Why dosent my phone react to profile change? wm 6.1 - General Questions and Answers

Hi guys,
I need your help. Im using a Asus p750 running wm 6.1. It seems that the phone dosent care to what profile im using. If i have phone on "silent" without ring signal or vibra still the phone rings at a incoming call. Same on all profiles i use. Always a ring signal!!! Total newbie so hoping for a easy fix. Maybe you expers have any ideas?
I have tryed to use SPB phone suite, same problems with thoose profiles. Phone dosent seem to care what profile i shoose to use.
Cheers.
/Jonas

Are you sure you are turning down the ring volume and not just the system.

Thnx for you answer Joel.
I set profile by Settings - Profile - Silent/Meeting etc. If i shoose Silent (Volume:Off Vibrate:Off) and i go back to the homescreen i notice a speaker icon with a X next to it. So i guess i have shoosen correct to get a silent incoming call? Dosent happen though, phone screams like a pig when i get a incoming call. Im i doing something wrong?

tap the speaker icon in the bar and you should get a pop up with two sliders, one for system sound, one for ringer, turn the ringer all the way down and try it again.

Both ringer and System sound are set to lowest and OFF. Still a ringsignal when a incoming call. Was just in a meeting where i bragged about the meeting sceduler that sets phone to meeting profile by auto. Ye right i had 3 incoming calls disturbing that meeting. Argh.

Ahh im using Inesoft Phone Suite and that stupid software uses its profiler and it seems to override all other profilers. Great, now i know what the error is... to bad you cant disable just the profiler... good software othervise..

Ver 5 let's you turn off the Profiler.... but... it doesn't actually turn off... whatever Inesoft profile it was set to when you disable the profiler remains active...
Really annoying... and their support seems non-existent...

Related

Why does Windows Mobile changes to vibrate automatically?

I have an HTC Titan running WM 6.1 (with nueExtROM), but had this problem with Sprint ROM as well.
I use the HTC Home Plugin with the Normal sound profile. However, when my phone is idle for a long time it will switch to vibration mode automatically. This is really annoying because I'll miss calls when the phone's on the charger in another room. If I switch back to the sound profile tab, Normal is still selected. How do I prevent my phone from going into vibration mode automatically?
Also, what does the Automatic sound profile do?

Fuze does not ring...

On incoming calls, my Fuze does not ring. I have it set to 'vibrate and ring' and it only vibrates. I have changed ringtones, ring settings, turned it off and back on, soft reset, pulled the battery out, etc and nothing will make my phone ring. All other notifications work (alarms, text messages, etc) and it will work on speaker phone once a call is connected. Is there any advice? I am trying to avoid a Hard-reset because I have the device set-up perfectly to my tastes...
jimmynotch said:
On incoming calls, my Fuze does not ring. I have it set to 'vibrate and ring' and it only vibrates. I have changed ringtones, ring settings, turned it off and back on, soft reset, pulled the battery out, etc and nothing will make my phone ring. All other notifications work (alarms, text messages, etc) and it will work on speaker phone once a call is connected. Is there any advice? I am trying to avoid a Hard-reset because I have the device set-up perfectly to my tastes...
Click to expand...
Click to collapse
What format is the ring tone in?
My ringtone is the 'Oldphone2' and it is set at'vibrate and ring'. It just spontaneously started this non-ringing thing this morning prompted by no changing of settings. As I said, I tried messing around with the setting after it stopped ringing, but to no avail. And the frustrating thing is that everything else seems to work fine. Argh!
This may seem silly, but have you checked your ring volume? I've had a situation a few times, for no apparent reason after disconnecting from Activesync, where my ring volume was down to 0. Just a thought.
I HAVE SAME PROBLEM, when you turn all to vibrate only and turn it back up . the ring stop working
Yes. all volume settings are up. ringer volume, call volume, media player volume.... Any other suggestions?
i had the same problem just now.. but changing the ringtone back to the ATT default one fixed it. I also use S2U2 and changing the setting for "vibrate when answered" or something like that seems to have fixed it as well.
Hope that helps.
what is S2U2? I have tried changing the ringtone back to ATT default and fiddling with the settings... No help there. This is frustrating. I have to keepmy phone on my desk in front of me so I dont miss any calls. I miss them if the phone is in my pocket.
jimmynotch said:
what is S2U2? I have tried changing the ringtone back to ATT default and fiddling with the settings... No help there. This is frustrating. I have to keepmy phone on my desk in front of me so I dont miss any calls. I miss them if the phone is in my pocket.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=412418
this happened to me too and i hard resetted. that fixed it , then it started again. come to find out th eproblem was when i hit the volume key on the side i turned system valume up and didnt click on ringer volume to turn it up . i had to smack myself
do texts ringer still work?? if so then im pretty sure you have the same problem i had, check it. good luck though
Do you have the unit face down? It has an auto mute when face down.
I also have an alarm problem, although lights go off, the alarm doesn't ring. I also have problems with ringing on incoming calls. The speaker otherwise works fine. Volumes are turned on appropriately. I have Natfv4.0 installed. Do any of the roms fix this problem?
So somehow the problem fixed itself. Dont know how as I didnt even touch my phone for two days. I just turned it on and -BOOM- it rang a few minutes later. Totally spontaneous issue. Really strange this phone is sometimes...
Boy, do I feel dumb.....Never even noted the un hi-lighted RING volume TAB...
I guess I can't use THAT excuse for not answering calls...
Thanks
Ron
I've been having the same problem. It's very baffling to say the least. I believe it was caused by the newer versions of S2U2. Don't know if it's been discussed in that thread or not. Both times this ringer 'glitch' has occurred, it's been when I've password protected S2U2 in settings. The issue was fixed by turning the password protection off, restarting S2U2, soft resetting my Fuze.
I am having the same problem with incoming calls not playing the ring tone and missing calls. I can guarantee you that the system/ring volume controls are at maximum. I have switched ring tones to no avail. It seems to have something to do with changing the ring type from ring to increasing ring and or visa versa. When I change ring type the problem exists. If I turn system/ring volume to silent and then back to maximum it plays the ring tone just fine. There is a bug in there somewhere! I also see a 'send text' lower left of screen and I hear a blurp sound or two in the background wihile the ringtone is playing when the phone is ringing. Anyone else have any issues like this? If so or you have a fix please send it to [email protected] I'm new to this forum stuff and don't really know how to use it. Hope I didn't break any rules.
Thank you,
Trent Alexander
I just have the callers complaining that I take too long to answer the phone. I called myself, and it took 3 1/2 rings for my Fuze to ring...anyone else?
Great PPC, Lousy Phone
Mine too. I just tried it and it does not ring until seven seconds after the light starts flashing. Not only that, it will not retain a custom ring tone. I try to use Old Phone 2 but it reverts to the default on its own.
My vario iv also suffers from the missing ring tone- reboots sometimes help but not always.
I too have had to learn not to rely on the alarm- goes off some days and then not on others.
Just now I thought that I would try to play an mp3 to see if that works- I pressed play and then waited for the track to start- no sound- seconds later the screen changed and touchflow launched itself (again) went back to the home tab and the sound is back?????
Same problem... it stopped ringing...
one thing I notice is that if the number calling is private or block it will only light up (no ring) but from a caller with Caller ID open the phone will ring...
strange...

Mute everything but the ringer at night?

I don't have a land line & leave my phone charging on my headboard at night. My wife has gotten really ticked at it vibrating & making noise whenever it gets an E-mail in the middle of the night.
Is there an easy way to mute everything but the normal phone ringer (still want to get calls in the middle of the night if they come in)? I don't want to mute the phone entirely, as I could miss emergency calls. I'd love to have it quiet everything at a certain time, or at the push of a button, or by running an app or something easy.
The wife is currently threatening to fling my phone out the window if it wakes her up again, & I don't want to disable the sound/vibrate entirely as it wouldn't be effective during the day.
Devin
AT&T Fuze
Currently running some build of Energy ROM with WM 6.5
a couple options...
Change Activesync to use off-peak times and set email delivery as manual so that you have to tell it to check for mail during off-peak times. Then you will only get sounds emergency calls, drunk dials, emergency texts, and drunk texts in the middle of the night. This also assumes you don't have any reminders set to sound at midnight...
Use a profile app like G-Profile or PhoneAlarm to control advanced automatic switching of profiles/sounds/notifications based on time of day and day of week or other advanced switching options.
the version of htc volume overlay i have lets me turn the volume down on system all the way while keeping the ringer one up.

[HELP] Low vibrations

Hello, i have a little problem, when I had my old phone HTC Artemis (P3300) I had it mute and set only on vibration. When i had my phone in pocket I felt it everytime when i had incoming phone call or sms. Now with my Leo, whe i set my phone to vibration only mode I often didn't recognize if someone really calling. Don't feel anything... Is it possible that Leo has lower vibration than my old Artemis?
If yes, is any way how to make it vibrate more?
ThX
set it to vibrate not silent and see if it helps
dunno about vibrating more or something. not sure if it is posible... all I know is there is an app i had see in opnmarket that changes the vibration pattern. see if that helps too
cheers
Do you have a rubber case on? I also had this issue and when I removed the rubber case the vibration was stronger.

[Q] Disable all sound when on silent?

Hey all,
When I put my phone onto silent I expected it to never make a sound except for alarms. However when any app generates an error message it still makes the system error beep.
This is highly inconvenient considering I'm using the phone in lecture theatres because my lecturer is away and the guest lecturer can barely speak English let alone write in it.
How do I make silent mode actually mean silent? (also I still want these notification and error beeps when on ringer mode)
Cheers,
Cru
PS Mango, DFT, Trophy
CruciasNZ said:
Hey all,
When I put my phone onto silent I expected it to never make a sound except for alarms. However when any app generates an error message it still makes the system error beep.
This is highly inconvenient considering I'm using the phone in lecture theatres because my lecturer is away and the guest lecturer can barely speak English let alone write in it.
How do I make silent mode actually mean silent? (also I still want these notification and error beeps when on ringer mode)
Cheers,
Cru
PS Mango, DFT, Trophy
Click to expand...
Click to collapse
hmm, to make mine silent I make sure Ringer and vibrate is set to off in Settings/ringtones and sound. Also check off anything at the bottom of the same page (play sound for), e.g. reminders, all other notifications..
then for good measure I turn the volume down all the way to 0. Maybe not exactly what you want
It worked but I was hoping to not have to do that everytime I want to use silent mode
Sent from my Spark using XDA Windows Phone 7 App
CruciasNZ said:
It worked but I was hoping to not have to do that everytime I want to use silent mode
Sent from my Spark using XDA Windows Phone 7 App
Click to expand...
Click to collapse
yeah, wish there was a one tap setting to set it to silent.
Kinda seems a step backwards from the old phones where you could customize sound profiles

Categories

Resources