Database Info

Can't update Rom to 6.1 in Tilt

I can't update the Rom of my Htc Tilt to wm 6.1 (Duttys Non cube 1.65.14 and Hybrid 1.64.08-tried both). The update process is starting and stays at 0% for 2-3 mins , then showing an error message-"ERROR 262 UPDATE ERROR:..........
I attached a pic of the error message.
Now what shld i do? PLS PLS HELP and REP ASAP.

Did you follow all directions, including Hard SPL first?

Check the Wiki for answers to this error. And use Firefox to post so it will correct all your punctuation and grammatical errors.

ithehappy said:
I can't update the Rom of my Htc Tilt to wm 6.1 (Duttys Non cube 1.65.14 and Hybrid 1.64.08-tried both). The update process is starting and stays at 0% for 2-3 mins , then showing an error message-"ERROR 262 UPDATE ERROR:..........
I attached a pic of the error message.
Now what shld i do? PLS PLS HELP and REP ASAP.
Click to expand...
Click to collapse
for your sake i sure hope you flashed hardspl onto your tilt before deciding to flash a rom .. If you did make sure you read the information relevant to your phone and the procedure you were atempting than you are not in too much trouble. All you probably need to do is make sure your phone is synced to the pc and give the flash another shot.
If however you were feeling lazy and didn't bother reading any of the instructions and just flashed the rom after downloading it off of the thread than my friend you are royally screwed. I don't know what to tell you to do next if you didn't flash hardspl first as i don't know (nor hope to) the consequences for not doing that. You need to get in touch with the senior members (be nice in your request) like gsleon3 and see if they can help you solve your issue.
good luck

Yes i got it. Thanks guys. Actually i didn't do the hardspl. Now one last question- Which is best ROM by Dutty? and what is the difference between a cube and a non cube version?
Thanks again for supporting me.

Things you say before you brick your device...
ithehappy said:
Actually i didn't do the hardspl.
Click to expand...
Click to collapse
I think you may want to read the wiki's and do the HardSPL, it may save you from paying money for a new device. IMO

best rom
ithehappy said:
Yes i got it. Thanks guys. Actually i didn't do the hardspl. Now one last question- Which is best ROM by Dutty? and what is the difference between a cube and a non cube version?
Thanks again for supporting me.
Click to expand...
Click to collapse
best rom is a matter of opinion, try a few see what you like, personally i don't like dutty's roms, i prefer a fully loaded multimedia gaming rom like movile vista 1.3, and as far as your CUBE question search

ithehappy said:
Yes i got it. Thanks guys. Actually i didn't do the hardspl. Now one last question- Which is best ROM by Dutty? and what is the difference between a cube and a non cube version?
Thanks again for supporting me.
Click to expand...
Click to collapse
Here is all the files you will need.
http://www.4shared.com/file/4644747...rdSPL_-_SuperCID.html?dirPwdVerified=4118e38c
includes the CID unlocker.
I highly recommend that you do both the HardSPL and the security unlocker.
copy this file do you device.
http://www.4shared.com/file/45993740/de01ecfe/JumpSPL193-KAIS.html?dirPwdVerified=4118e38c
then run the .exe from your phone. Unplug your USB, then reconnect it.
Then disable USB connections in ActiveSync.
Run the HardSPL w/ AT.
After that is completed follow the instructions to CID unlock your phone

AllTheWay said:
Here is all the files you will need.
http://www.4shared.com/file/4644747...rdSPL_-_SuperCID.html?dirPwdVerified=4118e38c
includes the CID unlocker.
I highly recommend that you do both the HardSPL and the security unlocker.
copy this file do you device.
http://www.4shared.com/file/45993740/de01ecfe/JumpSPL193-KAIS.html?dirPwdVerified=4118e38c
then run the .exe from your phone. Unplug your USB, then reconnect it.
Then disable USB connections in ActiveSync.
Run the HardSPL w/ AT.
After that is completed follow the instructions to CID unlock your phone
Click to expand...
Click to collapse
Thank you very much. Finally i flashed the tilt with dutty's 1.65.14.06 radio version, but i can't find the radio anywhere in my device. Where is it located?

ithehappy said:
Thank you very much. Finally i flashed the tilt with dutty's 1.65.14.06 radio version, but i can't find the radio anywhere in my device. Where is it located?
Click to expand...
Click to collapse
Hidden Away in a magic "lockbox" The only indication you see is next to the "R:" on startup.

JimmyMcGee said:
Hidden Away in a magic "lockbox" The only indication you see is next to the "R:" on startup.
Click to expand...
Click to collapse
Please clear this thing....i can't understand.

Please, oh please....don't do another thing to that phone until you have read GWENI. People here have broken a lot of devices and compiled an unbelievable amount of information so that newcomers won't have to make the same destructive mistakes or ask the same old tired questions. It is oh so very frustrating to contribute this work just so somebody can drop in and deftly avoid all of these attempts at shoving information into them. Everybody is being very nice and calm while doing what we call spoonfeeding you. Show that you respect and appreciate the patience by using the resources that the members here have worked so diligently on providing. Trust me, it is time well spent and will keep you from making one of the many mistakes out there that will render your device the most expensive paperweight you own.
Remember, we have forums, threads, Wikis, and stickies. The purpose of all of these is to share our knowledge. Do not walk through this forest blindfolded or you'll find yourself sitting on your backside picking bark out of your teeth.

ithehappy said:
Please clear this thing....i can't understand.
Click to expand...
Click to collapse
There is no such thing of FM or AM radios in this PDA phone...
That radio is a ROM extension that manages the cellular/wifi/bluetooth radio frequency emissions and audio.
Please read the WIKI in full...

ithehappy said:
Thank you very much. Finally i flashed the tilt with dutty's 1.65.14.06 radio version, but i can't find the radio anywhere in my device. Where is it located?
Click to expand...
Click to collapse
Well Well Well... I understand that you are new to this thread as I am and try to get help from people. Just a bit of advice, you might need as least to read the sticky on this thread before giving out any questions
To answer your question, you might need to go to Start->Setting->System->Device Information, then you will see basic information on your device

remember dutty
svcglobal said:
There is no such thing of FM or AM radios in this PDA phone...
That radio is a ROM extension that manages the cellular/wifi/bluetooth radio frequency emissions and audio.
Please read the WIKI in full...
Click to expand...
Click to collapse
ah ah ah remember... dutty being the god that he is has gotten an FM radio to work (sorta) and we can download that cab but we need a wired headset to use the FM radio and personally i can't see spending $400 on a phone if you are unwilling to shell out a few more bucks to get a bt headset so i don't have the wired headset to use the FM radio

ithehappy said:
Please clear this thing....i can't understand.
Click to expand...
Click to collapse
I mean If you are talking about the Phone Radio You won't "find it."
However others have brought up a good point, if you mean FM radio. You won't find one either. It doesn't work.

WM6.1 for Imate 9502 and 8502 is OUT!!

this rom is real!
i just flashed it!
i'm playing with it now to see what' the improvments and what' works and what' dont work.
http://forums.imate.com/m_2823/mpage_1/key_/tm.htm#2828

Does it work with USA versions with say... AT&T..?

there is a USA version of Imate 9502?
if u talking if internet works in USA, yes it works!
wm6.1 seems alot faster or maybe cus i havnt installed any other programs on it yet! haha

Ah, Ok, I meant to say unlocked version with the Telsa logo. Mine is fully unlocked with no carrier's attached but if it works in USA, who cares right! Very nice!!

damn! this is cool!
now there is a option for HSPA setting!!
Economy Mode (up to 3.6 Mbps)
and
Turbo Mode (up to 7.2Mbps)

thats great news!
is the original ROM available to reflash it, if needed?
I haven't found anything yet.

bommel0815 said:
thats great news!
is the original ROM available to reflash it, if needed?
I haven't found anything yet.
Click to expand...
Click to collapse
no original rom, but who need it!
everything just works on wm6.1, havnt find anything to complain yet!

Wow this is great news...but what about the 6150?
Any news on that?

netnerd, how can you say you won't need it after just a few days of usage.
also, i think about selling the device, and i am not sure potential buyers would be happy with a beta rom

About to flash mine now!
The official I-Mate Rom update is scheduled for mid-August. I hope they get the video drivers sorted properly (I hear this update makes little difference to video performance).
I bet the Flame users are excited aboutt he SDHC support. Hopefully some clever person will be able to use our ROM to help them out.

Well I've run into a problem installing already:
"SFX v2.0 can not support Windows Vista system"
what do I need to do?

mike freegan said:
"SFX v2.0 can not support Windows Vista system"
what do I need to do?
Click to expand...
Click to collapse
make your pc dual-boot! with XP and vista!

netnerd said:
this rom is real!
http://forums.imate.com/m_2823/mpage_1/key_/tm.htm#2828
Click to expand...
Click to collapse
The download link is now broken - can anyone point out an alternative or a repost?

mike freegan said:
Well I've run into a problem installing already:
"SFX v2.0 can not support Windows Vista system"
what do I need to do?
Click to expand...
Click to collapse
maybe you can use this to extract it?
http://www.downloadtopc.com/get/9/37589/File2Pack_SFX.html

Upgrade process started fine... at the final stage it says congratulation on the PC screen, but the device says EUM update fail: Please reconnect tp PC and run the upgrade again... Tried it again and msg changes to "Get Battery status fail"... Any clu.. Any way to use mtty?

is this different to the ROM found at http://forum.xda-developers.com/showthread.php?t=407336?

man2003 said:
Tried it again and msg changes to "Get Battery status fail"... Any clu.. Any way to use mtty?
Click to expand...
Click to collapse
I remember the upgrade required the battery to be at least 50% charged to begin - might wanna check your battery level & recharge.

imate 9502 original rom ?
hey guy s any one have the original rom i need to go back on 6.0 wm goes my phone is defective and i can t shipped to imate with 6.1 telstra firmware i m in canada thanks

It would be very nice to have the original ROM, as I-Mate does not provide it... I had the same problem with my device and now it's dead (Ok, It was already dead before, with all its problems)...

Isbrasil, have you tried switching to maintenance mode and reflash it?

Any HTC Stock 6.1 ROMs in nbh form without radio out there?

Been trying to get used to flashing from SD card but can't seem to find a Stock ROM that is suitable. They all seem to come as exe files. I found a good list of reconstructed 6.0 ROMs but can't find any 6.1 ones.
Does this mean everyone flashes to Stock via USB first? Or am I missing something ?

I would like to know this too!
I pulled the nbh from the exe on at&ts website but when I tried flashing from my sd card it only changed my spl and radio back to stock but not the rom.

try to unrar .exe file with winrar

Take this, Shipped 6.1 ROm, no Radio, no SPL
http://www.4shared.com/file/105398668/839af0c2/HTC_WWE_61_Shipped.html
Open and get the RUU file to your SDCard

Pisca said:
Take this, Shipped 6.1 ROm, no Radio, no SPL
http://www.4shared.com/file/105398668/839af0c2/HTC_WWE_61_Shipped.html
Open and get the RUU file to your SDCard
Click to expand...
Click to collapse
Thanks. Look like what I was after. Will give it a try next time .

I think almost all cooks have their own stripped 6.1 ROMs. I have one in my thread, and I think zelendel posted one in TPC's thread.

I posted these before.. but here it is again.
Below is the same is the one linked on the other post above. I just named it with correct version number.
Kaiser HTC ASIA HK WWE 3 34 721 2 no radio
RUU Kaiser CINGULAR WWE 3 57 502 2 no radio

f1ip said:
I posted these before.. but here it is again.
Below is the same is the one linked on the other post above. I just named it with correct version number.
Kaiser HTC ASIA HK WWE 3 34 721 2 no radio
RUU Kaiser CINGULAR WWE 3 57 502 2 no radio
Click to expand...
Click to collapse
Thanks for those . Any particular difference between the two versions? Is the Cingular one onlt for AT&T maybe? I have a UK Orange Tytnii.
Just thought maybe I shouldn't be keeping recommended radio when I reflash ROM? Is it best to reflash original radio first too or doesn't it make any difference?

ai6908 said:
I think almost all cooks have their own stripped 6.1 ROMs. I have one in my thread, and I think zelendel posted one in TPC's thread.
Click to expand...
Click to collapse
Damned if I can see anything in your ROM thread or in TPC's lol. I've also tried every search term I can think of.
All I can think is people who bother to do the recommeneded flashing back to stock must be using usb.
Anyways I have a couple now so next time here goes .........

Thank you.

Restorer said:
Damned if I can see anything in your ROM thread or in TPC's lol. I've also tried every search term I can think of.
All I can think is people who bother to do the recommeneded flashing back to stock must be using usb.
Anyways I have a couple now so next time here goes .........
Click to expand...
Click to collapse
Seriously! You must be joking right?

ai6908 said:
Seriously! You must be joking right?
Click to expand...
Click to collapse
Exactly what i was thinking especially as all info needed on first page of threadz to be honest would be better if people didn't get answered who are far too lazy to read and then impolite in the same thread. "that's how i read it anyway"
I know things will never change just airing my point of view.
Please peeps find the answers, post new threads when you have run out of possibilitys & feel that sense of achievement when you have worked out your own issue

ai6908 said:
Seriously! You must be joking right?
Click to expand...
Click to collapse
No I'm not. Maybe I am going blind but all I see is your link to the AT&T stripped rom but I'm looking for HTC - as I said I've got a UK Orange TytnII which from what I've read says it should be flashed with HTC stock. Or maybe you are saying it doesn't matter which stock rom? And there is definitely no mention of stripped rom on TCP's page - I know that by heart now lol.
Anyway I have 2 now so I will have a go next time. Thanks again.

stylez said:
Exactly what i was thinking especially as all info needed on first page of threadz to be honest would be better if people didn't get answered who are far too lazy to read and then impolite in the same thread. "that's how i read it anyway"
I know things will never change just airing my point of view.
Please peeps find the answers, post new threads when you have run out of possibilitys & feel that sense of achievement when you have worked out your own issue
Click to expand...
Click to collapse
How dare you jump in here with that attack. I really object to this. Where have I been impolite? Have you read my OP?
For the record I not only read the instructions. I devour them! Then I learnt them parrot fashion before I began. I have been a lurker round here for years but only started flashing last week. And for the last several weeks I have been trawling through literally thousands of posts to be sure of getting it right.
Now please show me on those instruction pages where it tells you how you can find a stock HTC ROM without radio that can be flashed from an SD card!
ai6908 kindly referred me to his page where there is only a link to a stripped AT&T stock rom and to TCP's page where there is no mention either. I was also asking if it was necessary to reflash the same radio every time as none of the instructions mention if you have the radio you need already. Still not had an answer on this so maybe it's just a stupid question - just wish I knew the answer lol.
Thankfully more helpful souls than you have provided me with the file I need. Thanks again F1ip and Pisca.
Some of you people on here can be arrogant so and so's. I belong to many forums and have never come across anything like it. Look at all the space you wasted flaming me and now me having to defend myself! No wonder the kids on here post the way they do if this is the example they get set by senior members. I would wager well over half the posts on this forum are pointless flaming. And just ask yourself how many questions are really new and have not already been answered by someone somewhere here. And look how much space would have been saved if you hadn't butted in here on your high horse without reading my question properly .
Rant over.

Restorer said:
No I'm not. Maybe I am going blind but all I see is your link to the AT&T stripped rom but I'm looking for HTC - as I said I've got a UK Orange TytnII which from what I've read says it should be flashed with HTC stock. Or maybe you are saying it doesn't matter which stock rom? And there is definitely no mention of stripped rom on TCP's page - I know that by heart now lol.
Anyway I have 2 now so I will have a go next time. Thanks again.
Click to expand...
Click to collapse
Stock ROM is the same, it doesnt matter much for it being HTC or AT&T. Base ROM is the same on both of them.
Actually in my opinion, you dont even need to flash to stock ROM. I never flash stock ROM when I flash, and I flash about 10 times a day sometimes.
Sometimes occational hard reset might help. So in my opinion, just flash to any ROM, and do a hard reset after flash and when it prompts for screen alignment. That should solve all your flash issues.

ai6908 said:
Stock ROM is the same, it doesnt matter much for it being HTC or AT&T. Base ROM is the same on both of them.
Actually in my opinion, you dont even need to flash to stock ROM. I never flash stock ROM when I flash, and I flash about 10 times a day sometimes.
Sometimes occational hard reset might help. So in my opinion, just flash to any ROM, and do a hard reset after flash and when it prompts for screen alignment. That should solve all your flash issues.
Click to expand...
Click to collapse
Interesting, thanks. Certainly would save time not having to go through the whole rigmarole every time. That's one of the main reasons I was asking about the cut-down roms. As least I wouldn't have to keep doing the radio as well. Now whether with my lack of experience I should be going against what the 6.5 chefs seem to all be advising ....... .
On the other hand I may never flash again since TCP's latest seems to tick all my boxes. But having summoned up the courage to get going in the first place and it opens up a whole new lease of life for your phone, you kinda get a bit hooked. So maybe when I find one where MotoHome runs fast and smooth on my old Kaiser ........

Restorer said:
How dare you jump in here with that attack. I really object to this. Where have I been impolite? Have you read my OP?
Click to expand...
Click to collapse
Basically if you read your last post before mine sounds like you are saying you cannot find anything in the threadz you describe.... bada bing bada bong no need to get so deffensive ah and .exe's can be uncompressed so as to get the .nbh for future reference....
Sorry for my response maybe i'm just gettin fed up with where is? questions when it can be found easily i'm sure that if you had of PM'd anyone they would have provided the answer.
My non rant over "so not everything is dirrected @ single poster" my applogies.
Just glad you sorted and found the answer

stylez said:
Basically if you read your last post before mine sounds like you are saying you cannot find anything in the threadz you describe.... bada bing bada bong no need to get so deffensive ah and .exe's can be uncompressed so as to get the .nbh for future reference....
Sorry for my response maybe i'm just gettin fed up with where is? questions when it can be found easily i'm sure that if you had of PM'd anyone they would have provided the answer.
My non rant over "so not everything is dirrected @ single poster" my applogies.
Just glad you sorted and found the answer
Click to expand...
Click to collapse
Apologies accepted . As you might be abe able to tell, the flaming that goes on verywhere around here really gets to me and you certainly hit a nerve. I sometimes wonder if I've wandered onto some Fight Club site by mistake lol .
Yes I do know the exe files can be uncompressed but the radio is still in the nbh file - and one guy who tried using the nbz file on its own said it flashed the radio part ok but not the rom itself .
What I will do is delve a little more into what makes up the unzipped nbh file. Might be a good way to start getting into this kitchen stuff .

[Q] Help with the HTC Arrive - The Tangled Path To Custom ROMs

Hey all, I'm new here, but I've been lurking for a few days in all boards relating to WP7.8, etc.
I really do hesitate when I make this thread, because I know a lot of other people have already asked how to do this,
HOWEVER! I can't seem to pull together all of the information I need- the trail seems to go cold after a while,
I have an HTC Arrive (Gold C) on Sprint, With Mango & SPL 4.3
What I am trying to do is get to a point where I can install a 7.8 custom ROM, or simply, I'm trying to get HSPL (which, if I'm correct, requires me to downgrade to NoDo?)
After reading, it looks like the solution to my problem is to use Ansar's NoDo RUU for the Arrive, then, use the Dark Forces Team HSPL Loader to load HSPL onto my Arrive, and then finally, install a ROM like leadpoizon's Custom 7.8 ROM.
I'm pretty tech savvy, but as far as mobile devices go, the hardest thing I've ever had to do was jailbreak a few iPods, and install CFWs on PSPs.
I will openly admit, just putting this information together has been a confusing painus in the anus for me.
My problem is thus - I haven't been able to do any of this because Ansar's NoDo RUU (and, as it would seem, the rest of his RapidShare files) are all down because his bandwidth on RS ran out.
Does anybody have a copy of the NoDo RUU for the Arrive that they'd be willing to upload?
I'd be suuuper appreciative...
Thanks for your time and patience with my utter-noobliness.
I'll be sure to make a proper introductory post later, but I've got work and I'm out of time.
-echobl

Hello and welcome.
Click the link in the first post of this thread and it is the 4th down, Gold C Sprint WWE 1.25 RELEASE
http://forum.xda-developers.com/showthread.php?t=1427907
Don't forget to delete the RUU_signed file before downgrading!
Also, you must install RSPL, then HSPL, then the custom ROM. I am using the LEAD rom and its working great!
Good luck

x_orange90_x said:
Hello and welcome.
Click the link in the first post of this thread and it is the 4th down, Gold C Sprint WWE 1.25 RELEASE
http://forum.xda-developers.com/showthread.php?t=1427907
Don't forget to delete the RUU_signed file before downgrading!
Also, you must install RSPL, then HSPL, then the custom ROM. I am using the LEAD rom and its working great!
Good luck
Click to expand...
Click to collapse
Thanks so much, for the welcome and for your help!
That's exactly what I've been looking for, I never checked out that link because the thread was titled with Gold, not Arrive, GoldC, etc...
I hope this thread helps someone like me out!
EDIT:
Where does the RUU installer place all of the files? o.o

Nevermind, got it! Everything works great on leadpoizon's ROM, aside from the HTC Hub tile, which I didn't care for to start with.
Thanks again.
:good:

HTC Arrive
I, too, am having the same problem as the original poster. Except now, the link to the thread we are being sent to is now not working. Any information will be greatly appreciated. Thanks!

Does this process also work for the HTC Pro7 T7576? This is the GSM version of the device where the Arrive is the CDMA one.

[Q] About 7510

Hello, I would like to give an update to my X7510. do you have any proposal to help me? a good navigator to install? I also have a problem with the bluetooth because I can not pair the 7510 with a receiver BT74R. would someone has suggestions? thanks:good::good:

What version of windows mobile do you have installed on your x7510? Is it a custom rom?

Vico100 said:
What version of windows mobile do you have installed on your x7510? Is it a custom rom?
Click to expand...
Click to collapse
windows mobile 6.0, the original.... I would like a real refresh if it would be possible.... with something new and original....

You mean like windows mobile 6.5? or stay with the latest htc official rom?

Vico100 said:
You mean like windows mobile 6.5? or stay with the latest htc official rom?
Click to expand...
Click to collapse
I never updated the software of htc, it's the same when I bought it, I am not a very expert..... I am opened to all new ideas....

This device is at least six years old. The download links to rom's are all over the x7510 forum section. I can help, but after years of cooking rom's and stuff I have packed up all my files. If you need something you will have to be more specific.
There is the official htc rom (6.1 i think, check the forums) and there are also a lot of cooked roms. My rom is 6.5, its also available here. If you want to put a custom rom on, remember to "unlock" (Hard-SPL) the device first.
Windows mobile is dead. I just use this device as GPS at the moment. Its a very good device. Just wish windows mobile 6.x+ ect. was still alive. Windows 7/8 mobile is very noob and for stupid people. I have left and gone to android, at least one can cook a bit easier there...
Also, ...there is no need to quote my reply, since you post directly under my post.

Vico100 said:
This device is at least six years old. The download links to rom's are all over the x7510 forum section. I can help, but after years of cooking rom's and stuff I have packed up all my files. If you need something you will have to be more specific.
There is the official htc rom (6.1 i think, check the forums) and there are also a lot of cooked roms. My rom is 6.5, its also available here. If you want to put a custom rom on, remember to "unlock" (Hard-SPL) the device first.
Windows mobile is dead. I just use this device as GPS at the moment. Its a very good device. Just wish windows mobile 6.x+ ect. was still alive. Windows 7/8 mobile is very noob and for stupid people. I have left and gone to android, at least one can cook a bit easier there...
Also, ...there is no need to quote my reply, since you post directly under my post.
Click to expand...
Click to collapse
kind friend, thank you for your kind attention. I'm not very expert about updates, roms, etc.. actually use the 7510 only as navigator and I would like to just have a good navigator updated, possibly free. would be possible?