaps the HTC stuff from this rom, and the OS from the Xperia 20226 - although both of these are Beta roms, stability may be an issue.
Dl'ing both to have a look...
http://www.mediafire.com/?yybn0wtzgtm
http://rapidshare.com/files/126151541/SYS-20226-Xperia.rar.html
I wouldn't get your hopes up. Reading the post it seems that it will benefit Diamond owners more than Kaiser owners, plus there's nothing there that can help with porting Manilla over.
But I've been wrong before, although it was only 1 time.
fb401 said:
I wouldn't get your hopes up. Reading the post it seems that it will benefit Diamond owners more than Kaiser owners, plus there's nothing there that can help with porting Manilla over.
But I've been wrong before, although it was only 1 time.
Click to expand...
Click to collapse
The UI interface won't work on Kaiser, we know this already. Looking for some new Builds though and maybe better drivers....how about some new apps. This is what I would like to see
AllTheWay said:
The UI interface won't work on Kaiser, we know this already. Looking for some new Builds though and maybe better drivers....how about some new apps. This is what I would like to see
Click to expand...
Click to collapse
Hope this isn't too n00b of a question, but what about the OS version? If the UI won't work, that 's fine; but perhaps the OS is a bit more optimized and will work well for the kaiser..? what about the Radio? can it be used? Is it any better than what we have now?
Thanks in advance for any new information and answers to my questions!
ChrisSpera said:
Hope this isn't too n00b of a question, but what about the OS version? If the UI won't work, that 's fine; but perhaps the OS is a bit more optimized and will work well for the kaiser..? what about the Radio? can it be used? Is it any better than what we have now?
Thanks in advance for any new information and answers to my questions!
Click to expand...
Click to collapse
Nope radio's won't work. GSLEON bravely tried to flash a Diamond Radio and it bricked his device. I would recommend that you wouldn't do this.
The OS version is what I am talking about.
The Windows build is 19960.1.2.2
Did the dump and alot of nice programs built into the SYS folder....problem is like the Diamond is that it is made for a VGA screen so in order to use a majority of the programs they need to be scaled down or reconfigured...
Doing a ROM right now with an XIP Port and moderated SYS port will let you know how it goes!!!
ryncppr, Im counting on you Bub!
Tried to install the opera .cab for it.
Got this Error.
Code:
Setup Error:
Unable to install application. Please update your device ROM to the required version before trying again.
ryncppr said:
Did the dump and alot of nice programs built into the SYS folder....problem is like the Diamond is that it is made for a VGA screen so in order to use a majority of the programs they need to be scaled down or reconfigured...
Doing a ROM right now with an XIP Port and moderated SYS port will let you know how it goes!!!
Click to expand...
Click to collapse
Dam man i see u ain't waste no time. hope u report back with some hella good news.
AllTheWay said:
Tried to install the opera .cab for it.
Got this Error.
Code:
Setup Error:
Unable to install application. Please update your device ROM to the required version before trying again.
Click to expand...
Click to collapse
send the cab file to ryncppr and let him give it try once he finish putting together his test rom.
punkcell said:
send the cab file to ryncppr and let him give it try once he finish putting together his test rom.
Click to expand...
Click to collapse
I'm sure he has it already
Arlop said:
Looks like RuffRuff has dumped the HTC Raphael ROM
http://forum.xda-developers.com/showthread.php?t=406943
Is it possible to create a new rom for the Kaiser from it?
In the post he say's that device felt very fast compared to the Diamond.
Maybe we could benefit from it also.
Click to expand...
Click to collapse
Thanks for this nice info, downloading now
sakajati said:
Thanks for this nice info, downloading now
Click to expand...
Click to collapse
Now we got another chef in the kitchen. This should be interesting.
It's a cook off!!!
EDIT: Gonna sticky the post for the time being!
Yep, HyperDragon IIIr coming soon
what kitchen are you guys using, I got the sys folder with all of the stuff in it, but I can't port over the XIP for some reason. Keep getting errors. As a matter of fact, zipped up my SYS folder is 99MB. I cant even get it to build the OS. AAAAAAARRRRRRGGGGGGHHHHHHH
sakajati said:
Yep, HyperDragon IIIr coming soon
Click to expand...
Click to collapse
Patiently waiting...
Has anyone got this installed on there 6700 and working? Im using a 6.1 rom and cant get it to work. if so what rom are you using??
thank you!
gofawkurself said:
Has anyone got this installed on there 6700 and working? Im using a 6.1 rom and cant get it to work. if so what rom are you using??
thank you!
Click to expand...
Click to collapse
I had replied in the main thread, but it's getting a little crowded. I can't get it to work on mine either. I know that's not what you wanted to hear though.
I'm running LennySh 6.1 build 20273. I've tried installing update 7 several times, once after a hard reset. All it says each time is "Tap here to launch TouchFLO" and after taping it says "Launching TouchFLO" then it goes back to "Tap here to launch TouchFLO". Tried update 8 and I still get the same result.
same here, im trying the newest update later today. If anyone out there has this running on 6700 PLEASE tell us what rom your using k thx!
ARI
yea, i got that sneaky feeling it's got nothing to do with the updates and more with the outdated phone. I've seen a few 6700's on the main thread saying the same thing. and w all have different roms. I even flashed 6.0 to try and to no avail. so i went back to 6.1.
the mogul with the same hardware and ram has no problems though. bummer..
hmm, same hardware makes no senese
ari
Well if anyone tries cooking it in a rom. Let us know the out come..
gofawkurself said:
Well if anyone tries cooking it in a rom. Let us know the out come..
Click to expand...
Click to collapse
Did it yesterday, doesn't work. I also tried installing each of the 11 updates and 4 of the betas, none of them work on Apache w/ WM6.1
Man...I really thought it would work...installed the Omnia D2D driver and everything...even almost bricked the stinkin phone.
But, just like everyone else...Tap here to launch...over and over...nothing!
well thanks for everyone trying it out on there different roms. Atleast we know without a doubt that it will not work on our devices. Maybe its time to trade our old timers phones in and catch up with the rest of the world
http://www.truveo.com/PPC-6700-with-Windows-Mobile-61-and-TouchFlo/id/547185311
tis guy got it to work somehow.
minsk said:
http://www.truveo.com/PPC-6700-with-Windows-Mobile-61-and-TouchFlo/id/547185311
tis guy got it to work somehow.
Click to expand...
Click to collapse
dude that was just regular touchflo...
You guys need a proper ROM build that supports Manilla2d. Many of the more up to date phone forums(kaiser, hermes etc) are all using the latest builds. That's why you're getting screwed. Ask for a fresh build from a chef.
Macgyvec3 said:
You guys need a proper ROM build that supports Manilla2d. Many of the more up to date phone forums(kaiser, hermes etc) are all using the latest builds. That's why you're getting screwed. Ask for a fresh build from a chef.
Click to expand...
Click to collapse
Then what build should we be using? I have tried M2D on 19213, 19588, 19716, 20273, and 20748. It doesn't work on ANY of them.
add build 20755 to list
I also tried 20755 tried cooking it in ROM and installing after the fact nothing seems to work, at least cooking it gets the same results you are seeing the step by step approach however reveals to me that task manager is not installing on my appache
Got it working on my XV6700
Runs Flawless a little lag once and a while but other then that it rocks, i will post a video in a min but you need to download "[UPDATE 17]M2D 0.10 Files" that's the ones that worked for me http://forum.xda-developers.com/showthread.php?t=398173
DL-Link http://rs432.rapidshare.com/files/149290739/m2dinstall.rar