Hello:
I've my SDA (WM6.1) with Wifi dead, and I found a solution for this problem, but for the "Vox", I repeat the step but don't work, I think that this is because the password is differtent. Any one know the password for Tornado?
I quote the original message
akumalol said:
i make this thread because i never found a solution anywhere on the internet about this damn thing.....
so here is the steps i did.
It worked with SPL (USPL) 1.16 by jockyw.
1.boot the vox in bootloader [while the phone is off, hold camera button and plug-in usb]
2.open mtty with usb port. [if u dont see usb port search about it on forum]
3.enter "password BsaD5SeoA" without quotes
4.run the "emapiWlanMac" command [just to test]
5.run the "emapiTest" command [i dont know]
6.run the "emapiWlanEERW" command [i dont know]
7.run the "emapiInit" command [i beleive that this ressurect my wifi]
8.rerun "emapiWlanMac" command" it should be diffrent output.[if it worked]
9.run the "ruurun 0" to load the os after reboot[if u dont do that u will be on the bootloader again after reboot]
10.run the "ResetDevice" to reboot.
And Cheers!!!!
anyway this is the way it worked for me!
Click to expand...
Click to collapse
at http://forum.xda-developers.com/showthread.php?p=2695151#post2695151
anyone know whats the new command to access the PST application on 6.5?
ive tried both commands and i get an invalid application error
(Cedar + 2.00 3VO rom)
Take out the last # on both and try it again.
Hey,
this is my first post, and i 've a bad experience to tell u
I execute the bad command task 2a on MTTY and i brick my poor polaris...
this is the output on mtty:
Cmd>task 32
Cmd>task 28
Format start
Fill RSVD information for block 288 to 309
Storage start sector=0xD780, total sector=0xDB40
Storage start block=883, total block=877
Total Bad Block in CE: 1
Erase physical block from 1174 to 2032
si backup: Erase physical block from 2032 to 2048
Format end
Cmd>task 2A
Format ALL start
backup SPL OK
backup MISC configuration OK
SPL start start block=288, total block of CE=1760
ERASE block 878 FAIL !!!
Write 0xFF start page=0x4800, total page=0x1B800
SPL version and MFG TAG are same, skip it.
restore SPL OK
restore MISC configuratoin OK
restore MFG configuratoin OK
Format ALL end
Cmd>info
Cmd>info 8
--- 2K bytes sector version ---
DEVICE NAME=samsung_k9k2g08
DEVICE ID=0xAA
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40
Checking block information
BLOCK 878 (0x36E) is bad block
OS NOT FOUND !!!
Cmd>task 8
Click to expand...
Click to collapse
and finally i found my phone dead, when i press the power button nothing happen i have always blank screen, i try with any possible solution, hard-reset (i can't put in bootloader mode), FrankenKaiser tool but my phone accept only command setboot and nothing else.... (always invalid command)
Is there any working method to unbrick?
Can htc service resolve my dreadful issue??
Thanks to everybody
Hi there,
i've the same problem, MTTY can't accept any command rather than the default security locked commands.
I believe it's not fully bricked as i can connect via the MotoQ drivers and issue some mtty command, but i've erased all SPL, OS and bootloader, so i wish to recover it using also your intelligence and skillsets.
Anyone can help me?
Thank you!
Jakk
Read this post http://forum.xda-developers.com/showpost.php?p=5369709&postcount=438 to security unlock and repair your phone.
It doesn't work, since that executable doesn't work! I guess it is a fake.
Sent from my Liquid using XDA App
jakketto said:
It doesn't work, since that executable doesn't work! I guess it is a fake.
Sent from my Liquid using XDA App
Click to expand...
Click to collapse
You guess wrong, it is not a executable you run it from a dos box read http://forum.xda-developers.com/showthread.php?t=393337
it's just a patched version of FrankenKaiser.
Hi,
I've run it from a DOS prompt, but the executable gave me an error regarding some .NET and other missing library....
Sent from my Liquid using XDA App
Id guess your missing .net framework without knowing the errors or os i dont know.Try posting more informative answers other than "it doesnt work" you might get more help.If you can connect with mtty it can probably be recovered,but it's harder to recover than to brick.
well hi....
my polaris is dead. managed to conect mtty wia motoq drivers and mtty. issued commands but canot dwl frankenkaiser and a polaris 200 spl
ion_plugged said:
my polaris is dead. managed to conect mtty wia motoq drivers and mtty. issued commands but canot dwl frankenkaiser and a polaris 200 spl
Click to expand...
Click to collapse
I think FrankenKaiser by JockyW can not run on yours, because the existing version of the SPL in the package contrary to the SPL that you use ...! can you understand it, so you should be able to modify it. if you do not get any better you PM just JockyW on condition .......... you'd better ask him directly on what the requirements
Just use jpeg001 patched version of frakenkaiserhttp://forum.xda-developers.com/showthread.php?t=393337&page=44If you need the spl http://forum.xda-developers.com/showthread.php?t=381600&highlight=originalspl
ion_plugged said:
my polaris is dead. managed to conect mtty wia motoq drivers and mtty. issued commands but canot dwl frankenkaiser and a polaris 200 spl
Click to expand...
Click to collapse
Hi,
Have you repair your Device,if not,you solution is JTAG(Riff Box,ORT Tool)!?
Contact me,if you need help and I can repair via JTAG.
meknb said:
Just use jpeg001 patched version of frakenkaiserhttp://forum.xda-developers.com/showthread.php?t=393337&page=44If you need the spl http://forum.xda-developers.com/showthread.php?t=381600&highlight=originalspl
Click to expand...
Click to collapse
I think there is only one possible way to restore the hard brick, with Franken SPL Loader .....
Hakim Rahman said:
I think there is only one possible way to restore the hard brick, with Franken SPL Loader .....
Click to expand...
Click to collapse
spl loader will only work on a security unlocked phone.
is there a way to use the command "lspci" on Android?
thanks in advance....
What PCI devices are attached to the phone that this command can return?
after bootloader and connecting my pc with phone .when i open cmd and write command cd\android then it say unkown path what i do...plz solve it as i want my phone to root.htc desire u.
Hi,
Cd/android is not a valid path in Windows. A path would be c:/downloads/android/.... Etc. Just as an example. Anyway, your issue is with using your command window in Windows... You need to learn how to do that to flash your device. If you are following a guide, Asking for help there would be best. I'm not sure what you are trying to do exactly, but I'm guessing unlocking your bootloader? So you need to use the change directory command to go to your fastboot folder on your computer, only then can you use fastboot.
If so, we need to know your desire model number to point you towards help .
Thank!