##778# & ##3424# Not working on 6.5... - Dash 3G, Snap ROM Development

anyone know whats the new command to access the PST application on 6.5?
ive tried both commands and i get an invalid application error
(Cedar + 2.00 3VO rom)

Take out the last # on both and try it again.

Related

Cprog.exe parametes

I can bring up the dialler(cprog.exe) in windows mobile 5.0 phone device and pass a number with the following commandline option:
-n -url tel:+123
The problem here is the dialler comes up with prompt. I want direct dialing of specified number without prompt.
Can somebody please let me know how to make direct call without prompt.
Where are cprog.exe parameters documented.
Pass number to cproc.exe without prompt...
tanzeem_amd said:
I can bring up the dialler(cprog.exe) in windows mobile 5.0 phone device and pass a number with the following commandline option:
-n -url tel:+123
The problem here is the dialler comes up with prompt. I want direct dialing of specified number without prompt.
Can somebody please let me know how to make direct call without prompt.
Where are cprog.exe parameters documented.
Click to expand...
Click to collapse
Anybody?
I would also like to know!

HardSPL Error

Hi all,
I'm trying to run kaiser-HardSPLv1 on my system but getting an error. Here's my system info:
Windows XP SP2
AT&T Tilt
ActiveSync 4.5
- AT&T Tilt is connected to USB cable and sync icon is green.
- Extracted kaiser-HardSPLv1 to a folder. Two files are in the archive: kaiser-HardSPL.exe and README.txt.
- I followed instructions as per thread and Readme.txt.
However, when I run the utility I get an error stating that prun.exe is not a recognized program (see attached image). I placed prun.exe and also pput.exe in the same directory as extracted files. When I re-run kaiser-HardSPL.exe prun.exe and pput.exe are deleted.
I also ran tried running from the CMD prompt and double-clicking on the program with same results.
Has anyone else ran into this issue? I tried this on two systems and get the same problem.
Appreciate any feedback. Want to get this working to try the HTC ROM.
Thank you in advance.
-Mike
I was able to figure out the issue for this error. Just incase anyone has a similar issue...
In the registry (HKLM\Software\Microsoft\Command Processor) there's a key called "AutoRun". I have a few commands running from there each time a command prompt is executed. The command that caused the issue was "cd \". If the directory is changed the kaiser-HardSPL is not able to extract whatever files necessary to continue the flash process.
It's an extreme situation but I hope this may help someone.
-Mike
prun error
thanks a lot

voice command

I downloaded voice command 1.6 and tried to install it on my miphone m89. The install failed but I got much of the program, enough to go into the program folder, click on the voice command application and get all of the commands to work! Now what I want is a proper button and the full voice command program installed. Can anyone help?

[Q] Samsung Galaxy Reverb M950 from VirginMobile - Hacks?

I got myself a Samsung Galaxy Reverb M950, which was on sale for $100. Seems the phone is so new that noone hacked it yet, here are a couple that work for me:
Please post feedback into this thread, I will try to summarize them here.
ROOT
Follow instructions at http://androidforums.com/reverb-all-things-root/652290-root-reverb-no-pc-required.html
ODIN:
Download mode for ODIN key combo: power button + volume down
for Windows users: drivers are on Samsung website: http://www.samsung.com/us/support/owners/product/SPH-M950DAAVMU#
How to rip firmware?
unknown.
How to I turn the phone into modem mode, for QPST access?
Here's what somewhat worked for me: http://forum.xda-developers.com/showthread.php?t=1626638
I used script for diag+adb for galaxy s III:
Code:
#/system/bin/sh
# sets DIAG mode
echo 0 > /sys/class/android_usb/android0/enable
echo 04E8 > /sys/class/android_usb/android0/idVendor
echo 6868 > /sys/class/android_usb/android0/idProduct
echo diag > /sys/class/android_usb/android0/f_diag/clients
echo 1 > /sys/class/android_usb/android0/f_acm/instances
echo diag,acm,adb > /sys/class/android_usb/android0/functions
echo 1 > /sys/class/android_usb/android0/enable
start adbd
I also extracted COM driver in a following manner:
1. Download drivers from Samsung website: http://www.samsung.com/us/support/owners/product/SPH-M950DAAVMU#
2. using 7zip, extract all contents from the file SAMSUNG_USB_Driver_for_Mobile_Phones.exe
3. modify contents of 25_escape\ssuddmgr.inf, replacing "USB\VID_04E8&PID_6868&DevMgrSerd" with "USB\VID_04E8&PID_6868&MI_01". After that, update drivers on "CDC Serial" device, and it becomes "SAMSUNG Mobile USB At Command Port"
QPST still doesn't recognize the phone
Service codes
##786# - info
##33284# - debug (lock code 777468)
Using Phone on PagePlus
UNKNOWN WITHOUT QPST
The key combination for download mode is power button + volume down. let me know if you can find the stock firmware for odin because I managed to soft brick my phone.
martinez41613 said:
The key combination for download mode is power button + volume down. let me know if you can find the stock firmware for odin because I managed to soft brick my phone.
Click to expand...
Click to collapse
power button + volume down worked. I have no idea, why it didn't work before, maybe I had to hold it a little longer.
Windows does see device as MSM8x55. I do not think I have drivers. I guess I could try Linux, it probably needs none.
So, the question is:
a) if I could use ODIN (or heimdal or something else maybe?) to snag firmware off device
b) if there is a recovery I could flash onto this device. If there is a CWM recovery, I could probably use it to root device and such. The rooting method from here didn't wok for me: http://androidforums.com/reverb-all-things-root/652290-root-reverb-no-pc-required.html
c) I still have no idea how to get into QPST. ##8778# didn't work. Any other codes to try?
galets said:
http://androidforums.com/reverb-all-things-root/652290-root-reverb-no-pc-required.html
Click to expand...
Click to collapse
UPDATE: The rooting actually did work, I missed one step
Anyone kind enough to please upload a stock firmware of the Reverb.
Or a NANDROID backup, or an adb extract of /system.
Would appreciate much...
klacenas said:
Anyone kind enough to please upload a stock firmware of the Reverb.
Or a NANDROID backup, or an adb extract of /system.
Would appreciate much...
Click to expand...
Click to collapse
Search for Stock JB ZJones.zip for 4.1.2
Search for Stock Rom Plus.zip for ICS
---------- Post added at 10:48 AM ---------- Previous post was at 10:30 AM ----------
I have a newer Samsung Galaxy Reverb SPH-M950 Virgin Mobile that came with JB 4.1.2 pre-installed.
NONE of the Reverb Roots for JB are working. (none of the ICS roots either)
I tried reverb-cwm-test-8 and cwm-touch-iconvmu-signed(cwm6030) for the Reverb with no success. I tried different versions of TWRP made for other Samsung phones, with different results, but still no success.
Odin3v304 does flash the recovery successfully, but the previous CWM's made for the older ICS based Reverbs do not boot when i finally get into Recovery mode with the OutOfBox 4.1.2 Reverbs.
Something has changed with the JB 4.1.2 pre-installed Reverbs that is not allowing the commonly know JB roots via Odin.
I really just want to put an older ICS build on this phone because of the TouchScreenLock issues it has with any JB build...
Anyone had success with newer Samsung Galaxy Reverb SPH-M950 Virgin Mobile that came with JB 4.1.2 pre-installed?
I notice the Kernel Version is dated April 30 of this year...hint?
NOTE: I have not Activated the phone yet (not sure that makes a difference)
Carrier
Virgin Mobile
Mobile Network Type
EvDo-rev.A:8
PRL Version
61009
Model Number
SPH-M950
Android Version
4.1.2 (Out of the Box)
Baseband Version
M950VPBMD6
Kernel Version
3.0.31-1175366
[email protected] #1
Tue Apr 30 02:46:07 KST 2013
Build Number
JZO54K.M950VPBMD6
Hardware Version
M950.07
Try this *#9090#
Try this *#9090#
galets said:
I got myself a Samsung Galaxy Reverb M950, which was on sale for $100. Seems the phone is so new that noone hacked it yet, here are a couple that work for me:
Please post feedback into this thread, I will try to summarize them here.
ROOT
Follow instructions at http://androidforums.com/reverb-all-things-root/652290-root-reverb-no-pc-required.html
ODIN:
Download mode for ODIN key combo: power button + volume down
for Windows users: drivers are on Samsung website: http://www.samsung.com/us/support/owners/product/SPH-M950DAAVMU#
How to rip firmware?
unknown.
How to I turn the phone into modem mode, for QPST access?
Here's what somewhat worked for me: http://forum.xda-developers.com/showthread.php?t=1626638
I used script for diag+adb for galaxy s III:
Code:
#/system/bin/sh
# sets DIAG mode
echo 0 > /sys/class/android_usb/android0/enable
echo 04E8 > /sys/class/android_usb/android0/idVendor
echo 6868 > /sys/class/android_usb/android0/idProduct
echo diag > /sys/class/android_usb/android0/f_diag/clients
echo 1 > /sys/class/android_usb/android0/f_acm/instances
echo diag,acm,adb > /sys/class/android_usb/android0/functions
echo 1 > /sys/class/android_usb/android0/enable
start adbd
I also extracted COM driver in a following manner:
1. Download drivers from Samsung website: http://www.samsung.com/us/support/owners/product/SPH-M950DAAVMU#
2. using 7zip, extract all contents from the file SAMSUNG_USB_Driver_for_Mobile_Phones.exe
3. modify contents of 25_escape\ssuddmgr.inf, replacing "USB\VID_04E8&PID_6868&DevMgrSerd" with "USB\VID_04E8&PID_6868&MI_01". After that, update drivers on "CDC Serial" device, and it becomes "SAMSUNG Mobile USB At Command Port"
QPST still doesn't recognize the phone
Service codes
##786# - info
##33284# - debug (lock code 777468)
Using Phone on PagePlus
UNKNOWN WITHOUT QPST
Click to expand...
Click to collapse
Read MSL on 4.1.2
below will get you MSL assuming you have root on 4.1.2 reverb
at terminal issue
su -c am broadcast -a android.provider.Telephony.SECRET_CODE -d android_secret_code://HIDDENMENUENABLE
after this enable hidden menus on phone..
then issue
su -c am broadcast -a android.provider.Telephony.SECRET_CODE -d android_secret_code://IOTHIDDENMENU
Thanks to AdamOutler here: http://forum.xda-developers.com/showthread.php?t=2077653
on phone hit test mode and in touch here box input 088, thanks to:
Nickaclick on cricketusers for this..
This phone get connected to qpst.. My problem is it wont work in roaming.. I also have it 16 digit password.. if anyone interested in research i will post it...
you neeed to be on ICS... You can return back of complete ICS stock via nandroid backup available on androidforums...
pit file for this device
Hello, is there anyway to get the "pit file" for the VMU_SPH-M950 O.O.B 4.1.2
Thanks & sorry if posted in the wrong thread!!!
THe VM Samsung Galsaxy REverb is sale again for $99 . Worth getting for progamming on Page Plus Cellular ? A run through for doing that is appreciated .
bamx2 said:
THe VM Samsung Galsaxy REverb is sale again for $99 . Worth getting for progamming on Page Plus Cellular ? A run through for doing that is appreciated .
Click to expand...
Click to collapse
I would go with something else for the following reasons:
1. Way too hard to program (if possible at all)
2. You will be stuck with no firmware updates, 'cuz the phone is not really popular
Personally for myself, I've moved on to S3.
16 digit password
stevestone said:
This phone get connected to qpst.. My problem is it wont work in roaming.. I also have it 16 digit password.. if anyone interested in research i will post it...
you neeed to be on ICS... You can return back of complete ICS stock via nandroid backup available on androidforums...
Click to expand...
Click to collapse
Hi, can you give 16 digit password?
I am trying to repair the MEID.
DFS tools keeps giving error, SPC not found. The default 000000 is correct but when I try to write, it gives this error.

[FIX] Unknown USB device (Device Descriptor Request Failed) Fastboot Windows 10

First of all, I have a HTC Droid DNA. I was searching for about a year. Finally I got a solution for my problem and I know some of you are still out there with no solution.
The Fail Code is: Unknown USB device (Device Descriptor Request Failed)
Windows has stopped this device because it has reported problems. (Code 43)
So I found a German solution where you have to go to regedit.
Step 1: You need to install the HTC drivers (Google, Samsung etc...) in the normal mode your PC will find your phone, but when you turn into Fastboot you get that error "Unknown USB device (Device Descriptor Request Failed) "
Step 2: Make sure you see that error in your Device Manager under USB - Controller
Step 3: Open "regedit"
Step 4: Navigate to : HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags
Step 5: Create a new Key called
0BB40FF00100
Step 6: In that Key you create a Binary Value
Name: SkipBOSDescriptorQuery
Value: 01 00 00 00 (ignore the "0000" at the beginning)
Step 7: Reconnect the Phone and enjoy your FIX
I hope I helped you. I can just tell you that it worked for me. I m not sure if it works on all HTC devices.
tried it with a S7 right now, didnt work. thanks for your post tho!
Had the solution for windows 8.1, from a blog on microsoft MSDN. (Sorry can't link to it. Since I'm new @ xda)
But as it turned out the Datatype for SkipBOSDescriptorQuery has changed from windows 8.1 to 10. Instead of a DWORD Value in Windows 8.1 it should be a Binary Value in Windows 10 .
So thanks :good: Now I can connect via fastboot to my HTC Incredible S.
Ps. Google this:
why-does-my-usb-device-work-on-windows-8-0-but-fail-on-windows-8-1-with-code-43
And blogpost will show as top result
Thank you very much the regedit method worked for sure..
I spent 5 hours on my computer and laptop different usb cables different ports installing uninstalling drivers and ADB nothing
Thanks BoBo Rich:good:
Thnx!!
Didn't work for HTC Explorer (Pico)
Worked with the HTC Aria on Win10 x64!
Thanks a ton.
edit: Hrm. Seems to have cropped up again. Time to continue the battle *sigh*
edit 2: Got it! Thankfully I had a Win7 laptop that I was able to fire up. The HTC Aria's fastboot hardware ID is "USB\VID_0BB4&PID_0FFF&REV_0100" which means the vvvvpppprrrr is 0BB40FFF0100. So follow the instructions above but using the key of 0BB40FFF0100
Has anyone else gotten this to work?
My Pixel XL isn't recognized at all when plugged in while in system, but it shows up as unrecognized when plugged in while in fastboot. But despite installing the drivers, Windows still refuses to recognize the phone. I tried the various solutions in this thread, but none of them worked. Perhaps it's because my Pixel's fastboot hardware ID is different, but I can't seem to find out what it is.
work perfectly for htc one xl (evita). Thanks !!
Thanks
After 48 Hours of searching!! thanks man! HTC ONE S (Ville)
Thanks! I have this problem with my Shield TV Pro, will try this after work.
Here's some PowerShell code for doing the registry editing, if anyone is interested.
Code:
#Requires -RunAsAdministrator
[string] $Path = 'HKLM:\SYSTEM\CurrentControlSet\Control\usbflags\0BB40FF00100'
[string] $Name = 'SkipBOSDescriptorQuery'
if ($false) {
# Create the path if not exist
if (-not(Test-Path -Path $Path)){New-Item -Path $Path -ItemType 'Directory'}
# Set "SkipBOSDescriptorQuery" to $true
Set-ItemProperty -Path $Path -Name $Name -Value 1 -Type 'DWord'
# Set "SkipBOSDescriptorQuery" to $false
Set-ItemProperty -Path $Path -Name $Name -Value 0 -Type 'DWord'
# Remove item
Remove-ItemProperty -Path $Path -Name $Name
# Remove path and item(s)
Remove-Item -Path $Path -Recurse -Force
}
Edit: This did not work for my Shield TV 2015 Pro unfortunately..
The error changes to "Port Reset failed". Error code remains the same 43. In my case I am trying to connect an LG G3 D858HK. I have tried many different cabels but no solution.
Unknown usb device error Motorola
Doesn't work on lg v20... Haven't been able to fix this issue for a while now..
Thanks for the info mate !
The registry key worked just great in my Windows 10 x64 computer at home and at my work laptop.
I have a Huawei P9 mobile Device.
Had this issue and nothing i tried seemed to work.
Your key did.
Thanks again !!!:good::good:
V20 Method prior to attempt....
@texas### whos still having trouble with a V20 stuck in the firmware screen ( like me) and I have a theory so I'm posting this prior to attempting it but someone please let me know if I have this wrong.
I read this post on the first page of the thread by someone whos name I've forgotten now (sorry) but they wrote....
--------------- edit: Hrm. Seems to have cropped up again. Time to continue the battle *sigh*
edit 2: Got it! Thankfully I had a Win7 laptop that I was able to fire up. The HTC Aria's fastboot hardware ID is "USB\VID_0BB4&PID_0FFF&REV_0100" which means the vvvvpppprrrr is 0BB40FFF0100. So follow the instructions above but using the key of 0BB40FFF0100 -----------------------
and based on this --- my V20 hardware ID reads "USB\VID_0000&PID_0002\5&2BF451F8&0&2" or rather the instance path does and using this I should be able to correct the value of the binary string to fit this corresponding ID for the VVVVPPPPRRRR correct? so value will be "0000000252BF451f02" ????
Im making the key and binary value now and I'll repost results later
I'm so invested in this phone both in time and sheer ignorance of what else I can do to get this damn thing out of the firmware screen.
* I've tried loading the "LG drivers from both LG composite device and VZW versions" to no avail.
*On a side note, tapping the power button brings up a "download mode" sub screen where is searches for wifi connections and after finding mine I went ahead and tried to connect 1- normally 2- removing my wifi password 3- using the WPS button to connect, all of which ended in "connection failed" so can someone explain the actual purpose of this option if there is no way to connect? or am I finding the wrong signal so to speak>?
Thanks
I'll gladly post all of my results or screen shots, (all failed so far) using ADB, uppercut, LGUP, odin, placing TOT files on the SD card, plus a few absolutely embarrassing methods but had to try something.
Please tell me someone knows a way out of this
Otherwise start a *.bat file containing
Code:
REG ADD HKLM\SYSTEM\CurrentControlSet\Control\UsbFlags\0BB40FF00100 /v SkipBOSDescriptorQuery /t REG_BINARY /d 01000000 /f
or use this in the Run window that you can call by pressing the Windows button and R, Win+R.
DEAD
Hi
Hope there's still anyone here that could help. I got the same error {The Fail Code is: Unknown USB device (Device Descriptor Request Failed) Windows has stopped this device because it has reported problems. (Code 43)} that appears on windows when watch is connected and i press the red button. I tried to get the identifier via device manager and microsoft message analyzer but it is not detected. What else can i do?
Thanks!
didnt work for the V40. anyone got any ideas?
SuperMike393 said:
didnt work for the V40. anyone got any ideas?
Click to expand...
Click to collapse
Have you tried going to device manager > universal bus controllers, right click USB Root Hub and unintall. Restart the PPC/Laptop and reconnect the device. It works on both Xiaomi and other brands as well.

Categories

Resources